Related
Hey guys. So, I bricked my phone. I installed RomManager, then ClockworkMode through it, thus I knew that this phone is not supported. It wasn't there in that list, so I chose Commtiva z71 or something like that. My phone doesn't get in download mode anymore. Could this be fixed at home? I really don't want to take it to a service centre.
Please help me. Thanks!
There's a few people who have done this and I don't think any of them have been able to find a way to get it working again. I think you will have to send it to repairs, sorry
Sent from my GT-I5500 using Tapatalk
after rooting my phone samsung galaxy 5 doesnt turn on
i root my phone with universal androot,everything was ok,i reboot my phone and tray with rom manager to do a backup of my rom,i choose a model that wasent my model,and after that i tray to partition my sd card and was there when my phonr turn off and its never turn on again.............,do someone have a solutions!!!!!!
Jordanooo said:
There's a few people who have done this and I don't think any of them have been able to find a way to get it working again. I think you will have to send it to repairs, sorry
Sent from my GT-I5500 using Tapatalk
Click to expand...
Click to collapse
Sent from my GT-I5500 using Tapatalk
Threw it guys. It sucked anyway.
It doesn't suck, its amazing
Sent from my GT-I5500 using Tapatalk
dead ur smart
quebeco said:
i root my phone with universal androot,everything was ok,i reboot my phone and tray with rom manager to do a backup of my rom,i choose a model that wasent my model,and after that i tray to partition my sd card and was there when my phonr turn off and its never turn on again.............,do someone have a solutions!!!!!!
Click to expand...
Click to collapse
Exactly as u .i try to backup my rom and my samsung was dead in 5 seconds.I sent them to service twice The firt my motherboard is dead and i wait the second time because i thing is dead again I dont use rom manager never
did you tried to download ClockWorkmodRecovery(cwm) than flash with odin multi downloader and then wipe data?
first step i found in solving this issue
i also flashed the same recovery through rom manager. i think i have found the first step in solving this issue. all now is that i need help of all of you guys.
All I did was removed my battery while still being connected to usb . After this i kept holding the option button (the button on the upper leftmost side) and with this being hold i inserted the battery. Now my pc recognised the device as samsung usb composite device and also the odin recognises it. but whatever i try my phone stucks at setup connection in odin. pls help.
this can help thousands of bricked g5s.:angel::angel::angel::angel::angel:
no need
rstar900 said:
i also flashed the same recovery through rom manager. i think i have found the first step in solving this issue. all now is that i need help of all of you guys.
All I did was removed my battery while still being connected to usb . After this i kept holding the option button (the button on the upper leftmost side) and with this being hold i inserted the battery. Now my pc recognised the device as samsung usb composite device and also the odin recognises it. but whatever i try my phone stucks at setup connection in odin. pls help.
this can help thousands of bricked g5s.:angel::angel::angel::angel::angel:
Click to expand...
Click to collapse
no need to pull battery out and insert it back just insert the battery ,hold down the option key & insert usb cable thats it....but none of these gonna work you will need JTag to flash
You can even try JIG. Because, you've messed with recovery and boot partition but not the arm11boot (bml8). So, JIG (search Google, it is as cheap as $2 and you can even make one at home) can help you.
If it didn't, just search for JTAG services nearby your area. They'll charge you $20-$40 and your g5'll be alive.
Bhargav97 said:
You can even try JIG. Because, you've messed with recovery and boot partition but not the arm11boot (bml8). So, JIG (search Google, it is as cheap as $2 and you can even make one at home) can help you.
If it didn't, just search for JTAG services nearby your area. They'll charge you $20-$40 and your g5'll be alive.
Click to expand...
Click to collapse
That's not true, sadly. ROM Manager embeds a version of flash_image that will try to flash a boot image to bml8 if the device is not properly recognised. That's what happened for the OP, so a JIG will not resurrect the phone.
Oh...Sorry, I didn't knew that! So, final option left for OP is a JTAG flash.
