Its my first time here, and i work with phone's.
First time i have that problem and sorry my english, i'm brazilian guys, i promise, i'm doing my best.
When my client make update in your phone, moto g 7 play (XT1952-2)i dont know why, he told me what when restard your phone, dont turn on more. i want mean, the phone power on, but, he doens't start.
i will describre the error
Start up failed:
your devices didn't start up sucessfully
use the software repair assistant on computer
to repair your device.
connect your device to your computer to get the software repair.
AP fastboot Flash mode (secure)
No bootable A/B slot
Failed to boot linux, falling back to fastboot
Fastboot reason: Fall-through from normal boot mode.
I try make what they say, but i have one trouble....
I donwload the program for repair and driver usb from site da motorola.
install the driver and reboot my computer, when i put my usb in my computer, he dons't install the driver.
Unknown USB device (Device Descriptor Request Failed)
i really dont know what do, i try everything, nothing solved my problem...
athelstanateu said:
Its my first time here, and i work with phone's.
First time i have that problem and sorry my english, i'm brazilian guys, i promise, i'm doing my best.
When my client make update in your phone, moto g 7 play (XT1952-2)i dont know why, he told me what when restard your phone, dont turn on more. i want mean, the phone power on, but, he doens't start.
i will describre the error
Start up failed:
your devices didn't start up sucessfully
use the software repair assistant on computer
to repair your device.
connect your device to your computer to get the software repair.
AP fastboot Flash mode (secure)
No bootable A/B slot
Failed to boot linux, falling back to fastboot
Fastboot reason: Fall-through from normal boot mode.
I try make what they say, but i have one trouble....
I donwload the program for repair and driver usb from site da motorola.
install the driver and reboot my computer, when i put my usb in my computer, he dons't install the driver.
Unknown USB device (Device Descriptor Request Failed)
i really dont know what do, i try everything, nothing solved my problem...
Click to expand...
Click to collapse
You can check here
https://forum.xda-developers.com/g7-play
To see if there are any similar posts.
You installed Moto usb drivers?
https://forum.xda-developers.com/general/rooting-roms/guide-flashing-motorola-firmware-t4042039
You could try Google usb drivers
https://developer.android.com/studio/run/win-usb?hl=vi
Sent from my Moto E (4) using Tapatalk
Download and read the manual for that moto phone. And then try a factory reset. Good luck to you.
sd_shadow said:
You can check here
https://forum.xda-developers.com/g7-play
To see if there are any similar posts.
You installed Moto usb drivers?
https://forum.xda-developers.com/general/rooting-roms/guide-flashing-motorola-firmware-t4042039
You could try Google usb drivers
https://developer.android.com/studio/run/win-usb?hl=vi
I already make all that things and nothing working. i dont know what**** happening, its like, my phone doens't give information about the phone, you know what i mean?
Click to expand...
Click to collapse
Images of device......
athelstanateu said:
Its my first time here, and i work with phone's.
First time i have that problem and sorry my english, i'm brazilian guys, i promise, i'm doing my best.
When my client make update in your phone, moto g 7 play (XT1952-2)i dont know why, he told me what when restard your phone, dont turn on more. i want mean, the phone power on, but, he doens't start.
i will describre the error
Start up failed:
your devices didn't start up sucessfully
use the software repair assistant on computer
to repair your device.
connect your device to your computer to get the software repair.
AP fastboot Flash mode (secure)
No bootable A/B slot
Failed to boot linux, falling back to fastboot
Fastboot reason: Fall-through from normal boot mode.
I try make what they say, but i have one trouble....
I donwload the program for repair and driver usb from site da motorola.
install the driver and reboot my computer, when i put my usb in my computer, he dons't install the driver.
Unknown USB device (Device Descriptor Request Failed)
i really dont know what do, i try everything, nothing solved my problem...
Click to expand...
Click to collapse
Send Images of Describing Problem of given device. And Try to flash it using QPST tool..
But just send your device screenshots indicating on computer..
Just go to device manager, Select given device and go to its details tab and send its "Hardware IDS" Property screenshot here.
I will tell more, what to do when you will reply to me... Hope i will understand your problem and try to resolve it by helping you...:good:
Ashutosh1358 said:
Send Images of Describing Problem of given device. And Try to flash it using QPST tool..
But just send your device screenshots indicating on computer..
Just go to device manager, Select given device and go to its details tab and send its "Hardware IDS" Property screenshot here.
I will tell more, what to do when you will reply to me... Hope i will understand your problem and try to resolve it by helping you...:good:
Click to expand...
Click to collapse
ok, thats is the problem, when i go in my devices in computer, i go where is my connection usb and there is IDS de hardware
USB\DEVICE_DESCRIPTOR_FAILURE
is how i say, its like my phone doens't want give information for my computer, i dont know why, i'm almost give up that **** hahaha
Then just try to update automatically given device by "Update Driver", option . Just tell me what happens..??
Related
Hello I need a solution for this Motorola Atrix.
Error Has Failed to Boot and then off to the second, I can not get over anything with any key combination.
I do not know why try method, even from here in XDA but the PC does not recognize me as I can not enter either the Fastboot.
Appears Failed to Boot and then off very quickly.
With all my soul appreciate if someone can help me, thank you very much to all.
I've charged the battery with a universal charger, and the low battery message disappeared but failed to boot still there
HELP! PLEASE! As I enter fastboot mode? somehow!?
This is not a hardbrick, so please change the title of the topic so as to not confuse others, and next time use proper and accurate terminology.
You need to charge your battery (in a friend's phone or get an external charger), and then use this tool (option 3).
