Hi,
My OnePlus 7T PRO (HD1901) got bricked. It is not starting nor showing any signs of loading fastboot. Apparently, the charging is not working either.
I tried plugging it into the computer. Saw the BULK device under Ports. I installed Qualcomm and it's showing "QUALCOMM HS-USB QDLoader 9008". When I tried running MSM, it gives me an error "Firehose GetUfsInfo Failed". I tried pressing the power + Up arrow keys for a few seconds, which switches it off and then + - power together. MSM says "Connected" but each time i start it, it gives the same error.
Please help as I am not able to figure out how to resolve this.
vipul20044 said:
Hi,
My OnePlus 7T PRO (HD1901) got bricked. It is not starting nor showing any signs of loading fastboot. Apparently, the charging is not working either.
I tried plugging it into the computer. Saw the BULK device under Ports. I installed Qualcomm and it's showing "QUALCOMM HS-USB QDLoader 9008". When I tried running MSM, it gives me an error "Firehose GetUfsInfo Failed". I tried pressing the power + Up arrow keys for a few seconds, which switches it off and then + - power together. MSM says "Connected" but each time i start it, it gives the same error.
Please help as I am not able to figure out how to resolve this.
Click to expand...
Click to collapse
Unfortunately you will need a MSM tool which has Authorised access to flash in EDL mode.
Basically only Service Center have access to such tools.
You can find third party repair personel online.
mvikrant97 said:
Unfortunately you will need a MSM tool which has Authorised access to flash in EDL mode.
Basically only Service Center have access to such tools.
You can find third party repair personel online.
Click to expand...
Click to collapse
I did mention i tried MSM but i am getting an error
vipul20044 said:
I did mention i tried MSM but i am getting an error
Click to expand...
Click to collapse
You will need patched firehose to flash the phone using MSM.
mvikrant97 said:
Unfortunately you will need a MSM tool which has Authorised access to flash in EDL mode.
Basically only Service Center have access to such tools.
You can find third party repair personel online.
Click to expand...
Click to collapse
I did mention i tried MSM but i am fert
mvikrant97 said:
You will need patched firehose to flash the phone using MSM.
Click to expand...
Click to collapse
Thanks. Any guidance on where to get it from and how to go about it?
vipul20044 said:
I did mention i tried MSM but i am fert
Thanks. Any guidance on where to get it from and how to go about it?
Click to expand...
Click to collapse
The tool is a paid one and I cannot discuss about it here due to XDA policies.
I would recommend you to search online for flashing service.
SMT mode I think it was called on msm tool. It fixed my phone but wipes IMEI. At least the phone works now
if device not have signal's then dm me I'll try recover. make sure you'll be my tester it's NOT tested yet
or anyone else facing the trg error etc then let me know I'll try make file if anyone is here to test
cbomb1337 said:
SMT mode I think it was called on msm tool. It fixed my phone but wipes IMEI. At least the phone works now
Click to expand...
Click to collapse
Index of /list/Unbrick_Tools/OnePlus_7T
Try this msm tools, should work.
Related
Hello,
I super hard bricked the Phone from my Brother and he need it for work. I flashed the wrong Stock-Rom.
No when I connect the Phone to the Computer it appears as Qualcomm HS-USB QDLoader 9008.
Is there anywhere an Option to repair it?
Thank you for your attention.
RingeHD said:
Hello,
I super hard bricked the Phone from my Brother and he need it for work. I flashed the wrong Stock-Rom.
No when I connect the Phone to the Computer it appears as Qualcomm HS-USB QDLoader 9008.
Is there anywhere an Option to repair it?
Thank you for your attention.
Click to expand...
Click to collapse
Not sure with LG maybe lgup or 1 of their tools, I saved xiaomi device as long as pc recognises it should be a way, update Qualcomm HS-USB QDLoader from device manager and restart pc disabling driver signature varification. I had to put the phone in download mode.Thats best I can do someone with more knowledge will better explain. When PC doesn't find the phone that's the end without special cable, remove any sharp objects near your brother ��
---------- Post added at 06:41 PM ---------- Previous post was at 06:03 PM ----------
Have you not got a recovery installed anymore?
