Related
Hi. I cant power up my xperia 10 mini, i must install on it new rom. How can i install recovery without turned on phone ? Is it possible ?
apricot626 said:
Hi. I cant power up my xperia 10 mini, i must install on it new rom. How can i install recovery without turned on phone ? Is it possible ?
Click to expand...
Click to collapse
Does it react at all when you press the power button? Or is it comletely dead?
SmG67 said:
Does it react at all when you press the power button? Or is it comletely dead?
Click to expand...
Click to collapse
It reacts on everything, just ROM is bad and i need to install new, because this doesn't works. Its not rooted.
Sent from my Wildfire S A510e using XDA Free mobile app
apricot626 said:
It reacts on everything, just ROM is bad and i need to install new, because this doesn't works. Its not rooted.
Sent from my Wildfire S A510e using XDA Free mobile app
Click to expand...
Click to collapse
Start a Repair session in Sony Update Service or PC Companion, this will install the latest official firmware fresh ( you will lose all data ). I don't think there is another option.
If the phone still doesn't work after that i would think you have a hardware problem.
SmG67 said:
Start a Repair session in Sony Update Service or PC Companion, this will install the latest official firmware fresh ( you will lose all data ). I don't think there is another option.
Click to expand...
Click to collapse
I second that. Once you are on working stock, you can install recovery and take it from there.
SmG67 said:
Start a Repair session in Sony Update Service or PC Companion, this will install the latest official firmware fresh ( you will lose all data ). I don't think there is another option.
If the phone still doesn't work after that i would think you have a hardware problem.
Click to expand...
Click to collapse
Soo i just must connect my phone to pc to usb and launch Sony Update Service ? I cant launch rom.
apricot626 said:
Soo i just must connect my phone to pc to usb and launch Sony Update Service ? I cant launch rom.
Click to expand...
Click to collapse
don't connect your phone to the pc
you start Sony Update Service
you choose Update
It can't update, because your phone is not connected and it can't figure out which type it is
It will offer a Repair link
You can choose your model there
It will download the firmware
when it wants to flash the firmware: Press the back-button and plug the usb-cable into your phone ( alternatively: if your phone isn't off, connect the usb-cable and press home- and powerbuttons together ).
Wait till it's done and hope your phone turns on normally.
SmG67 said:
don't connect your phone to the pc
you start Sony Update Service
you choose Update
It can't update, because your phone is not connected and it can't figure out which type it is
It will offer a Repair link
You can choose your model there
It will download the firmware
when it wants to flash the firmware: Press the back-button and plug the usb-cable into your phone ( alternatively: if your phone isn't off, connect the usb-cable and press home- and powerbuttons together ).
Wait till it's done and hope your phone turns on normally.
Click to expand...
Click to collapse
Thanks. I will try this later
SmG67 said:
don't connect your phone to the pc
you start Sony Update Service
you choose Update
It can't update, because your phone is not connected and it can't figure out which type it is
It will offer a Repair link
You can choose your model there
It will download the firmware
when it wants to flash the firmware: Press the back-button and plug the usb-cable into your phone ( alternatively: if your phone isn't off, connect the usb-cable and press home- and powerbuttons together ).
Wait till it's done and hope your phone turns on normally.
Click to expand...
Click to collapse
Update service is just for a few phones and tablets. U20i isnt one of them. so i try PC Companion. i click Support Zone when phone is unplugged and choose U20i. it says connect your phone for step 3(update) but when i connect u20i, it says there is no new update
my phone is 11W31. i cant unlock bootlader. i installed a rom by using cwm. and yesterday i tried to install a rom by using flastool which wants unlock bootloader. and now phone doesnt open, freezes on Sony Ericcson startup screen, help please
burakzeytinci said:
Update service is just for a few phones and tablets. U20i isnt one of them. so i try PC Companion. i click Support Zone when phone is unplugged and choose U20i. it says connect your phone for step 3(update) but when i connect u20i, it says there is no new update
my phone is 11W31. i cant unlock bootlader. i installed a rom by using cwm. and yesterday i tried to install a rom by using flastool which wants unlock bootloader. and now phone doesnt open, freezes on Sony Ericcson startup screen, help please
Click to expand...