@psyke83
Seems like out of your 3 bricks, this is one.
hello, yesterday i wanted to flash a new rom.
i made full wipe, deleted cache and dalvik cache.
and i made a restart before flashing the new rom.
now i get the message: device is locked, status code:0
battery ok
ok to program
transfer mode:
usb connected
what can i do to rescue the phone ? it has been bought 3 weeks ago in germany for 489 euro.
All razrs currently have the locked status, it's referring to the boot loader which moto has declined to unlock.
Sent from my XT910 using xda premium
is there no way to get it unlocked ?
489 has been paid 3 weeks ago. the phone is only 3 weeks old. it has been used for 1 week ((
kirmizibasliklioglan said:
is there no way to get it unlocked ?
489 has been paid 3 weeks ago. the phone is only 3 weeks old. it has been used for 1 week ((
Click to expand...
Click to collapse
Can you charge the battery?
It's normal, nothing wrong happened.
At this time you can flash a new compatibile rom via RSD
hello, i can charge the battery. there is no problem. but i can not find a compitable rom. i have tried 2 different roms, unsuccesfull. i always get an error message after a few steps. the phone is connected, drivers are installed, but there is no compitable rom do you have a link for me ?
kirmizibasliklioglan said:
hello, i can charge the battery. there is no problem. but i can not find a compitable rom. i have tried 2 different roms, unsuccesfull. i always get an error message after a few steps. the phone is connected, drivers are installed, but there is no compitable rom do you have a link for me ?
Click to expand...
Click to collapse
Go Motorola Suport Website and look for Warranty. Provide your IMEI number and you'll get the service provider (carrier) you phone is attached. Then you'll know wich rom to flash.
Motorola Support - Warranty Status
hi thank you for the link. motorola germany can not help me because the device has been rooted, they told.
now i can not charge the battery. battrery low is to see on the display
i can connect my phone to pc but i dont know how and which rom i can flash
kirmizibasliklioglan said:
hi thank you for the link. motorola germany can not help me because the device has been rooted, they told.
now i can not charge the battery. battrery low is to see on the display
i can connect my phone to pc but i dont know how and which rom i can flash
Click to expand...
Click to collapse
But can you normally reboot your phone now?
You need to recharge before attempting to flash.
If you can't do this, try this link. I don't know if it works
http://forum.xda-developers.com/showthread.php?t=1549625
I think you can flash 651.167.26 or .19/20. You can find it on Motorola official roms thread
http://www.android-hilfe.de/root-hacking-modding-fuer-motorola-razr/232299-factory-adapter.html
5€ and your Phone will be fine...
To charge your phone: Click the link
To load a stock ROM: Click the link
If you still have questions, there's usually someone here.
okay, i believe i have solved this problem.
i have opened the back cover, cut the usb cable (from my old htc)
connected black to minus
connecten red to plus and plugged in to power...
after 5 minutes battery was ok, instead of "battery low"
i have uninstalled the old rsd lite
downloaded rsd lite v5.6
downloaded "SPDREM_U_01.6.5.1-167_SPU-15-M2_SIGNEuropeAustraliaEMEA_USASPDRRTGB_HWp2b_Service1FF_fastboot.xml" sorry, i don´t know the link
i have pressed volume down, volume up and power button.
selected fastboot mode.
started rsd lite
selected the "spdrem_u_..." file
and pressed start. it took about 15 minute
i will upload a few photos tonight
thank you for your help
kirmizibasliklioglan said:
hi thank you for the link. motorola germany can not help me because the device has been rooted, they told.
now i can not charge the battery. battrery low is to see on the display
i can connect my phone to pc but i dont know how and which rom i can flash
Click to expand...
Click to collapse
Get your IMEI in sdcard door of your razr then visit motorola support website I posted and you'll know wich rom to flash. You'll need to flash it with a factory cable as said above.
Good luck!