I Can do nothing. It wont Turn on. The only thing is to plug it into the pc
have it powered off
hold powerup and connect it to the pc
does it start in download mode?
if yes you should be able to upload the stock rom with lgup
Keep us posted how or if you can resurrect the phone.
Can't Go to Download Mode still recognised as Qualcomm 9008
RingeHD said:
Hello,
I super hard bricked the Phone from my Brother and he need it for work. I flashed the wrong Stock-Rom.
No when I connect the Phone to the Computer it appears as Qualcomm HS-USB QDLoader 9008.
Is there anywhere an Option to repair it?
Thank you for your attention.
Click to expand...
Click to collapse
If you can't re-flash a stock ROM with LG UP, perhaps you can take matters in your own hand. But you have to viod the warranty for this. Also, you have to be able to enter fastboot mode.
Since you are from GB, I assume that you have the European H850, which can be bootloader-unlocked.
If so, you can try the following:
- Unlock bootloader
- Flash TWRP
- Flash the complete 10E ZIP file
I don't know if this works, but if your phone is messed up anyways, you can as well try this before throwing it away.
I can't do anything no charging, no turning on. Nothing. The only thing is that it is recognised as Qualcomm
Fix guide for xiaomi
If it's possible for xiaomi can't see why there isn't a way for lg.
http://en.miui.com/thread-226426-1-1.html
Did you try this
http://www.androidbrick.com/ultimat...agons-are-unbrickable-qhsusb_dload_qpst_qfil/
Sounds like you can use miflash/xiaomi tool for any qualcomm snapdragon device.
jazz452 said:
If it's possible for xiaomi can't see why there isn't a way for lg.
http://en.miui.com/thread-226426-1-1.html
Did you try this
http://www.androidbrick.com/ultimat...agons-are-unbrickable-qhsusb_dload_qpst_qfil/
Sounds like you can use miflash/xiaomi tool for any qualcomm snapdragon device.
Click to expand...
Click to collapse
Bumping
Yes, but the tool are not for the phone and won't recognise it
you didnt specify what happens when you plug in usb. the only thing you said was that you can do it instead of turning on or anything else.
When i plug in the phone the phone is still dead only the processor will be recognised. I need a tool to flash the software through QHUSB. I found boarddiag but no systemimage.tot File for the phone
Follow these steps:
1. Remove the battery
2. Put back the battery
3. Hold the volume Up and connect the USB
What happens after that? Do you have the "firmware update" screen on your phone or is still death?
Still death
RingeHD said:
Yes, but the tool are not for the phone and won't recognise it
Click to expand...
Click to collapse
The second link says for any Qualcomm processor.
Did you disable driver signature? Damn only for g3
It's looking like service centre I'm afraid.
http://forum.xda-developers.com/tmobile-lg-g5/help/qualcomm-t-mobile-hs-usb-hs-qdloader-t3391520
if you still have phone inhand conntact me for check phone...
RingeHD said:
Yes, but the tool are not for the phone and won't recognise it
Click to expand...
Click to collapse
Hey check Windows Certificate Manager (certmgr.msc). Remove ANY Certifications with "USB [something] TEST003" from "Trusted Publishers and Trusted basic certificate something (sorry I have to translate it but it is the 2nd from Current User Directory.
If you have ANY Quallcom drivers (uninstall it).
Find Qualcomm HS-USB QDLoader 9008 device under Ports (COM & LPT) and note the COMxy port (in my case it is COM3).
the same happened to me, you could solve it if you were telling me how please ...
the same happened to me, you could solve it if you were telling me how please ...
I think is possible to recover the LG G5 with this tool, but require a full compatible rom in that format, impossible to find.
Here another LG G5 bricked without the "Download" mode screen, only recognizer in USB with "Qualcomm HS-USB QDLoader 9008".
This morning I decided I'd try to install CM14.1 instead of what I was running at the time, MIUI8. I must have flashed the wrong Official ROM and everything has gone downhill since then. I've also asked reddit for some advice and was told to install official developer ROM through EDL. That has been my goal for the last few hours but I haven't managed to do it yet. I believe I am accessing EDL but I don't really know how to tell, through Device Manager I see "Qualcomm HS-USB Diagnostics 900E (COM3)" but cannot flash through MiFlash as no device appears. When I am in fastboot I can see my device through MiFlash but cannot flash anything to it as I get "mismatching image and device" even though I am 95% sure that this is the correct ROM I should be flashing.
