my sx56 works fine but when i try to dial or receive calls it get stuck and only seft reset helps.
i try hard reset, no help
please help me
maybe you have wrong RSU version or you need to perform RSU reset from the bootloader GSM menu
thanks
thanks for your reply
can you tell me step by step how to do the reset?
thanks
Goto the bootloader (power + soft rest) and press the calendar button and select reset from the menu.
note: in the bootloader screen, if you don't see "GSM Ok" , don't go any further
i will try that, many thanks
thanks
it doesnt help
any other ideas?
maybe flashing your device with another ROM will solve this issue, what's your current ROM and RSU ?
Related
Hey Guys.
Have a little problem with my xda. I want to upgrade to WM2003 via SD-Card-Method, but i can not enter the bootloader.
I hold the power button and make a soft reset, but the bootloader screen did not appears. It make only a normal soft reset....
Tried also after a hard reset, but that didn´t change anything.
Last Rom-Update worked via Bootloader.
I user a cooked kitchen rom 3.17.03 with RSU 4.21
Any one got infos how i can "repair" it?
Regards
Stefan
If I'm not mistaken XDAtools can be used to reload your boot loader.
Check out the below thread for more info.
http://xda-developers.com/forum/viewtopic.php?t=2189
Download:
http://cuba.calyx.nl/~jsummers/XDA/XDAtools-Jeff.exe
HTH
you need the tool discussed in this thread:
http://xda-developers.com/forum/viewtopic.php?t=2079
Thanks to all your answers....
Tried to flash the Rom via Programm A, but i get an Error.
Now the device is out of order. No function any more.
Neither a soft nor a hard reset returns the function.
Screen is "black" and nothing happens.
I wll call my insurance tommorrow to get a new device...
:roll:
Thanks for help, hread can be closed...
Regards
Stefan
MY Hermes was dead after upgrad to WM6 PRO 3.54c ROM
--------------------------------------------------------------------------------
Please help!
i upgraded my hermes to WM6 PRO 3.54c ROM. the phone operated well in the begining. however, when i was access the Today Music Plug-in, the phone was reboot by itself then could not entry wm 6 again (can not pass the wm6 green page and reboot and reboot again)
please help me
Hi,
The same thing happened to me with 3.43c. The only way I got passed the WM screen was to hard reset it. Give that a go and see if it helps.
Cheers
Subzuk
subzuk,
could you please tell me in detail how to fix this problem
because i have tried to hard reset my Hermes but in vain
(hold the OK, Power On and reset)
thx
siulung
siulung said:
subzuk,
could you please tell me in detail how to fix this problem
because i have tried to hard reset my Hermes but in vain
(hold the OK, Power On and reset)
thx
siulung
Click to expand...
Click to collapse
Why not try to reflash the OS again?
read the WIKI:
http://wiki.xda-developers.com/index.php?pagename=Hermes_For_Beginners#hardreset
Hi siulung,
I believe that you do this by pressing both of the soft keys to the left and right of under the screen and press reset.
Cheers
Subzuk
Siulung,
I would not do any more until you have done a serious amount of reading. The wiki link in the previous post is a good start.
Good luck.
WB
hi,
i solve my Hermes problem by hard reset it again
thank you for your help
siulung
If anyone can help me I just brick my ameo. I download olipro unlocker followed steps had everything done but after i finished the 1step it wont boot up again its just dead. tried hard reset alot of times wont even go pass it . it just light green.Pls help
Can you enter the Bootloader mode?
Press Camera Button (completely) and hit the reset button at the same time.
i know yor problem press cambutton and powerbutton for at same time so you will come to the bootloader modus now plug in your usb cabel to your device and your computer now open the image of wm6 that you want to install the setup will find your ameo now
hope you will get it
good luck from germany and sorry my bad englisch
Thank you that Fixed it. I just panic but now the whole process was finished. from 1-3 now. thank you for the reply
please help.
