Related
i just called the synpatics technical support department in the U.S (0018774054163) and asked them weather the T1021A is a Clearpad 1000 or a Clearpad 2000 ?.......
and the answer was "according to documentation" IT IS a clearpad 2000 that is capable of registering 2 simultaneous touch points at the same time...
that was exactly what the support guy told me so i guess now it is confirmed that the T1021A is a clearpad 2000 unless synpatics guys know nothing about the stuff they produce
i can call them back anytime and get any further needed information, i guess it's getting more exciting for us now.....
thanks
Edit : Even if the clearpad 2000 got "buggy" dual touch it's still sufficient for playing games with it
- as shown in the first "test" video some times the touches register in the wrong position (inversed location) specially when the axis of the 2 touches is crossed, but still IT IS enough for handling multi touch games like in the Nokia n8 , HTC legend and ztc blade not to mention the Google nexus one....
Edit 2 : an example of what a clearpad 2000 can do is shown in these videos (using a ZTE Blade which is a clearpad 2000 of course).....
Video #1 multitouch test (Skip the first minute)
Video #2 Assassin's Creed (can run in any direction and jump @ the same time)
Video #3 Fifa 10 (Can run in any direction and shoot or pass @ the same time)
Edit 3 : It is believed that sony not only crippled the touch screen driver BUT also the touch screen controller chip firmware !! that's why we can still not get a functional DT and i believe this is right so at least now we know what we exactly got here and maybe a solution can be found over time...
Edit 4 : Ok called them again BUT couldn't get any firmware from them heck they didn't even know what a firmware is.....
But on the brighter side i got another CONFIRMATION from the marketing department this time that the T1021A is sold as a "clearpad 2000" Dual Touch Solution.....
Copied from the x8 forums just to make this information available here maybe the x10 mini devs and users have something to contribute to this cause.....
for original post please go >>> http://forum.xda-developers.com/forumdisplay.php?f=847
Thanks.....
That was all I needed to read, thanks.
Theshawty said:
That was all I needed to read, thanks.
Click to expand...
Click to collapse
It is believed that sony not only crippled the touch screen driver BUT also the touch screen controller chip firmware !! that's why we can still not get a functional DT and i believe this is right so at least now we know what we exactly got here and maybe a solution can be found over time i hope.....
skyboyextreme said:
It is believed that sony not only crippled the touch screen driver BUT also the touch screen controller chip firmware !! that's why we can still not get a functional DT and i believe this is right so at least now we know what we exactly got here and maybe a solution can be found over time i hope.....
Click to expand...
Click to collapse
With modded drivers, even we can have dualtouch. It just seems it will be hard as hell to do it and the devs don't know how.
Sony Ericsson is too idiotic over its products!
i wonder why they are 'under' their competitors
Yes,yes,yes!!
Im gettiong sick of THIs sh-t a-s Fake dual touch! I WANT THE REAL DUAL TOUCH ON MAH CLEAR PAD 2000!
Hello,
I got my 101 Turbo on friday and flashed the newest 4.06 firmware. But somehow I'm wondering about the touchscreen sensitivity. It seems my screen is not very sensitive, especially swiping is really hard.
This video demonstrates the problems I'm having swiping:
http://www.youtube.com/watch?v=OmVJPOYGAzU&feature=youtu.be
So I enabled the debug feature for showing the raw touchscreen data. I realised everytime I swipe, there is a chance that the touchscreen registers a "going back motion", like drawing a hook while swiping. This can be seen in this video:
http://www.youtube.com/watch?v=4vMSy6EJxRk&feature=youtu.be
This hook like motion that the screen detects would explain why I have trouble swiping from one screen to another.
I also tried the "SGS Touchscreen Booster", which was recommended in some other threads, but it does not have any effect at all (propably due to kernel changes in ics).
So my question is: Is this normal for the Archos G9 101, or is my tablet faulty?
PS
I recalibrated the touchscreen like a hundred times. Pretty sure this is not a software problem.
http://forum.xda-developers.com/showthread.php?t=1557635
It is software
Sent from my ice cream powered Nexus S
DarkhShadow said:
http://forum.xda-developers.com/showthread.php?t=1557635
It is software
Sent from my ice cream powered Nexus S
Click to expand...