Download link for the tool: http://cleanimport.xda/index.php?threads/1583199/ (bottom of the first post)
Not recognized by USB port, neither recognizes the Script
ravilov said:
This is not a hardbrick, so please change the title of the topic so as to not confuse others, and next time use proper and accurate terminology.
You need to charge your battery (in a friend's phone or get an external charger), and then use this tool (option 3).
Download link for the tool: http://cleanimport.xda/index.php?threads/1583199/ (bottom of the first post)
Click to expand...
Click to collapse
Apparently a HardBrick as I charged the battery to maximum with a universal charger and I can not enter fast boot mode to perform the script. Do not step on that screen and I used all keystrokes, has relieved me telling me not a HardBrick.
I am a relative novice, could you tell me how I apply fruitcake without the need for USB port recognizes the Atrix?
After charging the battery get the same message but without "the battery is too low to flash". Still does not recognize the USB port.
You tell me how do I make the Laptop I recognize your phone? Thank you very much for your concern and response.
Do you have all the proper USB drivers installed? I don't use windows so I don't know about specifics. Search through the forum or through Motorola's site for proper driver download.
Ya lo he intentado todo
ravilov said:
Do you have all the proper USB drivers installed? I don't use windows so I don't know about specifics. Search through the forum or through Motorola's site for proper driver download.
Click to expand...
Click to collapse
I have all the drivers I mentioned in the topic of XDA, entire recipe to make the script but I still did not recognize it. No longer do or key combination to use, nothing more "failed to boot" and "NV Flash" a second before shutting off.
VOL + even left without battery, then connect the battery hold, light it and neither USB nor recognizes the RSD Lite or Script.
I've tried everything with Windows, but I also use Ubuntu, if you know how to make it recognize the USB with any method or any OS I ask that you share.
I'm desperate and do not know what else to try ...
Your going to have to flash back to your old firmware but you will lose root access- samething happen to me so i had a buddy charge my battery than i flashed back to 2.3.6 using RSD lite and i lost my root access but my atrix was back
Sent from my MB860 using xda app-developers app
Fredcho said:
I've tried everything with Windows, but I also use Ubuntu, if you know how to make it recognize the USB with any method or any OS I ask that you share.
Click to expand...
Click to collapse
Linux should recognize the device immediately, there are no drivers required. If yours is not recognized even under Linux, then there's something seriously wrong and I'm clueless. Sorry.
To confirm is the phone recognized under Linux, try running lsusb.
ravilov said:
Linux should recognize the device immediately, there are no drivers required. If yours is not recognized even under Linux, then there's something seriously wrong and I'm clueless. Sorry.
To confirm is the phone recognized under Linux, try running lsusb.
Click to expand...
Click to collapse
Neither Linux recognizes, is that no screen passes Failed to boot, then displays "Entering NV Flash Recovery" and then goes away.
If I leave it in the socket without battery appears EXACTLY the same but with "The battery is too low to flash" (as I show in the picture) and if I leave it attached to the power is not turned off, it stays on but does not pass that screen and I've tried all the combinations.
Please someone help me, is too much money for it to become brick: (
Fredcho said:
Neither Linux recognizes, is that no screen passes Failed to boot, then displays "Entering NV Flash Recovery" and then goes away.
If I leave it in the socket without battery appears EXACTLY the same but with "The battery is too low to flash" (as I show in the picture) and if I leave it attached to the power is not turned off, it stays on but does not pass that screen and I've tried all the combinations.
Please someone help me, is too much money for it to become brick: (
Click to expand...
Click to collapse
Look in the "answers" thread at the top of the forum. If you are lucky, something there might help. Start with soft brick, then try hard brick.
upndwn4par said:
Look in the "answers" thread at the top of the forum. If you are lucky, something there might help. Start with soft brick, then try hard brick.
Click to expand...
Click to collapse
I've seen that a user has been able to relive the HardBrick (Nottach)
I want to know exactly what steps performed to see if I can also try to revive.
I've tried all the key combinations that did made him specifically?
Fredcho said:
I've seen that a user has been able to relive the HardBrick (Nottach)
I want to know exactly what steps performed to see if I can also try to revive.
I've tried all the key combinations that did made him specifically?
Click to expand...
Click to collapse
Sorry, I can't help with that. All I know is what I read in Nottach's post.
Did you try the automated tool that can help recover from a soft brick?
i have the same problem with my atrix.. is there a video on how to fix it?
upndwn4par said:
Sorry, I can't help with that. All I know is what I read in Nottach's post.
Did you try the automated tool that can help recover from a soft brick?
Click to expand...
Click to collapse
Yes, I tried but the computer does not recognize me when I connect the computer USB port and no way to enter fastboot mode.
Well I think that it is hard brick you can try to make a "factory cable" and if only function wher you can go is nvflash then you can try to get new moherboard or try sent to official motorola service.
P.S
In china is some motherboard repair companys but it is expensive.
firecode95 said:
Well I think that it is hard brick you can try to make a "factory cable" and if only function wher you can go is nvflash then you can try to get new moherboard or try sent to official motorola service.
P.S
In china is some motherboard repair companys but it is expensive.
Click to expand...
Click to collapse
Well, it seems a little difficult considering that not much of this cable, some other solution, or is the only thing I have left?
Someone probao something different with success?
Fredcho said:
Yes, I tried but the computer does not recognize me when I connect the computer USB port and no way to enter fastboot mode.
Click to expand...
Click to collapse
If you flash the original rom with RSDlite, it must recognize the phone in the rsd mode even thought that phone just stays in the "failed to boot" state. I had once this problem of not being able to boot and somewhere i read that the phone automatically is in rsd and it really worked.
