First of all i would like to thank all you chef's for the great menu you provide
Tastes are incredibly smooth and you use fresh ingredients all the time
What else could i ask?
On the second thought i can ask something
I have become irritating asking the same question in differnet roms
Maybe it is a problem in my touch pro
Why does my clock lose synchronisation?
One moment all ok and suddenly time stays stuck...
I repair it and all is good again
But suddenly this happens again
An one more thing
In some roms while i use gmt+2 athens it changes it by itself in [email protected]@#@ something i cannot remember
Thank you for the time you took reading it and for the time you take making these great roms
p.s
Maybe there are more with the same problem
If there are please state it to see that i am not alone in this cruel world
Me too
I am also facing the same issue nowadays. I am using RRE23016v3Manila ROM version. This is a new issue i got after flashing this.
wrong clock too
I have the same problem too with the clock..and all the appointments'time becoming error too..
This issue is solved in Manila 2.1. You can also fix it with this.
Ok with time zone
But i do not lose 1 hour
I lose 20 minutes for example
it is not a timezone problem
I saw this answered by deksels in another thread. Here is deksels answer:
Originally Posted by deksels View Post
Please take a look at Start --> Settings --> Sounds & Notifications and then under missed calls or text messages you can find flash for ... in time
Clock gets out of sync
Like others here, I face the same problem. At a certain moment I will loose sync of time. The amount the clock is off varies per event.
It is not a DST issue, but something else.
It seems that it occurs randomly, but mostly after an event (alarm or reminder) occured.
Any one any suggestion what is happening here?
Although it is claimed that the issue has been solved with Manila 2.1, it is still occurring sporadically. The only way to fix it is to set the clock right in Settings -> Clock & Alarms. Just do not touch the big clock in TF3D ;-)
Cheers...
and when i touch it when i talk on phone???
lol that's what i thought it was the problem
Wrong clock
i also experienced the same problem...it's not about timezone or manila.i use energy rom 3.0...it's so irritating when you realize you are late for something important as the clock stuck at certain time..maybe i should buy a watch someday
baang43 said:
i also experienced the same problem...it's not about timezone or manila.i use energy rom 3.0...it's so irritating when you realize you are late for something important as the clock stuck at certain time..maybe i should buy a watch someday
Click to expand...
Click to collapse
I'm having a similar issue and it's using 6.5 without Manila. The clock appears to stick and when I "tab" the power button to turn on the display, only then does it suddenly try to update the time on the display and it usually 1 - 2 minutes behind or forward on the Titantium/CHome Clock app than the "Top Bar" clock. This also causes issues when an alarm is set and goes off. Dismissing the alarm will sometimes cause the time to suddenly reverse one minute so the next minute, the alarm sounds again. This morning, it looped 3 times!
Hello,
Firstly i want to apologize you for mistakes in my English (the original post is correct in Polish – I created this topic on other polish forum and I did not get answers. I hope that someone will help me )
I have a problem with an inoperative back camera phone brand lg. Recently assumed the new digitizer (after replacement experiencing this problem). After work I noticed the camera does not work.
The following is a screenshot of how to behave camera system after it starts. At the beginning it is a black background, and the available options (possibility to change the image size etc.). After a while of inactivity (approx. 30 seconds), the screen changes color to green. I think the better of these situations presents screenshots.
Screenshots I can send to private message
Hi Guys,
Anyone have any idea for it?
Up
Yes please
This
https://forum.xda-developers.com/showpost.php?p=76610100&postcount=2
This seems like a really basic requirement. Why doesn't the watch light up when you receive an e-mail etc? Might be wrong but I thought the BIp did.
I may be wrong but.
I think my watchdroid set up does that for me. I have it set (I forget the watchdroid setting) so that watchdroid actives when the watch does. So when I get a notification and I look at the watch, I see watchdroid formatted message and I am pretty sure the backlight is on (I say this with a tiny bit of hesitation since most of the time I get notifications I am outside or in a very bright office)
huge disappointment, Bip have it and Stratos 2 don´t. This is very very important function for notification...
Can't seem to grab the changelog to paste here but it looks like a good update!
Srem said:
Can't seem to grab the changelog to paste here but it looks like a good update!
Click to expand...
Click to collapse
Yep
Here too
Sent from my TA-1004 using Tapatalk
I could get only so much in my long shot.
I have a screen shot. But unable to share here.