Please help I am beginning to stress out, any questions I will answer them quickly!
You must flash in edl mode
How to get from fastboot to edl
http://forum.xda-developers.com/redmi-note-3/how-to/guide-reboot-to-edl-mode-fastboot-test-t3398718
mar.ur said:
You must flash in edl mode
How to get from fastboot to edl
http://forum.xda-developers.com/redmi-note-3/how-to/guide-reboot-to-edl-mode-fastboot-test-t3398718
Click to expand...
Click to collapse
Thanks for the post, unfortunately I am having troubles getting into EDL. With the program you just linked I get stuck at "< waiting for device >". I believe there could be some driver issues as I am getting 900E and not 9008.
you need a deep flash cable for that...
here you go,
http://en.miui.com/thread-310325-1-1.html
This one is a little bit tricky but quicker and less aggressive way.
http://en.miui.com/thread-380827-1-1.html
This one is easier but you will have to sacrifice one of your USB cable ( if you have an extra one lying around)
Personally first one worked for me well..
Hit thanks if this helped.
I have tried with the deep flash cable, no luck. The second link talks about browsing to the correct drivers.. where do I get these, what is he talking about?
follow this method , drivers must be installed properly
http://en.miui.com/thread-235865-1-1.html
mar.ur said:
follow this method , drivers must be installed properly
http://en.miui.com/thread-235865-1-1.html
Click to expand...
Click to collapse
How do I start fresh? I've already got drivers that will interfere. As in, he says "Phone will be detected as QHUSB_BULK" where for me it's being detected already as the 900E one.
since you have installed a wrong rom package,you device name and status get changed. during flashing from mi flash choose to clean all. always use miflash beta
gaurav1322 said:
since you have installed a wrong rom package,you device name and status get changed. during flashing from mi flash choose to clean all. always use miflash beta
Click to expand...
Click to collapse
Okay I will remember that when I get to the point of flashing but I think that is still quite far away.
Sivi.N4 said:
How do I start fresh? I've already got drivers that will interfere. As in, he says "Phone will be detected as QHUSB_BULK" where for me it's being detected already as the 900E one.
Click to expand...
Click to collapse
You can still try the "update driver" option...As after the driver installation windows refreshes the connection and if everything goes well..Your phone will be detected as 9008
You probably already know at this point, but if you don't, the notification LED on the device will flash red when you have successfully entered EDL mode.
You can try popping open the back cover(remember to eject the sim card tray) slowly(the fingerprint scanner is connected to the back), then unplug and replug the battery. It might help you boot to fastboot.
Hope this helps.
Good luck.
Ivanlai said:
You probably already know at this point, but if you don't, the notification LED on the device will flash red when you have successfully entered EDL mode.
You can try popping open the back cover(remember to eject the sim card tray) slowly(the fingerprint scanner is connected to the back), then unplug and replug the battery. It might help you boot to fastboot.
Hope this helps.
Good luck.
Click to expand...
Click to collapse
The notification LED blinks red anytime that the phone is connected to the computer so it is hard to tell whether I am in EDL mode or not. My main problem right now is that I can't seem to get the Device Manager to say 9008 instead of 900E and therefore I cannot see it in MiFlash. Anyone else have any suggestions?
Sivi.N4 said:
The notification LED blinks red anytime that the phone is connected to the computer so it is hard to tell whether I am in EDL mode or not. My main problem right now is that I can't seem to get the Device Manager to say 9008 instead of 900E and therefore I cannot see it in MiFlash. Anyone else have any suggestions?
Click to expand...
Click to collapse
I faced same issue I solved by tearing it down and use test points to get to edl
Hi. Earlier today, I tried to root my phone using a program called LG OneClick Root. I was going to post a link to the article where I read about it here, but I can't since I have less than 10 posts. I clicked the start button after installing and launching the program and it started trying to root my phone. After a while, I got a message saying that rooting failed. Ever since then, my phone has been unresponsive. It doesn't even vibrate when I press the power button. I'm blind, so I'm not sure what the screen is showing. Does anyone know of a way to fix this? Did the program I used somehow brick my phone? Please help as soon as you can.