Try just to power up your phone, open RSDlite and check if it appears in the list, if yes, just flash the correct rom and everything will be fine again.
Good luck
joelorona said:
If you flash the original rom with RSDlite, it must recognize the phone in the rsd mode even thought that phone just stays in the "failed to boot" state. I had once this problem of not being able to boot and somewhere i read that the phone automatically is in rsd and it really worked.
Try just to power up your phone, open RSDlite and check if it appears in the list, if yes, just flash the correct rom and everything will be fine again.
Good luck
Click to expand...
Click to collapse
It does not work because RSD Lite does not recognize it. Anyone else?
someone said we can try to revive our phone by using nvflash. but it has problem that we need SBK! so we have to urge motorola release SBK!
Hi to everyone.....!
Pls read my post and help me to resolve my problem, here my problem is that I'm unable to connect my Xperia u rom jellybean 4.1 v6 full kernel-experimental, to system when I connect my phone to pc it's only charging but my phone internal memory is not getting detected by my pc for a past 3 months I searched Google, xda but nonepost hhelped me and I got sick and tiered of being like this due this I'm unable copy any media files to my device. I tried with more than 7 pc mine's and my friends pc but in none worked I also cleared data of mtp extension services in settings>apps>all but nothing helped,, tried with adb but that also dint work. I tried with sdcard mod app installed in my phone and mounted with mtp and sdcard but nothing happened,tried connecting in fastboot and flashboot but it's not happening bcz while I'm connecting the phone in both fast and flash boots my phone illumination light blowing blue and green for just 3 seconds and phone turning on due to this my pc as well as my friends Pc not detecting in both fastboot as well as in flashboot. I tried with soft and hard reset my phone by following pressing vol up and power button for one vibration for softbrick and 3 vibration for hardreset but still nothing happened. And reinstalled mine's and my friends pc's os xp,Windows 7,8 as well as drivers for my phone fastboot,flashboot, and usbdrivers from both flashtool new and old versions as well as developers.snowmobile.com website but nothing happened finally I went Sony service centre in Chennai basically I'm from chennai. Over there they asked warranty I said it's out of warranty and they said it's board problem that too without checking they said this and asked for payment of 8000 inr, it's 80% of phone cost.I got wexed return my home with tears yes I'm not ashamed to tell this bcz my phone is morethan anything for me and finally I came to conclusion for hardware problem and I writing this in xda with my final hope if here in this forum to none help then I leave it to god.let me ask you devs and friends pls help I'm in great depression not popping out anything in mind was idle. Due to budget problem I'm unable to repair or any new phone. FINALLY MY LOST WORDS IM GREAT FANBOY FOR SONY PRODUCTS ESPECIALLY MOBILES AND TV,THIS MY XPERIA U IS AN MY ONE AND ONLY FIRST SMARTPHONE IT WORKED FOR PAST 1 1/2 YEARS LIKE CHARM BUT NOW THIS THING HAPPENED.I KNOW VERY WELL IN ELECTRONICS ANYTHING HAPPEN AT ANYTIME SO IF I BLAME MY BEST SONY I WILL PUT IN GREAT GILT,I LIKE TO CONVEY MY REQUEST THAT NEAE FUTURE PLS TRY TO STICK WITH SDCARD BCZ IF THIS MTP PROBLEM ARISES THEN BY MAKING USING OF SDCARD WE CAN HAVE CHANCES SONY PLS STICK WITH THAT.IF IT'S THERE THEN I MIGHT HAVE ALTERNATIVE BUT DUE TO MTP IM STUCK,I KNOW THERE MIGHT BE ANY REASON FOR NOT PUTTING SDCARD SLOT IN XPERIA U BUT STILL I REQUEST YOU SONY PLS PUT SDCARD SLOT IN UPCOMING XPERIAS. So finally coming to xda devs and members and friends I REQUEST you one and all to help me with this problem.please help me please help me please help me.THANK YOU ALL DEVS WHO ARE ALL SUPPORTING FOR CUSTOM ROMS,MODS especially DEVSHIFT,MUNJENI,DROIDXTREMER,DIVAKISH,etc.THANK YOU ALL OF THEM PLS CONSIDER THIS AS YOURS PROBLEM AND HELP ME OUT IN THIS.THANK YOU.
Bro try flashing Phantom Kernel 1.0.7 touch version via fastboot......
And you can always transfer files with ADB.Don't give up hope.....
Stock Version: http://www.mediafire.com/?hn20cc3y29n5ce0
CM Version: www.mediafire.com/download/1y9eili64qcc4s9/Phantom[1.0.7]-CM-PowerSaver.zip
AKA#1 said:
Bro try flashing Phantom Kernel 1.0.7 touch version via fastboot......
And you can always transfer files with ADB.Don't give up hope.....
Stock Version: http://www.mediafire.com/?hn20cc3y29n5ce0
CM Version: www.mediafire.com/download/1y9eili64qcc4s9/Phantom[1.0.7]-CM-PowerSaver.zip
Click to expand...
Click to collapse
First of all I wanna thank you from my heart for your kind reply I have tried phantom kernel nothing happened and regarding adb samething nothing working would u help me how to connect in adb pls bro once again thank you
kumar8904 said:
First of all I wanna thank you from my heart for your kind reply I have tried phantom kernel nothing happened and regarding adb samething nothing working would u help me how to connect in adb pls bro once again thank you
Click to expand...
Click to collapse
Usb debugging
I wish to emphasize that flash mode and fastboot should work regardless. Are you using usb 3.0?
I am back. Ignore forum signature 1st line.
Bro AndroidNoob69's right.Please provide details about your
PC Operating System
ROM
USB Port........