Click to collapse
Well.. if you read my post correctly... you shouldn't plug in your phone when it asks for update, leave it disconnected and then it can't recognise your model and assume it's dead, that's when you get a repair option. after that just follow the instructions.
SmG67 said:
Well.. if you read my post correctly... you shouldn't plug in your phone when it asks for update, leave it disconnected and then it can't recognise your model and assume it's dead, that's when you get a repair option. after that just follow the instructions.
Click to expand...
Click to collapse
i open Update Service
i agree license and click start
there isnt my phone u20i so i dont choose any one and click next
it says connect your phone
i connect my phone(my finger on back button)
it says no new update for your phone
burakzeytinci said:
i open Update Service
i agree license and click start
there isnt my phone u20i so i dont choose any one and click next
it says connect your phone
i connect my phone(my finger on back button)
it says no new update for your phone
Click to expand...
Click to collapse
Do it with pc companion, and DO NOT connect your phone when you choose update.
You will get a repair option, it let's you select your model, download the firmware and it wants to flash it to your phone. Then, when it asks for flashmode:
Plug in the USB-cable and then press Home- and Power-buttons together.
Only do that when it asks for flashmode, not before.
SmG67 said:
Do it with pc companion, and DO NOT connect your phone when you choose update.
You will get a repair option, it let's you select your model, download the firmware and it wants to flash it to your phone. Then, when it asks for flashmode:
Plug in the USB-cable and then press Home- and Power-buttons together.
Only do that when it asks for flashmode, not before.
Click to expand...
Click to collapse
i open Sony PC companion
click on Support Zone
click first one, and click repair(phone is not connected)
Continuous
Agree and next
Preparing, agree, next, agree, next
choosed U20i
it asks for connect my phone
i do
There is no update for your phone please try it later
burakzeytinci said:
i open Sony PC companion
click on Support Zone
click first one, and click repair(phone is not connected)
Continuous
Agree and next
Preparing, agree, next, agree, next
choosed U20i
it asks for connect my phone
i do
There is no update for your phone please try it later
Click to expand...
Click to collapse
Try THIS download, put it in the firmwares folder where you installed flashtool and flash it.
(Make sure you don't flash the x10blrelock.ftf under any circumstances, delete it to avoid mistakes)
SmG67 said:
Try /URL] download, put it in the firmwares folder where you installed flashtool and flash it.
(Make sure you don't flash the x10blrelock.ftf under any circumstances, delete it to avoid mistakes)
Click to expand...
Click to collapse
very thanks, it works
SmG67 said:
Try THIS download, put it in the firmwares folder where you installed flashtool and flash it.
(Make sure you don't flash the x10blrelock.ftf under any circumstances, delete it to avoid mistakes)
Click to expand...
Click to collapse
can i install MiniCM7Pro,
it says
Requirements:
- Root
- CWM
- Only 2.1.1.A.0.6 SE Firmware
- Baseband: M76XX-TSNCJOLYM-53404015
My phone
M76XX-TSNCJOLYM-53404006
2.6.29
2.0.A.0.504
burakzeytinci said:
can i install MiniCM7Pro,
it says
Requirements:
- Root
- CWM
- Only 2.1.1.A.0.6 SE Firmware
- Baseband: M76XX-TSNCJOLYM-53404015
My phone
M76XX-TSNCJOLYM-53404006
2.6.29
2.0.A.0.504
Click to expand...
Click to collapse
Do an update with PC Companion first, it should work now I think, because this firmware is unbranded. You need the *4015 baseband, otherwise you will lose connectivity.
SmG67 said:
Do an update with PC Companion first, it should work now I think, because this firmware is unbranded. You need the *4015 baseband, otherwise you will lose connectivity.
Click to expand...
Click to collapse
still cant find a new update,
but this time it shows my phone's name at the top of program and searches automatically for new updates
burakzeytinci said:
still cant find a new update,
but this time it shows my phone's name at the top of program and searches automatically for new updates
Click to expand...
Click to collapse
Check if this firmware already has the *4015 baseband, you should be fine if it does, even if the firmware as a whole is not 2.1.1.A.0.6. Otherwise i'll have to see if I can find something else.
SmG67 said:
Check if this firmware already has the *4015 baseband, you should be fine if it does, even if the firmware as a whole is not 2.1.1.A.0.6. Otherwise i'll have to see if I can find something else.
Click to expand...
