I was loading original language on my Amazfit Pace watch using Huami Amazfit_Tool. I think the process is going on in the command system, but I unplugged the watch from the computer and the watch no longer turns on. It does not go beyond the text A on the screen. And when I connect the clock in the program, the bottom line says -exec '/ system / bin / sh' in blue. Is there anyone who has an idea of what's going on and can say what to do?
Related
This thread will be used to collect all the issues people are having with the watch and then have the solution for the problem right here so that they won't be asked multiple times. I will only list the issues with a solution available and I will keep updating this. Be happy to expand the list on your own.
So let's get started...
Problem:
The watch doesn't vibrate although vibration is enabled on the watch.
Solution:
Make sure the app which doesn't vibrate on the watch is set to vibrate on the phone.
-----------------------
Problem:
The screen stays on while charging even when the "always on" option is disabled.
Solution:
First place the watch in the charging cradle and then disable the "always on" option (this is more of a work-around and not an actual fix)
-----------------------
Problem:
Some sort of driver problem.
Solution:
Can be found here.
-----------------------
Problem:
Can't pair the watch with another phone after you have paired it with a different one before.
Solution:
You will have to factory reset it.
-----------------------
Problem:
The watch hung up while booting or similar and now it's stuck as you can't restart it.
Solution:
You can force a restart by pressing the reset button for 8 seconds.
-----------------------
Problem:
The watch won't boot when put in the charging cradle (with power plugged in).
Solution:
Try holding the reset button for 1 second. If the watch boots the cradle is broken. If it doesn't the watch is broken.
-----------------------
Problem:
Accidentally swiped away a card and now it won't come back.
Solution:
Do a google search (eg to get back weather search for the weather) or reopen the app if it was an app-notification. If this doesn't work check if the google now card is available on the phone. If that is not the case, just wait they will reappear (it can take quite some time though). If it shows up on the phone but not the watch, unpair the watch and then pair it again.
-----------------------
Problem:
Google search shows "disconnected" although the watch is paired and connected.
Solution:
Unpair the watch and then pair it again. If this doesn't work (sometimes it doesn't) restart the watch.
Awesome tips, buddy! Here's a few tips for people that aren't aware:
1) Mute (pulling the screen down from top to bottom): This will stop your notifications and vibrations, but they will be there when the watch face is touched. and also prevent your watch from turning on/becoming active when you move your arm around or lift it to the 40 degree angle.
2) Quick Watch Face Change: Without having to go to "Settings>Change watch face" every time to change your watch face, all you need to do is touch & hold your active watch face screen until it shows you the Watch Faces folder.
Recently my Amazfit BIP automatically updated and it stoped being able to connect via bluetooth.
So I tried to reset to factory settings and now the Amazfit is frozen an its screen only shows the icon of connecting the watch to the smartphone, and it's not possible to stop this process.
I've tried to use different apps to connect and although they can find the watch, they are unable to connect.
Have anyone faced a similar situation?
Wait till it drains out en then start it up again. U should see the pair to device icon
Hi guys, excuse me for my bad English, I'm Brazilian and I'm writing by google translator. I have an amazfit pace smartwatch that over time his touch screen stopped working. The touch commands do not work, it is only possible to see the display with the time and pedometer. I tried to synchronize the clock with the cell phone but I can't because the touch doesn't work it is not possible to accept the pairing with the cell phone through the watch screen. Do you have any solution? Because I did the factory reset via the pc and I had to synchronize the hours through commands (abd). My question is .. can I use the watch only by commands connected by the pc's usb cable? Like if I try to synchronize with the cell phone, how can I accept the pairing of the watch using some command line by (abd)? I accept any help.
Good day.
Having trouble with my amazfit stratos watch.
After trying of flashing new rom, the watch doesn't respond to buttons, doesn't turn on, doesn't go into bootloader. Just a few lines on a screen, like a fuzzy writing.
Du all that, pc do recognize and also a all in one tool does.
Can't flash nothing to it, not from the cmd and not from the tool.
Help... SOS....
My device is not turning on anymore..
i did try all the solution with pressing the button in many ways, Both buttons for 30+ sec, only red button also and other trials. Nothing.
Then i opened the smartwatch and if i've disconnect the battery clip inside, After i reconnect the clip connection, the device started with Amazfit logo, then reach the watch time screen and after 1 second it flash the screen, then it turn off immediately. After that there is no way to switch the device on, the only way i found is this. PS: also connected in charge do not turn on.
The meaning is that the Smartwatch still working but i think there is a software issue,
There is any way to flash or reset by software the device? Any way to update it connecting to a PC?