mi 8 lite maybe hard brick - Xiaomi Mi 8 Lite Questions & Answers

hi everyone, i was listening to music and at some point the phone didn't want to turn off the screen, i turned off the phone but it was always restarting in twrp. I tried to install a new costum rom (xiaomi.eu) but the same error reappeared. I turned on the pc and I flashed a stom rom with flash rom. however a red error appeared and it restarted. now the phone no longer goes into flastboot.

It seems that board is damaged and don't accept new writing. Sorry.

persona78 said:
It seems that board is damaged and don't accept new writing. Sorry.
Click to expand...
Click to collapse
smarphone reboot in stock recovery, but fastboot no

Related

[Q] One S Bricked? Won't boot

So I rooted my HTC ONE S (villec2) today, and I wanted to flash a custom rom on it. I got a recovery (turned out to be a bad one, but it worked either way.... I noticed way too late it was made for HTC One M8) I got TWRP 2.7.1.0 and I got it working on my phone. I then backed up the system, and realized I messed up the recovery. In the meantime I got a CM 12.1 img on it and wiped the thing. The wipe removed the old Android system and the CM I downloaded was a bad download. If I go to recovery in the bootloader, it will just do the HTC white screen with "Entering Recovery" and the red warning logo but it won't get anywhere. It's just stuck there. So now, I'm stuck with a device that won't boot normally - just stuck on the white HTC screen, will boot into bootloader, and I want to know if there's a way of accessing the internal storage without being in the operating system. The worst thing is, there's no external SD Card, all just internal... Please god help me. I'm really stressing out about this since it's the only phone I have and if I lose it.... well I'm practically f-ed.... :crying: I know that I messed a few things up really badly and I'm not sure what state the phone is in.
Also just to add, the phone is barely loading up right now. I'm really scared since it's my only phone and it won't even boot normally right now. It's really acting strange, it was on 90% battery but now it might just be dead... i don't know.... someone please help
I honestly think I screwed it up.... All it does now is just a white flash / flicker when I hold the power button (both only power button and vol down) and that's it. I'm really disappointed right now but oh well.... Maybe just because the battery is not charged.... Also been looking around the other threads and looks like a lot of people had the same issue but with 0 replies...
hi friend
i ve bricked a phone once and i recover it with flashing stock rom
did you try the stock rom ?
cazawiman said:
hi friend
i ve bricked a phone once and i recover it with flashing stock rom
did you try the stock rom ?
Click to expand...
Click to collapse
I have no way of trying the stock rom. I cannot access the phone itself because I deleted the OS. There's a weird thing, that if I plug the USB to the computer, it does the connect windows sound but the phone's internal storage is still not accessible.... So as it turns out I can get to the freaking bootloader but then it just turns off with a white flicker a second later.... I have no clue what to do :crying:
try to hook your device with windows and hold the Volume Down and Power
to see if it can detect it
cazawiman said:
try to hook your device with windows and hold the Volume Down and Power
to see if it can detect it
Click to expand...
Click to collapse
Alright. I slept through the night and now I'm here trying to resolve this again. Status now, is that when I try to boot it up, it just shows a white flicker and won't turn on. no matter if i try to boot in bootloader or normally. The device doesn't appear to be charging when I plug it in because it doesn't show the LED light for charging. I think it's hard bricked. I tried other threads, showing bright light to the proximity sensor, but nothing happened.
//edit// - My bootloader was unlocked, and I was on S-ON (HTC ONE S, S3 villec2) that might change on your phone and might make the process different
So I fixed it. I will leave the tutorial for anyone in the future that might be having the same issue. If you "locked yourself out" of your system, eg. no OS, and broken recovery just plug it into the computer, try somehow getting into bootloader, go into fastboot and plug the usb cable to your computer so you're in Fastboot USB. Then you can flash a recovery on the phone using a fastboot command. I believe it's fastboot flash recovery _filename_. Just google that, there'll be plenty. Then you have the recovery and you're back on track. After that you can get the rom you wanted. Just don't make my mistake, and check if your device is exactly the same as the files you're downloading for it. I messed up there . Anyway, good luck everyone!
t
yea
Happy to hear that u have fixed your phone add "solved " to the title and add a fast tutorial for help purpose
Sent from my thl T6 pro using XDA Free mobile app

