Hi,
I bought tablet Voyo vbook i7 plus.
Very good tablet. But just noisy and poor speakers only.
I decided to flash bios with the last 2018-07-27 firmware.
Now it is not working: when power on, just blue led, not starting, no screen on.
Is there someone can help? Example: to send me old firmware or where to download previous firmware?
Thanks in advance for any help!
Best regards
I have the same situation. I switched the bios to compatibility mode to get booting from the flash drive in legacy mode instead of efi. Now it is not working: when power on, just blue led, not starting, no screen on. HELP me!
Hello,
I also buy a voyo i7plus tablet. I was very happy exepter a little bug a little painful: on battery in less than 50% battery the tablet had a tendency to go out ... which led me to want to update the bios ..
So I am in the same situation .... I wanted to update the bios with the files downloaded on the website of Voyo and when power on, just blue led ans black screen…
I think the only way out of this bad situation is to flash the bios chip with a ch341 programmer. I tried to do it with the file provided ur quote: "300t_8m.bin" but no change ....For that we need a valid bios .....
If anyone can provide us one, it will save us our tablets ....
thank you in advanceI
Jboufr31 said:
Hello,
I also buy a voyo i7plus tablet. I was very happy exepter a little bug a little painful: on battery in less than 50% battery the tablet had a tendency to go out ... which led me to want to update the bios ..
So I am in the same situation .... I wanted to update the bios with the files downloaded on the website of Voyo and when power on, just blue led ans black screen…
I think the only way out of this bad situation is to flash the bios chip with a ch341 programmer. I tried to do it with the file provided ur quote: "300t_8m.bin" but no change ....For that we need a valid bios .....
If anyone can provide us one, it will save us our tablets ....
thank you in advanceI
Click to expand...
Click to collapse
Yes, let's find working bios.
tabletest said:
Hi,
I bought tablet Voyo vbook i7 plus.
Very good tablet. But just noisy and poor speakers only.
I decided to flash bios with the last 2018-07-27 firmware.
Now it is not working: when power on, just blue led, not starting, no screen on.
Is there someone can help? Example: to send me old firmware or where to download previous firmware?
Thanks in advance for any help!
Best regards
Click to expand...
Click to collapse
I have one for you. Got the same scenario, but I saved original bios to a file prior to flashing. Its working, just raised from the dead!
imbartiv said:
I have one for you. Got the same scenario, but I saved original bios to a file prior to flashing. Its working, just raised from the dead!
Click to expand...
Click to collapse
Hi,
Can you please send us a link for bios to save our tablet?
Thanks so much.
BR
bb42400 said:
Hi,
Can you please send us a link for bios to save our tablet?
Thanks so much.
BR
Click to expand...
Click to collapse
Could you send me the bios, too? Thanks.
Bios rescue.
imbartiv said:
I have one for you. Got the same scenario, but I saved original bios to a file prior to flashing. Its working, just raised from the dead!
Click to expand...
Click to collapse
Could you send me the bios, please? How could I charge it in my voyo i7 plus? Thank you very much.
I have found a solution. The tablet has a botton bios reset just back. If you put it over 30s, the bios came back to original. I hope that it help you. Thanks
imbartiv said:
I have one for you. Got the same scenario, but I saved original bios to a file prior to flashing. Its working, just raised from the dead!
Click to expand...
Click to collapse
Could you send me the bios, too? Thanks.
imbartiv said:
I have one for you. Got the same scenario, but I saved original bios to a file prior to flashing. Its working, just raised from the dead!
Click to expand...
Click to collapse
Could you send me the bios dump?
Thanks.
eduar7221 said:
Could you send me the bios, please? How could I charge it in my voyo i7 plus? Thank you very much.
I have found a solution. The tablet has a botton bios reset just back. If you put it over 30s, the bios came back to original. I hope that it help you. Thanks
Click to expand...
Click to collapse
Sorry, where is the botton to reset back the bios?
Thanks
Answer
mkmkwong said:
Sorry, where is the botton to reset back the bios?
Thanks
Click to expand...
Click to collapse
behind the flap that moves, on one of the sides. It is a small hole, so you can insert a stick, clip or something similar.
eduar7221 said:
behind the flap that moves, on one of the sides. It is a small hole, so you can insert a stick, clip or something similar.
Click to expand...
Click to collapse
Thanks.
I find it & pressed it but the screen is still black when power on.