Sent from my XT910 using Tapatalk 2
kirmizibasliklioglan said:
okay, i believe i have solved this problem.
i have opened the back cover, cut the usb cable (from my old htc)
connected black to minus
connecten red to plus and plugged in to power...
after 5 minutes battery was ok, instead of "battery low"
i have uninstalled the old rsd lite
downloaded rsd lite v5.6
downloaded "SPDREM_U_01.6.5.1-167_SPU-15-M2_SIGNEuropeAustraliaEMEA_USASPDRRTGB_HWp2b_Service1FF_fastboot.xml" sorry, i don´t know the link
i have pressed volume down, volume up and power button.
selected fastboot mode.
started rsd lite
selected the "spdrem_u_..." file
and pressed start. it took about 15 minute
i will upload a few photos tonight
thank you for your help
Click to expand...
Click to collapse
nice to hear it worked. Cheers
Sent from my XT910 using Tapatalk 2
Hello,
I have Jiayu G3 which is bricked, it is completely dead, cannot power on, no charging, no recovery....
so i need help please, i also tried this: With the battery out, hold the volume up, don't let go & plug in the USB cable will activate META mode for few seconds.
but this is not working because my pc does not detects it....
so please i need other solution or how to find test points on Jiayu g3 ?
thank you !!!
chief_wolfinjo said:
Hello,
I have Jiayu G3 which is bricked, it is completely dead, cannot power on, no charging, no recovery....
so i need help please, i also tried this: With the battery out, hold the volume up, don't let go & plug in the USB cable will activate META mode for few seconds.
but this is not working because my pc does not detects it....
so please i need other solution or how to find test points on Jiayu g3 ?
thank you !!!
Click to expand...
Click to collapse
hi how did you brick your G3?
mine is semi-brick, I was updating Lewa OTA then when iot rebooted the screen was like just snow on a TV Set
I took out the battery then now it just stays at the Lewa Logo.
I'm trying SP flash method but still no go
give this a shot
https://plus.google.com/113031144280405994468/posts/Td1SNjjZWaN
http://forum.xda-developers.com/showthread.php?t=1943442
mengfei said:
hi how did you brick your G3?
mine is semi-brick, I was updating Lewa OTA then when iot rebooted the screen was like just snow on a TV Set
I took out the battery then now it just stays at the Lewa Logo.
I'm trying SP flash method but still no go
give this a shot
https://plus.google.com/113031144280405994468/posts/Td1SNjjZWaN
http://forum.xda-developers.com/showthread.php?t=1943442
Click to expand...
Click to collapse
Hi
thank you for the reply, but this unfortunately did not help, my G3 just wont power up
maybe with test points it will power up... but i dont which one to use on motherboard
thank you
chief_wolfinjo said:
Hi
thank you for the reply, but this unfortunately did not help, my G3 just wont power up
maybe with test points it will power up... but i dont which one to use on motherboard
thank you
Click to expand...
Click to collapse
try SP Flash method that needs NO battery
http://techideki.com/how-to-root-jiayu-g3-working-recovery-mode/
http://vondroid.com/threads/cwm-recovery-jiayu-g3.4837/
http://androidunbricked.blogspot.com/2013/06/unbrick-your-mtk6577-android-mobile.html
just got my G3 up & running again via SP Flashtool, important thing is that you must have the drivers installed
http://www.needrom.com/tutorial-mt657x-flashing/
mengfei said:
just got my G3 up & running again via SP Flashtool, important thing is that you must have the drivers installed
http://www.needrom.com/tutorial-mt657x-flashing/
Click to expand...
Click to collapse
thank you
I will try that today when i come home.
otherwise Do you know which test points will power up ?