Click to collapse
This seems to be a different issue. My screen is accurate, but not sensitive.
skyworxx said:
This seems to be a different issue. My screen is accurate, but not sensitive.
Click to expand...
Click to collapse
Being accurate and sensitive are mostly the same thing, also I do have sensitivity issues, I don't know why Archos haven't fixed these issues yet.
Sent from my ice cream powered Nexus S
It seems your right.
I have downgraded to Honeycomb and the issue is almost gone. This video compares HC against ICS:
http://www.youtube.com/watch?v=LPjTyzsFYvU&feature=youtu.be
After upgrading to ICS, the problem appeared again. In another forum, someone with the same tablet has no problems on ICS. This seems pretty strange to me.
skyworxx said:
It seems your right.
I have downgraded to Honeycomb and the issue is almost gone. This video compares HC against ICS:
http://www.youtube.com/watch?v=LPjTyzsFYvU&feature=youtu.be
After upgrading to ICS, the problem appeared again. In another forum, someone with the same tablet has no problems on ICS. This seems pretty strange to me.
Click to expand...
Click to collapse
Maybe the screen drivers aren't 100% yet, that or because every device is different so some don't like ICS kernel?
If it does turn out to be a hardware issue and Archos offer free fixes I hope to get a free upgrade to a 101G9 1GB Ram, 1.5Ghz version
EDIT: Do you have have a 1.5Ghz by any chance? Just wondering as my Turbo doesn't have Turbo on it xD
Sent from my ice cream powered Nexus S
I already contacted the shop where I bought it and asked for a replacement. I will report if the new device shows the same behaviour with ICS.
skyworxx said:
I already contacted the shop where I bought it and asked for a replacement. I will report if the new device shows the same behaviour with ICS.
Click to expand...
Click to collapse
If it doesn't I will probably do the same....
Sent from my ice cream powered Nexus S
Hello,
I have the Same issuse in new g9 omap4460 101 ..
Is there a fix for that?
Thx
Airon
i have a chinese tablet (Teclast P98HD A2Q6) with some very good specs
it has 4.1.1 but it's laggy
there's another tablet called (PIPO M6) with the same processor and display & it has 4.2.2 with the latest SDK for the chip
can i upgrade my tablet with PIPO's firmware ?
No, the bootloader, radio and baseband are not the same at all and the CPU is different so it is not safe to do so.
Sent from my Nexus 4 using xda app-developers app
thanx
i thought as they both have the rk3188, same display and basically same specs; i could use the same firmware on both
hmm
nagoo1 said:
thanx
i thought as they both have the rk3188, same display and basically same specs; i could use the same firmware on both
Click to expand...
Click to collapse
It is a tablet so the radio etc drivers don't apply.
Well, I do have the same tablet, great specs. waiting for my charger to arrive (the seller forgot to post the charger). As soon as I receive it and have enough battery juice, I will flash it with the pipo M6. so check back in 2 weeks and I'll let you know.
thanx utopia I'll be waiting
can u use your tablet or the battery is dead?
I wanna know if u have problems with the mic
I have to speak directly into the MIC's hole to record or to use Skype
I tried a pair of headphones with in line mic but the mic didn't work, I don't know if the socket supports external mics & it's f'#$%in annoying
nagoo1 said:
thanx utopia I'll be waiting
can u use your tablet or the battery is dead?
I wanna know if u have problems with the mic
I have to speak directly into the MIC's hole to record or to use Skype
I tried a pair of headphones with in line mic but the mic didn't work, I don't know if the socket supports external mics & it's f'#$%in annoying
Click to expand...
Click to collapse
I can't use the tablet. It has ran out of charge and I don't have a charger at the moment.
Oh, I thought I was the only one with the mic issue. even if you talk directly into the mic, it barely records anything. I'm hoping this is a software/driver issue and not a hardware issue. I do not think it supports an external mic
I'll let you know as soon as I receive my charger.
utopia2244 said:
I can't use the tablet. It has ran out of charge and I don't have a charger at the moment.
