Related
Hi there, I have just upgraded or should i say tried to upgrade to the new WM6 coffie ROM and the Krystal ROM but with both of these I can flash, however upon reboot it stays at the 3 colour screen
I have followed the Hard SPL guide for a G3 ---- Check
So what have I done? please someone help - it's a mates phone
also I tried to go back to the original WM5 from the FTP site, but it fails because I have updated the SPL, I would appreciate a link to a WM5 that doesn't check and that is in english........ if that would fix the problem
One last thing - i tried to use the update tools again but it says there is no device connected so I did a hard reset and tried again but no go, after a hard reset i can flash the other roms though
cheers all
No Panic !!
andytof47;1862521 said:
Hi there, I have just upgraded or should i say tried to upgrade to the new WM6 coffie ROM and the Krystal ROM but with both of these I can flash, however upon reboot it stays at the 3 colour screen
I have followed the Hard SPL guide for a G3 ---- Check
So what have I done? please someone help - it's a mates phone
also I tried to go back to the original WM5 from the FTP site, but it fails because I have updated the SPL, I would appreciate a link to a WM5 that doesn't check and that is in english........ if that would fix the problem
cheers all
Click to expand...
Click to collapse
No Panic~~~
Pls try to have a look to the link at my signature
( HardSPL easier)
please reply if ok!
I thought The sticky on top of the forum covered this
Hey there, would this be the problem? I thought Jumpspl was included in the initial upgrade tools folder?
Is this the same? and also does this problem (tri color screen) happen when it hasn't been properly flashed with the hard spl?
cheers
andytof47 said:
Hey there, would this be the problem? I thought Jumpspl was included in the initial upgrade tools folder?
Is this the same? and also does this problem (tri color screen) happen when it hasn't been properly flashed with the hard spl?
cheers
Click to expand...
Click to collapse
that is good and for experience users, mine is mostly for juniors. Please read and nothing bad.
The jumpspl... 100% work, and follow the steps, never fail.
Will your method work when not booting?
Just read your method and I hope to try it soon, but will your method work if it is not booting --- the method sounds like it needs the system to boot is this correct?
I hope it will work on this system while it is not booting...... I will let you know
OK I just read the whole post -------- The only file I can see is the jump spl.zip --
is that the hard spl or what?
dioxda2 I see how helpfull you are and thanks so far but how do I get the phone out of recovery mode or whatever mode that is??? what is the file I need??? please
thanks heaps
Hi All,
I followed the "new" instructions for updating my Prophet to WM6, but now I'm stuck at the boot loader with this info showing:
IPL 1.00
SPL 2.13
Nothing else is displayed, except for the "USB" text at the bottom (which just indicates that it's connected via usb, right?)
I suspect that "HardSPL" step did not work correctly. But it seems that there's no way now to re-try that step, because I can no longer connected to ActiveSync.
If I just try re-flashing the new WM6 ROM, it seems to complete successfully, but I'm just returned to the boot loader again. Hard resetting does nothing.
Any ideas, advice on what to try next?
Thanks.
Ah.... If only I had searched a little bit further! I found these instructions here:
http://wiki.xda-developers.com/index.php?pagename=Prophet_recovery
I've now completed that step, and my Prophet boots again. I'm now re-attempting the upgrade to WM6.
Phew! That did it. I've now successfully upgraded.
search & u will find.... the wiki has the answer...
congrats on upgrading btw....
Hi sinnerman,
I'm facing the exact same problem with my Imate JamIn. I tried everything, but it is still stuck on the tri color screen, could you please tell me which rom in the list you downloaded that fixed your problem?
Thanks.
wessamzeidan said:
Hi sinnerman,
I'm facing the exact same problem with my Imate JamIn. I tried everything, but it is still stuck on the tri color screen, could you please tell me which rom in the list you downloaded that fixed your problem?
Thanks.
Click to expand...
Click to collapse
just flash back to the original rom than use jumpspl to upgrade to the wm6 rom u like...that should be fixed ur problem.....
wessamzeidan said:
Hi sinnerman,
I'm facing the exact same problem with my Imate JamIn. I tried everything, but it is still stuck on the tri color screen, could you please tell me which rom in the list you downloaded that fixed your problem?
Thanks.
Click to expand...
