Related
I had on the phone 1600.3013.8107.11502. Then I update to 1600.3015.8107.12070. I did it by the refurbish option in the NCS. One month later i wanted to flash on 1600.3030.8773.12120
When i plug phone, the computer detected it other than ever. I saw Qualcomm CDMA Technologies MSM and removable disk with question about formatting. I clicked cancel but NCS does not detect the phone. My computer couldn't install driver for Qualcomm CDMA Technologies MSM. I tried it on others computers but on all its the same, i can't flash this ****. I was looing for solution on others forums but no one can help with this.
Thx for answers.
You have the Qualcomm bootloader. NCS does not recognize this bootloader. I f you want NCS to recognize your device, you will need the NOKIA DLOAD bootloader. However, the Qualcomm is the unlocked one, so depending on your preferences, you can leave it on the Qualcomm. With the unlocked bootloader (which you have) you will only need an other flashing method. Those can be found on the forums here.
I tried to restore nokia dload bootloader with NSS Beta but this program says my phone dosn't have qualcomm loader...
Looking for phone...Done.
Device: RM-803-NOKIA Lumia 710
Battery status: 91%
Changing phone mode...Done.
Looking for NAND disk...Not found.
Are you sure you have development Qcom loader ?
i have amlmost same problem, but my phone is dead, when i turn it on it stays ond nokia screen
Shuyn18 said:
I tried to restore nokia dload bootloader with NSS Beta but this program says my phone dosn't have qualcomm loader...
Looking for phone...Done.
Device: RM-803-NOKIA Lumia 710
Battery status: 91%
Changing phone mode...Done.
Looking for NAND disk...Not found.
Are you sure you have development Qcom loader ?
Click to expand...
Click to collapse
Your cellphone is working?
I downloaded NSS but it doesn't detect my phone
And if i had the Qualcomm bootloader,How do i go in recovery?
just want to make a nand backup for a friend and root his stock phone.
I own a sgs+ with a custom rom of andoid so i'm noob at wp.
thx,
Shuyn18 said:
I tried to restore nokia dload bootloader with NSS Beta but this program says my phone dosn't have qualcomm loader...
Looking for phone...Done.
Device: RM-803-NOKIA Lumia 710
Battery status: 91%
Changing phone mode...Done.
Looking for NAND disk...Not found.
Are you sure you have development Qcom loader ?
Click to expand...
Click to collapse
If you have this error, please check if the phone restarts in this step or just
stays in Normal mode (windows screen). There are some software versions that
will not respond to the OSBL change command. So just try to flash different
version (via .nb file) and try again.
The other option is the manual restore(hex edit), but its really risky if you don't know
what are you doing.
The problem seems to be caused by version mismatch between the OS and the
baseband firmware. Here the solution and more info.
I also has a problem like: "Are you sure you have development Qcom loader"
when trying to flash rainbow mod FW by lucifer to my lumia 710 using NSS pro v0.48. Does anyone has a same problem with me? all steps that told in http://forum.xda-developers.com/showthread.php?t=1620629 i already been followed. but still i can't flash the FW mod, FYI I already succeed in installing FW with qualcom bootloader before using NSS pro.
Cheers
For those who have the Lumia 710 or 800 are looking for MobileEx v3.5 rev2.2 to flash their DLOAD bootloader to the Qualcomm one.
You can download it from:
MobileEx v3.5 r2.2 : HERE
If you don't know how to use it or what is this program for, please, search the forum or visit our friend google, you can learn many things there
Please, i'm not responsible if something happens to your phone, please, follow a tutorial to know how to use this program.
You will need extra hardware to do it like Advanced turbo flasher
NEW VERSION!! (Thanks to saywa)
MobileEx v3.5 r2.4 : HERE
AdvanceBox Turbo Flasher : HERE
superaken said:
For those who have the Lumia 710 or 800 are looking for MobileEx v3.5 rev2.2 to flash their DLOAD bootloader to the Qualcomm one.
You can download it if you reply with your username so I could send you a private message with the download link or send me a private message.
If you don't know haow to use it or what is this program for, please, search the forum or visit our friend google, you can learn many thisgs there
Click to expand...