Hi I have the Jiayu g3s which is the quad core variant. I have my phone too but it boots up and goes until the boot logo where it freezes please help
revive JIAYU G3S(G3T)
I BRICKED MY PHONE USING A ROM NOT PROPER FOR MY DEVICE JIAYU G3S(G3T). AFTER THIS, THE PHONE WON'T CHARGE, WON'T START, IT WAS DEAD. BUT AFTER HOURS SPENT SERCHING ON THE INTERNET, I WAS ALLOWED TO FIND WHAT I NEEDED TO REVIVE MY PHONE: ROM "JY-G3-20130523-102107" UNDER "SP_Flash_Tool_v3.1332.0.187". IN WINXP AFTER INSTALLING DRIVERS, MY DEVICE WAS DETECTABLE WHEN I PLUG IT, WITH NO BATTERY IN "SP_Flash_Tool_v3.1332.0.187" , SCATTER - LOADING PUT/MOUNT THE FILE FROM ROM "JY-G3-20130523-102107" NAMED "MT6589_Android_scatter_emmc" AND HIT "FIRMWARE->UPGRADE" CONNECT THE PHONE TO PC WITH NO BATTERY AND PUSH NOT FOR LONG, POWER BUTTON AND VOLUME MINUS/DOWN. AFTER THAT THE PROCESS OF RESTORE THE SOFT IN THE PHONE IT SHOULD STARTING. THANKS TO ANYONE WHO POSTED THE SOFTWARE NEEDED. FOR A FEW DAYS HERE IS A DOWNLOAD LINK
don't forget to add (point) .html at the end
fastupload.rol.ro/8d37335019a3fa55a5decead42e8b667
there is a official rom on this page:
www.talkingmobi.com/rom-download-2/rom-download-2013-may-2014/
scroll through it there are many roms but it is there.
you can also find the flashing guide and tools to download you need to reply to the posts there to see the links i know it is a odd restriction and also no right clicking is allowed
used that to fix my bricked Jiayu G3T and it worked
good luck
Samsung S7262 Brick
How To Unbrick Samsung S7262
Information Required
uniontelecom said:
Samsung S7262 Brick
How To Unbrick Samsung S7262
Click to expand...
Click to collapse
Hey can you provide some information that how did it get bricked?
I will try to help you out because have have the same phone!
uniontelecom said:
Samsung S7262 Brick
How To Unbrick Samsung S7262
Click to expand...
Click to collapse
soft or hard brick ....is it booting in download mode??
S7262 After Unlock Dead Via Z3x Box By Selecting The Wrong Model. Unlock Complete But Set Is Dead.
S7262 Is Now Dead Condition Not Going To Download Mode . Its Have Spreadtrum Cpu
When I Press Vol Up Key And Connect Cable Set Connect In Device Manager And Show Sci2ser Com.
How To Flash IN This Case.
Kindly Look......
Thank You.
Here for Help!
uniontelecom said:
S7262 After Unlock Dead Via Z3x Box By Selecting The Wrong Model. Unlock Complete But Set Is Dead.
S7262 Is Now Dead Condition Not Going To Download Mode . Its Have Spreadtrum Cpu
When I Press Vol Up Key And Connect Cable Set Connect In Device Manager And Show Sci2ser Com.
How To Flash IN This Case.
Kindly Look......
Thank You.
Click to expand...
Click to collapse
Hmm i think you Should try to flash Clockworkmod recovery using Research download...
i hope it will work for you... Once if you succeeded and clockworkmod booted you can do anything!
1st i have to mention that i have never used Research download but i did quite a research on it!
2nd i can not give guarantee that it will work! but do hope that it will work :silly:
Now lets start!
it has been reported that ResearchDownload drivers will not work with windows 7 or 8 you will need windows xp you can also install windows xp in Oracle VM VirtualBox once you got hand on xp you can try this!
1: download all these attached files to move forward :angel:
2: install spreadturm drivers
now before you flash your phone with researchDownload you should know that it can change you phone's IMEI number SO BE AWARE!!!
So i will suggest you to read this post
How to use NVEditor Tool http://forum.xda-developers.com/showthread.php?t=2018023&page=13
i don't know that how to tackle that problem you have to look it by your self
now you have to learn that how ResearchDownload works
(4.1 - Learn how ResearchDownload Work) read that from this page http://forum.xda-developers.com/showthread.php?t=2165554
basically the writer of the post is explaining how to root spreadturm phone but if you are smart enough you can gather information that you need!
once you understood how to use ResearchDownload i strongly believe that you will recover your phone! Goodluck!
I KNOW THE GUIDE IS NOT THAT GOOD BUT IF YOU WILL DEEPLY TRY TO UNDERSTAND WHAT I AM TRYING TO SAY I THINK THAT YOU WILL END UP WITH SOME GOOD RESULT
FEEL FREE TO ASK ANY QUESTION & GOOD LUCK
HIT LIKE IF IT HELPS :silly:
@ wahab96
Need Spered 6820i Fdl Files.
