I purchased new free buds lite , the left earbuds is not working ,tried to make factory reset the led flashing continuously green red blue then stop -not fixed to the blue led - . But if I removed the left buds from the case and make factory reset for the right one its making successfully . any way that I can make factory reset for boss left & right .
Related
The DIM blue notification light stay on all the time, no matter if i use the phone or it is on standby/sleep.
I tried checking/unchecking all the boxes in the LED settings, no change.
The LED is dim blue, and no matter what i do it won't change.
It stays on even after I shut down the phone.
I removed the battery for about 10 mins, then I soon as i inserted it back in, the LED turned on, same as before.
Has anyone else had this problem before?
no, this does sound weird, but may i suggest a hard reset to see if it will be fixed?
apparently samsung has the hard reset as their primary fix for everything on their support site!
I did the hard reset suing the power+vol up+ home button and after reboot same problem.
I forgot to mention my S3 has its stock firmware rooted, but no other changes made to the firmware.
Hi everybody,
I need help to unbrick my PDA.
If I power on, It shows only the tri-color page of the bootloader but without light and without any text indicating the version of IPL, RADIO, ecc.
If I connect io to the USB charger, the red led flashes, but if I take away the battery while still connected to charger, the red light stays on...
The phone had the No-GSM problem, and was flashed probably with the wrong ROM.
I've tried all the methods shown in the Thread to unbrick Hermes, but noting worked.
I've not read this tipe of brick anywhere.
Can someone please help me?
Many thanks !
Reset SPV M3100
Switch off the SPV M3100, then on the bottom of the phone you have the answer call and end call buttons in clusters of 3 buttons on each side. The Top button on the left is a dash like symbol -- above the windows button, and you have the same dash like symbol button -- on the right above the ok button. You need to hold down both the dash-like symbol buttons and the middle silver button at the same time, then restart the phone. The phone will ask you if you want to reset the entire phone memory and settings back to factory settings and confirm this by using the Query keyboard letter "R". Click R and it will wipe it and set it back to its original settings. Hope this helps. Thanks Pete from www(dot)86plex(dot)com
Hello,
When I speak with somebody I put the call on a "Speaker",
after few seconds its turn off the speaker and I can hear only from the regular speaker (top of the screen).
I try to do a full wipe to a new rom, but its steel happen.
The switch stay green but I can't hear from the back speaker, I press the speaker switch again the can hear again from the back speaker.
There is any idea?!
Thank you !
Up
flash a stock rom and factory reset
Hi,i am new and ned help.I wanted to delete a Google account skype account and all my data on h 2000 + for sale phone.entered the settings back up and restore hit yes and then the phone is entered in recovery mode.displays the android to spin something in the stomach below it flows one blue line and in the left botom writes recovery mode, .It takes about 2-3 seconds and then the phone shuts down.after a few seconds it turns on again and so non-stop.Now the real problem is thet volume up, volume down and mute keys not working, and can not enter the factory settings.Does anyone know if there's another way to open the factory settings or my phone back to normal working.?thanks
Good evening folks,
I am in need of help. I've been having issues with my tab S3 (SM-T820) for the last month or so. I notice that when i let the device charging over night, after i disconnect it, the screen goes black. I know the device is on, since the button lights are active. I've performed forced reboots (holding power + volume down buttons), and screen remains black, but device is on. I've performed hard resets via the odin software and the firmware, and yet the screen remains black (again, device on, button lights on). If i connect the device to a charger, when the screen is black, the screen turns starts displaying a black "speckled" display (black screen with color dots everywhere). When i see that, i start pressing the power button, turning the screen on and off continuously, until i finally get the screen to appear. Problem is that once i turn off the screen (not the device), again the screen will go to black and not appear anymore, until i keep messing with the power button again. I'm finally at lost since i sent the device to squaretrade for warranty support, and they keep sending it back as repaired (all they did was a factory reset, which is what i have done via the Odin software). Any idea on what to try next? I have though about disassembling the device and verifying the display cable is correct, but just seems irrelevant that it could be a hardware issue since eventually the screen does come on again (after trying countless of times), plus, i don't know how to disassemble this thing. Any ideas or recommendations?
Thank you in advance