Here's the changelog:
Amazfit OS update log
Version: 2.8.4.0
- Added German Translation
- Added news notification support for Korean and Thai
- Added "Sports Reminder"
a. sports start reminder: automatically recognize the running and walking mode after opening, will remind start of the corresponding sports mode after 5 minutes of exercise, and save the official data before;
b. End of motion reminder: automatically recognizes the end state of running and walking after opening, reminds the end and automatically suspends the movement after 10 minutes of exercise
- Added music playback control function during sports (the watch will display the control screen on the last screen after the music is played)
- Added "3 data big characters" mode for sports interface
- Update GPS firmware for more stable location service
- Update indoor running algorithm
- Update heart rate algorithm to improve the stability of heart rate measurement
- Optimize connection stability for iOS devices
- Optimize emoji emoticons (temporarily does not support non-standard emoji emoticons)
- Optimized motion record, slope distribution data display
- Optimized GPS signal may be missing when the GPS signal is not good
- Optimize possible power consumption in some watches
- Optimize initial altitude data inaccuracy
- Fixed problem with continuation of motion pause and trajectory drawing error
- Repairing abnormal mileage in some areas
- Fixed speed and speed anomaly due to GPS loss
- Fixed partial altitude data showing inconsistencies in watches and apps
- Repair outdoor cycling/skiing/indoor running, automatic suspension, continuous vibration bug
- Fixed some bugs in speed data and improved real-time speed stability
- Bug fixes
My Timeline Widget won't work after the update
Always on display not working anymore.
To bad. How to downgrade?
Error again
2.8.4 update make an error again and again, even factory reset, anyone else to help this problem?
ds1rbi said:
2.8.4 update make an error again and again, even factory reset, anyone else to help this problem?
Click to expand...
Click to collapse
I got an answer I think
https://forum.xda-developers.com/smartwatch/amazfit/fw-tool-stock-firmware-installers-2017-t3725494
Melhiat said:
Always on display not working anymore.
To bad. How to downgrade?
Click to expand...
Click to collapse
Huh? Pace always have AlwaysOnDisplay, what are you taking about? If you get a black screen while screen is locked and you are using a custom APK watchface then you need to uninstall the current version, restart the device and seek for a new version that also works with Stratos firmware 2.3.7.0+, older APKs don't work anymore....
Calories are now much more accurate on my cycle
lfom said:
Huh? Pace always have AlwaysOnDisplay, what are you taking about? If you get a black screen while screen is locked and you are using a custom APK watchface then you need to uninstall the current version, restart the device and seek for a new version that also works with Stratos firmware 2.2.7.0+, older APKs don't work anymore....
Click to expand...
Click to collapse
Noticed that afterwards. Thanks for info anyway.
kedlub said:
Here's the changelog:
Amazfit OS update log
Version: 2.8.4.0
- Added "Sports Reminder"
a. sports start reminder: automatically recognize the running and walking mode after opening, will remind start of the corresponding sports mode after 5 minutes of exercise, and save the official data before;
b. End of motion reminder: automatically recognizes the end state of running and walking after opening, reminds the end and automatically suspends the movement after 10 minutes of exercise
Click to expand...
Click to collapse
I think some of them exists in older roms already. ?
How do you disable the sport autostart ? Every time, as I am returning from walking the dog, I get a message saying I have started a walk - about 30 mins after it started
From some other thread:
lfom said:
Latest firmwares for all watches (Pace/Stratos/Verge) introduced "Activity reminders" (also called Sports reminders on Verge) that are supposed to auto-start and auto-stop recording activities, but they have a bug (besides the fact that I don't think they actually work as of now): even if both are disabled by default you must enable and then disable both options in watch Settings -> General or your activity most probably will miss the first initial and final minutes of GPS data. Simply enable both, quit settings then go back and disable them again and it should be fine.
Click to expand...
Click to collapse
Finally, Thai language support, but it renders text incorrectly in standby screen as it doesn't render upper and lower character, for example, words like "หู้" will be rendered as "ห" in standby screen, but it will be rendered correctly in active screen. Also, its Thai font is too wide.
Do you think that this update is useful?
gps not working
gps is not working after the update for me, did a factory reset but still not working
Apk watchfaces not working correctly with this new rom.
When the watch goes to sleep after x second timeout the screen either goes black or out showes previous wfz watch face or showes correct apk watchface but very grainy.
Srem said:
Calories are now much more accurate on my cycle
Click to expand...
Click to collapse
Same with my elliptic. Went from around 100-130 for an intensive 30-min session to around 420-440, about the same as what the machine actually gives.
yaronkle said:
Apk watchfaces not working correctly with this new rom.
When the watch goes to sleep after x second timeout the screen either goes black or out showes previous wfz watch face or showes correct apk watchface but very grainy.
Click to expand...
Click to collapse
Old APK watchfaces should be updated to work with newer firmware (for both Pace and Stratos), check if the developer released a new version.
Hi,
Today i just update new firmware 1.3.6.07 for amazfit GTR.
i not sure what is improvent because it only write bug improvement.
After update , i found more bug happen. Now my compass cannot use / calibrate.
and battery? Mine was before 20+ days with 1.3.6.05 i have only 8 days and almost all off!!!!
I just got my GTR today and it updated to 1.3.6.0.5. For me I noticed turning on the flashlight for a brief test causes my auto brightness to go the max setting. It’s stuck at max brightness all of the time. Rebooting gets it back to normal.