Thank You
uniontelecom said:
@ wahab96
Need Spered 6820i Fdl Files.
Thank You
Click to expand...
Click to collapse
Hey
have tried the All FDL files provided in attachments?
try them all!
wahab96 said:
Hey
have tried the All FDL files provided in attachments?
try them all!
Click to expand...
Click to collapse
Recovery File Write Success . But Still Dead Not Going To Download Moad.
Thank You.
uniontelecom said:
Recovery File Write Success . But Still Dead Not Going To Download Moad.
Thank You.
Click to expand...
Click to collapse
hi thats good! now tell me that is your phone giveing any response... or still dead!
And try this
1 take out your phones battery
2 reinsert it back
3 hold power button for 2 seconds
4 (after 2 seconds) while holding power button hold home & VOL-UP buttons at same time
5 while holding home & VOL-UP buttons release power button
6 then wait for 15 seconds...
there should be Clockworkmod recovery booted! if it does please report me! So i can tell you next step!
|GOOD LUCK! :good:
wahab96 said:
hi thats good! now tell me that is your phone giveing any response... or still dead!
And try this
1 take out your phones battery
2 reinsert it back
3 hold power button for 2 seconds
4 (after 2 seconds) while holding power button hold home & VOL-UP buttons at same time
5 while holding home & VOL-UP buttons release power button
6 then wait for 15 seconds...
there should be Clockworkmod recovery booted! if it does please report me! So i can tell you next step!
|GOOD LUCK! :good:
Click to expand...
Click to collapse
Try But Still Dead Not Going Download Mode. Not Going To Recovery Mode.
thank You.
that bad... but there is a way!
uniontelecom said:
Try But Still Dead Not Going Download Mode. Not Going To Recovery Mode.
thank You.
Click to expand...
Click to collapse
now you know how to flash with researchdownload! and thats a strong + point you have :good:
because your phone is fully bricked please try to flash full stock rom with researchdownload
here is a link to stock rom http://samsung-updates.com/device/?id=GT-S7262 download the rom of your country
and then download 7zip http://www.7-zip.org/
and extract tar.md5 file with 7zip...
there you will see couple of .img files (for example boot.img recovery.img system.img etc) try flash complete Stock rom with Researchdownload because you phone is fully bricked and i believe Researchdownload can make it back to working! or you should try to take it to samsung customer care! don't tell them what you did just say i don't know what happened please check it... or claim your phone's warranty!
wahab96 said:
now you know how to flash with researchdownload! and thats a strong + point you have :good:
because your phone is fully bricked please try to flash full stock rom with researchdownload
here is a link to stock rom http://samsung-updates.com/device/?id=GT-S7262 download the rom of your country
and then download 7zip http://www.7-zip.org/
and extract tar.md5 file with 7zip...
there you will see couple of .img files (for example boot.img recovery.img system.img etc) try flash complete Stock rom with Researchdownload because you phone is fully bricked and i believe Researchdownload can make it back to working! or you should try to take it to samsung customer care! don't tell them what you did just say i don't know what happened please check it... or claim your phone's warranty!
Click to expand...
Click to collapse
After Extract Home File i Found File boot,cache,hidden,modem,param,recovery,system And Flashed Via Research Downloader Write Success
Still Dead But Now I Have Same Ok Set Can You Give Me Any Software For Read Full Flash And Write Full Flash
Thank You
uniontelecom said:
After Extract Home File i Found File boot,cache,hidden,modem,param,recovery,system And Flashed Via Research Downloader Write Success
Still Dead But Now I Have Same Ok Set Can You Give Me Any Software For Read Full Flash And Write Full Flash
Thank You
Click to expand...
Click to collapse
what's your FDL always stack on broadband checking what i must chose and what i must to do exactly
good but the needed its a reasearchdownload .pac file backup
wahab96 said:
Hmm i think you Should try to flash Clockworkmod recovery using Research download...
i hope it will work for you... Once if you succeeded and clockworkmod booted you can do anything!