Click to collapse
My phone is 53404006 and 2.0.A.0.504.
My Lenovo P780 does not boot any more. Push power button, nothing happened. Connect by usb cable, only red led works. What can I do?
Bought from china, chinaunicomm customed phone. I tried flash, but can not connect it to computer.
bonbonbillo said:
My Lenovo P780 does not boot any more. Push power button, nothing happened. Connect by usb cable, only red led works. What can I do?
Bought from china, chinaunicomm customed phone. I tried flash, but can not connect it to computer.
Click to expand...
Click to collapse
Did u installed p780 drivers into your Pc ?
u must if u want to flash it .
bonbonbillo said:
My Lenovo P780 does not boot any more. Push power button, nothing happened. Connect by usb cable, only red led works. What can I do?
Bought from china, chinaunicomm customed phone. I tried flash, but can not connect it to computer.
Click to expand...
Click to collapse
It's easy to fix Just follow my steps. :fingers-crossed:
1.Prepare the rom which was running ok before,for example, for me it was @satanduck 's prerooted TWRP S124 rom.
2.Open the SP flash tool.
3.Load the scatter file from the rom which worked ok for you.
4.Tick the box that says 'DA DL All With Check Sum'
5.Hit Firmware Upgrade
Now is the hardest step
1.Open the cover of your phone.
2.Look for the red reset button which was close to SD card and press it a few times.
3.Connect USB cable to your phone and firmware upgrade should start and wait for the green circle! :good::laugh:
Best luck :good:
bonbonbillo said:
My Lenovo P780 does not boot any more. Push power button, nothing happened. Connect by usb cable, only red led works. What can I do?
Bought from china, chinaunicomm customed phone. I tried flash, but can not connect it to computer.
Click to expand...
Click to collapse
What have you done to your phone? Did you install or flash something? Did you change something in system ?
Sent from my Lenovo P780 with TWRP 2.7.1.1
glixbourkt said:
Did u installed p780 drivers into your Pc ?
u must if u want to flash it .
Click to expand...
Click to collapse
Yes, I installed mtk usb drivers. but I´m not sure if it´s ok o no. Because I have to connect the battery and push volume+up button to make it connected. and it´ll disappear immediately in device management window.
stympy said:
What have you done to your phone? Did you install or flash something? Did you change something in system ?
Sent from my Lenovo P780 with TWRP 2.7.1.1
Click to expand...
Click to collapse
Just tried to root, but not completed. and then tried flash to rescue, but not yet get it connected to computer.
tngultimate said:
It's easy to fix Just follow my steps. :fingers-crossed:
1.Prepare the rom which was running ok before,for example, for me it was @satanduck 's prerooted TWRP S124 rom.
2.Open the SP flash tool.
3.Load the scatter file from the rom which worked ok for you.
4.Tick the box that says 'DA DL All With Check Sum'
5.Hit Firmware Upgrade
Now is the hardest step
1.Open the cover of your phone.
2.Look for the red reset button which was close to SD card and press it a few times.
3.Connect USB cable to your phone and firmware upgrade should start and wait for the green circle! :good::laugh:
Best luck :good:
Click to expand...
Click to collapse
I can not get it connected to computer. Only when I push volume+up button,and connect the usb cable, it can be found. But then it disappears immediately in device management window. can not continue to flash.
Hi,
Please verify that you have a correct production date. I got a P780 after 0314. please try the solution on this post
http://forum.xda-developers.com/showpost.php?p=52665841&postcount=16
If this resolves your problem, that keep that preloader. With that you can almost flash every rom that there is with the flashtool.
(i'm very satisfied with the latest rom on needrom Vibeui2.0 (the rom page also offers the new preloader )
Greetz,
btw to try to flash with the new preloader set up the flashtool, push the red button on the back of your phone, connect the phone an release the button. If all the drivers are correct your phone will be flashed. ( this new batch phones gave me a heart attack also , mine wasn't even 12 hours active before i softbricked it )
Re-Mi said:
Hi,
Please verify that you have a correct production date. I got a P780 after 0314. please try the solution on this post
http://forum.xda-developers.com/showpost.php?p=52665841&postcount=16
If this resolves your problem, that keep that preloader. With that you can almost flash every rom that there is with the flashtool.