Answer
mkmkwong said:
Thanks.
I find it & pressed it but the screen is still black when power on.
Click to expand...
Click to collapse
You have to press it during 50-60s, then you could turn on.
Working clear BIOS w/o EC
Not work touchscreen and WiFi. Tablet work.
I can't post attachment or link
Hi everyone.
Maybe someone have a EC part of BIOS for this tablet?
Thank you.
imbartiv said:
I have one for you. Got the same scenario, but I saved original bios to a file prior to flashing. Its working, just raised from the dead!
Click to expand...
Click to collapse
Please, send me original BIOS. I have the same problem(((
Jb23J said:
Please, send me original BIOS. I have the same problem(((
Click to expand...
Click to collapse
Hi.
I can send you original BIOS but touch screen + WiFi won't work. If it will be OK for u send me PM with your email.
Please send me the BIOS and the EC part
imbartiv said:
I have one for you. Got the same scenario, but I saved original bios to a file prior to flashing. Its working, just raised from the dead!
Click to expand...
Click to collapse
Hi,
Can you please send me the BIOS File as well? I also tried to flash the EC part, so I probably need that too.
Thanks in advance!
Hello everyone, I am French and I translate with google.
I have a problem with my "VOYO VBook I7 Plus Intel Core I7-7500U" tablet.
I have a black screen, amber or blue power light on. I formatted the hdd and deleted the recovery partition, everything worked fine, I did "secure boot" to re-install windows 10 family with a usb key, it worked well and on 1st boot I got "l 'black screen', being French I cannot recover bios drivers, OS and firmware from the voyo site. I tried the reset for 2 minutes, as indicated on the forum, without success, the solution might be, if someone could send me a bios, I could maybe restart my tablet? ....
With many thanks
Related
Hi guys,
I was following this guide to upgrade my Sanei n10: http://forum.xda-developers.com/showthread.php?t=1821398
In recovery mode I have installed the rom.zip, but after I pressed the wrong button and it turned off.
Now, when I turn it on, leave the writing sanei and after few second remains on black screen.
If I try to entry in recovery mode with the vol+ button, it remains with the Android robot lying down with a red tiangolo, with no options.
What can I do to recover my tablet?
Thanks to all
---
Driver
idulkoan said:
instead of reflashing the rom, to get this device to boot you will probably have to reflash the sanei. This can be done with livesuit.
Click to expand...
Click to collapse
I can not find a driver that works ... Can you help me?
---
idulkoan said:
try these drivers:
Click to expand...
Click to collapse
Nothing... It doesn't work..
---
idulkoan said:
do you have skype? i can try to help you out through that
then if we get a solution ill post it here for the rest of xda to see lol
Click to expand...
Click to collapse
I have Skype, could you plz help me ?
Thanks in advance
Nrupesh
---
idulkoan said:
do you have skype? i can try to help you out through that
then if we get a solution ill post it here for the rest of xda to see lol
Click to expand...
Click to collapse
Hello,
I'm sorry for the time that has passed, I had to do ...
I'm back to grips with my Sanei N10 ... I also formatted the PC, but the drivers do not work!!
Thank you for your help!
---
idulkoan said:
What displays on the computer when you enter your sanei n10 into "flash mode" ? [When trying to flash it with livesuit]
Click to expand...
Click to collapse
the problem is that the pc don't recognizes the tablet.
when i plug in the usb cable, windows find a new device but don't install the drivers... I have tried with the file in the previous post but don't work...
I have a general device called "Android" without drivers...
then, livesuite or another software don't recognizes the tablet...
What I have to to?
up
hmm
---
Hi there, I am trying to install Remix OS as my only os for an HP 2140el netbook. I think it will make for a perfect solution. Unfortunately, I am having some issues:
I am able to install the OS from the 32bit usb stick by adding the INSTALL = 1 flag, however I am not able to boot into the OS once I turn the computer off. Probably because I have no other boot loader?
The "dock" is just a huge button on the right, and I don't seem to be able to find any setting to set it as every screenshot shows it to be.
Can you help me? Thanks
Did you install grub when installing the system?
Sent from my XT1095 using Tapatalk
lucasdeeiroz said:
Did you install grub when installing the system?
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
Yes!
Any ideas? I am open to try whatever you could come up with
kGospel said:
Hi there, I am trying to install Remix OS as my only os for an HP 2140el netbook. I think it will make for a perfect solution. Unfortunately, I am having some issues:
I am able to install the OS from the 32bit usb stick by adding the INSTALL = 1 flag, however I am not able to boot into the OS once I turn the computer off. Probably because I have no other boot loader?