I have the same probleme and i can´t enter the Bootloader mode.
remove sim and storage card then do as mosho said
ie press camera, comms button and reset button then restore original rom , then olipros program
as per the wiki
http://wiki.xda-developers.com/index.php?pagename=Athena_Resets
cant get into bootloader
hello,
i cant get into bootloader at all.
i removed the sim and the memory card, al i get is a short flash of red light t the joystick, and only if the device is connected to the power cable.
it doesnt charge, it does nothing. i tried really everything.
does anybody have an idea?
thanks
mike
try a service exchange at t-mobile. there seems to be something wrong with your device.
my ameo had no probs running olipros unlocker.
regards dieter
i used the unlocker with another ameo i bought, and it worked fine.
so i tried the same with the 2nd, and it crashed.
will they find out that i tried to unlock the device?
regatds
mike
ameo dead
Hi mikekarl
we have the same problem that happened to me today.
i have done it before with another ameo worked fine.
Now i cant get into bootloader or Hardreset.
and i cant try a service exchange because iam not t-mobile customer.
Pls help
My two weeks old Softbank X01HT PDA got stuck on its start up with Windows Mobile screen. All key clicks can be heard, but nothing is happening. When dialing from another phone, ringing tone can be heard but PDA shows nothing. Few days back I tried to install freeware called ScreenLock, but failed in registraition. I suspect whether it works.
Anyway I tried soft reset, but still stuck. CD & Manual received are in Japanese, hence I am helpless. What can I do?
I think you should perform a hard reset, But all your datas (phone book, installed applications ,...) would be lost.
Hold the 2 Softkeys and reset your device with stylus. follow the instructions and on your device and do a hard reset.
Hard Reset doesn't work
Dear BSBOYS
Hard reset does not work. still problem exists.
so, in this case you should provide detailed information about your device including IPL, SPL, your rom details .....
BTW, have you read the WIKI???
Thanks bsboys, It worked! Thanks a lot!!
Hello there! I changed the rom to AP Dual 3 and now the X7500 restart and install all the problem as the first time when the rom launch.
The 3 colours are strange.
Here are some screenshot:
What can I do? Because the rom restart everytime
Thanks!
Read this: http://forum.xda-developers.com/showthread.php?t=408815
cktlcmd said:
Read this: http://forum.xda-developers.com/showthread.php?t=408815
Click to expand...
Click to collapse
Thanks for your answer. I am from Argentina, my english is not good. I tried to read everything but I can't understand how to solve it.
Do I have to download spl 1.2?
To be honest, I don't know. I own a X7510.
I suggest posting your question on the similar thread. I just suggested that thread because the screen description you showed is similar to the other one. Good luck.
By the way, how did you end up with that screen? It might be solved if you flash it again with the original ROM.
mercadocel said:
Thanks for your answer. I am from Argentina, my english is not good. I tried to read everything but I can't understand how to solve it.
Do I have to download spl 1.2?
Click to expand...
Click to collapse
1) check your SPL version. To do this push STRONG the camera button and TOGETHER push the small reset button in the back.
You will see a tri-colour screen , read the model ID ATHE100 (?) and the SPL (1.2? 3.5?) soft reset again to go back. if the model ID is scrambled... you are in trouble. Ask CMONEX help with a PM or follow the instructions from here http://forum.xda-developers.com/showthread.php?t=405604
2) from this thread http://forum.xda-developers.com/showthread.php?t=397518 choose the ROM you want PAY ATTENTION to chose the correct SPL version
3) Follow the link, download the ROM, enjoy
I press STRONG camera en reset but I can't enter in bootload mode, the screen turn grey and says "Loading..."
How can I fix it? =(
mercadocel said:
I press STRONG camera en reset but I can't enter in bootload mode, the screen turn grey and says "Loading..."
How can I fix it? =(
Click to expand...
Click to collapse
Hi
Remove memory card and the sim card from the phone.
Then Vol down+reset (Hard reset).
Then Press strong on camera button+reset then you get the Boot loader.
Then Flash your device's original rom if your device not on SPL 1.2 or SPL 3.5
Good luck
sabes143 said:
Hi
Remove memory card and the sim card from the phone.
Then Vol down+reset (Hard reset).
Then Press strong on camera button+reset then you get the Boot loader.
Then Flash your device's original rom if your device not on SPL 1.2 or SPL 3.5
Good luck
Click to expand...
Click to collapse
Thanks! I solved =)
Thanks for all the help!