Hi
my box not working when plug its only red led
try to flash diferent firmwares, with UBT several versions and settings - but got errors on 7% time out or 8%
from SD card i got blue led and upgrading screen but its not going anywhere (wait for an hour...)
herer is pictures of the device
Help please is its totally dead?
Related
Hello i have recently updated my ROM but sadly something happened with my service, it just said "no service" and i wasn't able to receive or take any calls so i installed this rom again from the recovery, and then when i rebooted this device, it suddenly stopped on the green goblin logo loading screen and my device was unrecognized by a PC, recovery didn't work... so i tried a RoFUSiON which can install a rom through the pc but my device, as i said, wasn't and isn't recognized anymore. What i can do? i can't even charge it, last night i connected it to the charger and let it on. When i woke up and unplugged it, it had no battery! probably it wasn't chargning, it was discharging, and the only way i can turn my mobile on, is plugging it to the usb, doesn't matter if into the power socket or usb-to-usb, even the screen lights up without the battery but still i can't go to the recovery or fastboot (probably, because as i said my device isn't recognized so either that's the problem either fastboot doesn't work). Here's also the video about this, maybe someone can help me since i don't know what to do.. thanks in advance.
http://www.youtube.com/watch?v=pzUQA-PNI4A
Hi, I have the phone Zopo C2. I turned off the phone and stopped responding. When connected to the charger, nothing happens. When connected to a computer is detect normally, I can flash ROM by SP flashtool. And here is the problem, as long as I want toflash, reaches the first red bar to 100% and ends flash without error. Drivers have a good, first is connected as "USB PORT MTK" and how it comes to 100% red bar that goes in the "VCOM MTK DOWNLOAD".I have a second phone zopo c2 and there I normally flash, and everything goes without problems
I tried with the removed battery inserted, all methods and nothing, always the same 100% red stripe and the end of the flash without any error.
I wanted to flash such proloader same and is the same.
Phone is brick ? Memory in phone is dead or what ?? Can still fix it?
Sorry I from Poland and my english is very bad.
Hi, I know there were many similar topics but this case looks different. I've tried to update my xperia Z using PcCompanion (to newest available kitkat) during flashing i got an error and all I saw after turning it on was grey triangle with warning. PC companion see my phone but cannot repair it (I got error 100), during flashing three different OFW in flashtool it always stucks on kernel or system flashing (excluding them in installation make possible for flashtool to finish the job) It gives constant blue light in fastbot mode but when i'm connecting it in flash mode it only blinks green and then red for a second each and remains black. I can make force shutdown only when it's in charger and being in charger it only blinks with red light and when I want to turn it on it only vibrate once and do and show nothing. It's not rooted, has locked bootloader and battery over 60 % full. Does anyone may help ?
Hello All,
I've got big issue with E5533 device. As I was told device had just turned off suddenly some time ago. I've read something about "sudden death" of Xperia smartphones - after that I've tried to use the 'yellow' reset switch I've found nearby SIM card slot - this does not really help at all. I've tried to power up the phone, it was connected to charger over 12h - after that the icon of low battery still show up, the icon of battery and 'flash' as well. After double-click of power button device showed 'Sony' and 'xperia' logo and after that the black screen appears.
What's more interesting after connecting device to PC - it's available you can see the folders etc, etc.
After that I used Sony Pc Companion and used 'repair' option - same situation - logo and black screen...
I used Flashtool, downloaded the latest 5.1 version of firmware, at first received some issues with BOOT to load - searched on forum and set minimum 128 value of speed.
Firmware flashed successfully - happy to see the results I've started the device using power button - and guess what - logo and black screen again...
I've noticed that phone is starting up after few secs in low light - but seems to reboot after the phase of updating android apps it goes from 0 to 190 and then the screen goes black again... then shows some error I'm unable to read.
Have you got any E5533 stock firmware maybe lower that 5.1 for me to try flash it?
OR have you got an idea what can I do next with this device?
I used this firmware: E5533_29.1.B.0.87_1301-8214_R1A
Also tried this one E5533_29.1.B.0.87_R3A_Customized MAA.ftf - please find logs from last trial attached
i tried to upgrade my m9s pro to kodi 17 via apk file...when i tried to install the apk, the installation failed and my box froze...i waited for like 10-15 mins to see if it comes back to normal...but it remain froze...
I unplugged the power and plugged back in to restart it...and then the box was stuck at red light...BUT BUT BUT...after exactly 15 mins or so, the blue light used to turn on with m9s pro logo...and it remained stuck there...
I tried restarting it for few times but always at the start, it was stuck on red light...then after 15 mins blue light turned on n thn stuck on m9s logo...
I searched on the internet and read somewhere to hold the reset button while plugging in the power...i did that and i went into a screen with green android man and at the bottom there were commands like > formatting data, e: can't mount etc etc...
After those commands the box restarted and ever since, the box stays on red light and it does not shows the blue light even after 15 or 30 mins ...or even an hour....
i wished i would have tried flashing when it was on blue light....but now as it is stuck on red light...need to do something...
I am using the correct firmware - that i am sure...because the firmware mentioned on this firmware for this box, and the firmware my supplier sent is the same.
While flashing i get below errors, Do you have any idea regarding the below error,
[0x10105002]Romcode/Initialize DDR/Read initialize status/USB Control setup error
This error comes at 2% and when i only connect the box with laptop using usb...
And the below error comes when i connect both usb n power cord to box and then connect it to laptop,
uboot/disk intialize/send command/error result
This error comes at 7% when formatting is about to start...
I have tried on windows 7 & 10 laptop + pc....Used almost every version of usb burning tool...the usb cable i am using is 1 metre approx...
Any help will be appreciated....