Related
Process and info are updated.
apks updated to the last one
S7-701u and S7-702u these two models are exactly the same in terms of hardware, The only difference is that one comes with a clean firmware huawei (701u) and the other comes with bloatware and market operators logo (702u)
Firmware: The s7-701u firmware can be downloaded from huawei website here (617mb) but the s7-702u firmware is privative, and can't be obtained for free... Some pages offer it for money ( for example AssanFile )
A friend from Panama with a s7-702u paid for his operator firmware and share it to me here (617mb) but it comming with some panama operator bloatware and logos.
Note: inside the zip file is a pdf with install instructions, both firmwares are Simcard Unlocked
A )But, what if you want your s7-702u with a fresh and original huawei firmware without bloatware and with original Huawei logos? then you must install the s7-701u firmware inside your s7-702u:
0) Download the s7-701u firmare
1) The tablet need to be rooted
1.1) Install BusyBox
2) Download from attachments this app (English and Spanish) VRCB Changer to patch your tablet id from 702u to 701u. ( Grant root access to the app).
3) unzip you firmware and copy the dload folder to the root of your microsd. (See attached pdf guide )
4) Reboot your tablet and s7-701u firmware will install a fresh and wiped android without bloatware and with original huawei logos (You must backup your data before this)
B) Huawei Tablet S7-701u/s7-702u Hard Reset Guide
1. Press and hold the power button + volume up + volume down.
2. When you feel the vibration,release the power button.
3. When the Android logo appears, release the volume up.
4. You will see some running lines in the Android logo, hold still the volume down and wait for 10 seconds then release it.
5. Then let it reboot by itself.
6. Hard reseting done.
I hope this could help anybody who need this information.
Process and info are updated.
apks updated to the last one
@puntoazul
any further progress for this device regarding custom recovery.?
Thanks.
vwong said:
@puntoazul
any further progress for this device regarding custom recovery.?
Thanks.
Click to expand...
Click to collapse
No :crying:
puntoazul said:
No :crying:
Click to expand...
Click to collapse
Good News!!!!
at 22 July 2015 Huawei was released the kernel source code for the s7-701u... This means that we could being to make or customs roms.
Kernel Source here
This is a good news
Huawei released the s7-701u (Media Pad Youth) kernel source code. This mean that developers can make custom roms
download here
I need help with my device huawei media pad 7 (s7-702u) i tried with the info above but my recovery it's work, went it reboot it close when the logo appear and when a put out the sd card it continues normal
HernG said:
I need help with my device huawei media pad 7 (s7-702u) i tried with the info above but my recovery it's work, went it reboot it close when the logo appear and when a put out the sd card it continues normal
Click to expand...
Click to collapse
is your s7-702u rooted, and have busybox installed and configured?
did you install VRCB_en.apk, and granted root acces?
puntoazul said:
is your s7-702u rooted, and have busybox installed and configured?
did you install VRCB_en.apk, and granted root acces?
Click to expand...
Click to collapse
Is there a firmware for S7-701wa that I can download for free?
Please help
puntoazul said:
This is a good news
Huawei released the s7-701u (Media Pad Youth) kernel source code. This mean that developers can make custom roms
download here
Click to expand...
Click to collapse
Are you still on the way things are still things as either still to come I can not install any ROM for this device (MEDIAPAD 7 YOUTH S7-701U)
Is not there any new terms of this device has become a very bad experience and very slow, and many suffered from cramps and even I do not know how to delete programs involving Huawei that maybe if you delete it becomes a little faster
Please help this device has become very slow Is there a way to make it even a little bit faster
firmware need s7-701u rockchip tool flashable ...
firmware need s7-701u rockchip tool flashable ...
find on a paid website named as update.img if anyone have it than upload it plz
Do you still have the original firmware? I have a bricked s7-702u that won't take the 701 firmware and since it is bricked I can't root it. I would really appreciate it if you could proide me a link with the firmware
i have s7-701u . There are virus . Whether it will remain after the upgrade?
