NOW OUR GALAXY ACE 4 ( SM-316HU ) OFFICIALLY SUPPORTED BY TeamWin Recovery Project.
THIS THREAD ONLY FOR ANNOUNCEMENT & DOWNLOAD PROCEDURE .
SO LET'S GO :
1. DOWNLOAD TWRP APP FROM GOOGLE PLAY STORE.
2. IN DEVICE SELECT OPTION, SELECT vivalto5mve3g & DOWNLOAD THE RECOVERY.
3. FLASH THE DOWNLOADED FILE WITH FLASH OPTION ( MUST ROOT !!! ).
FOR LATEST UPDATE FOLLOW : https://forum.xda-developers.com/showthread.php?t=3851893
Related
hello mates. Updated root tool with SuperSU 2.65 is here. flash the zip files in stock/custom recovery and your phone is rooted.
Procedure:
1. Go to settings>about phone>system updates.
2. Tap three dots in top right corner and choose update package.
3. Navigate to the Root Redmi 2-signed.zip and tap it.
4. your phone will reboot and SuperSu will be installed.
5. now open SuperSu app and a dialog will pop up about updating su binaries, accept the dialog and choose normal method ( don't choose TWRP/CWM method if you are on stock recovery otherwise you will end up with recovery loop ).
6. wait for few seconds and su binaries will be updated with a dialog.
7. now simply reboot your device and you are rooted successfully.
Happy rooting
Google Drive Link
I think this thread should be on XIAOMI REDMI 2 GUIDES , NEWS , & DISCUSSION section. because there is no development from the OP
As there is already a rooting guide for this device, this thread is closed. The thread can be found linked below.
http://forum.xda-developers.com/red...rooting-to-t3294212/post64828758#post64828758
Hey if have to root and install twrp recovery in Samsung galaxy star pro GT-S7262
With this method you can easily root and enter into the recovery
Follow These Steps:
Download Link: see the reply to this post below.
EXTRACT THE DOWNLOADED ZIP FILE.
YOU GET THESE FILES:
1.Odin3_v3.10.7(Flashing Tool For Windows)
2.GT-S7262_4.1.2.tar
3.twrp-s7262.tar.md5
4.SuperSU.zip
5.quickboot.apk
6.Samsung-Usb-Driver-v1.5.49.0.exe
Steps to root and Install Twrp Recovery on GT-S7262
1.install samsung usb driver and open odin tool and click on AP and browse for downloaded file-GT-S7262_4.1.2.tar and click open.
2.now reboot your device in download mode and connect to pc.
3.odin will show added.
4.now click on start.
5.when it shows green pass then disconnect you phone and reboot.
Now your phone is rooted
6.rebot your phone once again in download mode and connect to pc and flash twrp-s7262.tar.md5 as AP (make sure to untick Auto Reboot in odin).
7.after its completed reboot and install quickboot,apk after install open quickboot app and grant superuser access.
8.now tap on recovery option and it will take you to the twrp recovery .
If you have to get supersu (recomended) then flash SuperSU.zip in twrp recovery .
PLEASE HIT THANKS IF IT HELPED!
DOWNLOAD LINK:http://usercloud.net/3m7
Thanks
Hello guys,
So are you all using that Old CWM or Philz recovery?
You might have searched TWRP for Micromax A102 But didn't get
So here is the Solution.
Notes :-
i)This Recovery is only for Micromax A102. Do not flash it on any other Devices
ii)Your android should be rooted. [root with kingroot from below.
iii)I am not responsible for any brickage of your android
[Recovery is fine, Don't worry]
Download Links :-
TWRP for Micromax A102
How To Flash TWRP Recovery:-
1.Steps to flash TWRP Recovery with Rasher :-
i) Download 'Rasher' app from Play Store.
ii) A dialog box will appear,just accept/grant it.
iii) Download the TWRP 3.0 Recovery from above link. And put it in SDCard.
iv) Open Rasher App.
v) Select 'Recovery from Storage'.
vi) Now select the place where you have downloaded TWRP Recovery and install it.
vii) Done!!
2.Steps to flash TWRP Recovery with Mobileuncle Tools :-
i) Download 'Mobileuncle Tools' app from here[/URL].
ii) A dialog box will appear,just accept/grant it.
iii) Download the TWRP 3.0 Recovery from above link. And put it in SDCard.
iv) Open Mobileuncle Tools App.
v) Select 'Recovery Update'.
vi) Now select the TWRP recovery you have downloaded and install it.
vii) Done!!