AndroidNoob69 said:
Usb debugging
I wish to emphasize that flash mode and fastboot should work regardless. Are you using usb 3.0?
I am back. Ignore forum signature 1st line.
Click to expand...
Click to collapse
im using usb 2.0 port, pc os - windows 7 and mobile rom [UNOFFICIAL] Stock JellyBean 4.1.2 V6 [FULL] by DevSwift1, kernel - first experimental 0.3c and after suggestion phantom
AKA#1 said:
Bro AndroidNoob69's right.Please provide details about your
PC Operating System
ROM
USB Port........
Click to expand...
Click to collapse
pc--- windows 7
mobile-- DevSwift1jellybean v6 full
usb port-- 2.0
AndroidNoob69 said:
Usb debugging
I wish to emphasize that flash mode and fastboot should work regardless. Are you using usb 3.0?
I am back. Ignore forum signature 1st line.
Click to expand...
Click to collapse
i have tried checking ub debugging as well in settings>developers>usb debugging but still no chances and tried with sideload in CMW but nothing happened and tried with usb port 3.0 as well no luck
could you help me to push files through adb i have tried it but still adb pusher mod not working. adb stuck with waiting for device thats it this adb also not detecting my phone
Bro try making a CWM backup and reflash the ROM after triple wipe....I don't know why ADB's stuck.
QUOTE=AKA#1;4714 903 3]Bro try making a CW M b ackup and reflash the ROM aft er triple wipe....I don't know why ADB's stuck.[/QUOTE]
I did everything bro but nothing happened , I installed rom moretha. 5 times by wiping All the Necessar. One
Why don't you flash stock ICS firmware in flashmode(via flashtool)??
Have you tried flashing stock rom with flashtool?
You can also try (re)mounting sdcard in cwm recovery or with adb.
In cwm it's located in mounts and storage --> mount sdcard.
When you connect your phone to pc, do you see that "usb debugging enabled" notification?
If not you have to enable it from developer options. And when you try to do something with adb, does it give any error message, such as "device offline", "device not found" or "waiting for device"?
AKA#1 said:
Why don't you flash stock ICS firmware in flashmode(via flashtool)??
Click to expand...
Click to collapse
bro i already to;d you that iam unable to connect in any mode flashboot and fastboot i had reset soft reset used rubber band trick but nothing happened
MarketMaster said:
Have you tried flashing stock rom with flashtool?
You can also try (re)mounting sdcard in cwm recovery or with adb.
In cwm it's located in mounts and storage --> mount sdcard.
When you connect your phone to pc, do you see that "usb debugging enabled" notification?
If not you have to enable it from developer options. And when you try to do something with adb, does it give any error message, such as "device offline", "device not found" or "waiting for device"?
Click to expand...
Click to collapse
i have tried remounting in cmw but nothing happened about adb none response, there is no error. i have checked usb debugging while connecting with pc in mobile no such words "usb debugging enabled" its just charging thats it nothing more than that
your problem is that ur drivers are crashed because of some weird reason..
Download usb deview at http://www.nirsoft.net/utils/usb_devices_view.html#DownloadLinks
unplug your phone..
now unzip the app and run it..
in the vendor id tab search for drivers having id as - "0fce"
Select ALL of them and uninstall them by right click --> uninstall selected.
remove sony pc companion.
restart your pc..
download latest adb and fastboot drivers here : http://rubenalamina.mx/download/525/
simply run the installer..
default install directory is C:\ADB
now turn off usb debugging and then connect your phone.
let it install mtp drivers.
now download flashtool https://unrestrict.li/flashtool
install the flashtool.
(optional but still recommended) disable antivirus and firewall of pc
go to install directory of flashtool and locate folder "drivers"
open it and run the installer.. you will see a window asking which driver to install check the following items:
-xperia p, u, sola, go, drivers,
-fastboot
-flashtool
when its done unplug turn on usb debugging and go to installed directory of adb, press and hold shift key and then right click anywhere in that folder..
select open command prompt and pass this command:
adb devices
you should see at least one device connected.
if yes you are succeeded and fastboot will work too.
kumar8904 said:
i have tried checking ub debugging as well in settings>developers>usb debugging but still no chances and tried with sideload in CMW but nothing happened and tried with usb port 3.0 as well no luck
could you help me to push files through adb i have tried it but still adb pusher mod not working. adb stuck with waiting for device thats it this adb also not detecting my phone
Click to expand...
Click to collapse
Did you install PROPER DRIVERS?
I am back. Ignore forum signature 1st line.
You need to have excatly the same thing like on picture in attachment! If not than simple download usb drivers from my site http://munjeni.homeunix.com
AD9295 said:
your problem is that ur drivers are crashed because of some weird reason..
Download usb deview at http://www.nirsoft.net/utils/usb_devices_view.html#DownloadLinks
unplug your phone..
now unzip the app and run it..
in the vendor id tab search for drivers having id as - "0fce"
Select ALL of them and uninstall them by right click --> uninstall selected.
remove sony pc companion.
restart your pc..
download latest adb and fastboot drivers here : http://rubenalamina.mx/download/525/
simply run the installer..
default install directory is C:\ADB
now turn off usb debugging and then connect your phone.
let it install mtp drivers.
now download flashtool https://unrestrict.li/flashtool
install the flashtool.
(optional but still recommended) disable antivirus and firewall of pc
go to install directory of flashtool and locate folder "drivers"
open it and run the installer.. you will see a window asking which driver to install check the following items:
-xperia p, u, sola, go, drivers,
-fastboot
-flashtool
when its done unplug turn on usb debugging and go to installed directory of adb, press and hold shift key and then right click anywhere in that folder..
select open command prompt and pass this command:
adb devices
you should see at least one device connected.
if yes you are succeeded and fastboot will work too.
