hi had the mate 10 root with the, fastboot flash recovery_ramdisk recovery_ramdisk.img
I'm trying to close the bootloader and throw this at me:
the version that I have is ALP-LGRP2-OVS 9.0.0228 of the FirmwareFinder I have lowered the vesion and I have removed the update.app, I have removed the system.img, I have put it by fastboot, and it keeps me throwing the same error.
I have also tried the dload method.
putting in the folder only the:
UPDATE.APP
and putting both
UPDATE.APP
update_full_base.zip
It gives me the same error.
any ideas?
bloudin said:
hi had the mate 10 root with the, fastboot flash recovery_ramdisk recovery_ramdisk.img
I'm trying to close the bootloader and throw this at me:
the version that I have is ALP-LGRP2-OVS 9.0.0228 of the FirmwareFinder I have lowered the vesion and I have removed the update.app, I have removed the system.img, I have put it by fastboot, and it keeps me throwing the same error.
I have also tried the dload method.
putting in the folder only the:
UPDATE.APP
and putting both
UPDATE.APP
update_full_base.zip
It gives me the same error.
any ideas?
Click to expand...
Click to collapse
You cannot lock the bootloader with TWRP and root installed and still access the system .
If You want lock bootloader (not re-lock) , You have to flash Service ROM from dload (this process will erase all the data from your device!).
bozka1 said:
You cannot lock the bootloader with TWRP and root installed and still access the system .
If You want lock bootloader (not re-lock) , You have to flash Service ROM from dload (this process will erase all the data from your device!).
Click to expand...
Click to collapse
but what low version? and what do I put in the dload folder? thanks for answering
bloudin said:
but what low version? and what do I put in the dload folder? thanks for answering
Click to expand...
Click to collapse
What's your currently build number ?
bozka1 said:
What's your currently build number ?
Click to expand...
Click to collapse
ALP-LGRP2-OVS 9.0.0228, above I explain that I have this version, have you read what I have posted?
bloudin said:
have you read what I have posted?
Click to expand...
Click to collapse
Of course, unfortunately this is wrong build number, build number must take the form e.g. 9.0.0.226(C636E2R1P12) . Cxxx is very important, Cxxx = Region/Operator. Without number of your region I can't find Service ROM for your phone, mister.
bozka1 said:
Of course, unfortunately this is wrong build number, build number must take the form e.g. 9.0.0.226(C636E2R1P12) . Cxxx is very important, Cxxx = Region/Operator. Without number of your region I can't find Service ROM for your phone, mister.
Click to expand...
Click to collapse
this, thank you very much
bloudin said:
this, thank you very much
Click to expand...
Click to collapse
Bad news - there is no Service ROM for your region (C636) , sorry...
bozka1 said:
Bad news - there is no Service ROM for your region (C636) , sorry...
Click to expand...
Click to collapse
Is there any way to download Oreo from where I am now?
bloudin said:
Is there any way to download Oreo from where I am now?
Click to expand...
Click to collapse
Try downgrade to Oreo via HiSuite.
bloudin said:
Is there any way to download Oreo from where I am now?
Click to expand...
Click to collapse
You can try HiSuite to downgrade to 8.0.
bozka1 said:
Try downgrade to Oreo via HiSuite.
Click to expand...
Click to collapse
the process ends, but on the mobile I get an error, I get the circle with the red exclamation
bloudin said:
the process ends, but on the mobile I get an error, I get the circle with the red exclamation
Click to expand...
Click to collapse
IMHO this is why you get it :
"the version that I have is ALP-LGRP2-OVS 9.0.0228 of the FirmwareFinder I have lowered the vesion and I have removed the update.app, I have removed the system.img, I have put it by fastboot, and it keeps me throwing the same error."
ALP-LGRP2-OVS 9.0.0228 is incompatible with your region.
I can't help you more, sorry.
Related
Hi everyone,
I've recently messed up terribly on the Canadian model of this phone. The model # is KII-L05 and the problem is that I'm stuck on the logo screen when booting.
I was unable to flash a custom ROM properly and have no backups. I have TWRP 3.1.1-0 installed and have tried flashing cm12.1, cm-13.0, lineage-13.0 and lineage-14.1 with the proper gapps to no success. I also tried eRecovery (with a lot of trouble getting to it using the Vol+/- because it loads TWRP 99% of the time) but it won't detect the dload/UPDATE.APP that I acquired from the Canadian Huawei support site nor will it update via wifi.