Living4God1991 said:
Hi. Earlier today, I tried to root my phone using a program called LG OneClick Root. I was going to post a link to the article where I read about it here, but I can't since I have less than 10 posts. I clicked the start button after installing and launching the program and it started trying to root my phone. After a while, I got a message saying that rooting failed. Ever since then, my phone has been unresponsive. It doesn't even vibrate when I press the power button. I'm blind, so I'm not sure what the screen is showing. Does anyone know of a way to fix this? Did the program I used somehow brick my phone? Please help as soon as you can.
Click to expand...
Click to collapse
Uninstall the app and see if it is still unresponsive. If not, follow this tutorial here on how to root your device. I would not follow those articles that tell you to install an one click root tool. The thread I have linked involves installing a custom recovery since the bootloader can be unlocked.
On the unresponsive part, if you have uninstalled the app and it is still unresponsive, try factory resetting the phone. This method involves turning off the phone, holding down the Volume Down button, while holding down the vol down button press and hold the power button until one second after the phone has turned on. While holding down the vol down button, press the power button a couple more times until the factory reset screen comes up. Use Vol up and down to scroll and power button to select.
I am bad at explaining things, so sorry if you do not understand.
Hope this helps!
Xsavi said:
Uninstall the app and see if it is still unresponsive. If not, follow this tutorial here on how to root your device. I would not follow those articles that tell you to install an one click root tool. The thread I have linked involves installing a custom recovery since the bootloader can be unlocked.
Hope this helps!
Click to expand...
Click to collapse
Thanks. I'll try that link. I didn't install anything on my phone, just on the computer. The app I had did everything through ADB. I don't know how I would even uninstall things from my phone with it being unresponsive. I haven't heard a sound or vibration out of it since before I posted this thread.
Living4God1991 said:
Thanks. I'll try that link. I didn't install anything on my phone, just on the computer. The app I had did everything through ADB. I don't know how I would even uninstall things from my phone with it being unresponsive. I haven't heard a sound or vibration out of it since before I posted this thread.
Click to expand...
Click to collapse
I don't think doing what that link says will even work. ADV can't seem to detect my phone when I plug it in. My computer makes a sound like there was a device plugged in, but I can't do anything with it. I'm glad I have insurance on this phone. Hopefully getting a replacement won't be too hard.
Lg up and uppercut with the firmware/kdz of the aristo 2 may fix it. Never use one click roots unless its off XDA and even then be careful with links. Also that link xsavi posted should work just make sure to follow the steps.
I just wanted to let everyone know that my phone is working again. I didn't have to do anything to it. I had someone else look at it, and it turns out it was completely dead for some reason, even though it had been on the charger for hours and there's nothing wrong with the charger. For some reason, it wouldn't respond at all for me, even after those hours, but when someone else plugged it in and messed with it, it came right on.
Lg aristo 2
Can anybody help me with rooting an LG aristo 2 i dont have a pc all i have is a chromebook
LG Aristo 2 qualcomm 9008 unbrick
my aristo 2 super hard bricked ...only shows up QDL 9008 in device manager and won't boot..completely unresponsive. Is there any fix? I've tried extsd card method to no avail. Please help.
Living4God1991 said:
I just wanted to let everyone know that my phone is working again. I didn't have to do anything to it. I had someone else look at it, and it turns out it was completely dead for some reason, even though it had been on the charger for hours and there's nothing wrong with the charger. For some reason, it wouldn't respond at all for me, even after those hours, but when someone else plugged it in and messed with it, it came right on.
Click to expand...
Click to collapse
Do you still have the phone?
LG Aristo 2 qualcomm 9008 unbrick
NonStickAtom785 said:
Do you still have the phone?
Click to expand...
Click to collapse
don't know if you were talking to me but if so then yes I still have it but it's completely dead and only shows qsb 9008 in device manager.
Tesh3180 said:
don't know if you were talking to me but if so then yes I still have it but it's completely dead and only shows qsb 9008 in device manager.
Click to expand...
Click to collapse
In device manager? You mean on window?
I didn't realize you had a bricked device to. I am here to help. I have been updating the threads as much as possible.