The "dock" is just a huge button on the right, and I don't seem to be able to find any setting to set it as every screenshot shows it to be.
Can you help me? Thanks
Click to expand...
Click to collapse
hi, ive the same problem on my netbook the one about the dock and the big button sided to the right, if you got any soultions please contact me.
juampiq6 said:
hi, ive the same problem on my netbook the one about the dock and the big button sided to the right, if you got any soultions please contact me.
Click to expand...
Click to collapse
Unfortunately no solution atm. I just eventually gave up. Waiting for some updates on the project.
Hello. I have flashed my Lenovo Vibe K5, former build A6020a40_S004 to A6020a40_105, hoping for that VoLTE update. Following the proper steps and downloading the Stock ROM Firmware from trusted supplier, my phone won't boot into anything: recovery, or normal. Though the LED lights up when connected to a computer. However, it doesn't appear on my computer or hear that USB chime. I'm using a Windows 10 (which I've seen many have issues with Windows 10 and drivers) running on Bootcamp 6. I appreciate it if you guys could help me. Thank you very much.
By the way, I have no custom recovery installed. Just the basic Android System Recovery <3e> and I'm not that familiar with Android systems.
justinfinity09 said:
Hello. I have flashed my Lenovo Vibe K5, former build A6020a40_S004 to A6020a40_105, hoping for that VoLTE update. Following the proper steps and downloading the Stock ROM Firmware from trusted supplier, my phone won't boot into anything: recovery, or normal. Though the LED lights up when connected to a computer. However, it doesn't appear on my computer or hear that USB chime. I'm using a Windows 10 (which I've seen many have issues with Windows 10 and drivers) running on Bootcamp 6. I appreciate it if you guys could help me. Thank you very much.
By the way, I have no custom recovery installed. Just the basic Android System Recovery <3e> and I'm not that familiar with Android systems.[/Q
Click to expand...
Click to collapse
Well sorry to hear about that but I know very well how to recover from such situation. You'll need to flash the recovery IMG again so that it boots into recovery mode
Brawler leon said:
Well sorry to hear about that but I know very well how to recover from such situation. You'll need to flash the recovery IMG again so that it boots into recovery mode
Click to expand...
Click to collapse
Thanks! Can you tell me how? I've been researching about this as well for a long time now. Any help is appreciated.
Yes my bud. I will provide you the link shortly to some SDK tools so that you can flash your recovery IMG again and et access to recovery mode. I know that situation is chaotic and sucks but I am assuming that you aren't able to access twrp or anything.when you turn the phone on it gets stuck at lenovo and after few minutes it gets restarted on its own. And on connection g it to computer, it just doesn't get connected and nothing appears to be connected. I want you to take the battery out and place it again after few minutes and press the "vol down" button and "power button at the same time. You'll see the same lenovo icon but there will be something written in Chinese or something like that. Now connect your phone to your computer and I advise you to use a very good quality data sharing cable or original lenovo cable. Now your computer will recognise your phone as a hard drive or a storage device.i I'll try to upload a video on that too. Till then try these steps and lemme know if they work and your computer recognises your dead phone.if it does then there is still a hope left. BTW I was stuck in the same situation twice but thank god I saved myself and I am using my device. Note:- this method doesn't uses any software like " QFIL" or "QCOM" loader to flash stock firmware. Hope it works
---------- Post added at 05:30 PM ---------- Previous post was at 05:22 PM ----------
Just keep replying if it works and within a week you'll get your phone fully functional.
Here I have uploaded the platform tools needs d to flash recovery
Brawler leon said:
Here I have uploaded the platform tools needs d to flash recovery
Click to expand...
Click to collapse
Thanks a lot, man. Where the hell have you been all my life? Lol.
So my phone doesn't boot. It doesn't even show the Lenovo logo on it. Just mere darkness. :'(
I am going to Hong Kong later this week (this is where I bought the phone) and I don't know, maybe have someone fix it.
PS. Can you please DM me the links or if it isn't a loss for you you may just reply it here.
Thanks in advance and more power. The world needs more people like you.