Click to collapse
I need it!!! :Q__________
I need it
Please I need it too, sent it to mee, pleaseeeeeeeeeeeeeeeee
Thanks a lot
Omg, i need it
Please send
superaken said:
For those who have the Lumia 710 or 800 are looking for MobileEx v3.5 rev2.2 to flash their DLOAD bootloader to the Qualcomm one.
You can download it if you reply with your username so I could send you a private message with the download link or send me a private message.
If you don't know haow to use it or what is this program for, please, search the forum or visit our friend google, you can learn many thisgs there
Click to expand...
Click to collapse
Thanks in advance
superaken said:
For those who have the Lumia 710 or 800 are looking for MobileEx v3.5 rev2.2 to flash their DLOAD bootloader to the Qualcomm one.
You can download it if you reply with your username so I could send you a private message with the download link or send me a private message.
If you don't know haow to use it or what is this program for, please, search the forum or visit our friend google, you can learn many thisgs there
Click to expand...
Click to collapse
Please send the link to me, I appreciate your help.
Please send me link, thx very much.
me too please!!!:victory:
Does this actually work for the 800?
hey
superaken said:
For those who have the Lumia 710 or 800 are looking for MobileEx v3.5 rev2.2 to flash their DLOAD bootloader to the Qualcomm one.
You can download it if you reply with your username so I could send you a private message with the download link or send me a private message.
If you don't know haow to use it or what is this program for, please, search the forum or visit our friend google, you can learn many thisgs there
Click to expand...
Click to collapse
Yes Please
Send me
Can you please send me a link
mobileEX
Please can you send me the link
I also would like it please
You cant change to Qualcomm on L800 this way. Only L710 supported.
v3.5 revision 2.2, Public-Release
Nokia module updated to version 2.2
added: Qualcomm DLOAD flashing protocol for WP7 devices (Lumia)
added: Qualcomm eMMC Tool
Usefull to work with lumia with unlocked bootloader (Qualcomm DLOAD)
allows to analyze disk & partitions inside lumia eMMC chip
allows to export / import single partitions for firmware hacking
allows to write custom WP7 OS for lumia
allows to restore OSBL to default (Nokia DLOAD)
allows to edit PMM values (Product code, etc)
added: Lumia 710 bootloader unlock
Flashing OSBL with Qualcomm DLOAD enabled, allows to root/jailbreak lumia
With jailbreaked WP7 allows to install app (*.xap) from browser
Click to expand...
Click to collapse
supported/available package for now:
RM-803 (Lumia 710)
HowTo:
- Extract "RM-803_Qualcomm_DLOAD.z" to Product directory "Products\RM-803"
- Choose "Nokia 710 RM-803 Qualcomm DLOAD" on market item
- Flash
- After flashing, change phone mode to "OSBL"
- You will see "Phone detected in "Qualcomm DLOAD" mode, please use eMMC Tool !" and eMMC Tool show up
NOTE: a Mass storage device( Qualcomm MMC Storage USB Device ) will be detected by Windows
and will ask if you want to format, DO NOT ATTEMPT TO FORMAT, click "Cancel"
Install drivers for "Qualcomm CDMA Technologies MSM" with driver from directory "data\drivers\qcusb"
- Download "Full Unlocked" custom OS from here "http://goo.gl/tlzZF"
- Click "Disk Info" to identify connected phone and partitions list
- Click "Write OS", browse to the custom OS file (*.nb)
- Click "Restart" to restart phone to Normal mode
- To restore OSBL back to Nokia DLOAD, use "Restore OSBL"
local definition file def\dcc list updated
minor bug fixed
SL3 Logger updated to version 2.2
minor bug fixed
HTI Misc Tool updated to version 1.3
minor bug fixed
Click to expand...
Click to collapse
this application is totally useless it requires a dongle to use any of the functions. dont go getting your hopes up people
And is free to download from http://www.mxkey.biz/ and if you got the dongle you can do same as NSS or Downloader for free at home. Wast of time.
Is it working on Lumia 800?
Dongle is about 50€, i'm having it for more than 2 years.