I've run out of ideas so I'd appreciate some assistance in finding a solution either getting back to stock ROM(firmware?) or a custom ROM that supports this model.
If there's already an answer posted, please pass along the link as I've come up with nothing searching and following most of what's been said before.
Thanks,
You just have an option to restore the backup if someone can share it.
shashank1320 said:
You just have an option to restore the backup if someone can share it.
Click to expand...
Click to collapse
I was hoping it wouldn't have to come to that...
For clarity, would that be using TWRP to restore the backup or using the eRecovery/UPDATE.APP method?
I'll try my luck in the file repository to see if anyone has it.
Dominic987 said:
I was hoping it wouldn't have to come to that...
For clarity, would that be using TWRP to restore the backup or using the eRecovery/UPDATE.APP method?
I'll try my luck in the file repository to see if anyone has it.
Click to expand...
Click to collapse
you should try both.
TWRP backup and dload method. any of them could work
Dominic987 said:
I was hoping it wouldn't have to come to that...
For clarity, would that be using TWRP to restore the backup or using the eRecovery/UPDATE.APP method?
I'll try my luck in the file repository to see if anyone has it.
Click to expand...
Click to collapse
Extract your update.app using a program like 7zip -- it should contain a boot.img file. Use the ADB method to manually flash the file.
While your at it, if there is a system.img file -- flash that as well.
bb709394 said:
Extract your update.app using a program like 7zip -- it should contain a boot.img file. Use the ADB method to manually flash the file.
While your at it, if there is a system.img file -- flash that as well.
Click to expand...
Click to collapse
It may not work and dload will be best option here.
Fastboot may not allow him anymore to flash anything
bb709394 said:
Extract your update.app using a program like 7zip -- it should contain a boot.img file. Use the ADB method to manually flash the file.
While your at it, if there is a system.img file -- flash that as well.
Click to expand...
Click to collapse
shashank1320 said:
It may not work and dload will be best option here.
Fastboot may not allow him anymore to flash anything
Click to expand...
Click to collapse
Your suggestions are noted.
I'll try my luck at waiting a while longer for someone with a backup until I go flashing more things.
Did you try flashing stock recovery then flashing via dload?
hassanjavaid8181 said:
Did you try flashing stock recovery then flashing via dload?
Click to expand...
Click to collapse
I mentioned in my original post that I have no backups. Unfortunately, that includes me not having stock recovery to start from scratch.
My current eRecovery doesn't recognize anything I put into dload nor does it update via wifi.
I'm currently outreaching to Huawei Canada (been more than a few days without a response) as well as friends/coworkers that may have the phone that can help with no success.
Dominic987 said:
I mentioned in my original post that I have no backups. Unfortunately, that includes me not having stock recovery to start from scratch.
My current eRecovery doesn't recognize anything I put into dload nor does it update via wifi.
I'm currently outreaching to Huawei Canada (been more than a few days without a response) as well as friends/coworkers that may have the phone that can help with no success.
Click to expand...
Click to collapse
do you have orignal firmware file for your phone?if not download it from huawei website acoording to you model number
hassanjavaid8181 said:
do you have orignal firmware file for your phone?if not download it from huawei website acoording to you model number
Click to expand...
Click to collapse
Dominic987 said:
... it won't detect the dload/UPDATE.APP that I acquired from the Canadian Huawei support site nor will it update via wifi. ...
Click to expand...
Click to collapse
No backups, that includes anywhere internal or external of the phone in question. Already tried the Huawei site and they have Marshmallow - I suspect I need anything older that's on Lollipop.
Dominic987 said:
No backups, that includes anywhere internal or external of the phone in question. Already tried the Huawei site and they have Marshmallow - I suspect I need anything older that's on Lollipop.
Click to expand...
Click to collapse
Unfortunately there are no official firmware yet for this mate. I tried looking for you but couldn't get any. Its just OTA and not full firmware that could help you with dload.
Dominic987 said:
No backups, that includes anywhere internal or external of the phone in question. Already tried the Huawei site and they have Marshmallow - I suspect I need anything older that's on Lollipop.
Click to expand...
Click to collapse
May be last option is to take it to Huawei service center they will fix it for you.
