hi ppl
i just installed the latest qtek rom. i did remove some of the unnecessary cabs, but forgot to remove that f***ing caller id program.
now i did configure everything (ringtones, installation of programs, clock, screen ......) and then the phone did ring and i realized that caller id is installed
is there anyway to get rid of it w/o reinstalling a "cleaned" ext.rom ??
thanks,
regards ize|man
hi,
if you want to uninstall the caller ID which came preinstalled just install the trial version and then uninstall it .
i did it and it worked for me.
you can get the trail from pocketgear.
a.hashem:
hehe. i'll give it a try. thanks!
regards ize|man
Related
caller id don't start even i run photo contact or run IA_CID_StartUp
any idea ?
since i install the new ROM, i cannot see the Extended_rom even i use ExtromTools unloker and unhide ....
the first time i boot, it's working, since no way.
thks
Conovor
try installing callerid again from another cab
it worked for me when i installed another version then removed it again!!!
Hi,
do you use Wisbar ?
When I upgrade my Qtek 2020 to Sin Merged rom, same problem occurs.
But I find out it was because Wisbar 2.1.10.
Just when upgrade Wisbar to last beta 2.1.14 the problem was solved.
Without Wisbar, caller id worked just fine.
AF
no, i don't use wish bar.
Hello to everyone,
one of my installed applications (TT5) needed a patched file. After
installing this patch my phone and contacts does not work anymore
(more accurate: Phone & contacts apps does not show any GUI - it
doesn't matter how I start them).
After removing the mentioned application I tried a lot to get them work
again, but without success. I decided to reinstall WM5.
Now the buttons HW-buttons does not work. They try to start the linked
app, but nothing happens - the taskbar shows shortly the name of them.
Also they are not displayed by the taskmanager.
Everytime when I reinstall WM5 (HimaUpgradeUt) I recognized, that
previous installed stuff is still in memory.
My Questions:
How can I make a REAL CLEAN BLANK WM5 installation (inclusive other
memory parts, if the above mentioned patch was destructive to them)?
If you have any question, I will try to answer them here.
Thank you in advance!
Hi...
enter bootloader mode by pressing power button+camera+record+reset....wait for about 4 seconds,then the bootloader menu will appear...
U will have 3 choicesnavigate with the record button,change status with camera button,confirm with navigational pad)..
enable kitl----leave it no
clean registry Hive-----change to yes
Format Storage-------change to yes
RAGO :lol:
Thanks for fast reply.
This does not work for me... any other idea???
Current setup (I downgraded few minutes ago):
-------------------------------------------------------
WM2003
ROM: 1.72.01GER
Radio: 1.17.00
ExtROM: (-nothing entered here-)
Thank you in advance!
ur current setup shows that u don't have Magneto on ur device anymore....therefore,my 1st post instruction won't work unless u have WM2005 installed....
Magneto install softwares and data on Rom,so they are persistent memory and will survive even flashing....
now do the following:
-access the storage folder from ur explorer (not windows exp.) and format it....
-unlock or unhide extended ROM...the delete all data....
other way?....here u go:
-reinstall Magneto on ur device,then do what i advised in my above post....u will have a clean storage...then downgrade if u want.... :wink:
Good luck...
RAGO :lol:
Hello,
the past few days I was not at home...
Ok, I manged it. Thank you all for fast helping!!!
Have a nice week @all
I am using the dialer included in DCD 3.2.6, but cannot access the ## codes in the dialer. Is there a dialer that works best with USCC?
If you install the DCD USCC Carrier cab, the # codes should work. I use them all the time.
i.e. ##778 opens PRL, etc.
BTC
Thanks for your reply.
I have installed the carrier cab, but I figured I would redownload/reinstall to ensure.. it wanted to uninstall the previous install of the same version number, to which I said yes. It couldn't uninstall it, but offered to install anyways. Which took. But still not taking the ##778 type codes. I there a way I can take the HTC Titan Phonecanvas (dialer) out of the kitchen into a cab file for a reinstall of that? If this would be relevant.
Have you installed a different dialer since flashing the phone? It's possible the new dialer you installed may have overwritten the file needed for the ## codes.
Even if you uninstalled that dialer, it may not have restored the file.
You can try backing up your phone, doing a hard reset and reload the carrier cab and see if they work then.
Mine have always worked when running a DCD rom, no matter which dialer I flashed with.
BTC
Ok, did a SPB backup, hard reset, and did the carrier cab again, but still no go.. did a friends phone from scratch, and his works fine..
I am thinking I may have had the vogue dialer in my .nbh? I rebuilt the .nbh with the titan dialer for friend.
Can I redo my kitchen .nbh and still have my SPB restore be ok? Or can I just get a .cab for the titan dialer?
Not sure, I know there are certain versions of SPB designed to do that, but I'm not sure. The main issue is it might restore registry entries that don't need to be and could cause some issues. Can't hurt to try, however worse case you would have to reinstall app yours apps by hand if it doesn't work.
I'm sure there is a cab for the titan dialer, however the Vogue dialer has always worked for me with the codes as well.
BTC
MetalHd said:
Ok, did a SPB backup, hard reset, and did the carrier cab again, but still no go.. did a friends phone from scratch, and his works fine..
I am thinking I may have had the vogue dialer in my .nbh? I rebuilt the .nbh with the titan dialer for friend.
Can I redo my kitchen .nbh and still have my SPB restore be ok? Or can I just get a .cab for the titan dialer?
Click to expand...