Click to expand...
Click to collapse
bro thanks for your reply and effort for support and yes still im unable to connect my pc i followed every bit clearly as you mention in detail but still no chances. and i cant see 0fce" in vendor id.still i followed everything like adb,flashboot and flashmode drivers,flashtool drivers installed turning on usb debugging every ****ing thing but still no chances brother will you help me?
munjeni said:
You need to have excatly the same thing like on picture in attachment! If not than simple download usb drivers from my site http://munjeni.homeunix.com
Click to expand...
Click to collapse
bro i cant find those sony adb in device manager im using windows 7. i have installed everything but in uninstall and remove tab i cant see sony adb
This may sound silly but two things,
have you tried a different usb port
and is the sdcard mounted in cwm.
I have to make sure the sdcard is mounted before i can connect mine.
Do a hard reset hold power and up till the phone vibrates 3 times then try to connect to flashtool by holding power and volume down.
okay so here is the situation i am currently in.
i have a lg optimus f3 so its called on the tmobile network (lg-p659) as far as i have read on this forum my phone is currently "bricked". Right now what i'm trying to achieve is to get my phone into download mode, but as of far i have tried all button combo's and all the little battery tricks. i can't get my phone to do a damn thing. it just stays on a black screen no led backlight nothing.
Although when i do hook up my phone without the battery i get a prompt to install a driver for a so called "QHSUSB_DLOAD" i can not find the driver for this so when i try to run the KDZ program it fails at the point of trying to connect to the phone.
Please help... Thanks in advanced
EDIT: i no longer require help with this phone, as far as i'm concerned this thread is now dead and im moving on to flashing via ADB
*BUMP* :angel:
blood angte said:
okay so here is the situation i am currently in.
i have a lg optimus f3 so its called on the tmobile network (lg-p659) as far as i have read on this forum my phone is currently "bricked". Right now what i'm trying to achieve is to get my phone into download mode, but as of far i have tried all button combo's and all the little battery tricks. i can't get my phone to do a damn thing. it just stays on a black screen no led backlight nothing.
Although when i do hook up my phone without the battery i get a prompt to install a driver for a so called "QHSUSB_DLOAD" i can not find the driver for this so when i try to run the KDZ program it fails at the point of trying to connect to the phone.
Please help... Thanks in advanced
Click to expand...
Click to collapse
Instructions :-
1.LGUnitedMobileDriver_S50MAN310AP22_ML_WHQL_Ver_3.1 0.1.exe download and install it
2. Download firmware file P65910b_05.kdz
3. Disable antivirus software.
4. Get into emergency mode: power off the phone, press and hold volume up and connected the usb cable..let the device be installed.
5. Open KDZ_FW_UPD.exe.
6. "Type" choose 3GQCT.
7. Choose in "Phonemode": Emergency.
8. Click the folder icon and choose the kdz file.
9. Click Launch software update and play freecell or something on your PC for next few minutes till its done.
10. You are done..now jump and punch the air with your fist and do a wooooohooo!
kishore4 said:
Instructions :-
1.LGUnitedMobileDriver_S50MAN310AP22_ML_WHQL_Ver_3.1 0.1.exe download and install it
2. Download firmware file P65910b_05.kdz
3. Disable antivirus software.
4. Get into emergency mode: power off the phone, press and hold volume up and connected the usb cable..let the device be installed.
5. Open KDZ_FW_UPD.exe.
6. "Type" choose 3GQCT.
7. Choose in "Phonemode": Emergency.
8. Click the folder icon and choose the kdz file.
9. Click Launch software update and play freecell or something on your PC for next few minutes till its done.
10. You are done..now jump and punch the air with your fist and do a wooooohooo!
Click to expand...
Click to collapse
I appreciate the help and the good laugh i had at line 10 but i cannot get my phone into emergency mode. when i tried the button combo and connected the usb it just failed instantly to install and still was not detected on the KDZ program. the device that im getting when i hook up the usb is called "QHSUSB_DLOAD" and even with all the drivers i could ever find none of them would work for this and also not be detected in the program.
Perhaps i need to flash a new recovery img to the phone using abd? i dont know, i'm still learning about all this stuff and slowly getting one step further ahead of the crowd, so to speak.
Maybe JTAG would be your best bet.
blood angte said:
I appreciate the help and the good laugh i had at line 10 but i cannot get my phone into emergency mode. when i tried the button combo and connected the usb it just failed instantly to install and still was not detected on the KDZ program. the device that im getting when i hook up the usb is called "QHSUSB_DLOAD" and even with all the drivers i could ever find none of them would work for this and also not be detected in the program.
Perhaps i need to flash a new recovery img to the phone using abd? i dont know, i'm still learning about all this stuff and slowly getting one step further ahead of the crowd, so to speak.
Click to expand...
Click to collapse
i guess you have windows 8 or 8.1 installed..and you have to turn off the driver signing check first like this tutorial :disabling-signed-driver-enforcement-on-windows-8
and then install this driver :-
Qualcomm-Allx86-drp.exe
try this..n good luck :good:
and yes flashing via adb will be a whole lot better..just do it right...and this "QHSUSB_DLOAD" is usually due to a bad flash so fix it up by flashing properly.
*Closed until further notice*
dyczone said:
Maybe JTAG would be your best bet.
Click to expand...
Click to collapse
yeah i was hoping it would not come down to that... If it is my only option i guess i will find someplace that can do it for me. cause i dont have the hardware to do such a thing none the less even figure out how to do it. other than that i think i might just retire this phone until something else comes up.