Hello,
I'm trying to find a stock rom for Turkey users. My phone stuck in bootloop so i can't do anything, of course my bootloader and frp locked. I've searched many websites but i have a bad luck honestly.
P.S. : I have only stock recovery(Erecovery)
ciscoman_ said:
Hello,
I'm trying to find a stock rom for Turkey users. My phone stuck in bootloop so i can't do anything, of course my bootloader and frp locked. I've searched many websites but i have a bad luck honestly.
P.S. : I have only stock recovery(Erecovery)
Click to expand...
Click to collapse
Run this command is fastboot mode
=> fastboot oem get-build-number
And post here the result
--
ciscoman_ said:
ANE-LX1 8.0.0.125(C432)
But i've tried many ANE-L01 or ANE-LX1 firmware, it didn't accept it. I've lost my whole hair in one night because of stress
Click to expand...
Click to collapse
You can find the link to your firmware here
--
ciscoman_ said:
Okay, i downloaded exact build number. Put it them on a folder named "dload" into my sdcard. I've entered download mode but it said "software installation failed". I tried also just UPDATE.APP but it didn't work too.
Click to expand...
Click to collapse
Please read this post
Hi Guys. My HV10 was on on EMUI 9. I tried downgrading to EMUI 8 using HuRupdater but it won't boot now and is not responding to charger getting plugged in or out. I tried plugging it in on my pc and a dialog box opened saying "Configuring USB SER for use" then nothing. It's not showing up as adb and fastboot device. Kindly help.
HiteshK5 said:
Hi Guys. My HV10 was on on EMUI 9. I tried downgrading to EMUI 8 using HuRupdater but it won't boot now and is not responding to charger getting plugged in or out. I tried plugging it in on my pc and a dialog box opened saying "Configuring USB SER for use" then nothing. It's not showing up as adb and fastboot device. Kindly help.
Click to expand...
Click to collapse
You should be able to restore from a backup using Hisuite. There is a system recovery option also.
Sent from my BKL-L09 using Tapatalk
uncleabubear said:
You should be able to restore from a backup using Hisuite. There is a system recovery option also.
Sent from my BKL-L09 using Tapatalk
Click to expand...
Click to collapse
It's telling me to boot to fastboot which I'm unable too.
Update:- I think it's in testpoint mode. I don't exactly know what it is and how to exit it.
HiteshK5 said:
Update:- I think it's in testpoint mode. I don't exactly know what it is and how to exit it.
Click to expand...
Click to collapse
You need use DC unlocked to unbrick it. But you might need to open your device.
miststudent2011 said:
You need use DC unlocked to unbrick it. But you might need to open your device.
Click to expand...
Click to collapse
It's not on the supported devices list. Should i continue?
Delete
HiteshK5 said:
It's not on the supported devices list. Should i continue?
Click to expand...
Click to collapse
Check mate 10 and 20 forums there are guides to solve your problem.
Hisuite won't work as it's hard bricked.
Btw which emui 8 version build did you flash ?
What is its xloader version?
What build are you before using this method?
miststudent2011 said:
Check mate 10 and 20 forums there are guides to solve your problem.
Hisuite won't work as it's hard bricked.
Click to expand...
Click to collapse
It would be very kind of you if you can share the link.
miststudent2011 said:
Btw which emui 8 version build did you flash ?
What is its xloader version?
What build are you before using this method?
Click to expand...
Click to collapse
I was on EMUI 9.0.0.190 (not sure if this was the exact one, it was the latest version as far as I know)and tried to downgrade to EMUI 8.0.0.171. Dunno the xloader version.
Also I borrowed my friend's DC Phoenix account and was following it's guide. Does anyone know which board this phone has so that I can download it's software.
HiteshK5 said:
It would be very kind of you if you can share the link.
I was on EMUI 9.0.0.190 (not sure if this was the exact one, it was the latest version as far as I know)and tried to downgrade to EMUI 8.0.0.171. Dunno the xloader version.
Also I borrowed my friend's DC Phoenix account and was following it's guide. Does anyone know which board this phone has so that I can download it's software.
Click to expand...
Click to collapse
Where are you from?
From India ?
If yes just go to service center they will solve the issue.
I am on mobile cant Give you the link right now.
If you go to my profile you can find a thread by me in Honor 10 forums about hard brick info there you can find the link to mate 10 forums.
miststudent2011 said:
Where are you from?
From India ?
