Related
when i start to download any file which is big ,after the screen goes black after 1 minute the WiFi also stops working i have to start the machine again and the WiFi starts to work again
it means that i wont be getting any notifications while the screen is off as the WiFi is off .not nice
any way of getting around it
thanks
Download "Advanced Wifi Lock (Free)" from the store and set it so WiFi doesn't go off. It's somewhat of a battery killer but it's better than the alternative.
The wifi is a big flaw in the Tablet S that wasn't fixed in ICS.
boxer29 said:
when i start to download any file which is big ,after the screen goes black after 1 minute the WiFi also stops working i have to start the machine again and the WiFi starts to work again
it means that i wont be getting any notifications while the screen is off as the WiFi is off .not nice
any way of getting around it
thanks
Click to expand...
Click to collapse
Try this: before downloading the file, go into advanced Wi-Fi settings and set the Wi-Fi disconnect policy to "Never" or if you have your tablet connected to its charger, "Never when plugged in". After the file has been downloaded, set the disconnect policy back to what you normally have it set to.
This is the WLan Bug. Sony cant get it better with ICS and to change the Wlan Settings does not bring the result.
So take your Screentime to max about 5min. and tap every 2 or 3 minutes the screen. Revert this Settings after download is complete.
greetings Dimes
I've only ever had this problem once, and I could fix it by just going to Settings>WiFi Settings>Advanced>Disconnection Policy and said "Never". That would be my suggestion since (as mentioned) third-party WiFi lock's chew through battery like theres no tomorrow...
Good ideas. I also use an app that does not let the screen sleep when the power cord is plugged in.
http://www.appbrain.com/app/stay-awake-widget/net.leppoc.android.dashboard
I am using the SWApp App and it seems to not vibrate or get notification until I press the power button. How can I get notifications in real time and not by pressing power button? Is the Bluetooth going to sleep when put to sleep? Thanks
I Always get a notification... dont need to press anything, have you got a power saver app that is regulating the connections? Normally its wifi that gets killed when screen is off...
Same thing happens to me.
I get the notification at the exact same time the screen turns on.
I doubt this is a bluetooth problem because if I receive a sms and go to plane mode on the phone, the notification still appear when I turn the swatch screen on. (then, swapp link crashes)
If I do not turn the screen on, I still receive the notification, but several minutes later.
@MrTip Did you figure out how to fix the bluetooth sleep/delay issue? Thanks
MrTip said:
Same thing happens to me.
I get the notification at the exact same time the screen turns on.
I doubt this is a bluetooth problem because if I receive a sms and go to plane mode on the phone, the notification still appear when I turn the swatch screen on. (then, swapp link crashes)
If I do not turn the screen on, I still receive the notification, but several minutes later.
Click to expand...
Click to collapse
Firmware issue. General rule is stock for standalone and BT ROM (assuming your TS is even compatible) for companion.
Thanks @Lokifish Marz
Same issue with BT Rom . It only gets notification when power is pressed or notification is delayed. It does get notification when it's supposed to if the device is charging. Swapp/OSmart bluetooth notifications do not work on 20140120, 20140120 with EnSec, 20140527, or Dee Troy 1.1.1 BT Rom. Is this still a firmware issue or can it be hardware? Why is no one else having this issue or is it isolated like MrTip and me? Thanks again!
btw I can bluetooth internet tether with BT Rom now....
Lokifish Marz said:
Firmware issue. General rule is stock for standalone and BT ROM (assuming your TS is even compatible) for companion.
Click to expand...
Click to collapse
techknight180 said:
@MrTip Did you figure out how to fix the bluetooth sleep/delay issue? Thanks
Click to expand...
Click to collapse
In my (successful) attempt to get a working recovery I started with a blank slate and did not reinstalled swapp links yet.
I'm trying to figure out if my Edge is bad. When I turn the screen off, and come back to the phone a few minutes later, I'll get a notification stating it has connnected to my router. I've checked the settings and it states the wifi is set to be always on. I attempted a factory reset and still no luck. Sometimes it'll take a few moments before it even connects to the wifi again upon turning the screen on.