Thanks to all the peeps who replied giving info, much kudo's to you guys. :good:
kishore4 said:
i guess you have windows 8 or 8.1 installed..and you have to turn off the driver signing check first like this tutorial :disabling-signed-driver-enforcement-on-windows-8
and then install this driver :-
Qualcomm-Allx86-drp.exe
try this..n good luck :good:
and yes flashing via adb will be a whole lot better..just do it right...and this "QHSUSB_DLOAD" is usually due to a bad flash so fix it up by flashing properly.
Click to expand...
Click to collapse
so i tried the driver pack and it did indeed find the correct driver for my phone although KDZ still wont detect my phone... bummer :crying:
kishore4 said:
and yes flashing via adb will be a whole lot better..just do it right...and this "QHSUSB_DLOAD" is usually due to a bad flash so fix it up by flashing properly.
Click to expand...
Click to collapse
I did not see this the last post i made so i will look into learning how to flash via adb. many thanks good sir, when i return i shall be a master of adb flashing... lol or at least try my best. looking into guides right now on this very fourm. :good:
Any suggestions?
blood angte said:
I did not see this the last post i made so i will look into learning how to flash via adb. many thanks good sir, when i return i shall be a master of adb flashing... lol or at least try my best. looking into guides right now on this very fourm. :good:
Any suggestions?
Click to expand...
Click to collapse
hey..can you get into recovery or your phone is just dead?
well there are two modes for the device :-
1. power off the the phone and then press volume up and plug in the usb cable while doing that -download mode
2. power off the phone and then press power+ volume up button together and quickly plug in the usb the phone goes into emergency mode
try them both
also check in windows manager if any of the LG modems are active..if thats the case then disable them by right click option and then try KDZ updater and see if it works..if not repeat the points 1 and 2 and shake the life out of your device till it gives up and gets detected haha..also try taking battery off and then putting it back and plugging in usb then only.
and about adb i am not sure if it will work but you can always check if the device is being detected by adb using following command :-
adb devices
P.S. -
check in windows device manager the hardware vendor id of the device and then verify if you have it listed in C:\Users\(your username on pc)\.android\adb_usb.ini
if not then add the entry as
# ANDROID 3RD PARTY USB VENDOR ID LIST -- DO NOT EDIT.
# USE 'android update adb' TO GENERATE.
# 1 USB VENDOR ID PER LINE.
0x1949
0x18D1
0x04E8
the vendor is the 4 digits after 0x like mine device id is 04E8..if yours is not listed then add yours in next line and save it and restart computer and plug in ur device again and check if its detected.
In case there is no .android folder or adb_usb.ini file then downloadattachment, unzip and place it on the right location and restart. check the pictures if you dont get what i am saying..just on case lol
Hi all,
by cons for several weeks I've a concern with my redmi Note 2 and I can't find the answer to my problem on the forum or even the Internet.
Since the last update 7.2.2 (global) I have the Recovery MIUI who crushed the TWRP. I changed to test 6.3.17. The update to the .24 went wrong and I don't know why. Since the phone is bootloop. But the problem is that my phone is not recognized by any PC. I tried several PCs, several cables, several drivers, with or without the Fastboot, unable to connect. Therefore impossible to load a new version. I don't think it's material problem because the phone recharge well with a cable to the socket.
Is there another handling or debug decision to restart the phone? I'm in France for information.
thank you in advance if you can point me to a solution !
Hope someone can help me.
Manu
Can the phone boot to miui recovery? If so, you should be able to use miui recovery to flash TWRP (I think you will need one with a signed install zip). You only need to take out the external SD, put it in one of those cheap USB card readers, copy your recovery and ROM to the SD, put it back in the phone, flash TWRP with miui recovery, and then flash the ROM with TWRP (I am assuming that miui recovery can install things from the external SD - if not, then none of this will work).
Hi Bro,
Yes it boot in MIUI recovery but impossible to get access to the SD Card...
I tried to put the file on the SD card but you can't choose the path, I think the recovery will look only in the internal memory ... And as I can't access the internal memory..
I despair !!
Thanks o lot for your help
DarthJabba9 said:
Can the phone boot to miui recovery? If so, you should be able to use miui recovery to flash TWRP (I think you will need one with a signed install zip). You only need to take out the external SD, put it in one of those cheap USB card readers, copy your recovery and ROM to the SD, put it back in the phone, flash TWRP with miui recovery, and then flash the ROM with TWRP (I am assuming that miui recovery can install things from the external SD - if not, then none of this will work).
Click to expand...
Click to collapse
manu33xtro said:
Hi Bro,
Yes it boot in MIUI recovery but impossible to get access to the SD Card...
I tried to put the file on the SD card but you can't choose the path, I think the recovery will look only in the internal memory ... And as I can't access the internal memory..
I despair !!
Thanks o lot for your help
Click to expand...
Click to collapse
Ok - but have you tried the Mediatek SP Flash Tool?
Of course yes but the real problem is that the phone is not recognized by the PC and therefore can't load anything ...
Even changing drivers or cables or PC, nothing to do.
DarthJabba9 said:
Ok - but have you tried the Mediatek SP Flash Tool?
Click to expand...
Click to collapse
manu33xtro said:
Of course yes but the real problem is that the phone is not recognized by the PC and therefore can't load anything ...
Even changing drivers or cables or PC, nothing to do.
Click to expand...
Click to collapse
So, when the battery is removed, and you connect the USB cable, the phone is not even vibrating (and making that weird sound) every couple of seconds or so?
