Hello,
I got the amazfit verge update version 3.2.6.0 in my watch, when i try to download and install its failing.
Tried even after factory reset, still no luck.
Any ideas how to get it installed
bk25nov said:
Hello,
I got the amazfit verge update version 3.2.6.0 in my watch, when i try to download and install its failing.
Tried even after factory reset, still no luck.
Any ideas how to get it installed
Click to expand...
Click to collapse
Was your watch originally a Chinese version (A1801) and did you use the International/US/Global firmware installer to flash 3.2.5.0 firmware maybe ?
Got the update again from Amazfit app,it is installed and works fine now.
Thanks for checking:laugh:
Related
just open the prime in the box, it had one single update, which brings the firmware to latest 9.4.2.11.
however, after the major update, I got notification "Camera Firmware update is available", I started the update, it shows "Camera Firmware updating", and progress bar won't move at all, couple seconds later, a window pops up saying: "Camera Firmware Update Error".
I tried rebooting 2 times, tried Factory Reset.
I was going to try reverting back to 8.8.3.33, I downloaded the 318MB zip file, but don't know how to apply the damn zip file.
Could the problem be because the latest Firmware is installed, and Camera Firmware can't be installed from that?
anyone know what might be going on? and how do i apply a update .zip file?
Wanted to bump this up I am having same issue, everything else is flawless, really hate to return but I do need to occasionally use the camera. My camera version is TF201-0xFFFFFF, I am getting a notice of firmware update but it will not apply.
I have tried factory reset, I applied the newest 11.1 build and still no change. I have a few weeks yet before my return window is up, hoping a solution is discovered.
Latest cam version should be 0x9900
demandarin said:
Latest cam version should be 0x9900
Click to expand...
Click to collapse
Ya I saw that that was the latest version, but it will not install through the ASUS update. It just keeps saying that the update failed and would I like to retry. I was hoping someone found a solution to that as I have retried numerous time with no success. Maybe the ability to download the latest camera firmware and update manually somehow.
Tgure said:
Ya I saw that that was the latest version, but it will not install through the ASUS update. It just keeps saying that the update failed and would I like to retry. I was hoping someone found a solution to that as I have retried numerous time with no success. Maybe the ability to download the latest camera firmware and update manually somehow.
Click to expand...
Click to collapse
You can do that from Asus website. Manually install from website on a PC to the prime.
demandarin said:
You can do that from Asus website. Manually install from website on a PC to the prime.
Click to expand...
Click to collapse
I did that with the latest firmware they have posted which is Version V9.4.2.7(US) but after it completed I got the notification to update camera firmware. Since there is no separate camera firmware listed on their site I cannot do that for the camera. I then did the OTA to 9.4.2.11 hoping that would fix it but nope. Then I applied 9.4.2.11.1 and still have same camera version and every time I reboot I get the notification that there is a new camera firmware update. However it will not download or install it just fails with an error message saying it failed would I like to try again.
My front camera works through Gtalk, back camera displays crazy green screen. Camera app will not run it says I must install firmware update. I imagine if I can get the new firmware on my device it will solve the problem, but alas I cannot get the camera firmware to download.
Same problem update camera firmware
Hello,
I have the same problem relating to the camera firmware. When I look to 'my tablet' it's also the version TF201-0xFFFFFF. I was wondering if you've found a solution and what solution that may be
Thanks for any answer!
I ended up returning my prime to Amazon and getting a new one as ASUS wanted me to send it in for repair. If that is not an option for you then you will need to do a go through ASUS for repair.
Thanks for the response. Going back to the retailer where i bought it. sigh
Tgure said:
I ended up returning my prime to Amazon and getting a new one as ASUS wanted me to send it in for repair. If that is not an option for you then you will need to do a go through ASUS for repair.
Click to expand...
Click to collapse
Camera quit on mine. GPS also went out. I tried the factory reset as instructed by tech support. Ended up returning for repair. I'll have it back in about two weeks.
I have my amazfit rooted, and today i receive a message for update, should be update? or how can i ignore the update?
I like my amazfit rooted, so i dont want to update, but the message is showing over and over again.
thanks.
Same for me
If you have Pacefied rom dont update. Only for CN rom.
Hi, I have mediapad m5 pro CMR-W19 model on stock ROM. When I have notification about the software update from Huawei, I download it and installing the update. But when it's installing the update, it suddenly failed and can't do the boot. And everytime I turned on the device, it's only booted to Huawei eRecovery. When I do factory reset, it's always failed. I try to install the update using update.app on micro sd and always failed.
Please what can I do?
sorry for my bad English
If I understand correctly the update didn't complete?
Were you rooted before the update?
I don't really know what you can do, other than repeat what I mention in similar threads - when I bootlooped Funky Huawei's eRecovery method is all that worked for me. It's not free.
As long as everything is working smooth, I prefer to avoid updates. There is more to go wrong than to go right IMO.
Hello all,
Yesterday my P20 Lite (NOVA 3e) was updated to the 9.0.1 and after that all Google apps just stopped worked, it looks like the GMS installer is not working anymore.
I performed the factory reset and tried several times again to use the GMS installer, maybe the previous version don't work with EMUI 9.0.1. Any idea or suggestion? Is it possible to go back to the last EMUI?
Thanks!
riaj89 said:
Hello all,
Yesterday my P20 Lite (NOVA 3e) was updated to the 9.0.1 and after that all Google apps just stopped worked, it looks like the GMS installer is not working anymore.
I performed the factory reset and tried several times again to use the GMS installer, maybe the previous version don't work with EMUI 9.0.1. Any idea or suggestion? Is it possible to go back to the last EMUI?
Thanks!
Click to expand...
Click to collapse
I some as problem!!
Your boot loader is unlocked ?
Hi everyone!
After update to version 1.3.7.17, my GTR starts to not update A-GPS.
Then, i'll try to downgrade with Notify with Amazfit, and after update near 99%, the watch data error update.
Anyone knows how to force a firmware update /downgrade??
Thanks a lote!
haihai said:
Hi everyone!
After update to version 1.3.7.17, my GTR starts to not update A-GPS.
Then, i'll try to downgrade with Notify with Amazfit, and after update near 99%, the watch data error update.
Anyone knows how to force a firmware update /downgrade??
Thanks a lote!
Click to expand...
Click to collapse
Just uninstall Zepp, install an older version of Zepp and it will downgrade firmware.. Fixed!
(Then update the app to the newest version (Play Store) and it will install the latest firmware on your watch again.)
Hi! Thanks, but no works... Same problem: Zepp can't install old firmware.
Notify can install other things: old resources, old GPS... And when Zepp detects it, then updates the resources and GPS.
But can't downgrade firmware or put A-GPS....
There are some method to force ( and megaforce) firmware update?
haihai said:
Hi! Thanks, but no works... Same problem: Zepp can't install old firmware.
Notify can install other things: old resources, old GPS... And when Zepp detects it, then updates the resources and GPS.
But can't downgrade firmware or put A-GPS....
There are some method to force ( and megaforce) firmware update?
Click to expand...
Click to collapse
Hmm.. I've always managed it by following these steps. Have you tried several old firmware versions?
Hmz.. I think updating A-GPS stopped working all together.. I fear we have to wait for updated firmware.