Hey,
I wanted to install firmware v 8.0.0.123 C432 with HuRUpdater (https://forum.xda-developers.com/t/...ustomized-hurupdater-for-mediapad-m5.3856312/) and t completely bricked my tablet (black screen). So how can I unbrick it with that testpoint mode? (it is still detected in Windows device manager as USB SER but I installed the driver so now it is HUAWEI USB COM 1.0 (COM3)
Related
Hello,
I have a bricked Zte Nubia Z5s. I'm trying to unbrick it with QPST. But after installing all the drivers, the PC (Windows 7 Ultimate 64-bit) is still unable to detect the device as QHSUSB Dload or USB Diagnostics port or anything like that with a COM port. It detects it as USB Input Device. I have attached photos of how the device looks like when connected and of the drivers that I have installed.
Will anyone please help me ?
And there was no separate thread for the Nubia Z5s so I had to post here.
Hello, I have Allview x1 xtreme mini phone (it's clone of iuni u2). This phone have msm8x74 (probably msm 8274) chipset. My device is hard bricked. When I connect it to PC first time ,I have new qdloader (all partitions was displayed) so I format emmc for booting device in to old qdloader. After that my phone was displayed as ZEUS Flash Device ,and display as compatible driver QDLoader 9008 ,but when I use QDLoader 9008 and QFIL ,application can't find Sahara version (Sahara Version:0) ,when I use ZEUS and S1Tool I have this massage about not supported hardware id and hash. (for QFIL I used prog_emmc_firehose_8974.mbn or prog_emmc_firehose_8936.mbn file and for S1TOOL I used SIN_FILE_SET for C6802 xperia z ultra). Help PLS. Sorry for bad english.
Hi all!
I've just bricked my ZTE KIS 3 (yes, I still have this old phone.. ). I read many topics in the Internet about bricked phones, but I can't unbrick my device. I just dont know how to do it. ;(
So... When I'm plug in my device to PC then Windows sees in Device manager qhsusb_bulk. I've installed drivers and now I see HS-USB qdloader 9008, so it is okay. QPST can connect with phone via COM3 and reports about device is in download mode so it is good too. And now is the question what I can do next?
Open_C upgrade program is not working. ZTE flash tool is not working too. Only QPST is connecting with my device.
Any one can help me and tell step by step what I should to do?
I'm using Win10 but i have PC with Windows XP, where QPST is working fine.
Regards!
Adam
Hi guys,
i have been searching the whole internet but i found no workable solution.
I have hard bricked my Vodafone Tablet Smart 4.
Current status:
- i put the charge cable into the tab, but nothing happens
- i can push any button, but nothing happens
I connected it with the computer and the computer recognized the tab as unknown device (yes, now i could install any driver, e.g. Qualcomm HS-USB QDLoader 9008) for 35 seconds (Debug Mode).
I have tested many possible software solutions (e.g. QcomDloader, Qualcomm Snapdragon Flash Tool, SP-Flash-Tool Version 3.*, 4.*, 5.*).
Now my question:
Is there any way to rewrite a new bootloader/ preloader partition on this tab? Or can i flash a new firmware directly to the Qualcomm CPU?
best regards
Olaf
So I have A T95Q Anroid box wich I'n tryint ot install v9 aidains rom on. I installed win.dows 7 vm then connected my box to the tool but only got recognized for a few seconds then disconneted. The cable that I am using is this one https://ppa-usa.com/product/6ft-usb-2-0-a-male-to-a-male-cable/.
If you use Aml_Burn_Tool, but it doesn't work then your problem may be in device driver. I installed it easily on windows 11.
For more information see this:
Download Amlogic USB Burning Tool latest version 3.2.0 «
chinagadgetsreviews.com