I want to upgrade my mediapad youth s7-701u....please upload ROM
How fix bootloop and how install stock recovery?. I can´t enter into recovery and when I try to flash the stock recovery with fastboot it says failed no permission, I think I have bootloader unlocker it says phone unlocked.
puntoazul said:
Process and info are updated.
apks updated to the last one
S7-701u and S7-702u these two models are exactly the same in terms of hardware, The only difference is that one comes with a clean firmware huawei (701u) and the other comes with bloatware and market operators logo (702u)
Firmware: The s7-701u firmware can be downloaded from huawei website here (617mb) but the s7-702u firmware is privative, and can't be obtained for free... Some pages offer it for money ( for example AssanFile )
A friend from Panama with a s7-702u paid for his operator firmware and share it to me here (617mb) but it comming with some panama operator bloatware and logos.
Note: inside the zip file is a pdf with install instructions, both firmwares are Simcard Unlocked
A )But, what if you want your s7-702u with a fresh and original huawei firmware without bloatware and with original Huawei logos? then you must install the s7-701u firmware inside your s7-702u:
0) Download the s7-701u firmare
1) The tablet need to be rooted
1.1) Install BusyBox
2) Download from attachments this app (English and Spanish) VRCB Changer to patch your tablet id from 702u to 701u. ( Grant root access to the app).
3) unzip you firmware and copy the dload folder to the root of your microsd. (See attached pdf guide )
4) Reboot your tablet and s7-701u firmware will install a fresh and wiped android without bloatware and with original huawei logos (You must backup your data before this)
B) Huawei Tablet S7-701u/s7-702u Hard Reset Guide
1. Press and hold the power button + volume up + volume down.
2. When you feel the vibration,release the power button.
3. When the Android logo appears, release the volume up.
4. You will see some running lines in the Android logo, hold still the volume down and wait for 10 seconds then release it.
5. Then let it reboot by itself.
6. Hard reseting done.
I hope this could help anybody who need this information.
Click to expand...
Click to collapse
How did you guys manage to root? Please share the procedure.
I have Huawei Honor T1-701u
dearbasheer said:
How did you guys manage to root? Please share the procedure.
I have Huawei Honor T1-701u
Click to expand...
Click to collapse
you can use vroot or iroot app
MediaPad 7 Youth Kernel
New link: consumer.huawei.com/en/support/tablets/mediapad_7_youth_en-sup.htm
how can i update my android version
I tried to change the Chinese Firmware to Global firmware to (Meizu Pro 7) and now I have a problem.
I followed this guide on this web:
chinahandys .net (I can't copy the link here since I have a new user
and so I deleted the file "boot.img"
I also couldn't open the Update.zip file with Winrar or another archive program.
then, I tried to do this :
"10. In FlashFire, select the small plus icon at the bottom right and select “Flash ZIP or OTA”. Select the “update.zip” file and confirm the pop-up with the tick at the top right"
but I couldn't find the “update.zip” file there.
finally, I tried to open the update.zip by pressing "Update".
since then my phone won't start.
The only thing i can do is pressing the "plus" button and another button below which will lead to me to a screen of Updating the system. when I try to do it's wrong because "firmware not found".
My phone is stock on the screen "flyme".
please help me!! I just bought this phone
(danhdongufixer) he is on Facebook.... He single handily brought my pro 7 plus back from the dead get ahold of him he's wizard .
I had same problem and this guy fixed my phone get in touch with him because there is nothing else you can do meizu left a lot of us hanging for over 3 months and no help . Good luck
You maybe don't use the good Firmware
maorsah said:
I tried to change the Chinese Firmware to Global firmware to (Meizu Pro 7) and now I have a problem.
I followed this guide on this web:
chinahandys .net (I can't copy the link here since I have a new user
and so I deleted the file "boot.img"
I also couldn't open the Update.zip file with Winrar or another archive program.
then, I tried to do this :
"10. In FlashFire, select the small plus icon at the bottom right and select “Flash ZIP or OTA”. Select the “update.zip” file and confirm the pop-up with the tick at the top right"
but I couldn't find the “update.zip” file there.
finally, I tried to open the update.zip by pressing "Update".
since then my phone won't start.
The only thing i can do is pressing the "plus" button and another button below which will lead to me to a screen of Updating the system. when I try to do it's wrong because "firmware not found".
