Related
Hello.
I updated my phone from Android 5.0 to 6.0 through the EMUI update. It downloaded succesfully, and when I pressed install, it went into TWRP recovery and started installing it. It had some unknown command-errors, but after a while the installing was ready and the phone turned off automatically.
Now, when I try to turn my phone on, it doesn't do anything. I holded down the power on button for about 15 seconds, and it vibrated but nothing happened.
Any solution for this, please?
Jonni1 said:
Hello.
I updated my phone from Android 5.0 to 6.0 through the EMUI update. It downloaded succesfully, and when I pressed install, it went into TWRP recovery and started installing it. It had some unknown command-errors, but after a while the installing was ready and the phone turned off automatically.
Now, when I try to turn my phone on, it doesn't do anything. I holded down the power on button for about 15 seconds, and it vibrated but nothing happened.
Any solution for this, please?
Click to expand...
Click to collapse
I don't think you can make an official update with TWRP :\ If you want to update your device with the official built-in updater, you must get rid of TWRP and install back the EMUI recovery. Try flashing an official Firmware with Huawei extractor + adb flash. You czn find a lot of people talking about it around here.
Sideness said:
I don't think you can make an official update with TWRP :\ If you want to update your device with the official built-in updater, you must get rid of TWRP and install back the EMUI recovery. Try flashing an official Firmware with Huawei extractor + adb flash. You czn find a lot of people talking about it around here.
Click to expand...
Click to collapse
Okay, found Honor 7 firmwares here http://forum.xda-developers.com/honor-7/general/plk-l01-firmwares-updates-official-beta-t3272205
Should I install the 5.0 firmware, the rollback from 6.0 to 5.0 firmware, or the 6.0 firmware?
Jonni1 said:
Okay, found Honor 7 firmwares here http://forum.xda-developers.com/honor-7/general/plk-l01-firmwares-updates-official-beta-t3272205
Should I install the 5.0 firmware, the rollback from 6.0 to 5.0 firmware, or the 6.0 firmware?
Click to expand...
Click to collapse
Well, there's no way to know if your firmware flash was successful or not. I suggest you try with 5.0, if it doesn't work try 6.0. You can try downgrade package in last resort.
The computer is not detecting the phone with adb. adb devices = nothing. I have the correct drivers.
I think the problem might be that USB debugging is turned off in my phone...anyway to flash a firmware now?
Can anyone help me? I only need the answer if it is fixable or not..
same problem help
Okay, I tried to flash a firmware trough the sd card with the dload...nothing happens...
Is my device fully bricked...?
Oh, now I get it. I need to flash an .IMG file. But can I do that with USB debugging disabled..?
Can ANYONE help me? I am really, really sad if my phone is unusable..
Jonni1 said:
Oh, now I get it. I need to flash an .IMG file. But can I do that with USB debugging disabled..?
Can ANYONE help me? I am really, really sad if my phone is unusable..
Click to expand...
Click to collapse
Flash it in bootloader. No need USB debugging on.
Sent from PLK-TL01H
Lucki_X said:
Flash it in bootloader. No need USB debugging on.
Sent from PLK-TL01H
Click to expand...
Click to collapse
How do I do that or can I even do that when the phone is only black...?
Jonni1 said:
How do I do that or can I even do that when the phone is only black...?
Click to expand...
Click to collapse
Phone must be connected to PC, reboot with push and keep power button + volume down. You must be unlocked to flash via fastboot.
Sent from PLK-TL01H
Lucki_X said:
Phone must be connected to PC, reboot with push and keep power button + volume down. You must be unlocked to flash via fastboot.
Sent from PLK-TL01H
Click to expand...
Click to collapse
Nope. Fastboot is not detecting the phone.
Jonni1 said:
Nope. Fastboot is not detecting the phone.
Click to expand...
Click to collapse
I suppose that you have the right drivers installed in your PC for Honor. I'm sorry I can't provide more advice.
Sent from PLK-TL01H
Good day everyone. I am hoping I can get some help here on a problem that has been bothering me for weeks. I have the KIW-L21 phone, and I recently did an OTA update on the phone, but it got stuck on Honor when booting and never went past it. No matter what I did, it won't move and factory reset failed. So, I went to Honor support website and downloaded the "Update.app" files for UK, France, and Europe General for it. So, far when I flash the UK and General Europe, it goes well, but then I get this screen (image attached) and it keep looping on optimizing Device from 0 to 100 and again. http://i66.tinypic.com/o586d1.jpg
http://i64.tinypic.com/34z0jdi.jpg
http://i66.tinypic.com/igewk2.jpg
The French Update.app won't even work. But I am stuck here. These are all official ROMs from Huawei's website. I wonder what am doing wrong.