1st i have to mention that i have never used Research download but i did quite a research on it!
2nd i can not give guarantee that it will work! but do hope that it will work :silly:
Now lets start!
it has been reported that ResearchDownload drivers will not work with windows 7 or 8 you will need windows xp you can also install windows xp in Oracle VM VirtualBox once you got hand on xp you can try this!
1: download all these attached files to move forward :angel:
2: install spreadturm drivers
now before you flash your phone with researchDownload you should know that it can change you phone's IMEI number SO BE AWARE!!!
So i will suggest you to read this post
How to use NVEditor Tool http://forum.xda-developers.com/showthread.php?t=2018023&page=13
i don't know that how to tackle that problem you have to look it by your self
now you have to learn that how ResearchDownload works
(4.1 - Learn how ResearchDownload Work) read that from this page http://forum.xda-developers.com/showthread.php?t=2165554
basically the writer of the post is explaining how to root spreadturm phone but if you are smart enough you can gather information that you need!
once you understood how to use ResearchDownload i strongly believe that you will recover your phone! Goodluck!
I KNOW THE GUIDE IS NOT THAT GOOD BUT IF YOU WILL DEEPLY TRY TO UNDERSTAND WHAT I AM TRYING TO SAY I THINK THAT YOU WILL END UP WITH SOME GOOD RESULT
FEEL FREE TO ASK ANY QUESTION & GOOD LUCK
HIT LIKE IF IT HELPS :silly:
Click to expand...
Click to collapse
good but the needed its a reasearchdownload .pac file backup maked from a working phone
i have flashed a .pac file from another device
now the device vibrates at startup :cyclops: and can be detected as adb but stay offline and if i try to enter in odin mode and the smart is detected as fastboot device but nothing can be flashed by the fastboot flash option and the fastboot oem unlock make anything hapen :crying:
i realy need a backup in .pac for this device. please if you can provide me,i really gonna like this :good: :fingers-crossed: ,but i don't have another one as the same to make this :crying:
and the only thing of i can make is get from anyone in the internet
but if you anyone like to try the files i wanna put the links here to this feedback :good:
download the rom file:http://www.needrom.com/download/lenovo-a376-sc8825/
and download the file in this tutorial https://www.youtube.com/watch?v=xQS3o7zwOG0
and them with the gpg dragon opened select spreadtrum(spd) tab them select the com port of the device conection the mine is (COM3)
them select sc8825 and flash_write and in the (...) button at the boton of the window select the .pac file and conect the smart and them click on START the file gonna be processed and the program gonna ask you to comfirm and press OK button wait the flash and now you already now what happen with you phone.
its a short tutorial
if i have broked any rule : I'M SORRY,I'M NEWER IN XDA DEVELOPERS
so, did anyone maneged to repair this set ?
wahab96 said:
hi thats good! now tell me that is your phone giveing any response... or still dead!
And try this
1 take out your phones battery
2 reinsert it back
3 hold power button for 2 seconds
4 (after 2 seconds) while holding power button hold home & VOL-UP buttons at same time
5 while holding home & VOL-UP buttons release power button
6 then wait for 15 seconds...
there should be Clockworkmod recovery booted! if it does please report me! So i can tell you next step!
|GOOD LUCK! :good:
Click to expand...
Click to collapse
This worked for me to get into download mode.
Thank! for a second there I thought I bricked a stranger guy's phone
Hi I have a sumsung gt-s7262.I rooted my phone and did a few changes to the stock rom and soft bricked it . I managed to install cwm and it seems all data on the phone has been deleted. Is it okay for me to flash another rom or should i do something else first ? An answer will be greately appreciated.
GT-S7262
Hard bricked and not detecting device too..
Plzzz help me..
