Related
Hello,
I need help here. Everytime I flash ANY new rom then when I connect my usb it won't do anything,it doesn't ask if I want to mount,charge or whatever and my pc does not recognize it asking for a driver, but when I am on SE stock rom it works fine and it's pure annoying me.
[The only way it detects my phone is on xrecovery and pressing mount usb storage]
I reinstalled PC companion and nothing.it just says there is an update and asks me to do it and it takes ages..
you should shutdown your phone and press back button and connect your phone to computer...
zjhjack123 said:
you should shutdown your phone and press back button and connect your phone to computer...
Click to expand...
Click to collapse
No, that is not the problem even if I do that it will just boot normally.I tried connecting it to another pc and it recognizes it OK also installs the drivers.
The other pc is W7 32 bit, mine is 64.I think I have a problem with the usb's drivers but I can't figure it out yet how to solve it apart from reinstall the drivers.
Any help will be appreciated!!
Install SE Update Service, and it'll install the drivers for you.
I got it installed, but I had enough by having several BSOD when I reinstalled all the usb drivers,(wtf), almost lost the OS, don't know why, I managed to boot, so i'm going to format my pc and install windows again. Thanks
nanodroid said:
I got it installed, but I had enough by having several BSOD when I reinstalled all the usb drivers,(wtf), almost lost the OS, don't know why, I managed to boot, so i'm going to format my pc and install windows again. Thanks
Click to expand...
Click to collapse
Uninstall SE Updated, reboot PC, install SE Update... No need for formatting.
I had to do it, all my USB drivers were just F**d,no matter what I connect to the pc, it won't recognise it and ask for a driver..I don't know the cause of this, maybe I pushed it too much.everything is working now.
Is it possible for the OP's to close their own thread? I just don't need it opened,it would be good if you could do it to help admins.
Guys this is my 1st post ,
i do have the Stock rom and the Kernel wth me but when i try to connect into FLASHMODE it doesnt install the drivers, it gives errors sometime SEMC or SOMC didnt install and the component has been corrupted, it shows me as S1 Boot Download with a yellow exclamation mark, i tried SEUS PC Companion, Restoring the OS, uninstalling all drivers and reinstalling, updating the bios changing usb ports, chaged the usb cable, but nothing is gettng this S1 BOOT DOWNLOAD driver installed, iam stuck at this point and i cant flash my stock kernel,
Please if you have any other way or solution please help me
Which windows version are you using?
Did you try this with other computer? If not try in a computer where windows 7 installed.... It will automatically install all the drivers for both flashmode as well as for fastboot... If you are on win8 or 8.1 let me know I will get you the solution
Hey guys. I have kenzo on the latest stable rom and USB doesnt seem to be working. When I connect to my pc (WINDOWS 10 32-BIT) the phone charges but nothing else happens. There is no option to change to mtp mode on phone AND nothing shows up on my PC and nothing on device manager
How do I fix this because I want to unlock my bootloader in the future and if the PC cant detect my phone then I'm screwed. Thanks so much in advance
and yes, the mi flash tool, adb drivers, you call it, all is installed
Is your problem solved???
Is yes please tell me what you did.
Hello all.
I have hit a problem with my Hisense c20. I rooted using kingoroot and everything seemed to work fine. SuperUser was installed and working as it should. The phone then ran flat so I plugged it in and booted but it just hung on the SMART powered by android screen. So I restarted again into recovery mode and cleared system cache. Rebooted again but same thing. So tried again but with the wipe user data option. Still just hangs there. I then decided to try flash a stock rom via needrom. I followed the instructions but cannot seem to get the phone to be visible as a com port on Windows 7 64 bit. I have tried different cables and USB ports and reinstalled drivers countless times. Please could anyone assist me on getting this phone to be seen as a com port so I can flash it with QFIL.