Does it allow you to boot into recovery or download mode?
Recovery Mode: Power+Volume, Release Power after buzz and Press again quickly.
Download Mode: Plug in Device while holding Volume Up button.
NonStickAtom785 said:
In device manager? You mean on window?
I didn't realize you had a bricked device to. I am here to help. I have been updating the threads as much as possible.
Does it allow you to boot into recovery or download mode?
Recovery Mode: Power+Volume, Release Power after buzz and Press again quickly.
Download Mode: Plug in Device while holding Volume Up button.
Click to expand...
Click to collapse
yea I've tried both modes but think bootloader is corrupt ..wont go in recovery or download mode. And yes it shows qsb9008 in device manager in Windows and in linux it shows qualcomm device. Probably gonna need unbrick image but phone is still relatively new so unable to find anything on how to unbrick it while it's in qualcomm 9008 or QDL mode.
Tesh3180 said:
yea I've tried both modes but think bootloader is corrupt ..wont go in recovery or download mode. And yes it shows qsb9008 in device manager in Windows and in linux it shows qualcomm device. Probably gonna need unbrick image but phone is still relatively new so unable to find anything on how to unbrick it while it's in qualcomm 9008 or QDL mode.
Click to expand...
Click to collapse
It's not new bro. I've already developed a lot for it. If it shows up as that you can unbrick it using the .kdz
Sent from my LGE LM-X210(G) using XDA Labs
---------- Post added at 07:42 PM ---------- Previous post was at 07:25 PM ----------
Tesh3180 said:
yea I've tried both modes but think bootloader is corrupt ..wont go in recovery or download mode. And yes it shows qsb9008 in device manager in Windows and in linux it shows qualcomm device. Probably gonna need unbrick image but phone is still relatively new so unable to find anything on how to unbrick it while it's in qualcomm 9008 or QDL mode.
Click to expand...
Click to collapse
It could be fixed if you have the encryption used by the vendor.
Sent from my LGE LM-X210(G) using XDA Labs
NonStickAtom785 said:
It's not new bro. I've already developed a lot for it. If it shows up as that you can unbrick it using the .kdz
Sent from my LGE LM-X210(G) using XDA Labs
---------- Post added at 07:42 PM ---------- Previous post was at 07:25 PM ----------
It could be fixed if you have the encryption used by the vendor.
Sent from my LGE LM-X210(G) using XDA Labs
Click to expand...
Click to collapse
I've tried lg bridge, lg mobile support tool, lg up but they won't recognize the phone..i even tried emmc dongle and it flashes the partitions but never comes out of QDL mode. I also extracted partitions from the kdz and tried fastboot but it won't go in fastboot mode or recovery or download mode.. I also tried boarddiag tool but msm8917_32 programmer isn't available. So at this point it's just a paperweight..lol. I'm gonna retry lg flash tool but if I could maybe find some way out of qualcomm 9008 mode I could probably unbrick it. Every time I plug it up to pc it shows as QDL9008 and every now and then it'll show up as unrecognized in device manager. I'm a newb to this stuff but I know that I flashed wrong rom and after that it never powered on again.
---------- Post added 08-12-2018 at 12:09 AM ---------- Previous post was 07-12-2018 at 11:56 PM ----------
Tesh3180 said:
I've tried lg bridge, lg mobile support tool, lg up but they won't recognize the phone..i even tried emmc dongle and it flashes the partitions but never comes out of QDL mode. I also extracted partitions from the kdz and tried fastboot but it won't go in fastboot mode or recovery or download mode.. I also tried boarddiag tool but msm8917_32 programmer isn't available. So at this point it's just a paperweight..lol. I'm gonna retry lg flash tool but if I could maybe find some way out of qualcomm 9008 mode I could probably unbrick it. Every time I plug it up to pc it shows as QDL9008 and every now and then it'll show up as unrecognized in device manager. I'm a newb to this stuff but I know that I flashed wrong rom and after that it never powered on again.
Click to expand...
Click to collapse
Again..thank you for all the time and help you've offered. I know one day I'll eventually fix it. Probably have to send it in but hoping I can do it myself with QFIL. Any idea of test points on LG Aristo 2..?