(i'm very satisfied with the latest rom on needrom Vibeui2.0 (the rom page also offers the new preloader )
Greetz,
btw to try to flash with the new preloader set up the flashtool, push the red button on the back of your phone, connect the phone an release the button. If all the drivers are correct your phone will be flashed. ( this new batch phones gave me a heart attack also , mine wasn't even 12 hours active before i softbricked it )
Click to expand...
Click to collapse
When I push the red button, phone can not be recognized by computer. Only I press the volume-up button, it can be recognized by computer.
I start the flash, then push volume-up button to make it connected, but then got BROM error. I attach the screen picture.
bonbonbillo said:
When I push the red button, phone can not be recognized by computer. Only I press the volume-up button, it can be recognized by computer.
I start the flash, then push volume-up button to make it connected, but then got BROM error. I attach the screen picture.
Click to expand...
Click to collapse
You must have this FlashTool - SP_Flash_Tool_v3.1304.0.119. Not Optional.
Check if your phone is produced in 2014. If it is you must use another preloader.
stympy said:
You must have this FlashTool - SP_Flash_Tool_v3.1304.0.119. Not Optional.
Check if your phone is produced in 2014. If it is you must use another preloader.
Click to expand...
Click to collapse
Yes, I have the FlashTool v3.1304.0.119. (picture attached)
My phone is produced before 2014.
bonbonbillo said:
Yes, I have the FlashToll v3.1304.0.119. (picture attached)
My phone is produced before 2014.
Click to expand...
Click to collapse
Try to flash with this Flah Tool, and tell me if gives you new errors.
stympy said:
Try to flash with this Flah Tool, and tell me if gives you new errors.
Click to expand...
Click to collapse
Which one? Have you attached any file? I don't see it. Tks.
bonbonbillo said:
Which one? Have you attached any file? I don't see it. Tks.
Click to expand...
Click to collapse
I have attached now.
Sent from my Lenovo P780 with TWRP 2.7.1.1
stympy said:
I have attached now.
Sent from my Lenovo P780 with TWRP 2.7.1.1
Click to expand...
Click to collapse
Same error, when the red color goes to the end, after around 3 minutes, says brom error....4001
bonbonbillo said:
Same error, when the red color goes to the end, after around 3 minutes, says brom error....4001
Click to expand...
Click to collapse
I think you should go to a service store. Thats my opinion.
stympy said:
I think you should go to a service store. Thats my opinion.
Click to expand...
Click to collapse
Trying to find solution here, not to solve only with money in mobile store. Anybody else help?
bonbonbillo said:
Trying to find solution here, not to solve only with money in mobile store. Anybody else help?
Click to expand...
Click to collapse
I thought you have warranty on your phone !
So... this error appear when you try to flash wrong ROM or you have wrong drivers installed. Try to remove drivers you have installed and try to reinstall another driver.
Orrrr.. your phone could be a clone. Just an ideea ...
Could you tell us more about your phone... maybe pictures taken from battery or box who came with ?
Hi guys
I have problem with my z2 the thing is my USB port is broken so I have been charging throw the magnetic port so I can't use PC anyway I was on exnsz < i splled that wrong rom then I decided to move to candy ROM 10 mins ago so I got gapps and the ROM 300mb was weird
It's says I have to use twrp and I used phill touch recovery I chosed clean install for new ROM then I installed then I got error I wasn't sure if it was error I saw installation complete I installed gapps then rebooted now my z2 won't work I press power button all I get is vibration no led I tried all the buttons power with volume down didnt work
help please i don't know what to do :crying:
BTW my battery was 25%
Bump
Help
Sal7_one said:
Hi guys
I have problem with my z2 the thing is my USB port is broken so I have been charging throw the magnetic port so I can't use PC anyway I was on exnsz < i splled that wrong rom then I decided to move to candy ROM 10 mins ago so I got gapps and the ROM 300mb was weird
It's says I have to use twrp and I used phill touch recovery I chosed clean install for new ROM then I installed then I got error I wasn't sure if it was error I saw installation complete I installed gapps then rebooted now my z2 won't work I press power button all I get is vibration no led I tried all the buttons power with volume down didnt work
help please i don't know what to do :crying:
Click to expand...
Click to collapse
IF your phone doesn't boot you'll need to use USB cable and flashtool or fastboot to recover, but since your usb port is broken i guess there's nothing you can do sorry
I would send the phone to sony service to get the usb port fixed...
