Poco x2 battery issue fix method - Xiaomi Poco X2 Guides, News, & Discussion

Hi
Guys today i am writing this method here on XDA
It worked for me not sure if this will work for your device
Don't forget to give like:good:
Soo this method is very old (old is gold)
You will loose data make sure to backup data
IMP(TRIED ON STOCK ROM WITH STOCK RECOVERY ONLY)
Sooo let's begin
SO FIRST YOU NEED TO RESET DEVICE WIPE EVERY THING ( Keep battery atleast above than 50%)
Now Set-up device
IMP- Don't set up mi account (Ps- Don't use mi apps)
Now drain full battery without installing lots of crap
When you device will Power off keep it untouched for like 15-20 min
Now again turn on phone and drain that remaining battery also
Next step you have to charge phone without turning on(IMP) Till 100 don't interrupt in between and even of battery charges to 100% keep it for more 15-20 min(IMP)
Set up device and install required apps
And You will see that there is no battery drainage issue any more
Conclusion with this you are calibration your battery
If this helped you please Give thanks Feels good
Bye

Can anyone substantiate this?

Related

[Q] Heavy Battery Drain

Hi!, Yesterday i installed the last version of CyanogenMod 6.5.4, and i have 2
mayor problems with this rom but i don'y know if am doing something wrong.
This are the steps i followed:
Root: Gingerbreak
Recovery ClockworkMod 3.1.0.0 installed with Rom Manager
Then manually Wipe Data, Cache, Dalvik Cache & Battery
Flashed Cyanogen Mod without formatting mem card... just plain
Rebooted
Installed some Google Apps
Everything fine at this point.
Next the problems:
1.- After 2 hour of standby the battery drops 20% and i don't have
3rd party apps running. All data is turned off, only 2G enabled.
2.- Bluetooth don't work, i can't send o receive any file, my computer can't see my phone.
Previusly i made a backup of some apps and configurations with Titanium Backup and i restored apps and a config of bluetooth but the restore freezes
and i use to force close the app. This could be the config that mess up the
bluetooh?
Any idea how to resolve this problems, i love this rom but i can't live with
this huge preblems. I am new, and any help would be great.
Btw: Actually i'm using a new kernel (franco's v17 BFS version) hopping this can fix the battery life problem.
Thanks in advance !!!
Hei mate, read this see if it applies to you: http://forum.xda-developers.com/showpost.php?p=14950218&postcount=3205
Thanks for your time & help. I readed that post and by default since i installed
the rom i disabled all kind of sync, so maybe it's another thing, but thanks anyway!!!
if the rom has a battery graph included in Settings > Applications > Battery use then check it out and see if the "Awake" matches the "Screen on".
Those 2 have to be identical, if not, then something is keeping your phone awake even when the screen is off. All you have to do is uninstall/disable one thing after another until you see they start being identical.
jan.petras said:
if the rom has a battery graph included in Settings > Applications > Battery use then check it out and see if the "Awake" matches the "Screen on".
Those 2 have to be identical, if not, then something is keeping your phone awake even when the screen is off. All you have to do is uninstall/disable one thing after another until you see they start being identical.
Click to expand...
Click to collapse
Wow! too fast response, thanks
Yeah! you right those 2 are identical, none is bigger than the other, btw after flashed
the new kernel, it apperars to be stable it drains 2 and a half % after 2-3 hours. You think this number are good for this standby period?
Charge till 100% again wipe battery again.. see any difference , it take 24 or 48 to have a nice battery after a wipe batt stat.
It's say thats the superior limit on which you can go. Some say 1% battery drain / hour is totally normal but nothing above.
I tend to disagree and I'm not satisfied if its more than 0.6% / hour. However, 1% should be good for normal usage (meaning you have access to the charger everyday).
I only rarely have access to the charger, spend a lot of time hiking and need it to be really really low.
I've spent so much time identifying battery drains that I think just buying a solar charger would have been more productive for me.
crankyboy said:
Charge till 100% again wipe battery again.. see any difference , it take 24 or 48 to have a nice battery after a wipe batt stat.
Click to expand...
Click to collapse
Yeah! i made that and now i have a better battery life, thanks everyone for your
usefull advice!
Just one more thing... Any idea about my bluetooth problem?... it's a Rom problem
or my mistake?
Mine drains 1% per 2 hours on idle. Dunno if it's good or not

How to calibrate battery properly?