Oh, I thought I was the only one with the mic issue. even if you talk directly into the mic, it barely records anything. I'm hoping this is a software/driver issue and not a hardware issue. I do not think it supports an external mic
I'll let you know as soon as I receive my charger.
Click to expand...
Click to collapse
What is the voltage on your charger? is it 5V, 2A ? I ordered a 5V, 2-3A adapter but doesn't seem to charge it. I wonder if it is 9V or 12V, damn it, more waiting again
I can confirm that it doesn't work , doesn't turn on. Had to flash back to Teclast 4.1.1 again. I guess we just have to wait for them to release 4.2. Good luck
thanx utopia ... we'll have to wait then
plz if u know ay thing new post it here, i'd really appretiate it
http://bbs.teclast.com/forum.php?mod=viewthread&tid=239229&extra=&page=1
here's 4.2.2 .. i think it's still a beta though (( google translate can't understand chinese too ))
utopia2244 said:
I can confirm that it doesn't work , doesn't turn on. Had to flash back to Teclast 4.1.1 again. I guess we just have to wait for them to release 4.2. Good luck
Click to expand...
Click to collapse
Have you tested mic with 4.2.2?
Thank´s
alijo said:
Have you tested mic with 4.2.2?
Thank´s
Click to expand...
Click to collapse
I have 4.2.2 installed and rooted. Installed different sound recorders and tried them all. The issue is definitely a hardware issue. Overall I'm not happy with the tablet at all. The issues that I have had so far:
1- Mic
2- Sometimes I need to press the power button a few times for the screen to wake up, sometimes it takes up to 20 seconds to do that.
3- It reboots automatically, rarely but it happens.
4- The performance of RK3188 is horrible. CPU is fine but GPU is very much under powered for such a high resolution screen.
I am on the latest firmware by teclast - 2.08. Still waiting to see if any other update is released that solves the screen problem at least but I have a feeling it will never be updated again. In the meantime, I have purchased a Ramos i9 which has an intel processor. The tablet is one of the best as I hear. I will be receiving it in 3 days It has the GPU of Galaxy S4 (PowerVR SGX 544) which should handle fullhd screen easily
Hello, how can i tell if teclast is A2Q6 or K9W8?
There is this ROM tha is for p98hd k9w8
http://www.slatedroid.com/topic/58098-rom-top-notch-tablets-teclast-p98hd-k9w8-release-1-firmware/
And how did you install the 4.2 rom?
Thank you?
Teclast is a2q6. you can download the official firmware from the following website.
http://www.teclast.com/tools/pad/pad.php
click on the right arrow > and enter a2q6 , it will take you to the download site. you can later root it easily with vroot http://www.mgyun.com/vroot
for installing the firmware, you need to use "rockchip batch tool". installation tutorials are available online on many forums
hope that helps
don't use the website you mentioned. you'll get a black screen and you'll brick it.
alijo said:
Hello, how can i tell if teclast is A2Q6 or K9W8?
There is this ROM tha is for p98hd k9w8
http://www.slatedroid.com/topic/58098-rom-top-notch-tablets-teclast-p98hd-k9w8-release-1-firmware/
And how did you install the 4.2 rom?
Thank you?
Click to expand...
Click to collapse
Teclast A2Q6 - USB driver
I have Teclast P98HD pad (A2Q6).
I have downloaded the Android 4.4 version from Teclast website. And also rockchip firmware update utility.
There was USB driver utility along with the firmware.
I did update the USB driver.
Then power off the pad. I did press the Volume down button with start button and restarted.
It went to the firmware upgrade mode with only android logo visible on screen.
But the rockchip firmware utiliy did not detect the pad at this stage.
Could anyone suggest what could be the reason? Is it the problem with USD driver?
How to resolve this.
Also can anyone tell where exactly can I get USB driver for RK3188 .
Hi All,
Have Purchased a Teclast T20 android tablet and while setting it up I thought of running a screen test.
Noticed those lines appearing randomly, after I saw that, I also noticed them showing in one or two apps (KOReader, some news app etc).
Video here: https://streamable.com/ukmn3
Is this caused by the GPU? does it mean device is defective (hardware) or is this something that can be fixed by software?
Thanks!
Does anyone know if this can be fixed?
tibrocks said:
Does anyone know if this can be fixed?