Sincerely,
Justin
Sorry for responding late bud.but I am not able to post the link on this thread. If you have any e mail address then tell me so that I can mail you the links. And as you said your phone doesn't boot I want to ask you whether your phone charges when you connect it to the power and charging bar is shown or not. If yes then pls remove your phone battery and put it back and press the power button and the vol. down button hardly .if you see lenovo logo and something written in Chinese or something like that then you're on the way to get your phone back.just reply me the results soon bud
Brawler leon said:
Sorry for responding late bud.but I am not able to post the link on this thread. If you have any e mail address then tell me so that I can mail you the links. And as you said your phone doesn't boot I want to ask you whether your phone charges when you connect it to the power and charging bar is shown or not. If yes then pls remove your phone battery and put it back and press the power button and the vol. down button hardly .if you see lenovo logo and something written in Chinese or something like that then you're on the way to get your phone back.just reply me the results soon bud
Click to expand...
Click to collapse
Hey man. Justin here, again.
You may reach me through "[email protected]".
It doesn't show anything. Though, the LED light illuminates when connected to a power source or laptop. I'm starting to think it's absolutely hopeless. But please do message me anyway.
Fondly,
Justin
I think you have hard bricked your phone but still let's try
Brawler leon said:
I think you have hard bricked your phone but still let's try
Click to expand...
Click to collapse
Sure. I will wait for you in my e-mail. Thanks!
Brawler leon said:
Yes my bud. I will provide you the link shortly to some SDK tools so that you can flash your recovery IMG again and et access to recovery mode. I know that situation is chaotic and sucks but I am assuming that you aren't able to access twrp or anything.when you turn the phone on it gets stuck at lenovo and after few minutes it gets restarted on its own. And on connection g it to computer, it just doesn't get connected and nothing appears to be connected. I want you to take the battery out and place it again after few minutes and press the "vol down" button and "power button at the same time. You'll see the same lenovo icon but there will be something written in Chinese or something like that. Now connect your phone to your computer and I advise you to use a very good quality data sharing cable or original lenovo cable. Now your computer will recognise your phone as a hard drive or a storage device.i I'll try to upload a video on that too. Till then try these steps and lemme know if they work and your computer recognises your dead phone.if it does then there is still a hope left. BTW I was stuck in the same situation twice but thank god I saved myself and I am using my device. Note:- this method doesn't uses any software like " QFIL" or "QCOM" loader to flash stock firmware. Hope it works
Tried removing battery, its still in bootloop.
Click to expand...
Click to collapse
Man, im pulling my hair out trying to get this box working again.
Short brief: I bricked it lol. But Ive got it to connect to the PC again via the shorting it out trick.
I've flashed a couple of different iso's to no success.
Which I mean, it completed 100%, but once disconnected, it wouldn't boot up.
I just cannot find the specific one for my MXQ Pro.
As I said, the specs are
S905X
6.0.1 Marshmallow
H234_V2.2
2017-04-08 is whats written on the mother board.
I'm trying to flash it using USB_Burning_Tool 2.0.7.2
Ive probably wasted 100gig in downloads so far trying to find firmware thats compatible. I'm just about ready to throw it in the bin.
As a last ditch effort, does anyone know where I can find compatible firmware for this thing?
cheers
Xdegenerate said:
Man, im pulling my hair out trying to get this box working again.
Short brief: I bricked it lol. But Ive got it to connect to the PC again via the shorting it out trick.
I've flashed a couple of different iso's to no success.
Which I mean, it completed 100%, but once disconnected, it wouldn't boot up.
I just cannot find the specific one for my MXQ Pro.
As I said, the specs are
S905X
6.0.1 Marshmallow
H234_V2.2
2017-04-08 is whats written on the mother board.
I'm trying to flash it using USB_Burning_Tool 2.0.7.2
Ive probably wasted 100gig in downloads so far trying to find firmware thats compatible. I'm just about ready to throw it in the bin.
As a last ditch effort, does anyone know where I can find compatible firmware for this thing?
Click to expand...
Click to collapse
try this android 6.1 https://mega.nz/#!OpAATBTY!CY_KUix-gKUaAxecY8pREqu8Wi9WvkbSJNXhInKDzMQ
and this android 7.1 https://mega.nz/#!q4Y0xKbJ!W1-HBCiRGBgq_tW6AFzsbOUweRRs7ov8Cg6h92ILQi8
frake50 said:
try this android 6.1 https://mega.nz/#!OpAATBTY!CY_KUix-gKUaAxecY8pREqu8Wi9WvkbSJNXhInKDzMQ
and this android 7.1 https://mega.nz/#!q4Y0xKbJ!W1-HBCiRGBgq_tW6AFzsbOUweRRs7ov8Cg6h92ILQi8
Click to expand...