Yes you're right : every 10s the phone vibrate...
DarthJabba9 said:
So, when the battery is removed, and you connect the USB cable, the phone is not even vibrating (and making that weird sound) every couple of seconds or so?
Click to expand...
Click to collapse
manu33xtro said:
Yes you're right : every 10s the phone vibrate...
Click to expand...
Click to collapse
Well, then it is very strange that you can't use the SP Flash Tool. If the phone vibrates, then the device is recognised, and you should be able to flash anything you want with the SP Flash Tool! How exactly were you trying to use the Flash Tool?
I tried so many solutions I really don't know exactly how I used the software.
I will again try everything.
But against any changes when I look in the USB settings of the PC, the phone doesn't appear.
I try again just now, thank you for your help.
DarthJabba9 said:
Well, then it is very strange that you can't use the SP Flash Tool. If the phone vibrates, then the device is recognised, and you should be able to flash anything you want with the SP Flash Tool! How exactly were you trying to use the Flash Tool?
Click to expand...
Click to collapse
manu33xtro said:
I tried so many solutions I really don't know exactly how I used the software.
I will again try everything.
But against any changes when I look in the USB settings of the PC, the phone doesn't appear.
I try again just now, thank you for your help.
Click to expand...
Click to collapse
With the SP Flash Tool, all you need is the correct "scatter" file (MT6795_Android_scatter.txt), and the image(s) that you want to flash. If the phone is vibrating, then the SP Flash Tool should be able to connect to it when you click "Download". Just make sure that you first untick everything that you do NOT want to flash. I would try flashing the boot image (boot.img) first. If that succeeds, then try the TWRP recovery image.
Ok. I'm going to try again with "http://en.miui.com/forum.php?mod=viewthread&tid=196175&highlight=sp%2Btool%2Bflash%2Bredmi%2Bnote%2B2"
DarthJabba9 said:
With the SP Flash Tool, all you need is the correct "scatter" file (MT6795_Android_scatter.txt), and the image(s) that you want to flash. If the phone is vibrating, then the SP Flash Tool should be able to connect to it when you click "Download". Just make sure that you first untick everything that you do NOT want to flash. I would try flashing the boot image (boot.img) first. If that succeeds, then try the TWRP recovery image.
Click to expand...
Click to collapse
Well... Install again drivers MTK but nothing... The phone vibrates well but the PC still doesn't see ... It's late now, I look again tomorrow night.
Thanks again.
manu33xtro said:
Ok. I'm going to try again with "http://en.miui.com/forum.php?mod=viewthread&tid=196175&highlight=sp%2Btool%2Bflash%2Bredmi%2Bnote%2B2"
Click to expand...
Click to collapse
manu33xtro said:
Well... Install again drivers MTK but nothing... The phone vibrates well but the PC still doesn't see ... It's late now, I look again tomorrow night.
Thanks again.
Click to expand...
Click to collapse
Perhaps you might want to describe what exactly happens when do you what exactly?
Hi,
Ok that's what I do with an old PC with Win XP.
- install media Tek USB VCOM drivers for Win XP -> installation complete
- launch SP Flash Tool with administrator rights)
- use scatter file from Redmi Note 2 rom
- use download agent "MTK_AllInOne_DA.bin"
- press download button
- connect phone with UCB cable and waiting... and waiting...
- and I can't see it in device manager !
No way again !
I will try again...
DarthJabba9 said:
Perhaps you might want to describe what exactly happens when do you what exactly?
Click to expand...
Click to collapse
manu33xtro said:
Hi,
Ok that's what I do with an old PC with Win XP.
- install media Tek USB VCOM drivers for Win XP -> installation complete
- launch SP Flash Tool with administrator rights)
- use scatter file from Redmi Note 2 rom
- use download agent "MTK_AllInOne_DA.bin"
- press download button
- connect phone with UCB cable and waiting... and waiting...
- and I can't see it in device manager !
No way again !
I will try again...
Click to expand...
Click to collapse
Strange! I am assuming that when you connect the phone with the USB cable, the battery has been removed from the phone? If so, then it should work.
Perhaps you should try first connecting the phone, and then waiting until it has vibrated once or twice, before clicking the "Download" button?
Yes I removed battery before connect the phone to PC. I tried also with battery and nothing changed.
I even changed the cable to be sure.
Which seems to me most strange is that I see nothing in the device manager, as if the phone wasn't connected. Whatever the installed driver is the same result. I think it should at least have the phone on the COM or USB port ...
I will try again this night to be sure with all steps one by one. And I will also try with ACER tablet I and runs Android 5.1. Maybe it will be recognized.
Otherwise I also tried to pass a Linux PC as a last resort.
Thanks again for your help.
DarthJabba9 said:
Strange! I am assuming that when you connect the phone with the USB cable, the battery has been removed from the phone? If so, then it should work.
Perhaps you should try first connecting the phone, and then waiting until it has vibrated once or twice, before clicking the "Download" button?
Click to expand...
Click to collapse
manu33xtro said:
Yes I removed battery before connect the phone to PC. I tried also with battery and nothing changed.
I even changed the cable to be sure.
Which seems to me most strange is that I see nothing in the device manager, as if the phone wasn't connected. Whatever the installed driver is the same result. I think it should at least have the phone on the COM or USB port ...
Click to expand...
Click to collapse
Yes, it should. The fact that the phone vibrates when connected indicates that the PC and phone are communicating - but it may well be that a low-level driver in the phone has been overwritten (which may mean that this is a lost cause). A final idea - can miui recovery access usbotg?
Hum good question. In fact I don't know. I'll ask the MIUI forum.