Click to expand...
Click to collapse
I had screen tearing, when scrolling pages. Also games ran very slow and stuttered. I then noticed that my T20 hardware revision was the T2E2, yet the preloaded Android build was for the T2E1. After a very long and tedious process of trying to sign up to the Chinese Baidu cloud storage, I was eventually able to download the official stock ROM for the T2E2 revision (also a VERY slow download < 100 KB/sec).
After reflashing my Teclast T20 with new T2E2 ROM, my screen tearing is now FIXED! Tablet also runs overall a lot smoother. And games run at normal speed.
I uploaded the ROM, repackaged with 7-Zip to save space - also renamed the Chinese folders in English, to my OneDrive for safe storage, since it is such an ordeal downloading from the official source. You are welcome to grab a copy, if you also have the T2E2 and need this ROM. Cheers.
T20 (T2E2)-Android7.1.1_V1.02.7z
https://1drv.ms/u/s!Ak1oNu4Puqijg6ZbbpbN-TGJ0Pxkmw
parasupaman said:
I had screen tearing, when scrolling pages. Also games ran very slow and stuttered. I then noticed that my T20 hardware revision was the T2E2, yet the preloaded Android build was for the T2E1. After a very long and tedious process of trying to sign up to the Chinese Baidu cloud storage, I was eventually able to download the official stock ROM for the T2E2 revision (also a VERY slow download < 100 KB/sec).
After reflashing my Teclast T20 with new T2E2 ROM, my screen tearing is now FIXED! Tablet also runs overall a lot smoother. And games run at normal speed.
I uploaded the ROM, repackaged with 7-Zip to save space - also renamed the Chinese folders in English, to my OneDrive for safe storage, since it is such an ordeal downloading from the official source. You are welcome to grab a copy, if you also have the T2E2 and need this ROM. Cheers.
T20 (T2E2)-Android7.1.1_V1.02.7z
https://1drv.ms/u/s!Ak1oNu4Puqijg6ZbbpbN-TGJ0Pxkmw
Click to expand...
Click to collapse
Cheers mate, this is helpful!
I get screen tearing when scrolling pages as well - the only thing is, I don't know how to check the hardware version?
Settings > About screenshot attached
PS. did you have any issues charging? mine seems to charge slowly, I am waiting for an USB voltage/amp meter to find out what's going on
tibrocks said:
Cheers mate, this is helpful!
I get screen tearing when scrolling pages as well - the only thing is, I don't know how to check the hardware version?
Settings > About screenshot attached
PS. did you have any issues charging? mine seems to charge slowly, I am waiting for an USB voltage/amp meter to find out what's going on
Click to expand...
Click to collapse
Sorry for the late reply. Been busy moving interstate.
You will notice in the attached screenshot, that my Android version now shows T20(T2E2) under Model, which now matches my hardware revision. Even though your screenshot does not show T2E1 anywhere on your Status page, the fact that you are running Build number 1.16, means it is the Android software build for the T2E1. I'm guessing that they simply did not bother displaying the hardware revision T2E1 for the first revision.
You can double check your hardware revision, by looking on the rear of your T20 Tablet. If you have a T2E2 hardware revision, then you probably have the same issue I had, with the mismatched software/hardware.
Otherwise, if you have the T2E1 hardware revision, I know that there is a later version of Android available for the T2E1, version/build 1.23, which you can try.
Also, sorry, not sure about charging. I have only left mine to charge overnight, so don't know how long mine takes to charge.
parasupaman said:
You can double check your hardware revision, by looking on the rear of your T20 Tablet. If you have a T2E2 hardware revision, then you probably have the same issue I had, with the mismatched software/hardware.
Click to expand...
Click to collapse
Thank you sir!
Indeed, on the back of the tablet says T2E2 so wrong firmware as you mentioned.
Thanks for putting the files together - had an exceptional situation with this tablet!
TL;DR: I have no idea how I updated the firmware?!
So I installed Mediatek Driver provided and was following the Upgrade Tutorial pdf, loaded the Download Agent and Scatter-loading agent into the flash tool on my PC.
Tablet was connected via USB, android debugging switched on.
