Hi
went to up load the Poison Rom on the link below for my new T95z plus and once i loaded the rom i have no wifi or bluetooth when i boot up the device and it shows 0211 with the last 1 flashing or 0215 with the 5 flashing.
I have plugged in the male to male usb cable and tried reloading the firmware and it stops at 4% with error [0x10303004]romcode/switch status/identify/error result using USB burning tool 2.1.6 on the linked page below
https://forum.xda-developers.com/an...mputers/amlogic/t95z-plus-poison-rom-t3751720
Any help is much appreciated
Hazy261
hazy261 said:
Hi
went to up load the Poison Rom on the link below for my new T95z plus and once i loaded the rom i have no wifi or bluetooth when i boot up the device and it shows 0211 with the last 1 flashing or 0215 with the 5 flashing.
I have plugged in the male to male usb cable and tried reloading the firmware and it stops at 4% with error [0x10303004]romcode/switch status/identify/error result using USB burning tool 2.1.6 on the linked page below
https://forum.xda-developers.com/an...mputers/amlogic/t95z-plus-poison-rom-t3751720
Any help is much appreciated
Hazy261
Click to expand...
Click to collapse
I'm not a specialist but i had those errors.
1- There's a sd card in it, or
2- You got a LP Ram model, or
3- Usb burning tool/driver problem, badly installed maybe or connection to hub problem.
hey all
I have an Amazon android box with Rockchip 3328 (box model is HK1max). It's bricked and the seller sent me the RK burn tool and 2 different firmware versions (they weren't able to confirm which would work so said to just try both). Problem is the RK burn tool is in chinese, and the instruction doc is so broken english I can barely follow it. I havent used a burn tool since Odin on my S3 10? years ago
Right off the top, the chinese language burn tool doesn't recognize the box when plugged into my laptop via USB-a to USB-a cable. I downloaded and installed a driver and now my computer makes the connection prompt when it is plugged in, but nothing changes on the burn tool to indicate it detects the box. There is a reset on the box inside the audio aux port, i tried holding down the reset button, then plugging the USB cable in hoping it would get me into recovery, but still nothing.
Can anyone please provide me a tool in english and a dummy proof firmware installation instructions. Thanks.
Like I said, i have two firmware versions to try that were provided by the seller, I just need the first 90% of the problem lol
Use a USB burning tool (any one). The hidden button is in the AV port. Use a toothpick for it.
Any update on the issue mooseknuckles1?
Because i have the exackt same problem. Windows sound is on when i connect it. But nothing else and no driver is running from rockchip in device manager... only the same red LED on the device and nothing else...
Hello friends, I need help please, my tv box t95q which is one of the new ones in quotes, I installed several firmware to paret of yours that only failed me in wifi and I like them a lot and it turns out that I installed one of tanix x3 and between with the pc and the amlogic application and now the pc does not recognize me, the tv box or the system of installing via sd card does not turn on the blue light anymore and it does not give or image I have seen that there is a method making a small short with the tv Box disassembled but I saw it and it was another tv box and I don't know where I should do it in mine if you know something and can help me please I appreciate it very much
Ho, you would need to use mask rom mode, this will force your box to be detected in USB burntool, this is achieved by shorting 2 pins on the nand flash usally
Hi guys
I've just received Tanix TX9S android box and I'm trying to flash a custom rom but my computer doesn't detect the box. I'm using Win 10 Pro 64bit and I've tried reinstalling the burning tool, installing with driver signature off, restarting, changing usb ports on both the pc and the box but it just doesn't work. I'm using this cable: https://www.aliexpress.com/item/4000574237363.html
Any ideas?
kalehrl said:
Hi guys
I've just received Tanix TX9S android box and I'm trying to flash a custom rom but my computer doesn't detect the box. I'm using Win 10 Pro 64bit and I've tried reinstalling the burning tool, installing with driver signature off, restarting, changing usb ports on both the pc and the box but it just doesn't work. I'm using this cable: https://www.aliexpress.com/item/4000574237363.html
Any ideas?