stuck on elephone logo

The phone told me there was a new update I started to install it, got to reboot and now is just on the elephone logo which comes every 20 sec and goes again. I cannot turn the phone off or do anything with it. Any help please
For me just shut down the phone and then reiniciat the phone ....work for me....
Enviado do meu thor através de Tapatalk
same problem here.. wtf nice update elephone, we cant be the only ones right?
now stuck on logo, restarting every 3 seconds with 100% battery...i m not even sure it will work again if battery is drained out
i can do nothing, no trys to get in factory mode or shut the phone down worked..
stuck on elephone log after upgrade
My elephone P9000 is now cycling the elephone logo every 8 seconds or so after the latest audio upgrade... It will not switch off or do anything else. Did you solve the problem. Or anyone else help. Can you share with me? Thank you.
same problem here.. wtf nice update elephone, we cant be the only ones right?
now stuck on logo, restarting every 3 seconds with 100% battery...i m not even sure it will work again if battery is drained out
i can do nothing, no trys to get in factory mode or shut the phone down worked..
Click to expand...
Click to collapse
so my battery was fully empty now.. i even pressed the power button 100 times after the battery was empty, to make sure all current is out of the phone.
plugged in charger... after 10 seconds phone start itself (after viewing the picture of empty battery) and elephone logo shows short and then back to showing picture of empty batterie cycle. After some minutes, and battery is loaded a little bit, elephone logo cycles again.
So rest in piece my p9000, i can nothing, i cant do anything from my pc because its only starting for like 5 seconds, i cant shut it down because of that and i cant get in factory mode
i am so pissed right now
just wanted to install the new update, everything worked fine like all the times before that and now my phone is ready for the trashcan.
Is there any way to reset the software without getting in factory mode?
Reset from sp flash tools?
Pro4TLZZ said:
Reset from sp flash tools?
Click to expand...
Click to collapse
the phone turns on and off in a cycle of 5 seconds, so that wont work
and i cant stop that cycle.
even if battery is 0% (i even press power button many times so really its drained out). If i recharge it, the cycle starts again without me doing anything. The Power button is not broken or something. it all began after i started new ota update and the phone rebooted like "mkitty" has the same problem it seems
Same for me, I have no idea how to restart my phone. And i dont want to loose all data I have on it.
have you tried to hold the volume up and power at the same time during the restart process to try and force recovery?
xvicedice said:
have you tried to hold the volume up and power at the same time during the restart process to try and force recovery?
Click to expand...
Click to collapse
Hello,
Yes . I have tried that.
I have a list of options that come up on the screen.
I have tried them apart from the wipe data/factory reset.
But it is still the same result.
Thank you for help.
Any more ideas?
what OTA update version did you update?
Simplytouched said:
what OTA update version did you update?
Click to expand...
Click to collapse
It said something about wifi and audio update. I followed the instructions as per a previous update (which worked OK). I never took notice of any version numbers etc.
I have all I need to flash a new rom to the bricked phone but when I connect the off phone to my pc the usb not recognised comes up and I cannot flash the rom to the phone. and yes I have the mediatek vcom drivres install. Why did I buy a Chinese phone elephone p9000 please stay well away from it. on paper is a great phone but in reality does not perform in any sense, battery only lasts 7 hours if I was lucky camera crap, gps works most of the time all that ram and power and t struggles with some videos o dear god. never again. now I cannot even read what I have on the sd cos is formatted for the phone.
juka1 said:
I have all I need to flash a new rom to the bricked phone but when I connect the off phone to my pc the usb not recognised comes up and I cannot flash the rom to the phone. and yes I have the mediatek vcom drivres install. Why did I buy a Chinese phone elephone p9000 please stay well away from it. on paper is a great phone but in reality does not perform in any sense, battery only lasts 7 hours if I was lucky camera crap, gps works most of the time all that ram and power and t struggles with some videos o dear god. never again. now I cannot even read what I have on the sd cos is formatted for the phone.
Click to expand...
Click to collapse
Its actually a great phone. Do you have twrp installed and can you get access to it? You could always boot into twrp transfer over the ROM and install it from there. If you have installed the vcom drivers then when the USB not recognized alert pops up. Go to settings and device manager. Right click the unknown device and click let me pick driver. You should be able to install it from there
The only thing I can suggest is to take the back panel of and unplug the battery. There videos on how to do this if you search YouTube or the forum. Effectively you perform a hard reset of the phone.
If and when you do get it working just twrp installed and do a backup of the whole phone working before performing any future upgrades or Rom changes. Its just better safe then sorry.
thenk you very much for that
The problem is that when I connect the phone on the off to the pc starts again the cycling through the elephone logo so the pc sees the phone for a few seconds in which does not recognises it and then is like the phone goes off until the next cycle so no time to go to device manager and install manually. but thank you for the comment.
removing the battery will void the warranty. I had the phone only since may.
It's unlikely it really matters. Your phone seller not going to take it back or fix it for free just because it's bootlopping. Well they may so just ask them. If you can't get it into recovery then a battery disconnect or contact your seller are your options
thank you
Android-UK said:
It's unlikely it really matters. Your phone seller not going to take it back or fix it for free just because it's bootlopping. Well they may so just ask them. If you can't get it into recovery then a battery disconnect or contact your seller are your options
Click to expand...
Click to collapse
I can get it into recovery mode but I haven't got any software install in the sd card to do a recovery that is why I thought my only option was the sp flashing tool and the room which I have
juka1 said:
I can get it into recovery mode but I haven't got any software install in the sd card to do a recovery that is why I thought my only option was the sp flashing tool and the room which I have
Click to expand...
Click to collapse
Well in that case all you need is a stock rom and yes just flash them with sp tools and it should start booting again. The fact you can get to recovery is a good sign.
Android-UK said:
Well in that case all you need is a stock rom and yes just flash them with sp tools and it should start booting again. The fact you can get to recovery is a good sign.
Click to expand...
Click to collapse
sorry for all of this and thank you very much for your help but when I put the phone in recovery mode by pressing the down volume and power key and connect the phone to the pc it is not recognized by the pc so I can't flash the room