I'm really hitting a dead end with my phone recently. I flashed devoid froyo final with Franco's kernel v18 and have been getting horrible battery life. I'm not sure if I calibrated my battery correctly and I doubt its the rom or kernel at fault since everyone else is getting fantastic battery life. I have been using void echo until last month when I switched to the more updated roms of open optimus and devoid with Francos kernel since v12 i think.
I had great battery life with void echo but since moving up to the newer ones and newer kernel, its been horrible.
Can someone help me on what to do to properly calibrate my battery? And maybe on what app to use to find out the cause of the problem?
Sent from my LG-P500 using XDA Premium App
Charge your phone fully, calibrate battery using battery calibrate app, disconnect your phone, let it drain completely, then charge to 100% without pause.
Sent from my LG-P500 using XDA App
With data on you will loose hell lot of battery either with FKv17 or FKv18....Desable data when u not need it..it will improve your battery strength.... And as suggested use full charge and discharge process to get every penny from battery.
probably install watchdog to check if some internet related app is draining your battery....uninstall those and watchdog after your work is done as wastchdog also consumes little battery....
flash void# forever i suggest...and wipe everything to start fresh....
hit the thanks button if i have helped you.
I charge to 100%, wipe batt stats from recovery, discharge to 0, take out batt, put on, try to on the phone for 3 times, then charge to 100% without using the phone
Battery Calibration
I've been doing the following steps after flashing new ROMs or if I just want to calibrate my battery:
1) Recharge the battery to 100%
2) Reboot into recovery without disconnecting the charger
3) Wipe battery stats
4) Reboot & wait until your phone is fully operational
5) Disconnect the charger
6) Use the phone as normal & let the battery drain to 0%
7) Recharge the battery to 100% preferably with the phone switched off
8) Disconnect the charger & use the phone as normal
raylgo said:
I'm really hitting a dead end with my phone recently. I flashed devoid froyo final with Franco's kernel v18 and have been getting horrible battery life. I'm not sure if I calibrated my battery correctly and I doubt its the rom or kernel at fault since everyone else is getting fantastic battery life. I have been using void echo until last month when I switched to the more updated roms of open optimus and devoid with Francos kernel since v12 i think.
I had great battery life with void echo but since moving up to the newer ones and newer kernel, its been horrible.
Can someone help me on what to do to properly calibrate my battery? And maybe on what app to use to find out the cause of the problem?
Sent from my LG-P500 using XDA Premium App
Click to expand...
Click to collapse
please kill these apps. u dont need these apps running while u and ur phone is sleeping.there is a batter drain of only 2% for every 8hrs of sleep (tested by me only)
1)maps
2)market
3)browser
4)google voice
5)google contact sync
6)google calender sync
7)market feed back agent
8)google back up transport
9)user dictionary
10)dsp manager
11)and in the last (last only)google service frame work.
please dont use antivirus softs and process managing apps( Grow up)
if ur so particular in using a process manager use super manager.
(usual blah blahs.....aka
after installing rom/kernal charge ur batt to 100%, wipe batt status,let it drain to 0% allow ur phone to switch off itself and then charge to max. give the phone atleast 48 hrs to settle to the new rom/kernal)
and.........
http://forum.xda-developers.com/showthread.php?t=1071885
Before you start doing this make sure you have time on your hands.
Follow it step by step...
Read the entire set of steps and comments first.