Edit: one more thing, candy rom is not stock based and requires an unlocked bootloader, if you didn't unlock your BL before flashing that's why you bricked.... but you could still recover if your phone usb port worked.
ptmaniac said:
IF your phone doesn't boot you'll need to use USB cable and flashtool or fastboot to recover, but since your usb port is broken i guess there's nothing you can do sorry
I would send the phone to sony service to get the usb port fixed...
Edit: one more thing, candy rom is not stock based and requires an unlocked bootloader, if you didn't unlock your BL before flashing that's why you bricked.... but you could still recover if your phone usb port worked.
Click to expand...
Click to collapse
Thank you si much for replaying I will send it I'm an idiot for not seeing unlocked bootloader
I will fix USB and again thanks bro
ptmaniac said:
IF your phone doesn't boot you'll need to use USB cable and flashtool or fastboot to recover, but since your usb port is broken i guess there's nothing you can do sorry
I would send the phone to sony service to get the usb port fixed...
Edit: one more thing, candy rom is not stock based and requires an unlocked bootloader, if you didn't unlock your BL before flashing that's why you bricked.... but you could still recover if your phone usb port worked.
Click to expand...
Click to collapse
Bro I fixed the usb please it's flashing red what do I do
Sal7_one said:
Bro I fixed the usb please it's flashing red what do I do
Click to expand...
Click to collapse
Flashing any stock rom should fix your kernel problem now either flash a .ftf with flashtool, or try recovering your phone in sony pc companion.
I prefer flashtool for flashing as i never had problems with it and it's easy to set-up and work.
If you don't know how to use flashtool take a look at this: http://www.xperiablog.net/2014/06/01/debrand-your-xperia-z2-tutorial/
Hope you get your device fixed :good:
ptmaniac said:
Flashing any stock rom should fix your kernel problem now either flash a .ftf with flashtool, or try recovering your phone in sony pc companion.
I prefer flashtool for flashing as i never had problems with it and it's easy to set-up and work.
If you don't know how to use flashtool take a look at this: http://www.xperiablog.net/2014/06/01/debrand-your-xperia-z2-tutorial/
Hope you get your device fixed :good:
Click to expand...
Click to collapse
You're really awesome iknow how to use flash tool but it's says drivers are not installed and they are and what should I choice from the wipe menu
I solved the problem with the drivers when I try to flash ftf it's says preparing then it's says device disconnected should I put it on fastbot or flash mod
ptmaniac said:
Flashing any stock rom should fix your kernel problem now either flash a .ftf with flashtool, or try recovering your phone in sony pc companion.
I prefer flashtool for flashing as i never had problems with it and it's easy to set-up and work.
If you don't know how to use flashtool take a look at this: http://www.xperiablog.net/2014/06/01/debrand-your-xperia-z2-tutorial/
Hope you get your device fixed :good:
Click to expand...
Click to collapse
I don't know why but my only problem is the device automatically disconnectes from flash tool after a minute I can't flash !!!! Please help
I downloaded sony companinton and update the phone and now the phone turn on and charge only it dosent work
Sal7_one said:
I downloaded sony companinton and update the phone and now the phone turn on and charge only it dosent work
Click to expand...
Click to collapse
Humm weird, try flashtool once again, maybe with another .ftf or another pc, select all wipes, choose flashmode, make sure your phone is completely powered-off, when flashtool asks to connect just keep pressing volume down and plug the usb cable. flashing should start fine now.
ptmaniac said:
Humm weird, try flashtool once again, maybe with another .ftf or another pc, select all wipes, choose flashmode, make sure your phone is completely powered-off, when flashtool asks to connect just keep pressing volume down and plug the usb cable. flashing should start fine now.
Click to expand...