Kind regards
Ryan
Ok so i managed to figure this out on my own. Basically what i did was plugged phone into pc while holding volume + and power. Phone showed up as Hisense in device manager, along with ADB device and USB composite device. I then right clicked on Hisense and uninstalled driver. Then i downloaded QCDLoader drivers and manually installed the driver via Have disk option and made sure to select the 9006 port driver package from the qcser.inf driver package. Once that was installed the phone was detected as a COM port. I then went into eMMC software download program in QPST and set the phone to download mode. Then back to device manager and saw QHUSB unidentified device. Right clicked that and went through same procedure as the 9006 driver except selecting the QCDLoader option instead of 9006 package. Phone then allowed me to flash Stock rom and was unbricked after a cache clear and system wipe. Took 3 days to figure it out but it worked. If anyone reading this is struggling with the same problem, let me know and i can go into more depth to try help. Really late and about to head off to bed.
Kind regards
Ruan
Need a file *qcn. or backup NV backup ?
Who has the opportunity to give?
[email protected]
[email protected]
RuanRex said:
Ok so i managed to figure this out on my own. Basically what i did was plugged phone into pc while holding volume + and power. Phone showed up as Hisense in device manager, along with ADB device and USB composite device. I then right clicked on Hisense and uninstalled driver. Then i downloaded QCDLoader drivers and manually installed the driver via Have disk option and made sure to select the 9006 port driver package from the qcser.inf driver package. Once that was installed the phone was detected as a COM port. I then went into eMMC software download program in QPST and set the phone to download mode. Then back to device manager and saw QHUSB unidentified device. Right clicked that and went through same procedure as the 9006 driver except selecting the QCDLoader option instead of 9006 package. Phone then allowed me to flash Stock rom and was unbricked after a cache clear and system wipe. Took 3 days to figure it out but it worked. If anyone reading this is struggling with the same problem, let me know and i can go into more depth to try help. Really late and about to head off to bed.
Kind regards
Ruan
Click to expand...
Click to collapse
Hi Ruan. You haven't found a custom recovery?
Hi and Thank you for help!
The problem is, When I connect phone to PC in "Bootloader" mode(turn off volu...), Nothing happend in my pc.
NOOOOOOOOOOOOTHING
not in device manager, Not even a connecting beep, Nothing at all
Where is the problem?
After I buy this phone, the global ROM make me mad, because of st#%#id google dialer, my phone is nearly USELESS
so I need to change the ROM to Indonesia(ID) version
You have to first install all the drivers.
ADB and Fastboot drivers download and install it.
MI FLASH TOOL download and install it. after installation open the mi flash tool and go to drivers and install the drivers in C drive.
after that your pc should read you device.
if still the problem be there, then I suggest updating the windows or update the windows drivers.
i hope it will help you.
NOAKNAVAS said:
You have to first install all the drivers.
ADB and Fastboot drivers download and install it.
MI FLASH TOOL download and install it. after installation open the mi flash tool and go to drivers and install the drivers in C drive.
after that your pc should read you device.
if still the problem be there, then I suggest updating the windows or update the windows drivers.
i hope it will help you.
Click to expand...
Click to collapse
Thank you for Drivers link and help but
The problem is not that PC can't find right driver
The problem is, when I'm in FASTBOOT mod (volume down and Power key, the yellow one), connecting the phone not detecting at all. like nothing happening, Nothing.
phone connect to PC when it's turned on without problem.
I installed adb, mini adb and everything I found on web. I install links you give me, install drivers from mi flash tool menu and that said -install finished- in Chinese
I'm Gone check Other PCs for Os(windows) problem
Thank you again
Solved:
THE Problem is something with my PC
Use Other PC(laptop) and Unlocked
THANK TO THE GOD, with last unlock tool(ver7) it unlocked instantly!
NOAKNAVAS said:
You have to first install all the drivers.
ADB and Fastboot drivers download and install it.
MI FLASH TOOL download and install it. after installation open the mi flash tool and go to drivers and install the drivers in C drive.
after that your pc should read you device.
if still the problem be there, then I suggest updating the windows or update the windows drivers.
i hope it will help you.
Click to expand...
Click to collapse
report:
ONLY links you post here works! and works fine.
I download higher version of miflash and use CMD, both not working.
Thank you.