Please any sort of help is appreciated.
Thanks.
Is your phone still under warranty?
I am afraid Not
chrisleLP said:
Is your phone still under warranty?
Click to expand...
Click to collapse
I am afraid Not. Are you saying there is no hope for it?
I have read where someone had the same issue, but it still booted up fine, but just always showed the screen first. I was hoping this would be the case.
Damionix said:
I am afraid Not. Are you saying there is no hope for it?
I have read where someone had the same issue, but it still booted up fine, but just always showed the screen first. I was hoping this would be the case.
Click to expand...
Click to collapse
Cheer up. I'm not saying that. Can you boot to erecovery?
Yes
chrisleLP said:
Cheer up. I'm not saying that. Can you boot to erecovery?
Click to expand...
Click to collapse
I can boot into Factory Recovery. The Phone has never been rooted or messed with. Everything is still stock.
Damionix said:
I can boot into Factory Recovery. The Phone has never been rooted or messed with. Everything is still stock.
Click to expand...
Click to collapse
Did you download correct firmware according to your build number...?
I believe I did
hassanjavaid8181 said:
Did you download correct firmware according to your build number...?
Click to expand...
Click to collapse
I believe I did, but just to be on the safe side, I will tell you what I did. I looked on the back of the Phone, as I am unable to back into the Phone, and saw KIW-L21, and just before that it said QISKIW-L21.
Damionix said:
I can boot into Factory Recovery. The Phone has never been rooted or messed with. Everything is still stock.
Click to expand...
Click to collapse
Erecovery is the secondary recovery. There is an option there that will download and flash the latest available firmware. If after reflashing again, the problem still exist. I'm afraid yhis might be a hardware problem.
Damionix said:
I believe I did, but just to be on the safe side, I will tell you what I did. I looked on the back of the Phone, as I am unable to back into the Phone, and saw KIW-L21, and just before that it said QISKIW-L21.
Click to expand...
Click to collapse
No build number will be visible in settings/about..or on the box of the phone
Kiw-l21 has 2 version
Kiw-l21c185 middle east variant
Kiw-l21c432
Which one is yours?
What number firmware you were on before your issue??
This One
hassanjavaid8181 said:
No build number will be visible in settings/about..or on the box of the phone
Kiw-l21 has 2 version
Kiw-l21c185 middle east variant
Kiw-l21c432
Which one is yours?
What number firmware you were on before your issue??
Click to expand...
Click to collapse
DC - Unlocker 2 Client 1.00.1381
Detecting phone :
selection :
manufacturer - Huawei phones
model - Huawei phone in fastboot mode
Found Phone : MSM8916 for arm64
Model : Huawei phone in fastboot mode
Firmware : KIW-L21C432B140
NULL
FB LockState: LOCKED
widevine LockState: LOCKED
Bootloader Lock State: LOCKED
Root State: UNROOT
Bootloader WidevineKey: WidevineKey_NOTSET
System State: OK
Bootloader Version: 001.001.000
Battery state: battery is present
That is what I get from DC-Unlock Software
Damionix said:
DC - Unlocker 2 Client 1.00.1381
Detecting phone :
selection :
manufacturer - Huawei phones
model - Huawei phone in fastboot mode
Found Phone : MSM8916 for arm64
Model : Huawei phone in fastboot mode
Firmware : KIW-L21C432B140
NULL
FB LockState: LOCKED
widevine LockState: LOCKED
Bootloader Lock State: LOCKED
Root State: UNROOT
Bootloader WidevineKey: WidevineKey_NOTSET
System State: OK
Bootloader Version: 001.001.000
Battery state: battery is present
That is what I get from DC-Unlock Software
Click to expand...
Click to collapse
May be this firmware can help you..
http://huawei-firmware.com/rom/huawei-honor-5x/kiwl21/1298
hassanjavaid8181 said:
May be this firmware can help you..
http://huawei-firmware.com/rom/huawei-honor-5x/kiwl21/1298
Click to expand...
Click to collapse
Thank You very much. I will give it a try and let you know how it goes. I appreciate all the help.
Same Thing
hassanjavaid8181 said:
May be this firmware can help you..
http://huawei-firmware.com/rom/huawei-honor-5x/kiwl21/1298
Click to expand...
Click to collapse
Good Morning. I tried that and it didn't work either
Same thing. It flashes fine, then colored screen, and it gets stuck on Honor Splash Screen.