Got stuck at step 8 when trying to install the driver for MT65xx Preloader: This wouldn't show with the tablet ON, regardless of Debug setting.
Translated the guide and says Tablet OFF>connect USB - still not showing so I press Volume + on tablet..
On the computer I didn't get anything but tablet went into Boot Mode - I selected Normal: took some 3 minutes to boot and Voila! Fresh Android in Chinese, all my data gone.. ?!
On the tablet there were a few new Chinese apps that didn't look familiar - went to Settings trying to change language to English and also checked Android Info out of curiosity..
It now says T2E2!
I didn't 'flash' this via the PC.. so how did that happen? Is it possible the the T2E2 firmware was actually preloaded on the tablet?
Doing some checks now..
Thanks!
tibrocks said:
Thank you sir!
Indeed, on the back of the tablet says T2E2 so wrong firmware as you mentioned.
Thanks for putting the files together - had an exceptional situation with this tablet!
TL;DR: I have no idea how I updated the firmware?!
So I installed Mediatek Driver provided and was following the Upgrade Tutorial pdf, loaded the Download Agent and Scatter-loading agent into the flash tool on my PC.
Tablet was connected via USB, android debugging switched on.
Got stuck at step 8 when trying to install the driver for MT65xx Preloader: This wouldn't show with the tablet ON, regardless of Debug setting.
Translated the guide and says Tablet OFF>connect USB - still not showing so I press Volume + on tablet..
On the computer I didn't get anything but tablet went into Boot Mode - I selected Normal: took some 3 minutes to boot and Voila! Fresh Android in Chinese, all my data gone.. ?!
On the tablet there were a few new Chinese apps that didn't look familiar - went to Settings trying to change language to English and also checked Android Info out of curiosity..
It now says T2E2!
I didn't 'flash' this via the PC.. so how did that happen? Is it possible the the T2E2 firmware was actually preloaded on the tablet?
Doing some checks now..
Thanks!
Click to expand...
Click to collapse
It looks like you managed to successfully flash the new firmware. The new firmware is Chinese (but supports English no problem).
I discovered that the weird way our Tablets are flashed, is that once you hit the 'flash' button in the SP Flash Tool, you then connect your tablet via USB cable in the OFF state (not turned on)], which starts the flash.
I have found that the new firmware fixes the screen tearing and definitely improves smoothness. However, I notice that the scrolling frame rate still drops (stutters) while touching the screen and performing scrolls and swipes. Frame rate seems to improve (smoothen) once the finger is lifted off the screen. I am hoping a future firmware update (hopefully soon) will fix this issue.
parasupaman said:
I discovered that the weird way our Tablets are flashed, is that once you hit the 'flash' button in the SP Flash Tool, you then connect your tablet via USB cable in the OFF state (not turned on)], which starts the flash.
I have found that the new firmware fixes the screen tearing and definitely improves smoothness. However, I notice that the scrolling frame rate still drops (stutters) while touching the screen and performing scrolls and swipes. Frame rate seems to improve (smoothen) once the finger is lifted off the screen. I am hoping a future firmware update (hopefully soon) will fix this issue.
Click to expand...
Click to collapse
Yes flashing was weird, I didn't expect that?!
Seems like the update fixed the screen artifacts which is great!
Thanks
tibrocks said:
PS. did you have any issues charging? mine seems to charge slowly, I am waiting for an USB voltage/amp meter to find out what's going on
Click to expand...
Click to collapse
Good to hear your T20 is now working better :good:
Also, I noticed that charging while the T20 is ON is VERY slow. However, charging while OFF is quite fast. I use the included USB cable, plugged into an AUKEY Quick Charge 3.0/2.0 charger. Not sure if it is compatible with MTK Pump Express, but my tablet seems to still charge pretty fast when OFF and connected to this charger.
T2E2 with build V1.02_20181206
parasupaman said:
Sorry for the late reply. Been busy moving interstate.
You will notice in the attached screenshot, that my Android version now shows T20(T2E2) under Model, which now matches my hardware revision. Even though your screenshot does not show T2E1 anywhere on your Status page, the fact that you are running Build number 1.16, means it is the Android software build for the T2E1. I'm guessing that they simply did not bother displaying the hardware revision T2E1 for the first revision.
