hi
does there exist stock 6.0.1 minimum without all the bloatware?
TWRP-flashable Deodexed N910FXXU1DRI2 Stock Firmware (and other related files) | XDA Developers Forums (xda-developers.com)
a thread just a few lines below yours.
You can choose to use it as a bare minimum which is almost what i have. Have only a few apps installed. Been using it for a couple of months and am very happy with.
Related
Hi.
I'm not a programer or developer, but an Android enthusiast. I am looking for someone to help me (even payed help) to mode a stock firmware (Orange Hiro - Alcatel One Touch 6012 that run Android 4.2.2 ) in a very special and unusual way.
All I want is to block installing any other apk file on the phone, other than the app I will already install as system app into the modded firmware. I know that is possible since some carriers are already doing this (some US based carriers). There are a few ways you can do this, but I think that simply removing "Applications" part from firmware (or making it invisible or unresponsive) will be the easiest way. Sure, ROM stability is a must.
I hope that I have posted this thread on the right section.
Thank you.
One of our forum friend asked for this, thus sharing with all who may want to go back to EMUI2.0 320dpi and also enjoy the mods by HRT_KangVIP.
HRT_KangVIP claims that the modded files involved r basically similar for both 503L and 501u, thus they r only releasing one cross-flashable version each for both the patch and full rom.
Normal flashing procedures apply for either - your X1 needs to be already on a 4.2.2 EMUI2.0 rom before you proceed, if it is not, flashing official B008 prior for 503L and B020 for 501u is highly recommended if not mandatory.
Patch:
http://www.mediafire.com/download/0nin86y21tt37f4/X1-3G4G-B008_Patch.rar
Full ROM:
http://www.mediafire.com/download/qam1lh846ufx849/X1-3G4G-B008-V1.rar
potatohead said:
One of our forum friend asked for this, thus sharing with all who may want to go back to EMUI2.0 320dpi and also enjoy the mods by HRT_KangVIP.
HRT_KangVIP claims that the modded files involved r basically similar for both 503L and 501u, thus they r only releasing one cross-flashable version each for both the patch and full rom.
Normal flashing procedures apply for either - your X1 needs to be already on a 4.2.2 EMUI2.0 rom before you proceed, if it is not, flashing official B008 prior for 503L and B020 for 501u is highly recommended if not mandatory.
Patch:
http://www.mediafire.com/download/0nin86y21tt37f4/X1-3G4G-B008_Patch.rar
Full ROM:
http://www.mediafire.com/download/qam1lh846ufx849/X1-3G4G-B008-V1.rar
Click to expand...
Click to collapse
Excuse me, What is new in this mod?
Is it smoother than the original one?
What features does it bring?
Hello, I have a new Asus_X550 (the Pegasus 2 Plus), running Android 5.1.1.
Since I bought it in China, there are pieces of it in Chinese, which I don't want. Therefore, I'd like help with *one* of the following, in order of preference (the best being #1)
Can I flash Android 6.* onto it? How? Where can I get a compatible ROM?
Can I flash some other custom ROM? How? I checked, and it doesn't seem to be supported, at least not by CM. I've seen the one article all over the place claiming to do it, but I'm unsure of the legitimacy of the ROM given, esp since the download requires surveys and such.
How can I replace the Chinese app drawer and UI?
Thanks in advance for your help.
1. The are no ROMs with Android 6
2. The are no custom ROMS
3. Obtain a ROOT and you can do this
According to several websites a number of chinese smartphones is infected by pre-installed spyware (just google "adups").
The suspicous apps are named 'com.adups.fota' and 'com.adups.fota.sysoper', critical version numbers are in the range 5.0.3 to 5.3.x.
With the help of "adb shell dumpsys package packages" I analysed my system and found the two critical apps:
com.adups.fota.sysoper: version 5.0.4, last update 2016-06-19 05:25:35
com.adups.fota: version 5.7.0.3.004, 2016-11-16 15:01:06 (updated just a couple of days ago!)