I want the link please
You still need soldering solution to swap bootloader.
download the program from here: http://*******/DUrZ4
Hi,
I've been trying to unlock my Lumia 710 from wind and I'm having a few problems.
What I've done.
- I have QUALCOMM bootloader, since I get the format disk popup in windows.
- Flashed WP Rainbow Mod 7.8 Custom Rom: http://forum.xda-developers.com/showthread.php?t=1654415 using Nokia Lumia 710 Downloader (http://forum.xda-developers.com/showthread.php?t=1665821)
- Installed Zune (I guess drivers as well), Nokia Care Suite (WinUSB Drivers for x64), QUALCOMM Drivers (http://forum.xda-developers.com/showthread.php?t=1669498)
- Downloaded NssPro v0.52
- Followed this tutorial to set-up NssPro for WP7: http://forum.xda-developers.com/showthread.php?t=1721355
What's wrong
- When running NssPro, using the detect button the program says phone not found (yes, its in OSBL mode.), and if I click out I get a pop up saying Nokia Care Suite stopped responding and the program crashes.
Images:
- Phone not Found: http://i.imgur.com/bmcAI.png
- Crashed: http://i.imgur.com/j4Efn.png
I'm running Windows 8 x64.
If anyone could point out what I'm doing wrong would be great.
Thanks,
Karn.
I have your same problem and posted here a question but no one answer me
i hope some one can help us
mine was a orange brand lumia
now i have a raimbow mod
finally i figure out
the problem is on QUALCOMM Drivers
you don't have to install notting just put inside nss pro the correct driver
i don't know if i can post files or other
if cannot send me a pm and i send you a link
i successfull sim unlocked my 710 but now even if
i have network coverage when i try to call it disconnect the call
Hey,
Could you explain this to me in detail.
Thanks.
Ariakan said:
finally i figure out
the problem is on QUALCOMM Drivers
you don't have to install notting just put inside nss pro the correct driver
i don't know if i can post files or other
if cannot send me a pm and i send you a link
i successfull sim unlocked my 710 but now even if
i have network coverage when i try to call it disconnect the call
Click to expand...
Click to collapse
run it in administrator mode and compatibility windows 7.
Dear XDA community,
everyday i'm reading new questions from users, how they have to unlock their Lumia 800 and how they can flash custom roms onto it...
So i decided to make this how-to-thread.
I'll keep this post updated as an overview:
post 2: Bootloader unlock DLOAD Lumia 800 to Qualcomm
post 3: Backup and flash your L800 with Ubuntu, flash in Windows using dewe's Lumia Downloader 0.5
post 4: How-To use USB-Video-Out
So please, guys, read this thread, and if you don't understand, feel free to ask. :good:
Bootloader unlock DLOAD Lumia 800 to Qualcomm
If you want to flash a custom rom, you need to have a Lumia 800 with qualcomm bootloader.
But it's a difficult way to make your DLOAD Lumia 800 to Qualcomm:
You need two main things:
1. You need ATF flasher box
2. You need good soldering skills or the special atf cables from gpg industries
Here's a tutorial to SIM-Unlock a Lumia 800: How-To SIM-Unlock your Lumia 800 - gsmhosting.com
This is almost the same procedure for "bootloader-unlocking" your Lumia 800.
You just do not need to click SP-Unlock, you need to click "boot repair" (and select qualcomm, of course).
Here's the thread of the special cables: No more soldering for lumia 610,710,800,900 easiest osbl swap ever
These cables do not require you to solder your device. You only need to open up your phone and connect it to the cable and your ATF Box.
So, if you don't want, or can't buy such a box, check for a local phone repair shop in your town/city. If they have ATF, i'm sure they can do this for you for a small amount.
Hope this helps.
Flash your custom rom using dewe's Lumia Downloader 0.5
Dewe's Nokia Lumia Downloader 0.5
I attached the Nokia Lumia Downloader 0.5 for flashing your Lumia 800 easily in Windows.
Thx to dewe for his great work!
This requires your Lumia 800 to have the qualcomm bootloader!!
First: make a backup of ALL 9 partitions of the phone!