My phone is stock on the screen "flyme".
please help me!! I just bought this phone
Click to expand...
Click to collapse
Hi,
For 3 month, I hope you have find the solution. If you don't, here is mine :
I had the same problème on my phone.
I couldn't reinstall it, I think the version that I downloaded wasn't compatible with the "Chinese" version of my mobile.
You need to find the good firmware !
Could you try with this chinese firmware : MEIZU PRO7 Standard Version -Flyme6.1.3.2A-7.0
It's worked on my phone.
So,
Press and hold the volume up and power button until the screen goes on recovery mode.
Connect the device to the laptop or PC, you can open the device. You will see an empty partition named recovery.
Now copy the downloaded firmware of your phone and place it in the recovery partition. Just copy update.zip to recovery partition.
Now in the phone select update firmware and clear data and press next.
The phone will reboot and install the firmware.
Wait, wait, wait 15mn be patient.
tell me if it's working on your phone.
excuse me for my poor English !
Math32 said:
Hi,
For 3 month, I hope you have find the solution. If you don't, here is mine :
I had the same problème on my phone.
I couldn't reinstall it, I think the version that I downloaded wasn't compatible with the "Chinese" version of my mobile.
You need to find the good firmware !
Could you try with this chinese firmware : MEIZU PRO7 Standard Version -Flyme6.1.3.2A-7.0
It's worked on my phone.
So,Press and hold the volume up and power button until the screen goes on recovery mode.
Connect the device to the laptop or PC, you can open the device. You will see an empty partition named recovery.
Now copy the downloaded firmware of your phone and place it in the recovery partition. Just copy update.zip to recovery partition. Now in the phone select update firmware and clear data and press next.
The phone will reboot and install the firmware.
Wait, wait, wait 15mn be patient.
tell me if it's working on your phone.
Click to expand...
Click to collapse
Hello!
Was everything, such as google playstore and english language, still working on you phone after you updated the firmware?
I was also wondering if theres need to backup the IMEI somewhere?
Im currently running a modified verision of 6.1.3.2A which doesnt have all the features for the 2nd display and hence looking for an upgrade.
Leone1 said:
Hello!
Was everything, such as google playstore and english language, still working on you phone after you updated the firmware?
I was also wondering if theres need to backup the IMEI somewhere?
Im currently running a modified verision of 6.1.3.2A which doesnt have all the features for the 2nd display and hence looking for an upgrade.
Click to expand...
Click to collapse
I used this chinese version less than 10mn. I would advise you to install the G firmware !
I didn't install the playstore (too thing in chinese in this firmware) that's why after running the version 6.1.3.2A, i used this tutorial :
https://forum.xda-developers.com/showpost.php?p=75297402&postcount=70
"Download the firmware Flyme 6.1.3.2G from here
http://www.flymeos.com/firmwarelist?modelId=88&type=1
after you can do the instructions in video
https://www.youtube.com/watch?v=aDp6oZL4Wx4 "
Be careful when you install superSU to do the same thing as in the video. I don't do the same than on the vidéo that's why i need to reinstall the chinese firmware. After the installation i wait 15mn and my phone stays on Flyme. i restart it and it worked for installing busybox and flashfire.
I wish you bon courage !
Math32 said:
I used this chinese version less than 10mn. I would advise you to install the G firmware !
I didn't install the playstore (too thing in chinese in this firmware) that's why after running the version 6.1.3.2A, i used this tutorial :
https://forum.xda-developers.com/showpost.php?p=75297402&postcount=70
"Download the firmware Flyme 6.1.3.2G from here
http://www.flymeos.com/firmwarelist?modelId=88&type=1
after you can do the instructions in video
https://www.youtube.com/watch?v=aDp6oZL4Wx4 "
Be careful when you install superSU to do the same thing as in the video. I don't do the same than on the vidéo that's why i need to reinstall the chinese firmware. After the installation i wait 15mn and my phone stays on Flyme. i restart it and it worked for installing busybox and flashfire.
I wish you bon courage !
Click to expand...
Click to collapse
Ah ok, so you only used it to be able to flash the global rom on?