Click to collapse
Nope after 1 minute flash mode turns off automatically soo now here is what I did
Step 1 downloaded sony c s
Step 2 installed supprot
Step3 press update device without contcing to pc
Step 4 chose repair
Step 5 go with it and put it in flash mode
Step 6 before it finishs it will take a long time
Then it will only charge you can't press the power button for some reason
Step 7 go to flash tool start flash mode and it will reboot automatically
Step8 you will be in safe mode go to settings and format the phone
Step 9 it will reboot and into normal mode
Step 10 root through king root and termanil to make it a real root not temporarliy
Step 11 enable usb debugging and install recovery
Step 12 copy the rom from pc to recovery
Step 13 installed the rom everything is amazing except for one problem
I still can't press the power button I don't think it's hardware help me
That's it thanks for everything tell me if you know anything about the power button
@Sal7_one Wow that was way more complicated than it should but i'm glad your phone is working again :good:
Did you open your phone to fix the usb port? or did you send it somewhere? unfortunately the power button situation does seem like hardware problem...
ptmaniac said:
@Sal7_one Wow that was way more complicated than it should but i'm glad your phone is working again :good:
Did you open your phone to fix the usb port? or did you send it somewhere? unfortunately the power button situation does seem like hardware problem...
Click to expand...
Click to collapse
Wtffffffff it's working again. I don't know how bro !!!! I just tested and it's start working again.
But one more problem sim card does not work yes I went to repir it thanks
@Sal7_one humm pwr button working when it wants and sim card problems... that sounds like a bad repair job they probably left a cable / connector loose inside your phone :| i would take it to the same place and make them check / repair the phone again
Hi all,
by cons for several weeks I've a concern with my redmi Note 2 and I can't find the answer to my problem on the forum or even the Internet.
Since the last update 7.2.2 (global) I have the Recovery MIUI who crushed the TWRP. I changed to test 6.3.17. The update to the .24 went wrong and I don't know why. Since the phone is bootloop. But the problem is that my phone is not recognized by any PC. I tried several PCs, several cables, several drivers, with or without the Fastboot, unable to connect. Therefore impossible to load a new version. I don't think it's material problem because the phone recharge well with a cable to the socket.
Is there another handling or debug decision to restart the phone? I'm in France for information.
thank you in advance if you can point me to a solution !
Hope someone can help me.
Manu
Can the phone boot to miui recovery? If so, you should be able to use miui recovery to flash TWRP (I think you will need one with a signed install zip). You only need to take out the external SD, put it in one of those cheap USB card readers, copy your recovery and ROM to the SD, put it back in the phone, flash TWRP with miui recovery, and then flash the ROM with TWRP (I am assuming that miui recovery can install things from the external SD - if not, then none of this will work).
Hi Bro,
Yes it boot in MIUI recovery but impossible to get access to the SD Card...
I tried to put the file on the SD card but you can't choose the path, I think the recovery will look only in the internal memory ... And as I can't access the internal memory..
I despair !!
Thanks o lot for your help
DarthJabba9 said:
Can the phone boot to miui recovery? If so, you should be able to use miui recovery to flash TWRP (I think you will need one with a signed install zip). You only need to take out the external SD, put it in one of those cheap USB card readers, copy your recovery and ROM to the SD, put it back in the phone, flash TWRP with miui recovery, and then flash the ROM with TWRP (I am assuming that miui recovery can install things from the external SD - if not, then none of this will work).
Click to expand...
Click to collapse
manu33xtro said:
Hi Bro,
Yes it boot in MIUI recovery but impossible to get access to the SD Card...
I tried to put the file on the SD card but you can't choose the path, I think the recovery will look only in the internal memory ... And as I can't access the internal memory..
I despair !!
Thanks o lot for your help
Click to expand...
Click to collapse
Ok - but have you tried the Mediatek SP Flash Tool?
Of course yes but the real problem is that the phone is not recognized by the PC and therefore can't load anything ...
Even changing drivers or cables or PC, nothing to do.
DarthJabba9 said:
Ok - but have you tried the Mediatek SP Flash Tool?
Click to expand...
Click to collapse
manu33xtro said:
Of course yes but the real problem is that the phone is not recognized by the PC and therefore can't load anything ...
Even changing drivers or cables or PC, nothing to do.
Click to expand...
Click to collapse
So, when the battery is removed, and you connect the USB cable, the phone is not even vibrating (and making that weird sound) every couple of seconds or so?
Yes you're right : every 10s the phone vibrate...
DarthJabba9 said:
So, when the battery is removed, and you connect the USB cable, the phone is not even vibrating (and making that weird sound) every couple of seconds or so?
Click to expand...
Click to collapse
manu33xtro said:
Yes you're right : every 10s the phone vibrate...
Click to expand...
