Hello so yesterday I bought this tablet from my local police auction.
It was locked and I wanted to reset the FRP i found some guide here and tried that but after I installed some drivers it just wont turn on. The screen is dead even when I plug the charger. I all power buttons and reset it is not working.
you bricked it, or you bought dead? is there any device descriptor on linux lsusb?
Related
Hello i have recently updated my ROM but sadly something happened with my service, it just said "no service" and i wasn't able to receive or take any calls so i installed this rom again from the recovery, and then when i rebooted this device, it suddenly stopped on the green goblin logo loading screen and my device was unrecognized by a PC, recovery didn't work... so i tried a RoFUSiON which can install a rom through the pc but my device, as i said, wasn't and isn't recognized anymore. What i can do? i can't even charge it, last night i connected it to the charger and let it on. When i woke up and unplugged it, it had no battery! probably it wasn't chargning, it was discharging, and the only way i can turn my mobile on, is plugging it to the usb, doesn't matter if into the power socket or usb-to-usb, even the screen lights up without the battery but still i can't go to the recovery or fastboot (probably, because as i said my device isn't recognized so either that's the problem either fastboot doesn't work). Here's also the video about this, maybe someone can help me since i don't know what to do.. thanks in advance.
http://www.youtube.com/watch?v=pzUQA-PNI4A
Hi, i use the latest CM ROM for K910 for a quite long time. yesterday i dropped my phone and it crack my screen. was sending it for repair and now the phone wont load normally and it stays in CM loading screen and never boot up. With the cracked phone i use it for a day and sent it to the local shops to replace it.
so i managed to boot it into fastboot but sadly i cant do anything due to the bootloader is locked. all i can do is to unbrick it using the qualcomm resets which requires me to made some pin grounding and plug in the usb which allow me to use QFIL.exe to reset the phone into the very stock rom like in the factory.
after the reset it was working as it should but something is not right, the phone cant be used with its touchscreen, wont charge when it sleep and when ever the phone start to get dark when theres no input, it will stop charging and the screen wont turn on again. both when i boot the phone and when i turn off the phone and charge it. im not sure how to troubleshooting as i never encounter in my experiences. also, it will drain my battery. if i plug in my pc it will detect as Qualcomm HS-USB Diagnostics 9006 or Marshall London HS-USB Diagnostics 9006
anyone have solution for this or any idea?
Thanks in advance
AyieStyx said:
Hi, i use the latest CM ROM for K910 for a quite long time. yesterday i dropped my phone and it crack my screen. was sending it for repair and now the phone wont load normally and it stays in CM loading screen and never boot up. With the cracked phone i use it for a day and sent it to the local shops to replace it.
so i managed to boot it into fastboot but sadly i cant do anything due to the bootloader is locked. all i can do is to unbrick it using the qualcomm resets which requires me to made some pin grounding and plug in the usb which allow me to use QFIL.exe to reset the phone into the very stock rom like in the factory.
after the reset it was working as it should but something is not right, the phone cant be used with its touchscreen, wont charge when it sleep and when ever the phone start to get dark when theres no input, it will stop charging and the screen wont turn on again. both when i boot the phone and when i turn off the phone and charge it. im not sure how to troubleshooting as i never encounter in my experiences. also, it will drain my battery. if i plug in my pc it will detect as Qualcomm HS-USB Diagnostics 9006 or Marshall London HS-USB Diagnostics 9006
anyone have solution for this or any idea?
Thanks in advance
Click to expand...
Click to collapse
It shows HS-USB Diagnostics 9006 for you ! So do as I say :
1 . Turn off phone
2. press and hold vol up + vold down
3. connect to usb without powering up
4. You gets what you want !
Hi.
I recently tried (stupidly) to install CWM on SM-T350. It failed and bricked. I then was worried about the boot screen burning onto the display, so I opened it up and unplugged the cable next to the battery one. I plugged it back in, and tried to turn it on, but nothing happened.
Please help......
Hi,
i have a problem with my ceiwei A6 android projector.
One day i turned it on and it stuck on the android logo and turn off.
I tried to connect the projector with male/male USB cable to my computer and find it with adb but this doesn`t work.
Like on android phones i pressed different keys to get into the recovery mode but this also doesn`t work.
Maybe someone can help me to get into the recovery mode or has a firmware for me.
On the mainboard is a ARM MSD6A348ATT CPU maybe this help.
Thanks.
Hello. I got very urgent issue with LG G5 H850. I didnt had any software of LG on my PC nor drivers and connected G5 to pc while holding VOL UP button, phone entered into Dwonload mode for second, then into the firmware update state and its stuck in 0% for hour. I tried holding every possible button combination for 20 seconds and its not reacting, disconecting from cable also didnt do anything. There is a box on bottom with "633A B50". I installed LG bridge with drivers, connected to PC (still in Firmware Update state) and PC software cannot detect phone, i also clicked error list but it also says i need to connect to pc.
What can i do? My mission was simple, guy gived me the phone, saying "i want to sell it, i made factory reset (from system) and i forgot my gmail password". He's apple user, so he hate android, and he didnt used gmail for year or so, but seriously damm the google bypass, how to get phone up from Firmware Update state?
NWM - i just noticed i can unplug battery