Seems Like HArd Bricked<Plz help>
Hi,
Let me first state the story behind the issue. Two days ago my Samsung S7262 got restart issue as it was not booting and was stucking in the first screen.The Phone was getting heated....Later,I tried to hard reset which did not work,so I went on flushing the ROM.Now, I am very new to this and did not have any prior expertise in it. I used Odin v3 and go Flash File from a site for India(I live in India) and tried to flash the ROM. It got completed but I still faced the issue. Then again I flashed once again which Pass ed too,but again the boot loop issue persist.Now, this time I picked another flash file from another site which was relatively larger and it was too for India. This time I tried to flash...after Pass the phone got hanged and I mistakenly removed the USB and then no display was there and it was looking like a brick!!! Later I researchd and now I repent had I went to service centre instead of applying my wicked engineering mind .Now, after much research, I found that now the phone is detected by PC's device manager but no display and still have that looping issue(I know this bcoz I am able to hear booting sound)...Plz help!!!
I had got my samsung galaxy star pro soft bricked and started to reserch about unbrick
But afraid of going ahead without true guide .
Any one plese help me.
I need complete guide with every single step.
?????.................
Hello, I have a big problem with the phone. It's no turning on after trying to flash.
I can see it as MTK USB Port (ComX), but there is no way to flash it again because of "enable dram failed (4032)" in FlashTool.
How to fix it?
pawelb93 said:
Hello, I have a big problem with the phone. It's no turning on after trying to flash.
I can see it as MTK USB Port (ComX), but there is no way to flash it again because of "enable dram failed (4032)" in FlashTool.
How to fix it?
Click to expand...
Click to collapse
Remove the back cover and connect your phone with the pc through data cable and kept pressing the red button for 10 secs which is near the sd card slot and release it. It will vibrate and lit up after 2-3 secs then remove the cable and start it.
Manek88 said:
Remove the back cover and connect your phone with the pc through data cable and kept pressing the red button for 10 secs which is near the sd card slot and release it. It will vibrate and lit up after 2-3 secs then remove the cable and start it.
Click to expand...
Click to collapse
It doesn't work. No vibration at all.
pawelb93 said:
It doesn't work. No vibration at all.
Click to expand...
Click to collapse
Prepare the rom to flash, then press firmware ugrade, plug your usb cable, keep pressed the red button for 20 secconds to reset preloader and tell us what is going on ?
stympy said:
Prepare the rom to flash, then press firmware ugrade, plug your usb cable, keep pressed the red button for 20 secconds to reset preloader and tell us what is going on ?
Click to expand...
Click to collapse
Now, I am also having the same problem. I followed your instruction but persist the same error DRAM FAILED 4032 and also I dont have any nandroid backup. Whether it will be related to preloader issue ?
Hi pawelb93 and Manek88,
+1
I'm having the same problem as well. I was using this tuto and all went fine because I got the big green circle of success from Flash tool. Then I unplugged my phone and it hasn't booted since. It was :crying: a 4GB international version with Jelly Bean 4.2.
d8v8n8 said:
Hi pawelb93 and Manek88,
+1
I'm having the same problem as well. I was using this tuto and all went fine because I got the big green circle of success from Flash tool. Then I unplugged my phone and it hasn't booted since. It was :crying: a 4GB international version with Jelly Bean 4.2.
Click to expand...
Click to collapse
My problem has been solved.
Hii d8v8n8 have you tried pressing the red button by plugging to pc ??
If you have a 4032 dram problem you need to format whole drive using sp flash tool and install a fresh stock rom.
Manek88 said:
My problem has been solved.
Hii d8v8n8 have you tried pressing the red button by plugging to pc ??
If you have a 4032 dram problem you need to format whole drive using sp flash tool and install a fresh stock rom.
Click to expand...
Click to collapse
Hi Manek88,
Yup, I pressed and pressed the red button, once even for a full minute without a break but to no avail.
However and fortunately from another poster, stympy, I got the suggestion that it might be a driver problem. For the unfortunate user, please click on the embedded links for the steps it took me to get things sorted out.
I wish sincerely for the wary who landed here to be able to solve his or her issue with our trials and errors posted here. Thank you all.
Club of anonymous brickers
Hi, I just wanted to leave a comment about how I unbricked my Chineese p780 4Gb. Maybe useful to somebody.