Do not deviate.
If you are having issue's with it not charging fully. "70% to 90% and no further." then begin at step 7
If you have Xrecovery installed wipe battery stats first to reset the battery cache to the defaults.
This post will not talk about apps or any odd mods.
It's here to clear up on how to properly optimize the battery in your phone.
The battery has a cache file used to set the top and bottom battery level.
Today i am gona teach you how to set it correctly using nothing more than your phone and charger.
While doing this it will also properly "cycle" the cells.
1. Charge your phone fully to 100%
2. Plug out your charger & switch off your phone.
3. Remove the battery and plug in the charger.
4. Re-insert your battery
This is sets the top end battery parameter to a higher state allowing for further charging.
Should read 88% now.
5. Keep a eye on your phone as it charges!!!
Remove the back plate and feel if it's getting hot "it should not be a issue"
6. Repeat steps 1 to 5
Repeat this no more than 2 to 5 times till the battery will not charge further
A few extra may be required...
The battery may get stuck at 70% to 99% "most of the time 88%"
The cells have now reached full potential
IF in the case that it keeps charging after the 5th time your battery is fully optimized Enjoy
7. Let your phone run down it's battery
Don't use the phone aggressively
Leave it till it switches itself off
Now it has marked the very lowest point of the cell in the cache
8. Don't leave the battery empty, begin charging as soon as possible.
If your phone does not switch on right away.. relax.
Just leave it on charge for about a hour "will switch itself on"
9. Repeat steps 7 and 8 a few times.
You will notice each time that the battery may charge just slightly bellow 100%
Getting closer to 100% each time
10.Soon it will read 100%
It has now marked the top charged point for the cells
If step 7&8 does not bring the battery to 100% use the battery calibration app from the market.
Don't rush.. take it calm and easy.
Click to expand...
Click to collapse
josinpaul said:
http://forum.xda-developers.com/showthread.php?t=1071885
Click to expand...
Click to collapse
I think this is for x10 only, 'cause it haves a different CHMON (just saying, no sure thing)
I use battery calibration app its free in the the market, at least it worked for me
Enviado desde mi LG-P500 usando XDA Premium App
Battery drain can also cause due to some buggy apps that keep running in background, and taking lots of cpu usage during sleep.
If you are sure you have calibrated the battery correctly, and still facing problem with the drainage, I would suggest to try an app "systempanel" from market.(paid)
https://market.android.com/details?id=nextapp.systempanel.r1&feature=search_result
Keep the monitoring tool on for a day, this apps itself will consume few pinch of your battery for keep running in background, but once it generates the reports: you will know what apps are exactly using your phones CPU/Data/battery % etc which will help you to remove such buggy apps.
Hope it helps.
mansirawat said:
Battery drain can also cause due to some buggy apps that keep running in background, and taking lots of cpu usage during sleep.
If you are sure you have calibrated the battery correctly, and still facing problem with the drainage, I would suggest to try an app "systempanel" from market.(paid)
https://market.android.com/details?id=nextapp.systempanel.r1&feature=search_result
Keep the monitoring tool on for a day, this apps itself will consume few pinch of your battery for keep running in background, but once it generates the reports: you will know what apps are exactly using your phones CPU/Data/battery % etc which will help you to remove such buggy apps.
Hope it helps.
Click to expand...
Click to collapse
Thanks I'll give it a try.
Enviado desde mi LG-P500 usando XDA Premium App