You can double check your hardware revision, by looking on the rear of your T20 Tablet. If you have a T2E2 hardware revision, then you probably have the same issue I had, with the mismatched software/hardware.
Otherwise, if you have the T2E1 hardware revision, I know that there is a later version of Android available for the T2E1, version/build 1.23, which you can try.
Click to expand...
Click to collapse
Hi, I just got my new T20 from aliexpress, and it shows "T2E2" on the back, but shows "T20" in status page, without the additional info....the build # says "V1.02_20181206", which seems like your same build , only a few weeks newer (dec 6th instead of nov).
I don't see any screen tearing, but I do notice low frame rates when playing average games like Marvel Contest Of Champions. During fights, it stutters, giving me worse performance than the 2014 Oneplus one that i used for this game previously.
I tried forcing GPU rendering under developer options, but it doesn't help. Is there anything I can do to increase the game performance? That's the whole reason I bought this tablet.
Would it help to try a custom ROM that's Android 8? Or is this a GPU problem that can't be fixed, unless they revise the firmware, which is very unlikely?
Any advice would be great, thx.
Epiclectic said:
Hi, I just got my new T20 from aliexpress, and it shows "T2E2" on the back, but shows "T20" in status page, without the additional info....the build # says "V1.02_20181206", which seems like your same build , only a few weeks newer (dec 6th instead of nov).
I don't see any screen tearing, but I do notice low frame rates when playing average games like Marvel Contest Of Champions. During fights, it stutters, giving me worse performance than the 2014 Oneplus one that i used for this game previously.
I tried forcing GPU rendering under developer options, but it doesn't help. Is there anything I can do to increase the game performance? That's the whole reason I bought this tablet.
Would it help to try a custom ROM that's Android 8? Or is this a GPU problem that can't be fixed, unless they revise the firmware, which is very unlikely?
Any advice would be great, thx.
Click to expand...
Click to collapse
Hi. Looks like the correct firmware build :good: albeit with a slight date update.
I am definitely a little disappointed with game performance. I know that the T880 not a super powerful GPU. But I believe that the T20 is still underperforming due to the Android OS not being optimized for the Helio X27 CPU and T880 GPU. Raw benchmarks of the Helio X27/T880 GPU suggest we should be getting much higher frame rates in games than we are seeing on the T20. Really hoping they provide a firmware update (hopefully Oreo) to take advantage of the Helio X27 better. I notice that the T10 received several updates over a few months, after initial release. So I'm hoping that the T20 gets similar treatment and we see at least a couple of firmware updates at some point.
But yeah, I have been sticking to my Nintendo Switch for gaming, since the T20 has been pretty subpar for gaming. Even my Xiaomi Mi Max Pro (original) with a Snapdragon 652 processor, blows my T20 with Helio X27 out of the water. T20 has been ok for most things other things though. Although, the fact that videos play back with an ever so slight stutter, suggest that the software/drivers are definitely not in sync with the GPU. The hardware video decoding on the Helio X27 should make all video playback buttery smooth.
parasupaman said:
I had screen tearing, when scrolling pages. Also games ran very slow and stuttered. I then noticed that my T20 hardware revision was the T2E2, yet the preloaded Android build was for the T2E1. After a very long and tedious process of trying to sign up to the Chinese Baidu cloud storage, I was eventually able to download the official stock ROM for the T2E2 revision (also a VERY slow download < 100 KB/sec).
After reflashing my Teclast T20 with new T2E2 ROM, my screen tearing is now FIXED! Tablet also runs overall a lot smoother. And games run at normal speed.
I uploaded the ROM, repackaged with 7-Zip to save space - also renamed the Chinese folders in English, to my OneDrive for safe storage, since it is such an ordeal downloading from the official source. You are welcome to grab a copy, if you also have the T2E2 and need this ROM. Cheers.
hola me podrias decir los pasos que has seguido para flashear la room?
gracias
Click to expand...