Tesh3180 said:
I've tried lg bridge, lg mobile support tool, lg up but they won't recognize the phone..i even tried emmc dongle and it flashes the partitions but never comes out of QDL mode. I also extracted partitions from the kdz and tried fastboot but it won't go in fastboot mode or recovery or download mode.. I also tried boarddiag tool but msm8917_32 programmer isn't available. So at this point it's just a paperweight..lol. I'm gonna retry lg flash tool but if I could maybe find some way out of qualcomm 9008 mode I could probably unbrick it. Every time I plug it up to pc it shows as QDL9008 and every now and then it'll show up as unrecognized in device manager. I'm a newb to this stuff but I know that I flashed wrong rom and after that it never powered on again.
---------- Post added 08-12-2018 at 12:09 AM ---------- Previous post was 07-12-2018 at 11:56 PM ----------
Again..thank you for all the time and help you've offered. I know one day I'll eventually fix it. Probably have to send it in but hoping I can do it myself with QFIL. Any idea of test points on LG Aristo 2..?
Click to expand...
Click to collapse
Well QDL9008 stands for Qualcomm Download Mode 9008. I think. I'll try to get some research in and let u know what I find. Maybe the bootloader is the only thing that's bricked because the bootloader is Qualcomm based and what not.
Sent from my LGE LM-X210(G) using XDA Labs
NonStickAtom785 said:
Well QDL9008 stands for Qualcomm Download Mode 9008. I think. I'll try to get some research in and let u know what I find. Maybe the bootloader is the only thing that's bricked because the bootloader is Qualcomm based and what not.
Sent from my LGE LM-X210(G) using XDA Labs
Click to expand...
Click to collapse
you are absolutely right. Can anyone do an adb dump of their aristo2..? maybe I can flash that onto extsd card and boot from there..?
Tesh3180 said:
you are absolutely right. Can anyone do an adb dump of their aristo2..? maybe I can flash that onto extsd card and boot from there..?
Click to expand...
Click to collapse
I wish I could help you there but all I have is 1.8 GB Chromebook. Very crappy. I'll PM some people to see if I can get an ADB dump for you:fingers-crossed:.
Sent from my LGE LM-X210(G) using XDA Labs
Hello, I have also bricked my Aristo 2. I have been looking all over online about what to do. The QPST, QFIL shows up a lot. I've parsed my GPT file, all that good stuff. But I can't find a way to make a proper emmc firehose.mbn. I've tried many other methods to no avail. Bootable SD, Chimera, CS tool, etc. Do I am very interested as well. My device shows in the Windows device manager as Qualcomm HS-USB QDLoader 9008. But, it shows up. I even have a dump I made before this happened through LGUP Dev mode, but I can't get it back on there.
Help me. I kinda like that phone
Ah.Pook said:
Hello, I have also bricked my Aristo 2. I have been looking all over online about what to do. The QPST, QFIL shows up a lot. I've parsed my GPT file, all that good stuff. But I can't find a way to make a proper emmc firehose.mbn. I've tried many other methods to no avail. Bootable SD, Chimera, CS tool, etc. Do I am very interested as well. My device shows in the Windows device manager as Qualcomm HS-USB QDLoader 9008. But, it shows up. I even have a dump I made before this happened through LGUP Dev mode, but I can't get it back on there.
Help me. I kinda like that phone
Click to expand...
Click to collapse
You need an emmc dump? Like the emmc that TWRP generates from a backup? Let me know because I think I can help you with that.
NonStickAtom785 said:
You need an emmc dump? Like the emmc that TWRP generates from a backup? Let me know because I think I can help you with that.
Click to expand...
Click to collapse
Yes, I believe so, I sure will try it. I didn't get one off the dump from LGUP
Hello, I will describe my problem as follows
After using my cool1 for a month with no problems i decided to flash JUI 7.0.1 (with gapps etc...) on my Cool1 via TWRP but after doing it i realized it has many bugs and apps doesn't work properly. So i decided to return to EUI. After flashing the original stock firmware and rebooting the phone automatically switches off.
Power button not working, i cannot get into recovery and i tried all combinations of buttons without success.