ERecovery
chrisleLP said:
Erecovery is the secondary recovery. There is an option there that will download and flash the latest available firmware. If after reflashing again, the problem still exist. I'm afraid yhis might be a hardware problem.
Click to expand...
Click to collapse
Could you please walk me through this erecovery process?
Damionix said:
Could you please walk me through this erecovery process?
Click to expand...
Click to collapse
Plug in your phone and boot to fastboot. In the console, type:
Code:
adb reboot recovery2
After that, select the first option.
Issue Resolved
I was able to use DC-Phoenix to flash a Factory Firmware, did an Upgrade Flash, and repair IMEI. I am now good to go. Thanks guys for all your input. I really appreciate it.
Damionix said:
I was able to use DC-Phoenix to flash a Factory Firmware, did an Upgrade Flash, and repair IMEI. I am now good to go. Thanks guys for all your input. I really appreciate it.
Click to expand...
Click to collapse
Glad you fixed your device..
Damionix said:
I was able to use DC-Phoenix to flash a Factory Firmware, did an Upgrade Flash, and repair IMEI. I am now good to go. Thanks guys for all your input. I really appreciate it.
Click to expand...
Click to collapse
Wow. Happy for you.
i have same problem here,flash firmwares in fastboot and in upgrade mode but no lucky,can you help me
have also problem in honor 5x kiw-l22 after flash i got multi colour but i can flash it through sd and fastboot mod on fastboot flash falid after that i connect on chimra tool i am getting model kiw-al10
Hi Guys. My HV10 was on on EMUI 9. I tried downgrading to EMUI 8 using HuRupdater but it won't boot now and is not responding to charger getting plugged in or out. I tried plugging it in on my pc and a dialog box opened saying "Configuring USB SER for use" then nothing. It's not showing up as adb and fastboot device. Kindly help.
HiteshK5 said:
Hi Guys. My HV10 was on on EMUI 9. I tried downgrading to EMUI 8 using HuRupdater but it won't boot now and is not responding to charger getting plugged in or out. I tried plugging it in on my pc and a dialog box opened saying "Configuring USB SER for use" then nothing. It's not showing up as adb and fastboot device. Kindly help.
Click to expand...
Click to collapse
You should be able to restore from a backup using Hisuite. There is a system recovery option also.
Sent from my BKL-L09 using Tapatalk
uncleabubear said:
You should be able to restore from a backup using Hisuite. There is a system recovery option also.
Sent from my BKL-L09 using Tapatalk
Click to expand...
Click to collapse
It's telling me to boot to fastboot which I'm unable too.
Update:- I think it's in testpoint mode. I don't exactly know what it is and how to exit it.
HiteshK5 said:
Update:- I think it's in testpoint mode. I don't exactly know what it is and how to exit it.
Click to expand...
Click to collapse
You need use DC unlocked to unbrick it. But you might need to open your device.
miststudent2011 said:
You need use DC unlocked to unbrick it. But you might need to open your device.
Click to expand...
Click to collapse
It's not on the supported devices list. Should i continue?
Delete
HiteshK5 said:
It's not on the supported devices list. Should i continue?
Click to expand...
Click to collapse
Check mate 10 and 20 forums there are guides to solve your problem.
Hisuite won't work as it's hard bricked.
Btw which emui 8 version build did you flash ?
What is its xloader version?
What build are you before using this method?
miststudent2011 said:
Check mate 10 and 20 forums there are guides to solve your problem.
Hisuite won't work as it's hard bricked.
Click to expand...
Click to collapse
It would be very kind of you if you can share the link.
miststudent2011 said:
Btw which emui 8 version build did you flash ?
What is its xloader version?
What build are you before using this method?
Click to expand...
Click to collapse
I was on EMUI 9.0.0.190 (not sure if this was the exact one, it was the latest version as far as I know)and tried to downgrade to EMUI 8.0.0.171. Dunno the xloader version.
Also I borrowed my friend's DC Phoenix account and was following it's guide. Does anyone know which board this phone has so that I can download it's software.
HiteshK5 said:
It would be very kind of you if you can share the link.
I was on EMUI 9.0.0.190 (not sure if this was the exact one, it was the latest version as far as I know)and tried to downgrade to EMUI 8.0.0.171. Dunno the xloader version.
Also I borrowed my friend's DC Phoenix account and was following it's guide. Does anyone know which board this phone has so that I can download it's software.
Click to expand...
Click to collapse
Where are you from?
From India ?
If yes just go to service center they will solve the issue.
I am on mobile cant Give you the link right now.
If you go to my profile you can find a thread by me in Honor 10 forums about hard brick info there you can find the link to mate 10 forums.
miststudent2011 said:
Where are you from?