Do I have a bad phone?
vaxick said:
I'm trying to figure out if my Edge is bad. When I turn the screen off, and come back to the phone a few minutes later, I'll get a notification stating it has connnected to my router. I've checked the settings and it states the wifi is set to be always on. I attempted a factory reset and still no luck. Sometimes it'll take a few moments before it even connects to the wifi again upon turning the screen on.
Do I have a bad phone?
Click to expand...
Click to collapse
I would check under the advanced settings for wifi, there's an option for what to do with wifi during sleep. That may be your problem.
I've already checked and it''s enabled.
vaxick said:
I've already checked and it''s enabled.
Click to expand...
Click to collapse
I have the same thing happening. I noticed when I was backing pics on one drive
. It would always say that back up has stopped because there was no WiFi After turning the screen on again.
I just got my Edge yesterday, and I am having the same problem with wifi AND also that it stops seeing any wifi and I have to toggle it off and back on manually THEN it will instantly connect to my known network.
Dear @vaxick,
Dial *#0011# and click on more>>WiFi>>"WIFI Power save mode" try to disable this option and see what happens.
*it might drain your battery faster.
Regards
bluff master said:
Dear @vaxick,
Dial *#0011# and click on more>>WiFi>>"WIFI Power save mode" try to disable this option and see what happens.
*it might drain your battery faster.
Regards
Click to expand...
Click to collapse
Thank you for this suggestion, unfortunately it had no effect as I have observed the same wireless disconnect behavior now with both the WiFi power save both on and off. Once the wireless disconnects it no longer see ANY wireless networks no matter where I go until I toggle the wireless off then back on again. Then it will see all wireless network present around me and instantly connect if there are any of my saved networks present. At this point I believe it is either a hardware or worse a software problem with my phone, but I am really at a loss to the exact nature of this issue.
Mine also has this issue when connected to 5GHZ SSID. Connecting to my 2.4GHZ SSID solves this problem completely for me
dazbutler1 said:
Mine also has this issue when connected to 5GHZ SSID. Connecting to my 2.4GHZ SSID solves this problem completely for me
Click to expand...
Click to collapse
I hope that this is a hardware issue with my phone, as your "solution" is totally unacceptable for me, especially since my work place has bandsteering AP's that use the same SSID's for both 2.4 and 5GHz.
Moguledyouth said:
I hope that this is a hardware issue with my phone, as your "solution" is totally unacceptable for me, especially since my work place has bandsteering AP's that use the same SSID's for both 2.4 and 5GHz.
Click to expand...
Click to collapse
Yeah, i have to turn WIFI off whilst at work for the same reason. Certainly hoping it's just a software bug and will be fixed quickly as it is by no means an ideal workaround
I also see this kind of problem since last 1 week, here is how i noticed. i user viber messaging app and it shows status online if you are connected. Lot of my friends started complaining that my status is not continuously online and fluctuating so i started doing tests.
Moment my display turns off i started counter and in 10 minutes my status changes as last seen and whenever i open viber app again i am online.
second test: i tried doing the same with whatsapp and connected at web.whatsapp.com and same thing happens within 10 mins i see yellow bar appearing that my phone is disconnected so again i have to open whatsapp on phone to reconnect.
this is very annoying to see this kind of problem on new phones, especially when old phones are working flawless.
Kind of the same problem, but with GPS. Once I disabled the battery saver mode, it stopped disconnecting. Have you tried that?
Are you referring to power saving mode in battery settings. i did check and they are turned off. No idea what else i am missing here.
I tried re-installing viber but still after 10 mins its keep disconnecting.
WiFi >> More >> Keep WiFi on during sleep >> Always
Problem solved
Sent from my SM-G925F using XDA Free mobile app
vvally said:
WiFi >> More >> Keep WiFi on during sleep >> Always
Problem solved
Sent from my SM-G925F using XDA Free mobile app
Click to expand...
Click to collapse
I'm having the same issue on my regular non edge s6. This settings is not doing anything have it on always still always drops the wifi when going to sleep. Its driving me crazy no idea why its doing this
i did check and i have Keep WiFi on during sleep >> Always option but still drops, no clue whats wrong with my phone.
I had the same issue and solved it by changing my routers security from WPA2/Mixed Mode to WPA2 Personal. Since this change, it works fine on both 2.4 ghz and 5 ghz.
dazbutler1 said:
Yeah, i have to turn WIFI off whilst at work for the same reason. Certainly hoping it's just a software bug and will be fixed quickly as it is by no means an ideal workaround
Click to expand...