Click to collapse
Please, send me accessibility to firmware. Thanks
Hi guys,
I had a big problem with my TV box H96max X3 Amlogic S905X3, which constantly restarts in a loop after 40 minutes of use and then unable to access the home screen. I flashed it by upgrading the firmware and the upgrade operation was successful by following the process posted on my post below:
https://forum.xda-developers.com/an...gic-s905x3-how-to-reset-t4132107#post83047297
After flashing, the problem has certainly decreased, it restarts less but it has not disappeared and remains unusable.
Please, do you have an idea of the problem but especially if there is a solution.
I used :
- the USB 3.0 male-male cable with a laptop
- USB Burning Tool software v2.1.7.0
- u215.H96Max_X3_1000M_9.0.2020.01.13.11.33.img
I await your help and thank you in advance.
difahtic said:
Hi guys,
I had a big problem with my TV box H96max X3 Amlogic S905X3, which constantly restarts in a loop after 40 minutes of use and then unable to access the home screen. I flashed it by upgrading the firmware and the upgrade operation was successful by following the process posted on my post below:
https://forum.xda-developers.com/an...gic-s905x3-how-to-reset-t4132107#post83047297
After flashing, the problem has certainly decreased, it restarts less but it has not disappeared and remains unusable.
Please, do you have an idea of the problem but especially if there is a solution.
I used :
- the USB 3.0 male-male cable with a laptop
- USB Burning Tool software v2.1.7.0
- u215.H96Max_X3_1000M_9.0.2020.01.13.11.33.img
I await your help and thank you in advance.
Click to expand...
Click to collapse
Did you check the temperature of the box? There are certain apps that can show constantly the temperature (since you state that the restarts happen after about 40 min of use). What kind of apps you use? Maybe 4K videos (which stress the processor)?
I use mine constantly upon a USB fan.
It's a recent model with
ath156 said:
Did you check the temperature of the box? There are certain apps that can show constantly the temperature (since you state that the restarts happen after about 40 min of use). What kind of apps you use? Maybe 4K videos (which stress the processor)?
I use mine constantly upon a USB fan.
Click to expand...
Click to collapse
Hi ath165,
Thank you for your availability for each request for help.
It's a new BOX that I didn't test in time. it just contained the IPTV Smarters Pro application without subscription and after flashing, it contains no additional application, it even restarts using Youtube in HD or SD and even without using it. Me too I thought of the CPU that overheat so quickly, weird because the TV box is a recent model, the processor is good then it has RAM 4GB and ROM 128.
What is the pic of temperature overshoot, 70°C, 80°C?
Do you have to suggest an application with which I will test, "CPU float"?
Should I buy a fan, a model that will be placed under the Box?
Thank you for supporting me.
Download the following app https://mega.nz/file/J8cSRQST#ofOZ0fIwro2jUym_rfa_-VP-Na_8Y_mUwdugv9Qd5lU or CPU float
I use a USB fan for every of my 3 TV boxes. I place them under the box. I made them by myself, using old parts of unused PCs (towers, etc).
Of course you can buy one from the Internet for a small amount of money. It is better to buy a model which has a switch also (some of them with 3 speeds) because the USB ports of our box still have power even when you turn it off completely !!!!!!! So if there is no switch it is going to function 24/24 & 7/7.
I didn't even take advantage of my box and I begin already to have problems. I read that on the new boxes, the H616 processor does not overheat.
Thank you very much for the application and your precious advice for the choice of fan and all of other :good:
H616 processor ??????????? I think we are talking about S905X3 !
ath156 said:
H616 processor ??????????? I think we are talking about S905X3 !
Click to expand...
Click to collapse
No, not for this box, H616 is the first Allwinner processor with Mali-G31MP2 and which supporting Android 10. It also consume less power, so we say it doesn't overheat.
Hi guys,
Even after putting my box on a fan that I bought, the constant restarting problem is not solved so frankly I don't know what to think !!!!! ????? :crying::crying::crying::crying:
difahtic said:
Hi guys,
Even after putting my box on a fan that I bought, the constant restarting problem is not solved so frankly I don't know what to think !!!!! ????? :crying::crying::crying::crying:
Click to expand...
Click to collapse
If you have another power adaptor (with at least the same Amperes as the original) try that. Sometimes the power adaptors cause similar problems, although this is not a common problem for H96 max X3 boxes (as far as I know).