Wiping battery stats

Interesting article on Rootzwiki:
Wiping Battery Stats is Pointless, Says Google Jan 13 2012 09:30 PM | Ashley Glenn in Articles
Over time wiping battery stats has become a regular ritual among the Android enthusiast community. Buy a new battery? Wipe your battery stats! Upgrade to a bigger battery? Wipe your battery stats! Change kernels or restore a nandroid backup? You know what to do: wipe battery stats! But this ritual may soon become a thing of the past thanks to Google engineer Dianne Hackborn, who sheds a light on the subject that puts the tightly-held practice of wiping battery stats in the same league as carrying a lucky rabbit's foot or throwing a pinch of spilled salt over your shoulder.
Recommending that users wipe their battery stats appears in so many places and as a cure for so many ills that it has become ubiquitous. Adherents to this practice will sit and wait for their phones to report a full charge, then use an app that deletes the batterystats.bin file or reboot into recovery mode and wipe it from there. This supposedly cures a number of ills such as battery scaling issues, poor battery percentage reporting, and any of a myriad other number of issues. The truth is, according to Android Framework Engineer Dianne Hackborn, that this file is a repository for information about system activity and that it actually takes care of itself without the need for user intervention. From Dianne's post:
Quote
This file is used to maintain, across reboots, low-level data about the kinds of operations the device and your apps are doing between battery changes. That is, it is solely used to compute the blame for battery usage shown in the "Battery Use" UI in settings.
That is, it has deeply significant things like "app X held a wake lock for 2 minutes" and "the screen was on at 60% brightness for 10 minutes."
It has no impact on the current battery level shown to you.
It has no impact on your battery life.
Deleting it is not going to do anything to make your more device more fantastic and wonderful... well, unless you have some deep hatred for seeing anything shown in the battery usage UI. And anyway, it is reset every time you unplug from power with a relatively full charge (thus why the battery usage UI data resets at that point), so this would be a much easier way to make it go away.
It really can't be put more straightforward than that, folks. So rest assured next time you put a new battery in or flash a new kernel or restore an old backup that all you have to do to help your phone or tablet play nice with its battery is charge it to 100% and do nothing else. It really is that simple. But don't worry, enthusiasts - you'll find plenty of other reasons to hang out in recovery anyway.
Know of a sweet app, trick, mod, or hack for your Android device? Send us a tip! [email protected]
Sent from my MB870 using xda premium
This is interesting, so Google engineering will incorporate it into new OTA's? Or does this mean I've wasted time while flashing countless Roms?
Pixelation said:
This is interesting, so Google engineering will incorporate it into new OTA's? Or does this mean I've wasted time while flashing countless Roms?
Click to expand...
Click to collapse
I'm reading this as we've been wasting time.
Sent from my MB870 using xda premium
Not wasting time flashing countless roms. Just wasting time wiping battery stats. That's the way it looks to me. Personally, I've always thought wiping battery stats was nothing but a whole lot of voodoo. Never had the need for it, don't see why anybody else would either. Let the flames begin.
I knew it couldn't possibly have an effect on actual battery life, but I thought maybe the file collected information about the length of the battery to calibrate the meter (because let's face it, with the X2 battery bug it's pretty clear that it doesn't get the value directly from the battery).
Funny thing about calibrating when it gets to 100 though...if there truly is something wrong with the meter, why would you suddenly trust it to know when it's charged? This is why I'd always charge it for a little extra and go by the voltage meter.
So basically, I've seen a couple of different readings. I've always waited past 100% and in different ROMs I've seen 4192, 4196, 4198, & 4200 mah.