Click to collapse
Well, then it is very strange that you can't use the SP Flash Tool. If the phone vibrates, then the device is recognised, and you should be able to flash anything you want with the SP Flash Tool! How exactly were you trying to use the Flash Tool?
I tried so many solutions I really don't know exactly how I used the software.
I will again try everything.
But against any changes when I look in the USB settings of the PC, the phone doesn't appear.
I try again just now, thank you for your help.
DarthJabba9 said:
Well, then it is very strange that you can't use the SP Flash Tool. If the phone vibrates, then the device is recognised, and you should be able to flash anything you want with the SP Flash Tool! How exactly were you trying to use the Flash Tool?
Click to expand...
Click to collapse
manu33xtro said:
I tried so many solutions I really don't know exactly how I used the software.
I will again try everything.
But against any changes when I look in the USB settings of the PC, the phone doesn't appear.
I try again just now, thank you for your help.
Click to expand...
Click to collapse
With the SP Flash Tool, all you need is the correct "scatter" file (MT6795_Android_scatter.txt), and the image(s) that you want to flash. If the phone is vibrating, then the SP Flash Tool should be able to connect to it when you click "Download". Just make sure that you first untick everything that you do NOT want to flash. I would try flashing the boot image (boot.img) first. If that succeeds, then try the TWRP recovery image.
Ok. I'm going to try again with "http://en.miui.com/forum.php?mod=viewthread&tid=196175&highlight=sp%2Btool%2Bflash%2Bredmi%2Bnote%2B2"
DarthJabba9 said:
With the SP Flash Tool, all you need is the correct "scatter" file (MT6795_Android_scatter.txt), and the image(s) that you want to flash. If the phone is vibrating, then the SP Flash Tool should be able to connect to it when you click "Download". Just make sure that you first untick everything that you do NOT want to flash. I would try flashing the boot image (boot.img) first. If that succeeds, then try the TWRP recovery image.
Click to expand...
Click to collapse
Well... Install again drivers MTK but nothing... The phone vibrates well but the PC still doesn't see ... It's late now, I look again tomorrow night.
Thanks again.
manu33xtro said:
Ok. I'm going to try again with "http://en.miui.com/forum.php?mod=viewthread&tid=196175&highlight=sp%2Btool%2Bflash%2Bredmi%2Bnote%2B2"
Click to expand...
Click to collapse
manu33xtro said:
Well... Install again drivers MTK but nothing... The phone vibrates well but the PC still doesn't see ... It's late now, I look again tomorrow night.
Thanks again.
Click to expand...
Click to collapse
Perhaps you might want to describe what exactly happens when do you what exactly?
Hi,
Ok that's what I do with an old PC with Win XP.
- install media Tek USB VCOM drivers for Win XP -> installation complete
- launch SP Flash Tool with administrator rights)
- use scatter file from Redmi Note 2 rom
- use download agent "MTK_AllInOne_DA.bin"
- press download button
- connect phone with UCB cable and waiting... and waiting...
- and I can't see it in device manager !
No way again !
I will try again...
DarthJabba9 said:
Perhaps you might want to describe what exactly happens when do you what exactly?
Click to expand...
Click to collapse
manu33xtro said:
Hi,
Ok that's what I do with an old PC with Win XP.
- install media Tek USB VCOM drivers for Win XP -> installation complete
- launch SP Flash Tool with administrator rights)
- use scatter file from Redmi Note 2 rom
- use download agent "MTK_AllInOne_DA.bin"
- press download button
- connect phone with UCB cable and waiting... and waiting...
- and I can't see it in device manager !
No way again !
I will try again...
Click to expand...
Click to collapse
Strange! I am assuming that when you connect the phone with the USB cable, the battery has been removed from the phone? If so, then it should work.
Perhaps you should try first connecting the phone, and then waiting until it has vibrated once or twice, before clicking the "Download" button?
Yes I removed battery before connect the phone to PC. I tried also with battery and nothing changed.
I even changed the cable to be sure.
Which seems to me most strange is that I see nothing in the device manager, as if the phone wasn't connected. Whatever the installed driver is the same result. I think it should at least have the phone on the COM or USB port ...
I will try again this night to be sure with all steps one by one. And I will also try with ACER tablet I and runs Android 5.1. Maybe it will be recognized.
Otherwise I also tried to pass a Linux PC as a last resort.