This might really save your ass Id did save mine more than once :good:
1. Install Ubuntu to your computer, or use Ubuntu-Live-CD
2. put phone into "Qualcomm Mode" by pressing VOL UP + POWER and connect it to your pc
3. check with
Code:
sudo fdisk -l
how your phone appears in ubuntu
4. backup your partitions using this:
Code:
sudo dd if=/dev/sd[B]X[/B]1 of=/media/Data/backup1.bin
sudo dd if=/dev/sd[B]X[/B]2 of=/media/Data/backup2.bin
sudo dd if=/dev/sd[B]X[/B]3 of=/media/Data/backup3.bin
up to
sudo dd if=/dev/sd[B]X[/B]9 of=/media/Data/backup9.bin
where the X is your special letter, mostly it's b, c, or d.
if = your input file
of = your output file
And this might take up to 2 hours.
Restoring your backups is the exact opposit.
second: you can now flash your Lumia 800.
because you're already in Ubuntu, you can flash it using:
Code:
sudo dd if=/path/to/your/os-new.nb of=/dev/sd[B]X[/B]9
You MUST flash the os-new.nb file to partition 9!!!
Or you can use attached Nokia Lumia Downloader on Windows.
1. Connect your phone in "qualcomm mode"
2. open the Tool with admin rights in Windows
3. Klick "download" and select os-new.nb file
NOTICE: when you connect the phone in "qualcomm mode" in windows, you'll get a message of formatting the drive. DO NOT DO THAT!!!! CLICK CANCEL! If you format, your phone's broken.
How-To use USB-Video-Out
How to use USB Video Out:
As it seems to be a little "difficult" to use the usb video out package, here's what you have to do (this is a copy out of the readme file of the package):
You can download the needed files here:
USB-Video-Out.rar
Mirror @4shared
Enabling USB video out on the phone (ON THE PHONE)
- From Start Menu swipe over to the application list and run "USB Video Out"
- Answer Yes to enable USB Video out. This is a toggle.
- When the phone boots up it is in Zune Mode which enables it to sync data with Zune Client software on the PC. You will need to toggle this to Video mode using the above steps to get video out.
- Note: Toggling between Zune mode and Video mode requires the phone to reboot each time.
Setting up driver on the desktop (one time)
- Make sure Zune is not running.
- Your Phone must be flashed with a ROM that has video out bits on it, they must be enabled, and the phone must be on and plugged into your PC to continue. When the phone boots up the default setting is OFF for the video output.
- Start -> Right click on Computer, select Manage
- In "Computer Management" click on the Device Manager
- Under "Other Devices"
- Within the list of drivers Right Click on WM7VIDSTREAM driver, select "Update Driver Software..."
- Choose Browse and point Windows to appropriate driver folder.
- Approve the Unsigned Driver installation.
Starting application
- Launch VidStream.exe.
- This application does support disconnect & reconnecting of the phone's USB cable.
- If a previous instance of VidStream.exe was running with the device connected, you will need to simply unplug and replug the phone's USB cable.
- Press ESC to exit the PC Client application.
Re-enabling MTPz USB sync (Zune Mode)
- Open "USB Video Out"
- Answer Yes to enable MTPz
- The device will reboot to make the changes effective.
Click to expand...
Click to collapse
Oh, I was about to write that I'm flashing my phone on Windows but then I saw this method below the Ubuntu.
Isn't it better to put the windows method above the ubuntu? I think more ppl use Windows and possibly won't se the windows method as me
Paviano said:
Oh, I was about to write that I'm flashing my phone on Windows but then I saw this method below the Ubuntu.
Isn't it better to put the windows method above the ubuntu? I think more ppl use Windows and possibly won't se the windows method as me
Click to expand...
Click to collapse
Hi, thx for reply, i wrote it this way, because i wanted to point out, that it is really recommended to make a backup.
If i put the windows flashing above, most people will stop reading, and don't make a backup
I think this way, more people read the backup story, so it's their choice if they don't make one
Zune
Hey thanks for this tutorial. I just had one quick question.
