hi guys...anyone had experience with this phone..its stuck on logo..i try to flash it with sp flash tool but i get error and also try to flash with sd card but always get fail...anyone know how to repair it or give me link with instructions and right firmware for this phone...its a pain in the a.. for me but its from a frend and this phone is for some reason important for him..thaks in advance
Related
i have boght dell streak a few days ago from best buy with an at&t lock
with 1.6 android and 6601 build.
i have tried to root the divice but probebly used a bad rom or incorrect version of rom, i have flashed it with fast boot and the divice wont turn on i have tried to recovery from power+volume keys but with no success i have tried to flash it sevral times with diffrent vrsions of img and also with out success and now when i pres the recovery from sd recovery the screen go blcak and glowing.
i d'ont have any more ideas somone has a soulotion.
First of all just stop guessing... that will cause more harm then good.
What you want to do is get the QDL tool from streakdroid.com and select their GUIDS page then follow their instructions. They have videos and FAQ's that will help walk you through the process. I could explain for you, but they have it down perfctly.. If you get stuck on any one of their steps please let us know and I will try to help explain.
Good luck!
Hi
I'm new her and sorry for my bad English
I have a wiko lenny phone a few days ago my phone stuck on wiko logo on welcome screen and blocked there even if I tried to charge it battery logo appears without percentage of charging and the screen always power on and red led not working so i flashed it by sp flash tool but didn't work although sp flash tool program said phone flashed successfully!!
I can't hard reset it because it says : CANNOT GET ENCRYPT STATE
so please anyone can help me...
thanks
any help please...
I'm still waiting...
Flash
Flash the stock rom again :3 search for it on needrom
Give a flash with latest STOCK ROM for your device, after flashing still getting boot-loop give a hard reset It should work after reset.
For Flashing U need
1-USB drivers
2-Latest Flashing Tool
3-Latest Stock ROM
STOCK ROM check HERE
2nd LINK HERE
Also please provide us Complete info of your device.
Thanks
So I tried to flash TWRP with Flashr on my J3, but when I booted into recovery a blue screen came up saying that system software not authorized by AT&T was found on your device. I got nervous and decided to flash a stock firmware on to my J3, but it fails every time. I finally got to like 10% but then it failed and a blue screen saying,"An error has occured while updating the device software. Use the Emergency recovery function in the Smart Switch PC Software." Smart Switch crashes every time I put in my serial number though so now I'm stuck with a bricked phone. Any help would be greatly appreciated :fingers-crossed:
lolcoder124 said:
So I tried to flash TWRP with Flashr on my J3, but when I booted into recovery a blue screen came up saying that system software not authorized by AT&T was found on your device. I got nervous and decided to flash a stock firmware on to my J3, but it fails every time. I finally got to like 10% but then it failed and a blue screen saying,"An error has occured while updating the device software. Use the Emergency recovery function in the Smart Switch PC Software." Smart Switch crashes every time I put in my serial number though so now I'm stuck with a bricked phone. Any help would be greatly appreciated :fingers-crossed:
Click to expand...
Click to collapse
Try flashing again with Odin, but this time use older versions, maybe v3.10.6 or v3.09.
Solution
I flashed a random root file that I found on another xda post and it managed to boot.
lolcoder124 said:
I flashed a random root file that I found on another xda post and it managed to boot.
Click to expand...
Click to collapse
Next time, try not to flash files blindly, because any file that is wrong can brick your phone.
Hello after trying to use SPFLASH TOOL to flash my device because i had logo screen loop i end up formating everything and now my phone doesn't start but if i plug in to my computer i can hear the sound of plug in and out, i can still use spflash tool but i have black screen on my phone so i'm here asking for someone to help me find a way to fix this, do i have to build a new rom or system? Just tell me what to do because after Searching the whole internet after my phone i can't find much stuff.
Any help would be appreciated.
What phone model is it bro?
Sorry for not answering in time bro but i finally fixed my phone i had to reinstall like re-flash the entire phone.
My phone is a Qilive Q4 |7 auchan but i already fixed my problem i had trouble finding the stock rom for it since qilive aparently doesn't have any kind of support page but lucky that i found it.
Thanks anyway.
hi guys, so i got a really big problem with my leeco. first i bricked my leeco by inputting the wrong code trying to unlock the bootloader, so i used the sp tool to try and flash the unbrick rom found in other threads....i did everything correctly, unticked the recovery and boot and the rest of the stuff but after the flashing process begins after 3mins ,it would stops and gives me and error and the colour of the flashing process below never changed to yellow still remained red till it gave out and error so i panicked and stupidly used the auto flash part of the sp flash tool , now anytime i try to flash the unbrick rom with the sp flash tool...it keeps giving me this error
''error status brom cmd send da fail 0xc0060003'' , yes i tried changing the Da_PL_High to Da_br also to Da_PL , It still keeps giving me the same error ''error status brom cmd send da fail 0xc0060003", is the phone completely dead? so i can take my mind off it:crying:
i have read all the leeco threads here tried it all, nothing works....pls any help will be of use, thanks in advance
bizzytheone said:
hi guys, so i got a really big problem with my leeco. first i bricked my leeco by inputting the wrong code trying to unlock the bootloader, so i used the sp tool to try and flash the unbrick rom found in other threads....i did everything correctly, unticked the recovery and boot and the rest of the stuff but after the flashing process begins after 3mins ,it would stops and gives me and error and the colour of the flashing process below never changed to yellow still remained red till it gave out and error so i panicked and stupidly used the auto flash part of the sp flash tool , now anytime i try to flash the unbrick rom with the sp flash tool...it keeps giving me this error
''error status brom cmd send da fail 0xc0060003'' , yes i tried changing the Da_PL_High to Da_br also to Da_PL , It still keeps giving me the same error ''error status brom cmd send da fail 0xc0060003", is the phone completely dead? so i can take my mind off it:crying:
i have read all the leeco threads here tried it all, nothing works....pls any help will be of use, thanks in advance
Click to expand...
Click to collapse