Click to collapse
I received my Galaxy S 6 edge a week ago and I am having this same peculiar reconnecting issue to WiFi that has been described here.
Solution?
I was having this same issue and was unable to find any good solutions for it online, but eventually found something for me that worked through experimenting:
Find the above mentioned "Keep Wi-Fi on during sleep" option (which is probably set to "Always" already), change it to "Never", and then change it back to "Always". Since doing this I haven't had it disconnect from the wi-fi once, where as before it would do it everytime the screen had been off for a few minutes.
The problem started happening sometime after I played with power saver mode, so I think it might be related to that. I know that the software has some other bugs related to power saving mode, as I had a previous problem where my softkeys stopped vibrating or lighting up, which ended up being related to not exiting ultra power saving mode correctly and was fixed by going re-enabling ultra power saving mode and exiting again.
On the 25th of May, the new Android Wear started to get installed to Moto 360 2nd Gen devices.
Did you get it yet?
Sent from my m1 note using Tapatalk
In italy I still did not get any updates
scorpionredblack said:
In italy I still did not get any updates
Click to expand...
Click to collapse
You Can Force the update...i'm italian and i have install It yesterday.
How do I force him?
scorpionredblack said:
How do I force him?
Click to expand...
Click to collapse
Put your Watch in charge, and connect It in wifi (disable the bluetooth from your phone)
Go in setting ---information--update
You can force the update, just repeatedly tap on the green "system is up to date" screen.
When the download of the update begins, you need to keep your finger on the screen so that the smartwatch does not return to the charging screen.
Good luck
I received the update. The watch stuck on finishing update. Any one have same problem?
n4m3less said:
Put your Watch in charge, and connect It in wifi (disable the bluetooth from your phone)
Go in setting ---information--update
You can force the update, just repeatedly tap on the green "system is up to date" screen.
When the download of the update begins, you need to keep your finger on the screen so that the smartwatch does not return to the charging screen.
Good luck
Click to expand...
Click to collapse
It really worked!! Thank you
Since 2.0, my watch isn't showing the Hour when i put it in recharge mode at night. It goes in recharge mode for 5 secondes, showing the hour, and then it goes to a grey screen for all the night. Its annoying to sleep, and useless cause i cant see the hour.
Anyone with the same issue or have an idea?
I found a solution, but i dont know if it's not a bad solution for the battery life of the watch: putting "ALWAYS ON DURING CHARGE" mode in the developper's options. I'am scared to damage the watch and the battery, forcing it to be ON all the night and charging.
n4m3less said:
Put your Watch in charge, and connect It in wifi (disable the bluetooth from your phone)
Go in setting ---information--update
You can force the update, just repeatedly tap on the green "system is up to date" screen.
When the download of the update begins, you need to keep your finger on the screen so that the smartwatch does not return to the charging screen.
Good luck
Click to expand...
Click to collapse
I can't use my watch when it's charging.
How did u open the settings/info panel?
Sent from my m1 note using Tapatalk
RASTAVIPER said:
I can't use my watch when it's charging.
How did u open the settings/info panel?
Sent from my m1 note using Tapatalk
Click to expand...
Click to collapse
Click on the side button of the watch for 2 seconds when it charges, this will open the options of the watch.
Forced update?
Couldn't get this to work for me.
I'm curious though, just how Moto (or Google as the case may be) implements a "gradual" update (that is, some users get it before others).
retiredguy1945 said:
Couldn't get this to work for me.
I'm curious though, just how Moto (or Google as the case may be) implements a "gradual" update (that is, some users get it before others).
Click to expand...
Click to collapse
This is the same as it happens for mobiles.
During big updates you can find devices getting the update with many days difference.
Sent from my m1 note using Tapatalk
djulien83 said:
Since 2.0, my watch isn't showing the Hour when i put it in recharge mode at night. It goes in recharge mode for 5 secondes, showing the hour, and then it goes to a grey screen for all the night. Its annoying to sleep, and useless cause i cant see the hour.
Anyone with the same issue or have an idea?
I found a solution, but i dont know if it's not a bad solution for the battery life of the watch: putting "ALWAYS ON DURING CHARGE" mode in the developper's options. I'am scared to damage the watch and the battery, forcing it to be ON all the night and charging.