Click to collapse
SPB Backup has a "ROM Upgrade" mode that is supposed to be for when you change your ROM but want to keep all your programs and whatnot without having to reinstall them all. I've used it once and didn't notice any problems but I didn't keep using my phone that way for very long (only a few days at the most, I don't remember completely to be honest). Most people on here recommend against doing that. I've never had a problem with the ## codes on whatever dialer the default for DCD's ROMs is unless I was trying to do Sprint specific codes and I assumed they didn't work because I'm on Telus.
My new HTC S740, just hard resetted, can't run as many apps I used to use on my old Moto Q, like dotfred's task manager, or wm5torage (I know that the function is builtin, but for the record, that program doesn't run). These programs crash just when you run them.
Also, PIM Backup crashes the same way when trying to restore messages. Luckily, it estracts the contacts backup before crashing so I can restore contacts alone.
I suspect it has to do with app unlock. I can't edit the necessary registry keys with regedit stg or mobileregistryeditor because they error out ("access denied").
What can I try? SDA_ApplicationUnlock might work?
My phone is TIM-branded (italy) and has a 20282 build rom (1.15.901.0, R 0.29.30.22, P 12.29.30.09H)
EDIT: already tried this S740-specific unlocking howto but it doesn't work, cause Regedit still says access denied.
I attached the application unlock CAB in this thread:
http://forum.xda-developers.com/showpost.php?p=2211556&postcount=7
I used it on S740 and it works
[email protected] said:
I attached the application unlock CAB in this thread:
http://forum.xda-developers.com/showpost.php?p=2211556&postcount=7
I used it on S740 and it works
Click to expand...
Click to collapse
Many Thanks!! It worked!
I have tried to remove it from the REMOVE PROGRAMS option but it says:
Cookies home tab was not completely removed. do you want to remove it from the list of installed programs?
Please can anyone help me in this issue so that i can restore it to the originals.
The MENU button on the HOME at the bottom right is also NOT ACTIVE!! pls help me in this regard...
some one suggested before to CLOSE THE HTC SENSE and then uninstall... can anyone help me in this regards...
Thanks pls...
Have you tried to reinstall Co0kies Home Tab yet?
Yes i have reintalled it so many times but its still not working well and i also tried to disable HTC SENSE and then uninstall it but the problem is still there... pls help..
Go to your settings tab and select Menu>All Settings
Then tap "Today" and select the Items tab.
Uncheck HTC Sense and tap "OK"
Then go to the Start menu and tap "Settings", then "System", then "Remove Programs" and remove Co0kie's Home Tab and CHTEditor if that is installed as well. If you get an error trying to uninstall them, first try to reinstall the program and, if successful, then uninstall it.
After you have successfully uninstalled the programs go back to the Start menu and tap "Settings", then "Today" and select the Items tab. Reselect HTC Sense and tap "OK".
That should work.
why uninstall it?
you can make CHT look like standard sense..
for me, removing of CHT never worked perfectly..i had always to hard reset.
DN41
Hi
I'm having the same problem here with v1.8.5 and Windows Mobile 6.1.
I installed CHT and the Editor and when I tried to run the editor I received an error informing me that CHT version doesn't match the editor's even though both of them are v 1.8.5. I tried uninstalling CHT without any luck. Uninstaller hangs. I managed to uninstall the editor and tried again to uninstall CHT but no luck. I disabled TouchFlo and tried again, same thing. I also installed MemMaid and checked all dependencies to remove any startup or running process/service but this also didn't work. I also tried to install over again and it hangs since it first tries to uninstall the older version. I checked the registry but most of them are directly related to Manila so I kinda gave up since I am trying to avoid a Hard Reset. Any other ideas about this?
daydr3am3r said:
Hi
I'm having the same problem here with v1.8.5 and Windows Mobile 6.1.
I installed CHT and the Editor and when I tried to run the editor I received an error informing me that CHT version doesn't match the editor's even though both of them are v 1.8.5. I tried uninstalling CHT without any luck. Uninstaller hangs. I managed to uninstall the editor and tried again to uninstall CHT but no luck. I disabled TouchFlo and tried again, same thing. I also installed MemMaid and checked all dependencies to remove any startup or running process/service but this also didn't work. I also tried to install over again and it hangs since it first tries to uninstall the older version. I checked the registry but most of them are directly related to Manila so I kinda gave up since I am trying to avoid a Hard Reset. Any other ideas about this?
Click to expand...
Click to collapse
Disable sense and reinstall CHT. (reinstall will remove previous version)
Done that but it hangs. I left the phone untouched more than an hour but nothing happens.
After Uninstall cht lock screen lockscreen.can seem to be vanish how can I fix it?
I'm having the same problem. Did you succeed uninstaling it?
WhiteAdder said:
I'm having the same problem. Did you succeed uninstaling it?
Click to expand...
Click to collapse
Hello sir, did you try this:
Disable sense and reinstall CHT. (reinstall will remove previous version)?
A program I couldn't remove from my Windows device is a virus! If you don't want a virus on your device, do not install this program!
zyxyz1999 said:
A program I couldn't remove from my Windows device is a virus! If you don't want a virus on your device, do not install this program!
Click to expand...
Click to collapse
Please don't make false claims about others work. If CHT is really a virus then I think someone would have posted that 2yrs ago. It's been around way to long and I doubt the legit version is infected. Sorry you are having trouble.
zyxyz1999 said:
A program I couldn't remove from my Windows device is a virus! If you don't want a virus on your device, do not install this program!
Click to expand...
Click to collapse
I think you will have to do a hard reset to clean your device.