"Broke" Coolpad Torino with TWRP - Help

Helloooo,
I have a big problem, cant get my phone running again.
The sad thing is, I just got it 4 hours ago
So heres what I have done to my Phone:
I rooted it with Kingo-Root and then installed a app where TWRP was listed, there also was CWM and stuff and I thought I have to flash my phone there with TWRP to install a new ROM and stuff and I clicked there on flash.
Then it asked me if I want to restart in, I cant remember recovery and/or download mode, I clicked yes and from there the trouble began.
When it starts the Coolpad Logo appears, then it say "Download and install the package?", to confirm volume up, to abort volume down. If I press abort, it just goes off, the restart may leads to the battery charging screen ( usb cable is always connected!!), if I press volume up, it says "Information - Do not disconnect data cable", but it says it for forever, nothing happens.
If data cable isnt connected, it shows Logo and then goes off, doesnt do anything.
I wish I would have never done that, Im too stupid for stuff like that.
Can someone help me out?
Hopefully
Hi are you able to enter in TWRP recovery in orden to try to flash him back to stock rom ?
Sadly no
I read some stuff on the internet, and tried it:
I installed andoid studio on my PC, with all that drivers, connected the Phone to my PC and looked it up in the device manager.
Before it was just recognized as "Other devices - Android" without any information, now I had the Hardware ID and put that into the setup text of Google drivers and installed them.
My PC somekind recognizes the phone. (but not like normally)
Maybe i can get the Stock Rom to phone that way somehow?
Edit: its called adb interface in device manager
Now I tried to set up the stock-rom via YGDP, and well, it kinda worked.
Im now out of this mode.
If I start the phone it makes its starting sound and it response to "key"-presses by vibrating, but, no screen, its just pitch black.
Its not listed in device-manager anymore.
Any suggestions?
bad support.
Paskebe said:
Now I tried to set up the stock-rom via YGDP, and well, it kinda worked.
Im now out of this mode.
If I start the phone it makes its starting sound and it response to "key"-presses by vibrating, but, no screen, its just pitch black.
Its not listed in device-manager anymore.
Any suggestions?
Click to expand...
Click to collapse
Bad support for this phone...
My is dead after 20 days .
Paskebe said:
Now I tried to set up the stock-rom via YGDP, and well, it kinda worked.
Im now out of this mode.
If I start the phone it makes its starting sound and it response to "key"-presses by vibrating, but, no screen, its just pitch black.
Its not listed in device-manager anymore.
Any suggestions?
Click to expand...
Click to collapse
That is probably because you flash incompatible firmware which does not recognize display of your device .
Search on the internet for another genuine rom and repeat flashing process .
I had alsmost same issue when I flashed Blu Studio D572i with rom of D572a as I remember , was black screan completely but buttons are working (showing light) .

Xiaomi Mi A 1 brick

hello install a custon rom for twpr and when reboot came out in bootloop then I was going to install the stock firware for my flash and the electric light went away and the pause, from there I do not recognize the device in my pc and try to do it of the moden of qualcomm uncovering the phone and I work halfway, I'm desperate and I need help
apart when it turns on it goes out encrypting and it is reinitiated again and again infinitely

Unable to boot

Hello !
So 2-3 months ago I flashed my phone and installed Lineage OS, everything was working perfectly
But today, I was on Snapchat sending a message and my phone turned off for no reason, I tried turning it on, I get the message that my device is untrusted as usual, Sony logo, then it crashes and shutdown.
I tried to boot on recovery mode with TWRP but it won't and crashes.
I also noticed that when I turn on my phone I sometime get a weird pattern on the screen, just like when a GPU is dead on PC.
Anyone has also encountered this problem ? If so, is there a way to fix it ? I don't mind turning back to stock OS as long as it works again.
Thanks for your help !
Alright, so I had some ideas but none of them worked :
- Using XperiaCompanion (Since I unlocked the bootloader it can't help)
- Tried plugging the phone to my pc while holding power down, used ADB, listed devices but it doesn't show up
Is my phone bricked ?
Try flashing stock firmware using Flashtool or Emma.
iH8Ecchi said:
Try flashing stock firmware using Flashtool or Emma.
Click to expand...
Click to collapse
It works ! Thanks a lot, you've just made my day !

Categories

Resources