I got home late from work so I don't do tests tonight, I'd see it all tomorrow including the connection with my tablet ...
Thanks
DarthJabba9 said:
Yes, it should. The fact that the phone vibrates when connected indicates that the PC and phone are communicating - but it may well be that a low-level driver in the phone has been overwritten (which may mean that this is a lost cause). A final idea - can miui recovery access usbotg?
Click to expand...
Click to collapse
Hi,
I tried to connect with an Acer Tablet with Android 5.1.1 but nothing appends...
I tried also with a Linux PC (Debian) and if I can see a Samsung A3 phone dirrectly, no way for my Redmi Note 2...
There really I despair : I think I can't access any of the phone. Can't do anything !
If you have any other solution but you help me a lot already, and thanks for that.
Can be a micro crack on the USB plug into the phone if it's not a software problem ... Let's go for it apart and look at this ...
Thanks again bro.
Manu
DarthJabba9 said:
Yes, it should. The fact that the phone vibrates when connected indicates that the PC and phone are communicating - but it may well be that a low-level driver in the phone has been overwritten (which may mean that this is a lost cause). A final idea - can miui recovery access usbotg?
Click to expand...
Click to collapse
manu33xtro said:
Hi,
I tried to connect with an Acer Tablet with Android 5.1.1 but nothing appends...
I tried also with a Linux PC (Debian) and if I can see a Samsung A3 phone dirrectly, no way for my Redmi Note 2...
There really I despair : I think I can't access any of the phone. Can't do anything !
If you have any other solution but you help me a lot already, and thanks for that.
Can be a micro crack on the USB plug into the phone if it's not a software problem ... Let's go for it apart and look at this ...
Thanks again bro.
Manu
Click to expand...
Click to collapse
I don't think it is a crack on the USB plug. It seems to me to be a low-level driver problem - ie, the drivers on the phone that are active when the phone is not (fully) booted up. I don't have the right terminology for these drivers, but they are possibly part of the bootloader. If that is the problem, then I don't know how you would solve this problem.
Hello (i know my english is terrible but i need help)
i have bought not long ago BV6000 and i use format option in SPflash tool (not exept bootloader, i pick format all). After this phone is dead. No respond for charging, not respond when i connect him to computer. When i connect phone to computer and push volume + button computer start see phone for 1 second, then again he disappear for +-5 second and next time he start seen and again, again....
Is any method to bring back to life this phone or only producer can help me?
When i format phone i lost IMEI numbers or IMEI should be still saved in phone?
Emik3 said:
Hello (i know my english is terrible but i need help)
i have bought not long ago BV6000 and i use format option in SPflash tool (not exept bootloader, i pick format all). After this phone is dead. No respond for charging, not respond when i connect him to computer. When i connect phone to computer and push volume + button computer start see phone for 1 second, then again he disappear for +-5 second and next time he start seen and again, again....
Is any method to bring back to life this phone or only producer can help me?
When i format phone i lost IMEI numbers or IMEI should be still saved in phone?
Click to expand...
Click to collapse
When you do the volume up thing, in fastboot, do you see your device?
RAZERZDAHACKER said:
When you do the volume up thing, in fastboot, do you see your device?
Click to expand...
Click to collapse
Yes computer see my device but only for 1 second. When i hold volume up all time computer see my device for +-1 second and then my device disappear for +-5 second and then again from begining 1 second see......
When i push volume + for short time, computer see device for 1 second and then device disappear.
And when i try flash my phone by using SPflash tool, proces start and get error at start cause device disappear.
This phone have Android Marshallow.
Oh i read some topics. When i try run device in fastboot mode the device dont turn on, nothing happend.
Emik3 said:
Yes computer see my device but only for 1 second. When i hold volume up all time computer see my device for +-1 second and then my device disappear for +-5 second and then again from begining 1 second see......
When i push volume + for short time, computer see device for 1 second and then device disappear.
And when i try flash my phone by using SPflash tool, proces start and get error at start cause device disappear.
This phone have Android Marshallow.
Oh i read some topics. When i try run device in fastboot mode the device dont turn on, nothing happend.
Click to expand...
Click to collapse
Alright, with this one second, have the "fastboot reboot-bootlaoder" command ready and then, when it sees it, immediately hit enter. Report results.
RAZERZDAHACKER said:
Alright, with this one second, have the "fastboot reboot-bootlaoder" command ready and then, when it sees it, immediately hit enter. Report results.
Click to expand...
Click to collapse
Dam, i cant add picture.
When i try use this command after installing adb i see in cmd waiting on any device and when i connect phone nothig happend, still waiting.
I will try on another computer. I have computer with windows 10, in cmd i have waiting for device after write "fasttboot reboot-bootloader" command but phone is seen like communication port (com 1). Anyway i have instaled drivers for this phone (for normally working, and they are not drivers for this phone on windows 10)
Before i have pick in SPflash tool:
Format--->auto format flash---->format whole flash
so i think bootloader is formated and he need recover or reinstal
On computer with windows 7 is this same but in device menager he see phone named "MTK USB Port" in cmd after use reboot bootloader command cmd all time waiting for device.
I have installed MediaTek PreLoader USB VCOM Port but device dont use this drivers, when i connect the device use MTK USB Port or is added like new port.
Yup, but i dont want firmware update but i need firmware repair cause i get phone with bugged firmware and factory default settings not help.
Blackview BV6000 Flashing Android 7.0
Follow the link below if you wish to #FLASH your #BLACKVIEW #BV6000 with the latest official #Android 7.0 #NOUGAT firmware..
https://dreamworks75.blogspot.in/2017/08/rom-flashing-guide-blackview-bv6000.html