Thanks again for your help.
DarthJabba9 said:
Strange! I am assuming that when you connect the phone with the USB cable, the battery has been removed from the phone? If so, then it should work.
Perhaps you should try first connecting the phone, and then waiting until it has vibrated once or twice, before clicking the "Download" button?
Click to expand...
Click to collapse
manu33xtro said:
Yes I removed battery before connect the phone to PC. I tried also with battery and nothing changed.
I even changed the cable to be sure.
Which seems to me most strange is that I see nothing in the device manager, as if the phone wasn't connected. Whatever the installed driver is the same result. I think it should at least have the phone on the COM or USB port ...
Click to expand...
Click to collapse
Yes, it should. The fact that the phone vibrates when connected indicates that the PC and phone are communicating - but it may well be that a low-level driver in the phone has been overwritten (which may mean that this is a lost cause). A final idea - can miui recovery access usbotg?
Hum good question. In fact I don't know. I'll ask the MIUI forum.
I got home late from work so I don't do tests tonight, I'd see it all tomorrow including the connection with my tablet ...
Thanks
DarthJabba9 said:
Yes, it should. The fact that the phone vibrates when connected indicates that the PC and phone are communicating - but it may well be that a low-level driver in the phone has been overwritten (which may mean that this is a lost cause). A final idea - can miui recovery access usbotg?
Click to expand...
Click to collapse
Hi,
I tried to connect with an Acer Tablet with Android 5.1.1 but nothing appends...
I tried also with a Linux PC (Debian) and if I can see a Samsung A3 phone dirrectly, no way for my Redmi Note 2...
There really I despair : I think I can't access any of the phone. Can't do anything !
If you have any other solution but you help me a lot already, and thanks for that.
Can be a micro crack on the USB plug into the phone if it's not a software problem ... Let's go for it apart and look at this ...
Thanks again bro.
Manu
DarthJabba9 said:
Yes, it should. The fact that the phone vibrates when connected indicates that the PC and phone are communicating - but it may well be that a low-level driver in the phone has been overwritten (which may mean that this is a lost cause). A final idea - can miui recovery access usbotg?
Click to expand...
Click to collapse
manu33xtro said:
Hi,
I tried to connect with an Acer Tablet with Android 5.1.1 but nothing appends...
I tried also with a Linux PC (Debian) and if I can see a Samsung A3 phone dirrectly, no way for my Redmi Note 2...
There really I despair : I think I can't access any of the phone. Can't do anything !
If you have any other solution but you help me a lot already, and thanks for that.
Can be a micro crack on the USB plug into the phone if it's not a software problem ... Let's go for it apart and look at this ...
Thanks again bro.
Manu
Click to expand...
Click to collapse
I don't think it is a crack on the USB plug. It seems to me to be a low-level driver problem - ie, the drivers on the phone that are active when the phone is not (fully) booted up. I don't have the right terminology for these drivers, but they are possibly part of the bootloader. If that is the problem, then I don't know how you would solve this problem.
FirmwareFinder lists the beta 9 available for my BKL-L09C432, but as the update is not approved for my device I'm unable to install it, neither through VPN nor using in-app proxy . Does anyone know if it's possible to manually install the update?
Thanks.
javier.pc said:
FirmwareFinder lists the beta 9 available for my BKL-L09C432, but as the update is not approved for my device I'm unable to install it, neither through VPN nor using in-app proxy . Does anyone if it's possible to manually install the update?
Thanks.
Click to expand...
Click to collapse
look here https://forum.xda-developers.com/showpost.php?p=77699394&postcount=75
But im back on stock 169 atm waiting for starting official beta to join
Unpack your downloaded file on a computer.
If you see a dload folder :
Copy it to a clean micro-SD card
Power off your phone
Insert the micro-SD in your phone
Hold VOLUME UP, VOLUME DOWN, and POWER
When you see the Huawei/Honor logo, release the three buttons.
If everything went right, the phone should boot in reinstall mode and flash the ROM contained in the dload folder.
If, for some reason, your phone won't stay off and keeps rebooting, it can help to hold down VOLUME DOWN and quickly connect the phone to a computer with a USB cable while the phone is briefly off.
The phone should then boot in fastboot/rescue mode. From here, you may have more success of rebooting into reinstall mode.