I use the extended battery, sooooo readings may vary between regular battery.
Pixelation said:
So basically, I've seen a couple of different readings. I've always waited past 100% and in different ROMs I've seen 4192, 4196, 4198, & 4200 mah.
I use the extended battery, sooooo readings may vary between regular battery.
Click to expand...
Click to collapse
I have an extended battery as well. Actually, I have two extended batteries and two regular batteries. Got the first one with my droid X, then a faulty extended battery (bad batch where the meter doesn't read right), then a replacement extended battery, then the one that came with my X2. No two are the same, but they should all max out near 4200 mV.
Edit: I use one extended battery.
Ok this screen is after install of CM 7 tonight, it reads 4205 mah, so why is it different, with different Roms?
Weird isn't it?
Pixelation said:
Edit: I use one extended battery.
Ok this screen is after install of CM 7 tonight, it reads 4205 mah, so why is it different, with different Roms?
Weird isn't it?
Click to expand...
Click to collapse
The stats can easily drift if you don't flash ROMs with your phone at 100% battery, hence why sometimes the calibration is needed [be sure to wipe stats when at 100% [either via app or recovery], best thing to do is fully discharge battery until auto off occurs and then fully charge with AC Wall Adapter and charge only screen, then when it hits 100% wait a few min, restart to OS to be sure it also says 100% [if not wait until it does and wait about 20 min longer] then restart to recovery and flash away [you could also wipe battery stats as part of flash if you do as stated before flashing]. I usually set it up so I fully discharge the phone [restarting to be sure a couple to few times] and then charge with phone off and charge only screen overnight and flash my ROM first thing in the morning right before I unplug it and unplug once I reach the point I am ready to restart device and do initial boot after flashing. Further details below...
Basically charge to 100% [or as absolutely close as you can get it [AC Wall charger is best unless you REALLY are forced to do it via USB and is best to charge via the charge only screen [phone is powered off and not booted in to the OS and all you normally see is just a battery filling on screen [and is fastest way to charge battery]]. Wait an additional 20 - 30 min after it registers 100% [this is to be sure the battery is absolutely topped off essentially] and I will generally do a restart as sometimes the battery may come back to less than 100% on a restart if your phone is not judging the battery right and is in need of calibration. If it does not register after restart wait until it hits 100% and wait the additional 20 min [you can cut out the initial 20 min wait if you want to do the restart to verify just wait the 20 min once you feel sure battery is as topped off as you can get it], then after wiping restart from recovery and unplug. Now be sure to drain the battery until auto shutoff [either stream media if in a hurry or through general usage. Either way wait until auto shut off.]. I usually will power the device back on and be sure it is not going to get back to the OS [if it even gets to boot logo I wait a few seconds and power it on again to be sure all I get is the boot vibrate on my device [some don't have this, but usually it's tablets almost all phones [and definitely both Motorola and Samsung do this]. I then charge it to full [again AC wall charger recommended as above and again with charge only, but as stated if you cant live with phone off or whatever you can do it with OS running as well. You are free to go as you wish after this second full charge really though if you do a couple more [dont have to be insane] it can help ensure the statistics get a good start.
As I believe I stated above the best way to avoid calibration as long as possible is to charge phone to 100% via phone off screen [with AC Adapter and wait the extra 20 min after it registers full before you flash [I will sometimes take it a step further, leave it plugged in while flashing my install zips and then once I go to restart system for the initial boot after ROM flash I will unplug the charger from the phone.
Hope this helps