If yes just go to service center they will solve the issue.
I am on mobile cant Give you the link right now.
If you go to my profile you can find a thread by me in Honor 10 forums about hard brick info there you can find the link to mate 10 forums.
Click to expand...
Click to collapse
Yep, from india. Trying to avoid going to the service centre as it's like 25km away from my house
Will check the forums.
Any idea about the board which this phone has. Want to try DC Phoenix
HiteshK5 said:
Any idea about the board which this phone has. Want to try DC Phoenix
Click to expand...
Click to collapse
-open up device
-install com1.0 drivers
-touch testpoint
-flash a working bootloader via DC-Phoenix BUT UNCHECK 'FLASH OEMINFO' ; when you are back in fastboot mode :
-DON'T USE a BoardSoftware file.
-just flash your B190's update.app with DC-Phoenix
oslo83 said:
-open up device
-install com1.0 drivers
-touch testpoint
-flash a working bootloader via DC-Phoenix BUT UNCHECK 'FLASH OEMINFO' ; when you are back in fastboot mode :
-DON'T USE a BoardSoftware file.
-just flash your B190's update.app with DC-Phoenix
Click to expand...
Click to collapse
It's already coming as COM 1.0 in device manager. Trying to flash update.app (only fastboot part) but it shows no device detected to upgrade. Had downloaded a board software and clicked update button. I clicked update button and it detected the device but showed that I don't have enough credits.
oslo83 said:
-open up device
-install com1.0 drivers
-touch testpoint
-flash a working bootloader via DC-Phoenix BUT UNCHECK 'FLASH OEMINFO' ; when you are back in fastboot mode :
-DON'T USE a BoardSoftware file.
-just flash your B190's update.app with DC-Phoenix
Click to expand...
Click to collapse
What are exact testpoints for V10? since there is no officially images with testpoints for V10.
It's available inside DC-Phoenix apps...
I don't have the tools to open the phone. Maybe l will need to go to a service centre on Monday. If possible please try to help in fixing this phone.
oslo83 said:
It's available inside DC-Phoenix apps...
Click to expand...
Click to collapse
Not for view10
Hi i have same problem my V10 is Brick Not ON, nOT go in Fastboot mode my Model is BKL-L09 i have downloaded DC-Phoneix in possible repair?
LTE
Sent from my Vfone 6++ using Tapatalk
Hi,
I'm using GSI-treble CAOS 11. I recently moved to the US and I don't seem to get 3G/4G in the US. 3G/4G worked when tried on another phone with the same sim.
I'm using a ANE-AL00. Is it a baseband issue? Any thoughts?
And I'm getting connected to 2.4Ghz wifi only, not sure if it's a bug.
Thanks
balamu96m said:
Is it a baseband issue?
Click to expand...
Click to collapse
Hello, it's very likely...
Look here
-Alf- said:
Hello, it's very likely...
Look here
Click to expand...
Click to collapse
I checked for the phone for which data is working and it also has similar support levels for the bands.
I'm trying flash stock ROM to see if it helps.
Thanks
balamu96m said:
I'm trying flash stock ROM to see if
Click to expand...
Click to collapse
Try eRecovery, using option "Download latest version and recovery".
https://forum.xda-developers.com/t/...ndroid-11-stable-so-far.4222155/post-84460297
The second method is flashing Service ROM aka fullStock ROM via dload method, but this process will erase all your data and lock bootloader again.
-Alf- said:
Try eRecovery, using option "Download latest version and recovery".
https://forum.xda-developers.com/t/...ndroid-11-stable-so-far.4222155/post-84460297
The second method is flashing Service ROM aka fullStock ROM via dload method, but this process will erase all your data and lock bootloader again.
Click to expand...
Click to collapse
I tried the eRecovery auto update but it always fails to get update details for me after connecting to WiFi.
With the load method, although the bootloader gets locked, I can unlock using the same unlock code right?
balamu96m said:
the same unlock code right?
Click to expand...
Click to collapse
Right, each bootloader code is permanent, it wont expire.
What is your model and build number? (for example, 9.1.0.257(C432E6R1P7) )
-Alf- said:
Right, each bootloader code is permanent, it wont expire.
What is your model and build number? (for example, 9.1.0.257(C432E6R1P7) )
Click to expand...
Click to collapse
Mine is 9.1.0.314(C675E9R1P3)
Will flashing a different modem.img work?
balamu96m said:
Will flashing a different modem.img work?