From India ?
If yes just go to service center they will solve the issue.
I am on mobile cant Give you the link right now.
If you go to my profile you can find a thread by me in Honor 10 forums about hard brick info there you can find the link to mate 10 forums.
Click to expand...
Click to collapse
Yep, from india. Trying to avoid going to the service centre as it's like 25km away from my house
Will check the forums.
Any idea about the board which this phone has. Want to try DC Phoenix
HiteshK5 said:
Any idea about the board which this phone has. Want to try DC Phoenix
Click to expand...
Click to collapse
-open up device
-install com1.0 drivers
-touch testpoint
-flash a working bootloader via DC-Phoenix BUT UNCHECK 'FLASH OEMINFO' ; when you are back in fastboot mode :
-DON'T USE a BoardSoftware file.
-just flash your B190's update.app with DC-Phoenix
oslo83 said:
-open up device
-install com1.0 drivers
-touch testpoint
-flash a working bootloader via DC-Phoenix BUT UNCHECK 'FLASH OEMINFO' ; when you are back in fastboot mode :
-DON'T USE a BoardSoftware file.
-just flash your B190's update.app with DC-Phoenix
Click to expand...
Click to collapse
It's already coming as COM 1.0 in device manager. Trying to flash update.app (only fastboot part) but it shows no device detected to upgrade. Had downloaded a board software and clicked update button. I clicked update button and it detected the device but showed that I don't have enough credits.
oslo83 said:
-open up device
-install com1.0 drivers
-touch testpoint
-flash a working bootloader via DC-Phoenix BUT UNCHECK 'FLASH OEMINFO' ; when you are back in fastboot mode :
-DON'T USE a BoardSoftware file.
-just flash your B190's update.app with DC-Phoenix
Click to expand...
Click to collapse
What are exact testpoints for V10? since there is no officially images with testpoints for V10.
It's available inside DC-Phoenix apps...
I don't have the tools to open the phone. Maybe l will need to go to a service centre on Monday. If possible please try to help in fixing this phone.
oslo83 said:
It's available inside DC-Phoenix apps...
Click to expand...
Click to collapse
Not for view10
Hi i have same problem my V10 is Brick Not ON, nOT go in Fastboot mode my Model is BKL-L09 i have downloaded DC-Phoneix in possible repair?
LTE
Sent from my Vfone 6++ using Tapatalk
hi had the mate 10 root with the, fastboot flash recovery_ramdisk recovery_ramdisk.img
I'm trying to close the bootloader and throw this at me:
the version that I have is ALP-LGRP2-OVS 9.0.0228 of the FirmwareFinder I have lowered the vesion and I have removed the update.app, I have removed the system.img, I have put it by fastboot, and it keeps me throwing the same error.
I have also tried the dload method.
putting in the folder only the:
UPDATE.APP
and putting both
UPDATE.APP
update_full_base.zip
It gives me the same error.
any ideas?
bloudin said:
hi had the mate 10 root with the, fastboot flash recovery_ramdisk recovery_ramdisk.img
I'm trying to close the bootloader and throw this at me:
the version that I have is ALP-LGRP2-OVS 9.0.0228 of the FirmwareFinder I have lowered the vesion and I have removed the update.app, I have removed the system.img, I have put it by fastboot, and it keeps me throwing the same error.
I have also tried the dload method.
putting in the folder only the:
UPDATE.APP
and putting both
UPDATE.APP
update_full_base.zip
It gives me the same error.
any ideas?
Click to expand...
Click to collapse
You cannot lock the bootloader with TWRP and root installed and still access the system .
If You want lock bootloader (not re-lock) , You have to flash Service ROM from dload (this process will erase all the data from your device!).
bozka1 said:
You cannot lock the bootloader with TWRP and root installed and still access the system .
If You want lock bootloader (not re-lock) , You have to flash Service ROM from dload (this process will erase all the data from your device!).
Click to expand...
Click to collapse
but what low version? and what do I put in the dload folder? thanks for answering
bloudin said:
but what low version? and what do I put in the dload folder? thanks for answering
Click to expand...
Click to collapse
What's your currently build number ?
bozka1 said:
What's your currently build number ?
Click to expand...
Click to collapse
ALP-LGRP2-OVS 9.0.0228, above I explain that I have this version, have you read what I have posted?
bloudin said:
have you read what I have posted?
Click to expand...