Click to expand...
Click to collapse
Cable Looks Quite Thin, It Says IUts A Data Cable So Should Work Just Might Not Provide Enough Power, Try Connecting Power At Same Time, that may help, or you might have to use mask rom mode to force your box to be detected
I tried connecting power but to no avail. I don't think I will be opening the box so I'll have to live with stock ROM
kalehrl said:
I tried connecting power but to no avail. I don't think I will be opening the box so I'll have to live with stock ROM
Click to expand...
Click to collapse
Aww, something you should try, when you eventually upgrade and it becomes a spare device
Maybe I can try with an sd card.
I also have some logs in amlogic folder.
I've noticed 'NoDeviceConnected' error and sometimes 'Other device'.
kalehrl said:
Maybe I can try with an sd card.
I also have some logs in amlogic folder.
I've noticed 'NoDeviceConnected' error and sometimes 'Other device'.
Click to expand...
Click to collapse
Yhea SD Card Is Another Option, i Just Generally don't recommend This Method as if you flash a incompatible firmware and your device wont turn on then USB Burn Tool Will Be needed To Fix And Flash From a "Bricked" State
I managed to flash my box.
I used the latest burning tool v3.1.0. During the installation, I plugged my box into the computer and saw that it not only installed world cup drivers, but additional ones as well which was a good sign. I also had to use the power supply because usb didn't output enough power.
kalehrl said:
I managed to flash my box.
I used the latest burning tool v3.1.0. During the installation, I plugged my box into the computer and saw that it not only installed world cup drivers, but additional ones as well which was a good sign. I also had to use the power supply because usb didn't output enough power.
Click to expand...
Click to collapse
I have the same issues. At the moment that you plugged in your box with usb cable was your box already on power? en did you have to use the reset by toothpick reset at the time you plugged in?
BUZZTV XRS4900
Yes, already on power and I used a toothpick.
But flashing is hit and miss with amlogic burning tool.
Sometimes it works, sometimes doesn't.
Try a different computer because for one of my boxes I had to use a Windows 7 machine.
kalehrl said:
Yes, already on power and I used a toothpick.
But flashing is hit and miss with amlogic burning tool.
Sometimes it works, sometimes doesn't.
Try a different computer because for one of my boxes I had to use a Windows 7 machine.
Click to expand...
Click to collapse
Thank you.. I tried several options and cables and pc's.
When on power the toothpick doesn't work because it is already operational i guess
I try the mask rom method. Hope that will do the job
kalehrl said:
I managed to flash my box.
I used the latest burning tool v3.1.0. During the installation, I plugged my box into the computer and saw that it not only installed world cup drivers, but additional ones as well which was a good sign. I also had to use the power supply because usb didn't output enough power.
Click to expand...
Click to collapse
this doesn't sound like a good sign to me... world cup drivers !!??
I've yet to flash my box and I'm really put off by the fact that guides mention to ignore virus warnings and just to click OK. I haven't yet seen it uploaded onto xda either which makes me confident.
Try older versions of the Amlogic USB Burning Tool, newer versions might not work with older boxes.
You can find most of the versions here: Amlogic USB Burning Tool - All Versions
The problem was the cable. The Chinese one I bought first didn't work properly. The cheapest one from Amazon worked fine.
Same here mine to does not detect but i have noticed in device manager it appears an unknown device
Reinstall the driver.
EdT586 said:
Try older versions of the Amlogic USB Burning Tool, newer versions might not work with older boxes.
You can find most of the versions here: Amlogic USB Burning Tool - All Versions
Click to expand...
Click to collapse
thxy men, i tried use the latest version and don't work, after saw ur comment i can revive my tv boxes
hello I have a problem with the a95x f3air box .. how to connect the pins to usb burning tools see it?
Peplezz said:
hello I have a problem with the a95x f3air box .. how to connect the pins to usb burning tools see it?
Click to expand...
Click to collapse
add some board pictures and can try help