Click to expand...
Click to collapse
this wil fix it: When turning on in settings 'always on display' it works like before. no need to enable stay awake while charging in developers settings.
Although this fixes the issue, I am somewhat disappointed because this option reduces battery life.
Sn0w0nS said:
this wil fix it: When turning on in settings 'always on display' it works like before. no need to enable stay awake while charging in developers settings.
Although this fixes the issue, I am somewhat disappointed because this option reduces battery life.
Click to expand...
Click to collapse
Yeah, and with my watchface, "Always on" display option is unsupported, this looks very ugly because the watch never sleep off, it stays turned on all the time with the brightness at minimum, even if i cover the watch.
djulien83 said:
Yeah, and with my watchface, "Always on" display option is unsupported, this looks very ugly because the watch never sleep off, it stays turned on all the time with the brightness at minimum, even if i cover the watch.
Click to expand...
Click to collapse
What watch face are you using?
Sn0w0nS said:
What watch face are you using?
Click to expand...
Click to collapse
Skymaster by Zuhanden
https://play.google.com/store/apps/...tchface.watch.face.aviator.android.wear&hl=fr
n4m3less said:
Put your Watch in charge, and connect It in wifi (disable the bluetooth from your phone)
Go in setting ---information--update
You can force the update, just repeatedly tap on the green "system is up to date" screen.
When the download of the update begins, you need to keep your finger on the screen so that the smartwatch does not return to the charging screen.
Good luck
Click to expand...
Click to collapse
I tried again.
Clicked many times on the green screen, but nothing happened.
Do u need to do it a specific number of times or to click when there is a specific message?
Sent from my m1 note using Tapatalk
RASTAVIPER said:
I tried again.
Clicked many times on the green screen, but nothing happened.
Do u need to do it a specific number of times or to click when there is a specific message?
Sent from my m1 note using Tapatalk
Click to expand...
Click to collapse
Keep tapping until it happens. Might take a while, but it will happen. I tapped mine for over a minute straight multiple times before it showed up.
Now if it would stop constantly running into a problem while installing...
I had to turn off my wifi manually as after downloading, while countdown to restart, it always stopped in between with the same green screen and message that system is up to date. So after downloading is complete, just turn off the wifi. And also make sure to disconnect bluetooth before you try force updating, just connect with wifi on watch, it'll work for sure.
vishal007 said:
i had to turn off my wifi manually as after downloading, while countdown to restart, it always stopped in between with the same green screen and message that system is up to date. So after downloading is complete, just turn off the wifi. And also make sure to disconnect bluetooth before you try force updating, just connect with wifi on watch, it'll work for sure.
Click to expand...
Click to collapse
omg this worked! Thank you so much!
Hello,
Have any of you had a problem of auto disconnection with the application? I have already restored the factory settings several times and the problem still occurs maybe one of you had such a problem and could advise me how to deal with it, I don't get any notifications, which starts to irritate me
Regards
what device (model and ROM version) and what phone? Without any info about your setup it's very hard to try to help...
Anyway, the most common causes to connection issues are other app that may conflict with Amazfit app or kill it while in the background (check your phone settings) and Bluetooth/WiFi conflict. To test the later, disable all WiFi, put phone in Airplane mode then turn only Bluetooth on and see if connection gets better.
I have Stratos A1619 with PolishROM my phone is Huawei Mate 10 lite, but on any kind of ROM that problem occurs
Put your phone in Airplane mode and turn on only Bluetooth, make sure Amazfit app is open and running, confirm that watch is connected then move watch away from the phone. How far can you go without disconnecting? If it disconnects after just 30-50cm then most probably it's a hardware issue. But I'd recommend that you go entirely stock to test these things, it's hard to pinpoint anything using modified ROM.
Heey, you have options in that place where you can uninstall app, battery saving mode or optimization - sth like that. I have stratos and note9 and i have the same problem. Watch seems like have connection (top options at top left symbol phone with tick that means - connected to phone). But phone is saying disconnected. What helps - turn in airplane mode in watch, wait few seconds and turn airplane mode off.
But as i was saying - check battery optimization options and turn that function off in phone. If you are from Poland then write to me PM - i try to explain this in out native language