Click to collapse
Thanks, but no success.
Usb Control setup errors
Xdegenerate said:
Thanks, but no success.
Usb Control setup errors
Click to expand...
Click to collapse
in this case you need to open the cover again and write down which manufacture you have of thechip -- samsung or Ky hynix i think in your case maybe HX
you can try
https://drive.google.com/drive/folders/1eg_hjvzCzs0H2bGk_oEfuLKvynjlh-3u 7.1
frake50 said:
in this case you need to open the cover again and write down which manufacture you have of thechip -- samsung or Ky hynix i think in your case maybe HX
you can try
https://drive.google.com/drive/folders/1eg_hjvzCzs0H2bGk_oEfuLKvynjlh-3u 7.1
Click to expand...
Click to collapse
Which part am I looking at to figure out which one it is?
https://imgur.com/a/TTNyuV1
Edit: Oh, i think i see it.
SK hynix!
Xdegenerate said:
Which part am I looking at to figure out which one it is?
https://imgur.com/a/TTNyuV1
Edit: Oh, i think i see it.
SK hynix!
Click to expand...
Click to collapse
exactly yours NAND SK hynix manufacture ... only firmware with box had this nand will work.. if you flash firmware from Samsung box it will freeze at boot as you wrote at yours first post.
the pervious post i added link at google drv are Hynix Nand firmware.. you can also try and search after Docooler 4K box as they are Hynix too.... 4pda.ru had section with many firmware..
version from Docooler android 7.1 V1880-16G V2322 7.1 passed on your box
check here too
https://forum.xda-developers.com/an...ters/amlogic/docooler-m9s-pro-t3450711/page26
good luck
frake50 said:
exactly yours NAND SK hynix manufacture ... only firmware with box had this nand will work.. if you flash firmware from Samsung box it will freeze at boot as you wrote at yours first post.
the pervious post i added link at google drv are Hynix Nand firmware.. you can also try and search after Docooler 4K box as they are Hynix too.... 4pda.ru had section with many firmware..
version from Docooler android 7.1 V1880-16G V2322 7.1 passed on your box
check here too
https://forum.xda-developers.com/an...ters/amlogic/docooler-m9s-pro-t3450711/page26
good luck
Click to expand...
Click to collapse
well, the first link worked. It's booted up. Only problem is, the remote doesnt respond, it only allows me to push down. I installed the next one successfully too, but same problem. The remote only allows a down navigation. Pressing anything else won't work.
Keyboard and mouse respond just fine.
I've tried changing the remote files, even tried the Beelink one, but none of them are working.
I've tried two remotes, both doo the same thing.
The firmware is rooted.
One thing I'm seeing is a notification saying the SU binary needs updating. However the link I downloaded it from says not to, as it will cause a boot loop.
I'm wondering if perhaps when I opened the box and shorted it to read to usb burner, if maybe I damaged the reciever or something? However, when pressing buttons on the remote, pressing up does change the blue light to red on the box, so it is recieving something, just not doing what it should.
But pressing left or right does not change the light.
Edit. I've just discovered pressing up is actually being used as the return key, it backs out of apps.
None of the 4 files, or the Beelink file fix the issue.
Xdegenerate said:
well, the first link worked. It's booted up. Only problem is, the remote ..Edit. I've just discovered pressing up is actually being used as the return key, it backs out of apps.
None of the 4 files, or the Beelink file fix the issue.
Click to expand...
Click to collapse
Try this remote.conf unzip it and replace it in system/etc don't forget change the permission to 0644
frake50 said:
Try this remote.conf unzip it and replace it in system/etc don't forget change the permission to 0644
Click to expand...
Click to collapse
How do I change the permission?
Xdegenerate said:
How do I change the permission?
Click to expand...
Click to collapse
use attached RootExplorer
after you replace the file in place just remark it with long press with mouse.. then go to the top righ of the program and choice permission in windows open you can just right 0644 then hit OK
frake50 said:
use attached RootExplorer
after you replace the file in place just remark it with long press with mouse.. then go to the top righ of the program and choice permission in windows open you can just right 0644 then hit OK
Click to expand...
Click to collapse
No success
Remotes still acting the same way.