Click to collapse
Of course, unfortunately this is wrong build number, build number must take the form e.g. 9.0.0.226(C636E2R1P12) . Cxxx is very important, Cxxx = Region/Operator. Without number of your region I can't find Service ROM for your phone, mister.
bozka1 said:
Of course, unfortunately this is wrong build number, build number must take the form e.g. 9.0.0.226(C636E2R1P12) . Cxxx is very important, Cxxx = Region/Operator. Without number of your region I can't find Service ROM for your phone, mister.
Click to expand...
Click to collapse
this, thank you very much
bloudin said:
this, thank you very much
Click to expand...
Click to collapse
Bad news - there is no Service ROM for your region (C636) , sorry...
bozka1 said:
Bad news - there is no Service ROM for your region (C636) , sorry...
Click to expand...
Click to collapse
Is there any way to download Oreo from where I am now?
bloudin said:
Is there any way to download Oreo from where I am now?
Click to expand...
Click to collapse
Try downgrade to Oreo via HiSuite.
bloudin said:
Is there any way to download Oreo from where I am now?
Click to expand...
Click to collapse
You can try HiSuite to downgrade to 8.0.
bozka1 said:
Try downgrade to Oreo via HiSuite.
Click to expand...
Click to collapse
the process ends, but on the mobile I get an error, I get the circle with the red exclamation
bloudin said:
the process ends, but on the mobile I get an error, I get the circle with the red exclamation
Click to expand...
Click to collapse
IMHO this is why you get it :
"the version that I have is ALP-LGRP2-OVS 9.0.0228 of the FirmwareFinder I have lowered the vesion and I have removed the update.app, I have removed the system.img, I have put it by fastboot, and it keeps me throwing the same error."
ALP-LGRP2-OVS 9.0.0228 is incompatible with your region.
I can't help you more, sorry.
My Device was on firmware version RMX2202_11.C.15 GDPR, it wasnt the latest one and software update wasn't pushing the latest ota package for my device which is RMX2202_11.C.25 GDPR.
So, i decided to rollback to RUI2.0 and update again and that might solve the problem. i unlocked my bootloader, booted on twrp, flashed rollback "RMX2202_11.A.17 GDPR" package, wipe data, boot into system.
All good till now, software update pushed me 700MB ota package, i download and installed it. Device asks for reboot i rebooted my device , device went off. DEAD no sign of life. only EDL MODE.
no recovery, no bootloader, no vibrate , no bootloop , completely DEAD. Then i took it to realme service center, they tried to flash my device , they got some error they returned my phone and said we cant repair because your device is rejecting firmware.
i attached the msm tool error. (WCSM communication failed (WCSM code: 4009 SW version of this package is not found in WCSM.)
PLEASE HELP ME!
Try to Change A computer?
DestoryG said:
Try to Change A computer?
Click to expand...
Click to collapse
i tried from different computers. 4 5 may be
Can i try with your phone ?
xuanhoang1811 said:
Can i try with your phone ?
Click to expand...
Click to collapse
Thanks for your reply.
I fixed my phone with the help of some technician online, he successfully flashed c.15 firmware using oplus flash tool v4.1.0.
Thank god and thanks to technician, my phone came back to life again.
But still my phone's software update is not pushing ota package. If you have solution please suggest me.
XxMinixX said:
View attachment 5766719
Click to expand...
Click to collapse
Mine still stuck at 11.c.05 i use this phone for about 3 months but still no updates
XxMinixX said:
Mine still stuck at 11.c.05 i use this phone for about 3 months but still no updates
Click to expand...
Click to collapse
i am able to update my phone to the latest ota. i can help you if you want
Ashim Adhikari said:
Thanks for your reply.
I fixed my phone with the help of some technician online, he successfully flashed c.15 firmware using oplus flash tool v4.1.0.
Thank god and thanks to technician, my phone came back to life again.
But still my phone's software update is not pushing ota package. If you have solution please suggest me.
Click to expand...
Click to collapse
Can you recommend me your technician? My GT is stuck in boot loop. Technician here says it has no recovery or something similar, and is still waiting for a recovery file for GT for it to be fixed. Thanks!
vlmapalo said:
Can you recommend me your technician? My GT is stuck in boot loop. Technician here says it has no recovery or something similar, and is still waiting for a recovery file for GT for it to be fixed. Thanks!
Click to expand...
Click to collapse
his website is MOD EDIT: URL REMOVED | READ AND FOLLOW XDA FORUM RULES
Ashim Adhikari said:
his website is https://www.kreatifintech.com/
Click to expand...
Click to collapse
paid service advertising, you have been reported
Ashim Adhikari said:
his website is MOD EDIT: URL REMOVED | READ AND FOLLOW XDA FORUM RULES
Click to expand...
Click to collapse
All this thread maked for advertise some indian guys)))