battery caliberation

hi
is it required to battery caliberate after flashing new rom?
and when ever i reboot my system either battery jumps from 10% to 30 or more
or becomes less than 10%..
if i should then which app should i use?
any guidnace
plz
TY
No such thing. After you flash a new rom, charge the phone to 100%, turn it off, remove the battery for 30 seconds, replace the battery, turn phone on, enjoy.
Anyone selling you the whole calibration thing is selling you voodoo.
hi
thanks for your reply
plz suggest me best battery app with battery saving feature , suggestion on what we can do with remaining battery , expected full time charge , complete graph or battery usage history by apps?
paid or free , tell me best one
thank you
There's lots of battery apps on Google Play, there's no such thing as the best one, go have a look under the Tools section in Apps (you'll also find some under productivity). Stay away from apps like Juice Defender that claim to save you battery by doing things automatically which you can do yourself in two seconds, these have been proven time & again on XDA to use more juice than they save.
ivl try battery monitor
thank you
No probs ;-)
MistahBungle said:
No such thing. After you flash a new rom, charge the phone to 100%, turn it off, remove the battery for 30 seconds, replace the battery, turn phone on, enjoy.
Anyone selling you the whole calibration thing is selling you voodoo.
Click to expand...
Click to collapse
Wouldn't that procedure above be considered calibrating the battery? LOL. J/K. Couldn't resist .
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
@up
actually it cannot. this way you only help the system in your phone recognize full capacity of battery (which is not even full because not one battery works at it's full capacity - but it's fullest you will get at this point of your battery life). when it's about calibrating - listen to MistahBungle - it's all voodoo. you cannot calibrate li-ion battery unless you kill it and then revive. by killing it I don't mean depleting it in your phone, because even when phone shows the battery is fully depleted it's really not - there is still some juice in it. you'd have to use e.g. special charger which can drawn juice out of battery and make it really empty. only then your battery is dead and useless. you may revive it by applying cca. 5V but actually it not always works. so you cannot calibrate your battery in home environment.
what you can do is "re-calibrating" so called fuel gauge (description under links given below) and you may also help your system recognize the real state of your battery charge. sometimes it happens that systems readings are wrong and battery is on 85% but system is reading it as 50 or 100%. to help it read battery chip correctly you do the thing MistahBungle so helpfully described. sometimes you even don't have to do it but wait 2-3 charging cycles and system will adjust it's reading itself. by charging cycles I mean charging like from 20-100%. why not from 0%? because even if it's not a real depletion state, li-ion batteries doesn't like the state of being discharged too much.
more on this and lot of other helpfull information you will find here:
http://batteryuniversity.com/learn/article/how_to_prolong_lithium_based_batteries
http://www.androidpolice.com/2010/1...bump-charging-and-inconsistent-battery-drain/
gaeilge said:
@up
actually it cannot. this way you only help the system in your phone recognize full capacity of battery (which is not even full because not one battery works at it's full capacity - but it's fullest you will get at this point of your battery life). when it's about calibrating - listen to MistahBungle - it's all voodoo. you cannot calibrate li-ion battery unless you kill it and then revive. by killing it I don't mean depleting it in your phone, because even when phone shows the battery is fully depleted it's really not - there is still some juice in it. you'd have to use e.g. special charger which can drawn juice out of battery and make it really empty. only then your battery is dead and useless. you may revive it by applying cca. 5V but actually it not always works. so you cannot calibrate your battery in home environment.
what you can do is "re-calibrating" so called fuel gauge (description under links given below) and you may also help your system recognize the real state of your battery charge. sometimes it happens that systems readings are wrong and battery is on 85% but system is reading it as 50 or 100%. to help it read battery chip correctly you do the thing MistahBungle so helpfully described. sometimes you even don't have to do it but wait 2-3 charging cycles and system will adjust it's reading itself. by charging cycles I mean charging like from 20-100%. why not from 0%? because even if it's not a real depletion state, li-ion batteries doesn't like the state of being discharged too much.