Well, in one way I've resolved this, but without resolving the problem.
I can't fix the blue tooth standard remote problem. I think i may have screwed something up when I was short circuiting the mother board.
However, purchasing an android remote that uses a usb reciever does the trick. I bought one of thoseveral android keyboard remotes. It works perfectly fine, only issue is I can't power on and off with the remote. I have to pull the power out or switch it off and on by the wall.
However there is another remote with a power button, I presume it would be able to power on and off. I'll mention this incase in future anyone has this issue.
Xdegenerate said:
well, the first link worked. It's booted up. Only problem is, the remote doesnt respond, it only allows me to push down. I installed the next one successfully too, but same problem. The remote only allows a down navigation. Pressing anything else won't work.
Keyboard and mouse respond just fine.
I've tried changing the remote files, even tried the Beelink one, but none of them are working.
I've tried two remotes, both doo the same thing.
The firmware is rooted.
One thing I'm seeing is a notification saying the SU binary needs updating. However the link I downloaded it from says not to, as it will cause a boot loop.
I'm wondering if perhaps when I opened the box and shorted it to read to usb burner, if maybe I damaged the reciever or something? However, when pressing buttons on the remote, pressing up does change the blue light to red on the box, so it is recieving something, just not doing what it should.
But pressing left or right does not change the light.
Edit. I've just discovered pressing up is actually being used as the return key, it backs out of apps.
None of the 4 files, or the Beelink file fix the issue.
Click to expand...
Click to collapse
What file did you use to get your box working again? I believe I am in the same boat as you on this and could use a life raft. Trying alternate imgs for other boxes is where I am at, as all images I find for this box (aside from one labeled red and black) will not copy to the box and get stuck at 7%.
If you have any pointers at all I would love to see some life back in this box. All I wanted was to update to 7.1. Damn.....
dwoycheshen said:
What file did you use to get your box working again? I believe I am in the same boat as you on this and could use a life raft. Trying alternate imgs for other boxes is where I am at, as all images I find for this box (aside from one labeled red and black) will not copy to the box and get stuck at 7%.
If you have any pointers at all I would love to see some life back in this box. All I wanted was to update to 7.1. Damn.....
Click to expand...
Click to collapse
Try my customised ROM, I have this installed on my MXQ pro 4K (1gb RAM), runs well, has drivers for my strange clone wifi chip (ethernet works better than the clone realtek wifi chip), Its minimal and de bloated and i have a new version coming probably tomorrow wich looks better, removed the purple ect... let me know how you get on, some advice oce through initial set up, go to settings, apps, and disable chromecast, then reboot, or it will fill your internal storage & my remote dont work, i use a usb wireless and also use the tv remote through CEC
New Versoin 6 added with many improvments updated 12/05/2202
https://forum.xda-developers.com/android-stick--console-computers/amlogic/rom-android-tv-custom-rom-7-1-2-s905x-t4098131
[Update]
Solved the issue
1. Go to this link 4pda . ru/forum/index.php?showtopic=399304&st=600#Spoil-55136455-3
(Of course without spaces)
Or just search on google for "4pda forum" then in the forum search for mdz 22 ab
2. You will find a tread with someone holding a mi box in hand. Enter and read the instructions, translate it because it is in russian.
3. Download usb tool and rom
4. Open box back plastic cover, inside you will see a metal cover. Remove it carefully with a tweezer. Careful not to scratch the board.
5. Install usb tool with drivers, unzip rom. Open usb tool, load rom, insert usb male in box and the other male in pc.
6. This is the tricky part. Click start, shortcircut with the tweezers the test point and the metal frame and PLUG IT
7.If done correctly it should recognize and start download.
8. If it gives an error, repeat, uninstall usb drivers, reinstall, retry. Mine worked after 20 attempts. You need patience.
THANK YOU VLADIMIR UHLIR FOR THE INSTRUCTIONS!
Hello, sometime ago I did a pretty stupid thing with an usb stick and wrote on my mdz-22-ab firmware for mdz-19... something..
Long story short is bricked.. only a red light in the back of the box, no signal to hdmi.. nothing else
Can you, please, be so kind and tell me if it is any way to unbrick it?
Thank you so much for your patience!
It seems not a lot of people made stupid mistakes like me!
mikescorei said:
Hello, sometime ago I did a pretty stupid thing with an usb stick and wrote on my mdz-22-ab firmware for mdz-19... something..