Ive read multiple places that its not possible to update from A to G, thats why i was thinking about going to the 7.0.0.0A ROM instead. The shop i bought it from (CECT, who are not very well informed at all) told me it would brick the phone to go to G from A, my phone is apparently not intended for global sale thats why they make their own version and flashes it on...
So now im just looking for someone who can confirm that updating to the A-rom wont remove google play or english.
EDIT: I have the Helio P25 model
Hi,
I need to mass update a bunch of P20 Lite, in the fastest and safest way.
I have a slow internet connnection, so updating with OTA or HiSuite/USB is impracticable.
I don't want to root the device.
The method should also be as simple as possible.
Those P20 Lite Dual Sim arrived with firmware 8.0.0.150.
I would like to update them to ANE-LX1C432E5R1P7B132 (9.1.0.132) in just one step.
The OTA update to this version required mutiple steps, and the insertion of a SIM, and the use of HiCare App.
I think a firmware update via SD Card is the best option.
I used Firmware Finder to locate and "CHECK" the FULL firmware. There are multiple valid versions, i tried them all.
The best choice seem this one:
update.dbankcdn.com/TDS/data/files/p3/s15/G3948/g1755/v261081/f1/full/update.zip
I put the unzipped UPDATE.APP (5GB) in /dload folder of an exFAT formatted microSD.
I used stock recovery to apply the update (power on with all buttons pressed for 8 seconds).
The result is always "Software Update Failed" at 5%.
Any suggestion?
Thank you.
androidhost.ru/2AVi
OTA is the most safe way to update, because your device will be update after downloading.
[GUIDE] New method to install Google Mobile Services on Huawei P40 & P40 Lite
Hi guys!!!
I'm thrilled to report that I just found this new way to get Google Mobile Services to work on Huawei and Honor devices that don't have them.
It's totally working [today is 20 june 2020] and it SOLVES the new problem that doesn't let the users sign-in to their Google accounts at the time of the installation.
Everything is very detailed and shown step-by-step on the following video...
Please be sure to download the .zip file that has all the stuff needed to get this to work. Using this method, that zip file must be copied to the root a pen-drive. It's here, for Android 10: https://bit.ly/2ATWPGE
- If the LZ app (big "G" icon") isn't working as expected on your phone, you might have to reset the device.
[UPDATE - 29 / June / 2020]
Important stuff:
- You must have your phone in english in order to proceed with this method.
- After it is complete you can switch back to your preferred language, without problems.
- If you want to add more Google accounts, you should do this procure while you are installing GMS. Use this link: https://youtu.be/jgCN6SeP32c?t=1418 It guides directly to the right moment in that video.
By the way, it's working great for a lot of users. Push notifications, though, aren't working.
Still, I believe this is the best method around.
Cheers!
Any feedback on battery drain once google services are installed?
Asking this because as far as I remember, google services have always been the top consumer in standby on all my phones, and I was happy to get a P40 without GMS, at first, and sadly found out their store is like a no mans' land lol.
I'll probably run without GMS for a while to check how battery drain goes, and see if Huawei is doing a better job If time allows I'll post my findings.
doesnt working Im stuck in the first step, when Im about to restore the backup file...
it just doesnt appear the backup...
has someone with firmware: 10.1.136 successfully installed the services? on the old version it went immediately with 10.1.136 I tried several times now always without success
bj82xx said:
has someone with firmware: 10.1.136 successfully installed the services? on the old version it went immediately with 10.1.136 I tried several times now always without success
Click to expand...
Click to collapse
what error message?
3c said:
Any feedback on battery drain once google services are installed?
Asking this because as far as I remember, google services have always been the top consumer in standby on all my phones, and I was happy to get a P40 without GMS, at first, and sadly found out their store is like a no mans' land lol.
I'll probably run without GMS for a while to check how battery drain goes, and see if Huawei is doing a better job If time allows I'll post my findings.
Click to expand...
Click to collapse
Any feedback?
bj82xx said:
has someone with firmware: 10.1.136 successfully installed the services? on the old version it went immediately with 10.1.136 I tried several times now always without success
Click to expand...
Click to collapse
It is possible to perform a downgrade using HiSuite. I'm considering it myself because i have had no luck installing gms without annoying notifications.
coeptisr said:
Any feedback?
Click to expand...