Click to expand...
Click to collapse
I don't know, I've never tried it .
Maybe this will help you:
https://forum.xda-developers.com/t/full-network-mode-preferences-on-gsi.4342225/
Or try this solution:
In SetEdit app:
1. + 'Add new setting' at the top.
2. Key in:
hw_add_4g_only
3.Tap Save.
4. In 'Edit setting', enter your mobile country code , can be found in your current APN Accses Point -> MCC . (or look for your mobile country code here )
5. Tap Save changes, close app and restart your phone.
-Alf- said:
I don't know, I've never tried it .
Maybe this will help you:
https://forum.xda-developers.com/t/full-network-mode-preferences-on-gsi.4342225/
Or try this solution:
In SetEdit app:
1. + 'Add new setting' at the top.
2. Key in:
hw_add_4g_only
3.Tap Save.
4. In 'Edit setting', enter your mobile country code , can be found in your current APN Accses Point -> MCC . (or look for your mobile country code here )
5. Tap Save changes, close app and restart your phone.
Click to expand...
Click to collapse
Thanks! I'll look into it. But I flashed stock EMUI9.1 and still, the network works only on EDGE. So, I guess it has something with hardware/firmware. I don't know the difference between LX1 and ANE-AL00 in terms of hw...wondering if I should try LX1/LX2 stock rom..
balamu96m said:
wondering if I should try LX1/LX2 stock rom..
Click to expand...
Click to collapse
I would not recommend ...
You can install only firmware for your regional variant - Al00 (C675), for example this one .
(Cxxx) is very important in determining the correct firmware to download.
-Alf- said:
I would not recommend ...
You can install only firmware for your regional variant - Al00 (C675), for example this one .
(Cxxx) is very important in determining the correct firmware to download.
Click to expand...
Click to collapse
JFYI - https://forum.xda-developers.com/t/changing-lte-bands.3769176/
-Alf- said:
JFYI - https://forum.xda-developers.com/t/changing-lte-bands.3769176/
Click to expand...
Click to collapse
Thanks again!
So, based on that, I flashed LX3 oeminfo and LX3 stock from. My phone is now rebranded to LX3 but still, I'm getting only EDGE! Probably that's all I can do I guess. I'll check with the operator once but then I don't have much hope too!
Anyway it was an interesting exercise (also consumed a lot of time)
Cheers!
Hi after long time when i repaired my phone i saw that my build is ane-lgrp2 and i cant change it to ane-lx1 and that means that I can't downgrade it to oreo
Is there any way to change it?
erpl said:
Hi after long time when i repaired my phone i saw that my build is ane-lgrp2 and i cant change it to ane-lx1 and that means that I can't downgrade it to oreo
Is there any way to change it?
Click to expand...
Click to collapse
https://forum.xda-developers.com/t/...0-0-046-070f-emui-8-0-0.4324543/post-85538623
-Alf- said:
https://forum.xda-developers.com/t/...0-0-046-070f-emui-8-0-0.4324543/post-85538623
Click to expand...
Click to collapse
before you posted it i tried flashing it throught twrp and now i have black screen in fastboot mode
erpl said:
tried flashing it throught twrp
Click to expand...
Click to collapse
and what have you tried to flash ?
-Alf- said:
and what have you tried to flash ?
Click to expand...
Click to collapse
the emui 8 for this phone ane-lx1 https://androidhost.ru/5O5 after it finished i wiped cache and rebooted and now i have bricked phone
erpl said:
the emui 8 for this phone ane-lx1 https://androidhost.ru/5O5 after it finished i wiped cache and rebooted and now i have bricked phone
Click to expand...
Click to collapse
You can only install Service ROM using the dload method.
In addition, you tried to downgrade by installing a service ROM, which is highly discouraged!
If the computer recognizes the phone as USB SER, test point & board software must be used (or DC-phoenix ).
-Alf- said:
You can only install Service ROM using the dload method.
In addition, you tried to downgrade by installing a service ROM, which is highly discouraged!
If the computer recognizes the phone as USB SER, test point & board software must be used (or DC-phoenix ).
Click to expand...
Click to collapse
I think i will stop using Huawei phones because of hard repairs and mods i will buy new phone tomorrow because i don't want to rescue it anymore it's been nice 4 years with this phone 🫡