When i connect it to the computer the red led start blinking and my computer recognizes it ONLY in Device Manager as QUALCOMM HS-USB Diagnostic 900E (COM3).
i have all the latest drivers installed.
i tried QFIL and it also recognizes it as QUALCOMM HS-USB Diagnostic 900E (COM3) and after setting everything when i click "Download" i get this error:
Start Download
COM Port number:3
Switch To EDL
Download Fail:Switch To EDL FailFailed to Switch to Emergency Download mode
Finish Download
Click to expand...
Click to collapse
MiFlash doesn't recognize the phone so nothing to do
Coolpad Download Assistant doesn't recognize the phone.
Any suggestion that would help, please... I think it's hard bricked because it cannot get into recovery nor the fastboot mode. completely dead only Red led blinking and QUALCOMM HS-USB Diagnostic 900E (COM3).
Thank you
*Let's all be nice. If you won't write for me, show me the right places, and i'll thank you. And please thank me too if I've helped you.
realblackyz said:
MiFlash doesn't recognize the phone so nothing to do
Coolpad Download Assistant doesn't recognize the phone.
Any suggestion that would help, please... I think it's hard bricked because it cannot get into recovery nor the fastboot mode. completely dead only Red led blinking and QUALCOMM HS-USB Diagnostic 900E (COM3).
Thank you
Click to expand...
Click to collapse
Hi you need to open your phone to connect test points on mainboard in order to become in QLoader 9008 mode .
Read post for more :
https://www.pantomath.xyz/how-to-re...soft-bricked-coolpad-cool-1-c103-c106-device/
Good Luck
Teddy Lo said:
Hi you need to open your phone to connect test points on mainboard in order to become in QLoader 9008 mode.
Read post for more :
To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding!
Good Luck
Click to expand...
Click to collapse
thank you for replying but the problem is i don't have the tools to open the phone right in hand now and i have to buy them online.
alternative? the red led light keep glowing when i connect it to pc and i get QUALCOMM HS-USB Diagnostics 900E (COM3) is there another way to get into QLoader 9008 mode?
realblackyz said:
thank you for replying but the problem is i don't have the tools to open the phone right in hand now and i have to buy them online.
alternative? the red led light keep glowing when i connect it to pc and i get QUALCOMM HS-USB Diagnostics 900E (COM3) is there another way to get into QLoader 9008 mode?
Click to expand...
Click to collapse
Maybe , but just maybe you can try to make edl cable again I'm not sure if will work for you .
To do that follow instructions .
https://www.youtube.com/watch?v=ibu6roR1j2I
Good luck
Teddy Lo said:
Maybe , but just maybe you can try to make edl cable again I'm not sure if will work for you .
To do that follow instructions .
To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding!
Good luck
Click to expand...
Click to collapse
I bought and edl deep flash cable on Amazon. it will arrive in 4-5 days then gonna try with it
realblackyz said:
I bought and edl deep flash cable on Amazon. it will arrive in 4-5 days then gonna try with it
Click to expand...
Click to collapse
Did it work with the EDL cable?
ulloa666 said:
Did it work with the EDL cable?
Click to expand...
Click to collapse
nope it's not working now i have a bricked phone + wasted 10$
i think i should really consider opening the phone for the test point method
Hello,
i installed a system image, and unsuccessfully, I only have a black screen, I can't get into a fastboot. the cellphone did not charge or anything when it could be charged.
tinti1998 said:
Hello,
i installed a system image, and unsuccessfully, I only have a black screen, I can't get into a fastboot. the cellphone did not charge or anything when it could be charged.
Click to expand...
Click to collapse
Do you have something like "Qualcomm HS-USB QDLoader 9008" in the device manager?
tinti1998 said:
Hello,
i installed a system image, and unsuccessfully, I only have a black screen, I can't get into a fastboot. the cellphone did not charge or anything when it could be charged.
Click to expand...
Click to collapse
You are currently in EDL mode, you can retrieve your phone using MiFlash with Authorized Account.
But curiously, what system image you have flashed on your device that cause this?
MarcusMario0605 said:
You are currently in EDL mode, you can retrieve your phone using MiFlash with Authorized Account.
Click to expand...
Click to collapse
Hi, you know any reliable user with an authorized account? I have a SoftBricked A3.