3.Steps to flash TWRP Recovery with Flashify:-
i) Download 'Flashify' app from Play Store.
ii) A dialog box will appear,just accept/grant it.
iii) Download the TWRP 3.0 Recovery from above link. And put it in SDCard.
iv) Open Flashify App.
v) Select 'Recovery image'.
vi) Now select the place where you have downloaded TWRP Recovery and install it.
vii) Done!!
How To Enter in Recovery:-
i)Switch off your Android Phone
ii)Press and hold Volume Up and Power Button Together
iii)Done!!
Hit Thanks if you like it.:good:
download links
Editer's Pride said:
Hello guys,
So are you all using that Old CWM or Philz recovery?
You might have searched TWRP for Micromax A102 But didn't get
So here is the Solution.
Notes :-
i)This Recovery is only for Micromax A102. Do not flash it on any other Devices
ii)Your android should be rooted. [root with kingroot from below.
iii)I am not responsible for any brickage of your android
[Recovery is fine, Don't worry]
Download Links :-
TWRP for Micromax A102
How To Flash TWRP Recovery:-
1.Steps to flash TWRP Recovery with Rasher :-
i) Download 'Rasher' app from Play Store.
ii) A dialog box will appear,just accept/grant it.
iii) Download the TWRP 3.0 Recovery from above link. And put it in SDCard.
iv) Open Rasher App.
v) Select 'Recovery from Storage'.
vi) Now select the place where you have downloaded TWRP Recovery and install it.
vii) Done!!
2.Steps to flash TWRP Recovery with Mobileuncle Tools :-
i) Download 'Mobileuncle Tools' app from here[/URL].
ii) A dialog box will appear,just accept/grant it.
iii) Download the TWRP 3.0 Recovery from above link. And put it in SDCard.
iv) Open Mobileuncle Tools App.
v) Select 'Recovery Update'.
vi) Now select the TWRP recovery you have downloaded and install it.
vii) Done!!
3.Steps to flash TWRP Recovery with Flashify:-
i) Download 'Flashify' app from Play Store.
ii) A dialog box will appear,just accept/grant it.
iii) Download the TWRP 3.0 Recovery from above link. And put it in SDCard.
iv) Open Flashify App.
v) Select 'Recovery image'.
vi) Now select the place where you have downloaded TWRP Recovery and install it.
vii) Done!!
How To Enter in Recovery:-
i)Switch off your Android Phone
ii)Press and hold Volume Up and Power Button Together
iii)Done!!
Hit Thanks if you like it.:good:
Click to expand...
Click to collapse
Hi
I would like to inform you that i can't find any download links
So please send me download links through mail
My email id is
[email protected]
send me TWRP 3.0 links for micromax A102 (doodle 3)
Please send me link twrp for micromax canvas A102 doodle 3 android 4.4.2
I should have posted this in development area < Galaxy A3, A5, A7, A8 Android Development > , some admin / modder please move the thread , thanks and sorry for the mistake, i was in a hurry , jogging time !
I've recently managed to root my phone via twrp , i've tried a lot of already built twrp recovery image built for marshmallow after updating, this one above
( TWRP_2.8.7.0_A3_F-H-FU_5.0.2_v2.tar > file attached at the thread bottom ) .. yes i know is for lolipop but works on marshmallow , i didn't managed to find who built it but it works and loads even with the "Set warranty bit : recovery" issue , the thing is that get stitch as welll and you are not needed to flash original recovery after rooting .
As the thread title says this is for A3 a300fu (A3 2015) updated to Marshmallow 6.0.1 ( A300FUXXU1CPH3_A300FUOXX1CPI1_ROM ) .
1) Download supersu zip file and place it within your phone memory or sd card
1 ) a) Flash above twrp recovery image with odin .
2) Enter recovery ( power key > home > volume up after flashing the recovery image )
RECOMMENDED > DO A BACKUP FROM TWRP BEFORE FLASHING ROOT AND XPOSED JUST TO STAY SAFE .
3) From twrp choose > install > select your zip file > swap to flash
( I've flashed latest file : SR4-SuperSU-v2.78-SR4-20161115184928.zip )
4) Go to > restart > system TWRP WILL ASK YOU TO INSTALL ROOT CHOOSE > >>> DO NOT INSTALL <<< <
5) LET IT BOOT > YOU WILL ALSO SEE ANOTHER "Set warranty bit" MESSAGE , just wait for boot do not force reboot or something else
(SAME FOR XPOSED FRAMEWORK IT WILL TAKE SOME MINUTES TO BOOT) .