I'm running the latest Android 6.0 stock rom.
I also tried to start a new thread on the zopomobile forum 4 days ago asking Zopo for a confirmation that the phone is not affected by the problem. This thread is still waiting in the "Moderating" section and has not been published up to now - this makes me start to worry ....
Is there a way for a few experienced developers, to clean up this pre-installed spyware, and provide a clean roms !?
The fact that those app are present on stock rom doesn't mean that the system is infected.
Recently, Xiaomi has been accused due to malware installed on miui ROMs and, at the end, the malware was installed by resellers.
So, to make sure, you need info about this supposed malware and analize those app.
I am quite sure that zopo stock rom are clean.
Enviado desde mi Redmi Note 3 mediante Tapatalk
Hello, excuse me for my language certainly unsuitable, I am french and I use Google Traduction.
I own an old Samsung Galaxy S5 SM-G900T ref so T-Mobile, but unlocked any operator that works perfectly.
I would like to use it to do the application tests
I installed with Odin the latest rom available on samfirmware: KLTETMO: G900TUVS1GQA2_G900TTMB1GQA2_G900TUVS1GQA2 so Android 6.0.1
then I installed the Root CF-Auto-Root-kltetmo-kltetmo-smg900t.tar and finally I removed all the unitile applications to have a bare minimum and make it fast enough.
With the application "Phone Info Samsung", I only have the CSC "TMB", normal it is a T-Mobile
The processor is: MSM8974 / MSM8974PRO 32 bit
The GPU is: Qualcomm Adreno 330
The modem is: MSM8974Pro
REV 1.0 Hardware
RAM 2Gb
1080x1920 screen, 5.2 inches, 424ppi, 480dpi
1ST: CSC "TMB" I would like to have a CSC "XEF"?
2EME: I would like deleted this logo T_Mobile (horrible) at the start and stop of the mobile.
3EME: Is it possible to unblock the kernel to install the G900FXXS1CQD rom intended for model SM-G900F European model and so have the CSC "XEF"
In advance, thank you for your answers
cordially
Montero7o said:
Hello, excuse me for my language certainly unsuitable, I am french and I use Google Traduction.
I own an old Samsung Galaxy S5 SM-G900T ref so T-Mobile, but unlocked any operator that works perfectly.
I would like to use it to do the application tests
I installed with Odin the latest rom available on samfirmware: KLTETMO: G900TUVS1GQA2_G900TTMB1GQA2_G900TUVS1GQA2 so Android 6.0.1
then I installed the Root CF-Auto-Root-kltetmo-kltetmo-smg900t.tar and finally I removed all the unitile applications to have a bare minimum and make it fast enough.
it should be relatively easy to use one of the patched versions of odin to change the firmware. i know that 1 of the 3 cscs is permanant. shouldnt really matter in most applications. just search the forum for patched odin. many of the patches ignore the model match check and should flash the F varient you need. also the many hard working devs here have created more than one rom that will leave it barebones and blazing fast as well as install android versions as high as 10
Click to expand...
Click to collapse
it should be relatively easy to use one of the patched versions of odin to change the firmware. i know that 1 of the 3 cscs is permanant. shouldnt really matter in most applications. just search the forum for patched odin. many of the patches ignore the model match check and should flash the F varient you need. also the many hard working devs here have created more than one rom that will leave it barebones and blazing fast as well as install android versions as high as 10.
ps apologies for the reply faux pa
dopeyone2011 said:
it should be relatively easy to use one of the patched versions of odin to change the firmware. i know that 1 of the 3 cscs is permanant. shouldnt really matter in most applications. just search the forum for patched odin. many of the patches ignore the model match check and should flash the F varient you need. also the many hard working devs here have created more than one rom that will leave it barebones and blazing fast as well as install android versions as high as 10.
ps apologies for the reply faux pa
Click to expand...
Click to collapse
Have you done it?