Long story short is bricked.. only a red light in the back of the box, no signal to hdmi.. nothing else
Can you, please, be so kind and tell me if it is any way to unbrick it?
Thank you so much for your patience!
Click to expand...
Click to collapse
Sorry, your box is scrooged. Hope you learned your lesson.....
Ask for a new box for Christmas
Me too. Just 2 days after purchase...
zsolarewicz said:
Me too. Just 2 days after purchase...
Click to expand...
Click to collapse
So, no fix?
mikescorei said:
So, no fix?
Click to expand...
Click to collapse
Tried all that 'magic', unfortunately nothing so far ((
successful unbricking
Hi, I had same problem like you. I fixed it using USB Burning Tool and flash image file from: 4pda forum (I'm not allowed to post link to external site)
You can find here mdz-22-ab image as well as instructions how to get your Mibox to "worldcup mode" (you have to disassemble device first), than you will be able to flash that image and bring your bricked Mibox back to the life. URL link for USB burning tool 2.1.7.3 is not valid, so I used version 2.1.7.0 which I found somewhere.
Hope it will help...
Thank you! You saved my device!
DexV said:
Hi, I had same problem like you. I fixed it using USB Burning Tool and flash image file from: 4pda forum (I'm not allowed to post link to external site)
You can find here mdz-22-ab image as well as instructions how to get your Mibox to "worldcup mode" (you have to disassemble device first), than you will be able to flash that image and bring your bricked Mibox back to the life. URL link for USB burning tool 2.1.7.3 is not valid, so I used version 2.1.7.0 which I found somewhere.
Hope it will help...
Click to expand...
Click to collapse
Can you contact me by email, please? [email protected] . com
It seems I cannot get the device to worldcup mode.. dunno which pins to short.
bricked mdz 22-AB
mikescorei said:
Can you contact me by email, please? [email protected] . com
It seems I cannot get the device to worldcup mode.. dunno which pins to short.
Click to expand...
Click to collapse
hi all
please i have this probleme too. bricked mibox s mdz 22-AB . i try and try to revive it but i dont know whos pins to short to connecte the device to burning tools. can you please share with me if you have any solution.
thniks
my mail [email protected]
crocodile61 said:
hi all
please i have this probleme too. bricked mibox s mdz 22-AB . i try and try to revive it but i dont know whos pins to short to connecte the device to burning tools. can you please share with me if you have any solution.
thniks
my mail [email protected]
Click to expand...
Click to collapse
Email sent
bricked mdz 22-AB
mikescorei said:
Email sent
Click to expand...
Click to collapse
hi
i receive your mail but no picture .jpg
can you please resend it
thanks
mikescorei said:
Email sent
Click to expand...
Click to collapse
hi
thak you very much bro. my mibox s 22-AB unbriked and revive succesful with this methode in the first time
best regard
Does your netflix, amazon and hbo go work? Mine are not working at all
mikescorei said:
Does your netflix, amazon and hbo go work? Mine are not working at all
Click to expand...
Click to collapse
Hello
not the versions in the rom. I had to install other versions from aptoid.tv
thanks
you saved my life !
crocodile61 said:
Hello
not the versions in the rom. I had to install other versions from aptoid.tv
Click to expand...
Click to collapse
Can you share what versions do you use? Pls
Amlogic_USB_Burning_Tool's Config should be Erase flash - Erase normal.
If set to Erase flash - Flash all , DRM key will be deleted and amazon video/Netflix will not work,
I did it ... how do I restore the DRM key?
Vitamin_B2 said:
Amlogic_USB_Burning_Tool's Config should be Erase flash - Erase normal.
If set to Erase flash - Flash all , DRM key will be deleted and amazon video/Netflix will not work,
I did it ... how do I restore the DRM key?
Click to expand...
Click to collapse
You can't. They're gone.
send me a pic of pins to short?
crocodile61 said:
hi
thak you very much bro. my mibox s 22-AB unbriked and revive succesful with this methode in the first time
best regard
Click to expand...
Click to collapse
i have the firmware flashed ok to an external USB stick, but where are the pins to short together on the MDZ 22 AB? or, where is this "test point" im supposed to short to a "metal case? i see 3 metal covers on the board, probably with chips beneath them...do i have to remove one of these? can you send me a pic of the pins to short? [email protected]
Hi guys,
appreciate the hard effort. can you please tell me why has this happened just today morning & send me links or how to repair.
[email protected]