more on this and lot of other helpfull information you will find here:
http://batteryuniversity.com/learn/article/how_to_prolong_lithium_based_batteries
http://www.androidpolice.com/2010/1...bump-charging-and-inconsistent-battery-drain/
Click to expand...
Click to collapse
read that ..
thank you
and is there any way to stop auto startups of apps?i have around 200apps and most of them i use around once a day or not even once
i use android assistant to manage startup but it does on boot and after some time if i check running apps most of apps will be there running
is there any app to block it running automatically? not just at startup ? full control like anything?
thank you
actually I cannot help with that. I don't use such a software and really don't believe in it. but, the fact is that I do not use so many apps. other fact is that surely there is some useful software that could help you with that task, i just do not use one and personally I'm not interested in it. I know that perhaps the best method is to freeze them with titanium but if you use these apps from time to time then it would become complicated and not worth the effort.
still I have few questions:
why would you like to stop them from working? do they drain your battery? if so then check your logs with bbs and find out which ones are draining, try to change their setting or get rid of them, or at least close only these ones. long time ago I was fighting with some apps that I do not use often and they start themselves from time to time. I didn't want to get rid of them, so before every night I was killing them one-by-one from applications menu (actually most of them didn't wake up until I ran them myself). finally, after many tests I got to the point that it doesn't make any difference. apps I was killing, even if running, didn't use any recourses, didn't produce wakelocks, they were just using some RAM. and if it is the reason of your concern then do not be worried - they may use as much RAM as they want - android will free RAM when it will need it.
now I do not kill any apps and by night I lose 0-2% of battery which is my only concern - what should we care more? CPU, RAM - let it work as long as it doesn't stop us from enjoying our phone and make a usage of it uncomfortable.
and if you're worried about packet data then you may limit it for each app using system menu in ICS.
ancilary said:
read that ..
thank you
and is there any way to stop auto startups of apps?i have around 200apps and most of them i use around once a day or not even once
i use android assistant to manage startup but it does on boot and after some time if i check running apps most of apps will be there running
is there any app to block it running automatically? not just at startup ? full control like anything?
thank you
Click to expand...
Click to collapse
Thanks dude. I also have the similar problem. I have spent months on it without any improvement. Now I'm quite frustrated and not optimistic on the solution you have provided towards my issue, but your decription gives me a lot of clue.
But my problem is even more tricky, I would like to share it here so see if anyone have met it before, or if I need to start a new thread to deal with it:
The problem can be generally decribed as below:
1. When the battery is fully charged, unplug and consume the juice until the level reach around 30%, then the phone is shut down automatically; after I plugin the power and restart the phone, the battery level is displayed as 0%;
2. After charging for a while from 0% , restart the phone and you will see the battery level directly goes back to 50%, but still with very low voltage;
3. Changing with a new battery won't solve the issue -- though the new battery itself may also have problem(not sure if it is genuine), but I don't think a fake battery and an old battery should behave almost the same, so I don't think it is the battery's problem; criticize if I'm wrong
4. Re-flashing a new rom won't solve the issue either. I have tried different CM9 nightlies and now I'm using CM10 nightlies, none of them is immune to the problem;
5. Clear the battery state won't solve the problem. It is hard to say whether it improves the situation at least a tiny bit. I mean it may work somehow, e.g. My phone used to be shut down at 50% battery level and now it can last to 36%. But it never totally solve the problem once and for all, so I still don't trust this caliberation thing may work.
I hope I have clearly stated my issue. I'm so at the end of my patience, this little bastard have been always torturing me You guys are the last I can count on I really hope I came here earlier so as not to have wasted so much time.