Flashed the wrong ROM, got the brick, the only sign of life was a red LED when connecting to USB. After the second flashing got the same DRAM_FAIL (4032) error. Finally, after finding the right ROM I got phone's screen blinking for a second, but still not loading and not functioning.
So, after some experiments I found out that fresh driver/tools versions do matter a lot and I managed to flash the same needed ROM with fresher tools.
Setup (can't post links, I downloaded these from lenovo-forums dot ru):
- driver SP_Flash_Tool_Driver_Auto_Installer_v1.1236.00
- SP_Flash_TOOLS v5.1352.01
- very nice light and functional ROM LiFe v0.7 with modified preloader
- alternative modem V51 S820
Good luck!
1eqinfinity said:
"Club of anonymous brickers"
Click to expand...
Click to collapse
:highfive:
1eqinfinity said:
(...) Finally, after finding the right ROM I got phone's screen blinking for a second, but still not loading and not functioning.
So, after some experiments I found out that fresh driver/tools versions do matter a lot and I managed to flash the same needed ROM with fresher tools. (...)
Good luck!
Click to expand...
Click to collapse
Thanks 1eqinfinity for confirming this :good: and I'm glad you were successful as well .
hello dear
I have samsung note3 clone sm-n9006 fcc id a3lsm-n9006 no way to flash it because of "enable dram failed (4032)" in FlashTool.
now phone is dead
How to fix it?
Please Help me Also
I rooted and Suddenly reset My phone My phone was Only showing Logo and i also Dont Have Any backup And I download Stock rom From Internet And Flashed My Phone By sp flash tool But After It Not Starting Please Help and Thankss Please
ShreyashM576 said:
I rooted and Suddenly reset My phone My phone was Only showing Logo and i also Dont Have Any backup And I download Stock rom From Internet And Flashed My Phone By sp flash tool But After It Not Starting Please Help and Thankss Please
Click to expand...
Click to collapse
Look for your phone on uncle Google and see what kind of hardware do you have....
After that you can repair the phone...
stympy said:
Look for your phone on uncle Google and see what kind of hardware do you have....
After that you can repair the phone...
Click to expand...
Click to collapse
My Phone Has Mt6582 Chipset And android lollipop
And It Doesnt Start
But Shows Com port On my pc i tried Flashing again By Sp flash tool but it say D Ram Fail
ShreyashM576 said:
My Phone Has Mt6582 Chipset And android lollipop
And It Doesnt Start
But Shows Com port On my pc i tried Flashing again By Sp flash tool but it say D Ram Fail
Click to expand...
Click to collapse
Can you tell me how many Gb have the internal memory and how much RAM?
NVM.
Try to flash one of this 3 Firmware. LINK HERE!
If you dont see anything inside the folders tell me! Or wait one hour to get uploaded!
stympy said:
Can you tell me how many Gb have the internal memory and how much RAM?
NVM.
Try to flash one of this 3 Firmware. LINK HERE!
If you dont see anything inside the folders tell me! Or wait one hour to get uploaded!
Click to expand...
Click to collapse
It has 1Gb Of Ram
And 8Gb Of internal Storage
Links To download Rom Is Not Showing
Will they work For my phone
ShreyashM576 said:
It has 1Gb Of Ram
And 8Gb Of internal Storage
Links To download Rom Is Not Showing
Will they work For my phone
Click to expand...
Click to collapse
Press on the "LINK HERE". Should take you to Google Drive.
Try second and third.
Should work.
ShreyashM576 said:
It has 1Gb Of Ram
And 8Gb Of internal Storage
Links To download Rom Is Not Showing
Will they work For my phone
Click to expand...
Click to collapse
It worked? How about some feedback?
And witch one!
Giving Brom Error S NOT ENOUGH MEMORY when using Third rom with given Flash Tool and I tried It with The Latest version Of Flash Tool but Its Not working Now Trying Second Rom
ShreyashM576 said:
Giving Brom Error S NOT ENOUGH MEMORY when using Third rom with given Flash Tool and I tried It with The Latest version Of Flash Tool but Its Not working Now Trying Second Rom
Click to expand...
Click to collapse
Ok. Waiting for feedback.