5) a) Download supersu chainfire from google play store and make an update if required
>>>>>> MODS <<<<<<<
Since i've also wanted to install xposed framework as well , i've tested and successfully managed to install this mod :
> xposed-v86.0-sdk23-arm-custom-build-by-wanam-20160709.zip
For xposed framework before flashing zip file with the already installed twrp , first install right after rooting
> XposedInstaller_3.0_alpha4.apk from this thread , then reboot to twrp and go to install and select the above named zip .
Happy rooting !
works! many thanks
Unable to flash TWRP
My phone model is SM-A300FU. I tried flashing TWRP with Odin v3.12.3, but it doesn't do anything. On AP I selected the attached .tar file and I put my A3 into download mode. It took 4 seconds to do it and Odin said that it passed, but it didn't do anything. I tried doing it 3 times and it didn't work. My phone didn't get bricked, but it didn't do anything to the recovery. I still have the stock recovery that comes with the phone. Please help. Thank you.
theodoros_1234 said:
My phone model is SM-A300FU. I tried flashing TWRP with Odin v3.12.3, but it doesn't do anything. On AP I selected the attached .tar file and I put my A3 into download mode. It took 4 seconds to do it and Odin said that it passed, but it didn't do anything. I tried doing it 3 times and it didn't work. My phone didn't get bricked, but it didn't do anything to the recovery. I still have the stock recovery that comes with the phone. Please help. Thank you.
Click to expand...
Click to collapse
Try with Odin v10.7 or v11 .. Last version of odin doesn't work great with A 2015
Sent from my SM-A300FU using XDA Labs
kiva1 said:
Try with Odin v10.7 or v11 .. Last version of odin doesn't work great with A 2015
Click to expand...
Click to collapse
Thank you for helping, but it turns out that wasn't the problem. I figured it out, and now I have TWRP installed and I rooted my device.
managed to do mine
Hey theodoros_1234 how did you figured it
out
J6OOG updated to the last version (android 10)
stucks in boot after flashing TWRP and MAGISK
Is there a way to root it. . . .
NB: Iwas on PIE(9) ..and rooted by magisk. .
THANK's. . .
after a week of googling I finally found a tutorial on how to root another galaxy on android 10.
I tried this method on my J6 and it works.
today i will share it with you ....
but know that .....
- I am not a developer ...
- this method worked for me .. it might not for you ..
- I could not be responsible for probable damage ...
- you can always wait for an official method ...
- if you want to try it then ...... I guess you know what :
a root..bootloader..USB debugging…OEM unlock…drivers…odin..magisk..7zip ... data loss ... warranty .. and ....
I tried this method on my J600G/DS…i don’t know if it works on other variants…
1) download your latest firmware…mine is XME-J600GDXU6CTCA
2) extract it in a folder on your PC
3) check that you have enough space on your phone (+ 7GO free)
3) copy the AP file from the folder to your phone…internal or SDCard (use a USB flash disk)… cable transfer can corrupt data…
4 )Install Latest Magisk Manager and open it
5) « magisk is not installed »…tap on.. « install »..and « install » in next window…and allow…
6) navigate to your AP file and select it and wait until the process completes..
7) go to Download folder and copy “magisk_patched.tar” to your PC ..folder where firmware was extracted…
8) connect phone to PC and enter Download mode..
9) with Odin flash the 4 files..BL..CP..CSC..and in AP select “ magisk_patched.tar” file..
10) when done and system boot finished..configure your device…
11) install magisk manager again..and open it…it will say “Requires additional setup”
12) tap “OK”..wait..the device will reboot..
YOU ARE ROOTED
**download and install Busybox from Magisk..
**TitaniumBackup will crash…download “Tbcrash fixer” from “ mobilism forum ”
**download and install “debloater” module from Magisk…install “Terminal Emulator” to debloat your device…
( SU..enter…..debloat..enter )
**don’t try to install a custom recovery..device will stuck at boot..
GOOD LUCK
Did you patch the file with the same device which you used it or two different devices?
Well, i got it and it works.
Uses the magisk_patched.tar from the same device which i wanted to root.
And with a clean odin installation that should work.
bombername said:
Did you patch the file with the same device which you used it or two different devices?
Well, i got it and it works.
Uses the magisk_patched.tar from the same device which i wanted to root.
And with a clean odin installation that should work.
Click to expand...
Click to collapse
AP file patched with the same device....
four files flashed with Odin....
For information are you rooted now ?....
Yes, I have root now.
bombername said:
Yes, I have root now.
Click to expand...
Click to collapse
Glad to know that . . .
it worked bro very thanks.
I rooted my device too but only boot.tar used....
Not all AP files...
But I had a problem ... is that I cannot delete system files using link2sd or any other application .... I don't know what the problem is .... if the problem doesn't with you ... please let us know ?