Battery gauge going nuts. :/

Hii!
My LG G2 mini D620r is 2 and a half years old, and most of that time everything was ok. But, since two months ago, I noticed that the battery is draining much faster than usual. And also discharge wasn't happening continuously, but it had sam jums i.e. I would use phone for some ammount of time, and the battery gauge would show decrease in capacity of only a couple of percents, and then suddenly it would drop couple of percents more for no reason. Also I noticed that phone wouldn't charge up to the max. It would show that it is 100% full, but after only couple of minutes of idling it would drop to 97%.
After all that I thought that there was a problem with the battery and bought a new one. But it din's solve the problem at all. Problem just continued to apper so I came to conclusion that there was no problem with a battery.
I read somewhere that Android battery gauge can go crazy after certain ammount of time, and my phone in quite old.
So my question is:
Does anyone know what is the solution to the aforementioned problem?
Does this problem have anything with battery gauge?
And if it does, can it be solved by reflashing the stock ROM?
I forgot to mention that I'm using stock Android Lollipop 5.0.2, software version V20b-EUR-xx. Phone is rooted.
kazamat said:
Hii!
My LG G2 mini D620r is 2 and a half years old, and most of that time everything was ok. But, since two months ago, I noticed that the battery is draining much faster than usual. And also discharge wasn't happening continuously, but it had sam jums i.e. I would use phone for some ammount of time, and the battery gauge would show decrease in capacity of only a couple of percents, and then suddenly it would drop couple of percents more for no reason. Also I noticed that phone wouldn't charge up to the max. It would show that it is 100% full, but after only couple of minutes of idling it would drop to 97%.
After all that I thought that there was a problem with the battery and bought a new one. But it din's solve the problem at all. Problem just continued to apper so I came to conclusion that there was no problem with a battery.
I read somewhere that Android battery gauge can go crazy after certain ammount of time, and my phone in quite old.
So my question is:
Does anyone know what is the solution to the aforementioned problem?
Does this problem have anything with battery gauge?
And if it does, can it be solved by reflashing the stock ROM?
I forgot to mention that I'm using stock Android Lollipop 5.0.2, software version V20b-EUR-xx. Phone is rooted.
Click to expand...
Click to collapse
A few options you can try, cuz i had the same problem on my d620r:
- Calibrate your battery;
- Uninstall/rootuninstall bloatware by LG/google, and apps you don't need;
- Use Facebook Lite;
- Use Greenify and Amplify (ideally with xposed framework);
- You can try reflashing stock after full wipe, but i dont think it will fix your problems;
- Best solution > Flash a custom rom and do all the things above.
I didn't have that problem on stock, but on CM13. I was running xposed framework with lots of modules, V4A in the background and a custom kernel, but still, i don't think that was the drainage problem. I'm still using the battery that came with the phone, and flashing Resurrection Remix Nougat 7.1 by mobiusm, governor on ondemand and greenify almost doubled my battery life since cm13!
kasa ssg said:
A few options you can try, cuz i had the same problem on my d620r:
- Calibrate your battery;
- Uninstall/rootuninstall bloatware by LG/google, and apps you don't need;
- Use Facebook Lite;
- Use Greenify and Amplify (ideally with xposed framework);
- You can try reflashing stock after full wipe, but i dont think it will fix your problems;
- Best solution > Flash a custom rom and do all the things above.
I didn't have that problem on stock, but on CM13. I was running xposed framework with lots of modules, V4A in the background and a custom kernel, but still, i don't think that was the drainage problem. I'm still using the battery that came with the phone, and flashing Resurrection Remix Nougat 7.1 by mobiusm, governor on ondemand and greenify almost doubled my battery life since cm13!
Click to expand...
Click to collapse
In september, I flashed CM 13 snapshot from august, and I noticed some bugs with it so I returned to stock Lollipop. I think that's when the problems started. Since then I have used Battery Calibration app (if you know some better apps of that kind please do recommend), installed Greenify, but not Amplify and removed some of the preinstalled LG/Google bloatware, but not all. I do not use Facebook app at all. After all that it came to my mind to do full phone wipe and maybe that would eliminate the problem.
kazamat said:
In september, I flashed CM 13 snapshot from august, and I noticed some bugs with it so I returned to stock Lollipop. I think that's when the problems started. Since then I have used Battery Calibration app (if you know some better apps of that kind please do recommend), installed Greenify, but not Amplify and removed some of the preinstalled LG/Google bloatware, but not all. I do not use Facebook app at all. After all that it came to my mind to do full phone wipe and maybe that would eliminate the problem.
Click to expand...
Click to collapse
I'd still recommend custom rom tho, preferably RR 7.1
And if you don't want a custom rom, make sure you are calibrating your battery correctly. By deleting the batterystats.bin file you dont really calibrate the battery, rather you reset the battery percentage meter. That is important of course, but before using the calibration app, make sure to do these steps:
Preparation: Hard reset the phone, root it again, install greenify (and amplify if you want), uninstall bloatware, charge to 100%. DON'T USE THE PHONE DURING THIS PROCESS FOR BEST RESULTS
1)Download Battery Waster and Battery Calibration from Play Store
2) Turn on battery waster (turn off flashlight option, it heats up the phone, turn on data, location and other battery consuming settings)
3)Drain battery to 0% until phone shuts down by itself.
4)When it shuts down, turn the phone back again for about 5 times
5)After those 5 or so times of turning on, put your phone on a charger without turning on (use wall charger if u can, and please use correct voltage of 5V)
6)When your phone shows full charge, unplug it and turn it on.
7)When you get to the homescreen, if you have less than 100% battery, plug in your charger again (without turning your phone off)
8)When it shows 100%, unplug your phone
9) Turn on battery waster
10) Let it turn off by itself
11) Do steps 4,5,6,7,8 again
12) Launch battery calibration app (root), and press calibrate
13) Restart phone
14) Greenify your apps and enable agressive doze in settings
NOTES: If on step 4 your phone sucessfully boots again without immediately shutting down, just continue draining your battery until it shuts down.
TIP: Keep between 40% and 80% battery
Hopefully your battery is like new again and free of its problems, but again flashing a custom rom other than fixing your battery, might even boost it, and custom kernels might boost it even more! (If configured right, that is).
IF YOU DECIDE TO FLASH A CUSTOM ROM, PLEASE DO THIS REGARDLESS
I hope I helped you!
Thank you very much @kasa ssg!
If this doesn't help, then there's no way to help me at all.
EDIT: Finally I found some time to do a recalibration of my phone's battery, and I think it worked. It definitely lasts longer now than before calibration. Also I returned to my phone's original battery that came with it first time it was bought.

Categories

Resources