Click to collapse
So far, I've tested the Huawei P40 Lite E vs Pixel 3 XL, both without SIM card.
P40 achieves an average of 8mA in standby, while Pixel 3 XL is at an average of 10mA. Not much, but still P40 is performing better.
Usage consumption shows very similar drain around 400-500mA, resulting in both devices showing a run time of about 8 hours. However the Pixel 3 XL battery is aging and have a remaining capacity of 3300mAh, compared to the P40 having 4000mAh (will post actual capacity later).
Usage consumption highly depends on screen technology and brightness levels, the later I haven't checked or messed with.
Noticeably the P40 is brand new and have a brand new battery (still trying to get an estimated battery capacity as I forgot to exclude my app from google AND huawei battery optimizations).
I'd say Huawei services are performing better than Google services, by 20%.
I tried to install google service on my P40 Lite E, but couldn't find a valid method. Are there any way to do so these days?
I was hoping to compare battery life on the P40 Lite E with and without Google services, but it seems a no go now.
How to downgrade a P40 Lite? I have managed to download the correct firmware, but how can i get it to flash on the device?
CrisGSM said:
How to downgrade a P40 Lite? I have managed to download the correct firmware, but how can i get it to flash on the device?
Click to expand...
Click to collapse
If you find a way to downgrade firmware, don't forget to post it as I'm sure many may be interested, including me.
you can downgrade easily the ones which don't have the anti-rollback
download firmware, extract the dload folder on some sd card or usb, attach usb otg to the phone and boot with volume up - power. Then select usb update. Worked fine
I do have it for JNY-LX1 if someone needs
bender_007 said:
you can downgrade easily the ones which don't have the anti-rollback
download firmware, extract the dload folder on some sd card or usb, attach usb otg to the phone and boot with volume up - power. Then select usb update. Worked fine
I do have it for JNY-LX1 if someone needs
Click to expand...
Click to collapse
Is this JNY-LX1 for the P40 Lite E? Can GMS be installed on it then? If so, I'm definitely interested as I couldn't find a single firmware for the P40 Lite E.
Only found this version so far, but impossible to download because of quota: Huawei_P40_Lite_E_Arthur-L29_10.1.0.112_C185E2R3P1_EMUI10.1.0_05016MMP_Dload.zip
All sites are referring to the same GDrive file, which can't be downloaded, here is one of them: https://firmwarefile.com/huawei-p40-lite-e-arthur-l29
Can you pm some od the info from your system-about? Current emui etc
Sent from my Pixel 4 using Tapatalk
bender_007 said:
Can you pm some od the info from your system-about? Current emui etc
Sent from my Pixel 4 using Tapatalk
Click to expand...
Click to collapse
I read it's impossible to downgrade from EMUI 10.1 back to 10.0 or 9.x, so there's no way I'll be able to install GMS I suppose. IMO phones without GMS are pretty useless. App Gallery have not half the apps on Play Store.
Here are details of system about, just in case I could get my hand on 9.x or older 10.x firmware to attempt a flash.
Device: HUAWEI P40 lite E
Model: ART-L29
Build: 10.1.0.128(C432E2R1P1)
EMUI: 10.1.0
CrisGSM said:
How to downgrade a P40 Lite? I have managed to download the correct firmware, but how can i get it to flash on the device?
Click to expand...
Click to collapse
you can downgrade directly on HiSuite
Unfortunately, you can't. On the latest version of HiSuite, you don't have the button with the "Older Versions". If you install an older version of HiSuite, you can't connect to the phone. So this method doesn't work at this moment.
CrisGSM said:
Unfortunately, you can't. On the latest version of HiSuite, you don't have the button with the "Older Versions". If you install an older version of HiSuite, you can't connect to the phone. So this method doesn't work at this moment.
Click to expand...
Click to collapse
Obrigado
I did that yesterday. I am on windows 7 with HiSuite updated, not sure if that's relevant.
Maybe it is, i am on windows 10 and it doesn't let me do that. I just bought a USB type-C memory stick and i will try to update from it, holding volume up and power button while powering up the phone.