THANKS
Thanks bro, you really help me!
santebien said:
after a week of googling I finally found a tutorial on how to root another galaxy on android 10.
I tried this method on my J6 and it works.
today i will share it with you ....
but know that .....
- I am not a developer ...
- this method worked for me .. it might not for you ..
- I could not be responsible for probable damage ...
- you can always wait for an official method ...
- if you want to try it then ...... I guess you know what :
a root..bootloader..USB debugging…OEM unlock…drivers…odin..magisk..7zip ... data loss ... warranty .. and ....
I tried this method on my J600G/DS…i don’t know if it works on other variants…
1) download your latest firmware…mine is XME-J600GDXU6CTCA
2) extract it in a folder on your PC
3) check that you have enough space on your phone (+ 7GO free)
3) copy the AP file from the folder to your phone…internal or SDCard (use a USB flash disk)… cable transfer can corrupt data…
4 )Install Latest Magisk Manager and open it
5) « magisk is not installed »…tap on.. « install »..and « install » in next window…and allow…
6) navigate to your AP file and select it and wait until the process completes..
7) go to Download folder and copy “magisk_patched.tar” to your PC ..folder where firmware was extracted…
8) connect phone to PC and enter Download mode..
9) with Odin flash the 4 files..BL..CP..CSC..and in AP select “ magisk_patched.tar” file..
10) when done and system boot finished..configure your device…
11) install magisk manager again..and open it…it will say “Requires additional setup”
12) tap “OK”..wait..the device will reboot..
YOU ARE ROOTED
**download and install Busybox from Magisk..
**TitaniumBackup will crash…download “Tbcrash fixer” from “ mobilism forum ”
**download and install “debloater” module from Magisk…install “Terminal Emulator” to debloat your device…
( SU..enter…..debloat..enter )
**don’t try to install a custom recovery..device will stuck at boot..
GOOD LUCK
Click to expand...
Click to collapse
Does this mean that I will never be able to use twrp recovery...is there no other way to use twrp recovery
santebien said:
after a week of googling I finally found a tutorial on how to root another galaxy on android 10.
I tried this method on my J6 and it works.
today i will share it with you ....
but know that .....
- I am not a developer ...
- this method worked for me .. it might not for you ..
- I could not be responsible for probable damage ...
- you can always wait for an official method ...
- if you want to try it then ...... I guess you know what :
a root..bootloader..USB debugging…OEM unlock…drivers…odin..magisk..7zip ... data loss ... warranty .. and ....
I tried this method on my J600G/DS…i don’t know if it works on other variants…
1) download your latest firmware…mine is XME-J600GDXU6CTCA
2) extract it in a folder on your PC
3) check that you have enough space on your phone (+ 7GO free)
3) copy the AP file from the folder to your phone…internal or SDCard (use a USB flash disk)… cable transfer can corrupt data…
4 )Install Latest Magisk Manager and open it
5) « magisk is not installed »…tap on.. « install »..and « install » in next window…and allow…
6) navigate to your AP file and select it and wait until the process completes..
7) go to Download folder and copy “magisk_patched.tar” to your PC ..folder where firmware was extracted…
8) connect phone to PC and enter Download mode..
9) with Odin flash the 4 files..BL..CP..CSC..and in AP select “ magisk_patched.tar” file..
10) when done and system boot finished..configure your device…
11) install magisk manager again..and open it…it will say “Requires additional setup”
12) tap “OK”..wait..the device will reboot..
YOU ARE ROOTED
**download and install Busybox from Magisk..
**TitaniumBackup will crash…download “Tbcrash fixer” from “ mobilism forum ”
**download and install “debloater” module from Magisk…install “Terminal Emulator” to debloat your device…
( SU..enter…..debloat..enter )
**don’t try to install a custom recovery..device will stuck at boot..
GOOD LUCK
Click to expand...
Click to collapse
THANKS MAN FINALLY same here 1 month searching finally doing this method works and i guess shold work for every device, just look for your exact rom firmware. and do the same procedure thought Odin paste the AP COPIED FROM MAGISTIK AND YOU ARE ROOTED its workin on Model SAMSUNG j600G PERFECTLY , ANY HELP IM HERE TO HELP
josephpatrick said:
Does this mean that I will never be able to use twrp recovery...is there no other way to use twrp recovery
Click to expand...
Click to collapse
YES THERE IS A WAY . I HAVE TWRP , MAGISK AND A CUSTOME ROM ANDROID 9 I FOUND HERE WITH AWESOME KERNEL AND OFFICIAL PIE 9 , IM HERE TO HELP