After I do this can I still sync with Zune? Because I would like my data such as songs and apps back. Is this still possible?
if i got for it, it will cost me about 12000 Pakistani rupee for ATF, and about 4000 Pakistani rupee for cable............total 16000, and i can buys with this + sale price of my cell = samsung s#........my GOD....where i am
Good bye to lumia 800....wanna get rid off
bowi1612 said:
Hey thanks for this tutorial. I just had one quick question.
After I do this can I still sync with Zune? Because I would like my data such as songs and apps back. Is this still possible?
Click to expand...
Click to collapse
Hi there,
sorry for late reply.
I you mean with "doing this" unlocking your bootloader, syncing data does not really have anything to do with your bootloader.
Generally, if you make your DLOAD to Qualcomm, your personal files are still on your phone, as bootloader changing does not overwrite any personal files (partition 9 of the phone).
It matters more, which rom you install, if syncing content with zune is still possible or not.
If you flash a custom rom, your data is whiped, as you overwrite your OS partition with the custom rom. But after that, with my roms for example, you can sync your songs etc. back to your Lumia.
I don't think this might work with apps, you have to install them again via marketplace.
Is it possible to use your ROMs on N9?
Is it possible to use your ROMs on Nokia N9? If yes how?
with regards
hrbani said:
Is it possible to use your ROMs on Nokia N9? If yes how?
with regards
Click to expand...
Click to collapse
Is this a serious question??
mate... N9 is a totally different phone, this will NOT work!
Thanks. I'm amateur and know noting about ROM port and others, I asked that question because I want win phone on my N9 .
with regards
Bootloader unlock DLOAD to Qualcomm L800
If I do Bootloader unlock DLOAD to Qualcomm L800 using ATF NITRO ...
do this make any changes on my ROM..?
will this make my phone data wiped...?
and do i need any kind of flash files for this
saddam.khan999 said:
If I do Bootloader unlock DLOAD to Qualcomm L800 using ATF NITRO ...
do this make any changes on my ROM..?
will this make my phone data wiped...?
and do i need any kind of flash files for this
Click to expand...
Click to collapse
Hi there,
no, this only overwrites your bootloader, which is on a different partition as the phone operating system.
so this will not wipe your phone data.
just flashing a custom rom will wipe your data.
Remove Funkyrom
I am just wondering. If I ever want to go back to the Original Windows Phone OS, can I just restore to factory settings on my windows phone? Or do I need to do some other stuff, I can't find an answer anywhere.
bowi1612 said:
I am just wondering. If I ever want to go back to the Original Windows Phone OS, can I just restore to factory settings on my windows phone? Or do I need to do some other stuff, I can't find an answer anywhere.
Click to expand...
Click to collapse
Hi there,
if you've made a backup, you can restore this and reset your phone afterwards.
That's the best solution in my opinion, because you're back on the original rom, but you're still on the qualcomm bootloader, so you can reflash a custom rom whenever you want
Of course you can restore DLOAD and flash the original ROM with ATF, too. But then you have to do the soldering stuff again, if you want to use a custom rom in the future.
thanks for your support
What about the method from cyclone box?
Do you think there will be a method soon for changing bootloader without opening the phone and buying a box? The problem is I don't want to pay for cyclone box.
Celteek said:
What about the method from cyclone box?
Do you think there will be a method soon for changing bootloader without opening the phone and buying a box? The problem is I don't want to pay for cyclone box.
Click to expand...
Click to collapse
No. I think there'll never be an option.
Afaik, this is only possible with ATF, not with cyclone.
lordmaxey said:
No. I think there'll never be an option.
Afaik, this is only possible with ATF, not with cyclone.
Click to expand...
Click to collapse
It is said on their website that it is possible to patch bootloader without opening the phone. (sorry I can't post links yet, but it is easy to find on google by typing "cyclone box lumia 800 no tp" ). Unfortunately we need a cyclone box . My question is : will there be a method with which we don't need a cyclone box?
Hey Help needed instantly
I have qualcomm bottloader ( not now ) of lumia 800. I restore Nokia DLOAD from qualcomm successfull but phone does not boot even not vibrates.
I tried nokia care suite for dead phone flashing but always says CONNECTION LOST TO DEVICE .
How can i recover bootloader or flash a ROM ?
Thank You.