CrisGSM said:
Unfortunately, you can't. On the latest version of HiSuite, you don't have the button with the "Older Versions". If you install an older version of HiSuite, you can't connect to the phone. So this method doesn't work at this moment.
Click to expand...
Click to collapse
Windows 10 here, no "older versions" for my P40 Lite E. However I manage to downgrade by putting the OTA zip on the SD card and updating from it. Then I was able to install and run lzplay. Now stuck at login though.
Hello everyone. A couple of days ago, I bricked my huawei mate 10 pro BLA-AL00 by flashing the wrong firmware. After a few days of experimentation, I was able to revive the phone by flashing the board software back onto the phone. Now the problem is that I am on a super early build of emui and it seems like its the stock factory software with a bunch of debugging programs on it. I am having some trouble updating the firmware to android 8. I downloaded this exact firmware file: https://androidhost.ru/bzx
I am having some trouble figuring out what files I need to flash. There is a main dload folder after extracting the files, but if I try to copy that onto a usb drive and flash it using the dload method, my phone will once again brick itself. I have tried flashing the all_cn firmware file using TWRP recovery, but that also bricks my device and puts it into a bootloop. I have also tried using the huawei update file extractor software and tried manually flashing the firmware using fastboot commands, but once again will just end up in a bootloop. Am i doing something wrong? I would really appreciate any help. Thanks
Hi,
I'm in the exactly same case. Did you manage to fix it?
iBen68 said:
Hi,
I'm in the exactly same case. Did you manage to fix it?
Click to expand...
Click to collapse
I finally managed to figure everything out after days of research and testing. You must download the BLA-AL00 8.1.0.351 full ota firmware from pro-teammt.ru and extract the update.zip folder. Next, I used MRT Dongle 3.19 cracked to flash the firmware. https://www.gadgetsdr.com/mrt-dongle-latest-crack/ To activate the program, you must use the keygen provided to generate a activation code after pasting in your device id. The device id can be found by opening the mrt program for the first time. Paste in the activation code found by the keygen into the activator and the program should open. Next, click on hw flasher and put your phone into fastboot mode. Make sure your bootloader is unlocked. I assume it is unlocked as you only flashed the board firmware. Under write flash click on the 3 dots near the bottom of the page, select the update.app file you extracted before, and click on start. Don't worry if it says fail for the first few commands. It should successfully flash everything else. Once this process is finished, your phone should reboot. We need to do one final step and write the oeminfo back into the phone. Put your phone back into fastboot mode by plugging in your phone and holding down the power and volume down buttons. In MRT, click on update hw soft_ver, select huawei mate 10 pro, and click on start. After flashing, your phone should reboot normally now into an operating system!!!
Thank you for your answer ! My Mate 10 Pro is BLA-L09, how did you know you have to use this specific firmware (BLA-AL00 8.1.0.351 full ota firmware) for your BLA-AL00? I guess I should use BLA-L09 full ota but which version?
iBen68 said:
Thank you for your answer ! My Mate 10 Pro is BLA-L09, how did you know you have to use this specific firmware (BLA-AL00 8.1.0.351 full ota firmware) for your BLA-AL00? I guess I should use BLA-L09 full ota but which version?
Click to expand...
Click to collapse
It took me a very long time and a large amount of downloading to figure out the exact firmware I needed to use. I just downloaded a bunch of version and see if it would flash onto my phone. Finally, the 8.1.0.351 firmware worked! For the bla-l09, im not too sure the exact version needed. I would experiment around and try a bunch of different full ota firmware from pro-teammt.ru Maybe you could flash the bla-al00 firmware and rebrand the phone? Im not too familiar with rebranding, but I know its possible.
I have tried with BLA-L09 8.0.0.115 firmware then my phone has reboot in a better factory version (EMUI 8 instead of EMUI 5), but still in factory mode, with the developpers apps. I've done the hw soft_ver update, but it still boot on this factory version. I've tried to flash another firmware (still BLA-L09 but another version), and now my phone stays shut down. I cannot even see it on my COM port. I've tried to use test point, I can hear the USB plug computer song but nothing happen. Phone no detected, black screen, no vibration. I've tested all the possible key combinaison (volume up, volume down, power button), still nothing .
Any idea of a last chance?
I was so close thank to your help!