Click to collapse
Sorry wessamzeidan, I don't remember which exact ROM I downloaded... I just followed the instructions from here:
http://wiki.xda-developers.com/index.php?pagename=Prophet_recovery
Hi guys,
I need your help. You'd make me amazingly happy if you could solve my problem.
I have an Orange SPV C100 (french one) and I keep trying to flash wm6.1 (the one Blackdragon_860 has released).
My problem is : I can't flash that rom. The updating process crash at 4% and I get an error saying that the ROM is corrupted.
Do you have any ideas to help me ?
Here are some additional information taken from the Hard-SPL And Soft-Spl walktrough :
1. Copy spl.nb, spl.lnk and jumpspl.exe to the root of device
Click to expand...
Click to collapse
I've done that alright
, hold camera and launch spl.lnk -
Click to expand...
Click to collapse
I've done that too.
you`ll see the white screen
Click to expand...
Click to collapse
I have no white screen. Instead a file named JumpSPL.txt is generated... Here is what is inside :
-----------------------
Comandline is: 0x10000000 \SPL.nb
SPL File: \SPL.nb
Jump Address: 0x10000000
kmode is 0
SPL file size: 524288 bytes
3. From the flasher folder run ROMUpdateUtility.exe and follow instructions to flash the Hard-SPL if needed. or you can flash *ANY* oxygen rom
Click to expand...
Click to collapse
I've done that too. I put RUU_Signed.nbh from wm61OxygenUpdate1.rar in the same directory than ROMUpdateUtility.exe
Before the flashing process itself, ROMUpdateUtility.exe tell me I going to flash the image version from 1.7.74.1 to : 1.01
Then I have a rainbow screen which says :
ONBL : 1.07.0000
SPL : 1.07.0000
Oxygen : IU
The flashing process start, then crash and 4%... Saying that image file corrupted.
One last information :
I got the same error with other ROMS. Here the list of what I already tried :
Blackdragon_860's rom, released the 11-05-2008
Standard rom, the one that comes with Soft and Hard SPL (weight about 641Ko)
A Russian rom, taken today from zfree (here)
I didn't tried the chinese one. But as edgeofthestring has eventually the same problem than mine, I not will go for this rom.
I tried to be as complete as possible... I truely need some help.
Plz plz plz hrlp.
Thx
Guigoui
Try first flashing this rom:
http://www.megaupload.com/nl/?d=6B0FDY24
After this hard-spl and than flash any rom you like
Always use rom loader from hard-spl and before flashing rename rom to RUU_Signed.nbh
i also tried to flash the file posted by you but after 4 % the phone reboots and the setup gives me the: " invaliv vendor id " message
Default
ok. may it works when you do it like this:
1. restart your phone
2. Copy spl.nb, spl.lnk and jumpspl.exe to the root of device
3. restart phone, don't connect to your PC!
4. open total commander, hold camera button and launch spl.lnk
5. Do you see a white screen? if yes proceed if not it has no
point proceeding, flashing will fail anyway!
6. Now connect your phone to your pc using the usb cable
7. From the flasher folder run ROMUpdateUtility.exe and follow
instructions to flash the Hard-SPL
8. After flashing Hard-Spl, to avoid reflashing, use always use
flasher from hard spl and rename the desired rom to flash to
RUU_signed.nbh
Hope this will finaly work for you!
i have tried it, i have the wm6.1 chinese version rom and the hard spl is not working at all in this rom, i have tried it with total commander and after the white screen appears and i connect the phone to the pc it is nor recognized by the pc...
thx nemphis for helping me... but it just don't work.
Believe me I'm not numb. I can read and use my little brain... I think I tried everything (including throwing my device to the other side of my room). There is something that keep my device from displaying this f*****g white screen.
Just for the record, I repeat, I have a french blocked orange C100...
If someone has got in the same problem and finally sorted it out, plz share how.
Nemphis, thx again but I doubt I will ever have wm6.1... Anyway I give up, so I guess I will never have wm6.1...
By the way, I also tried the rom you advised but as you so rightly said "if not it has no point proceeding, flashing will fail anyway!".
Thx you all...
c u...
by by
Is your phone sim unlocked also?
When reading through these forums there also are people saying you still need this: http://www.imei-check.co.uk/
Or ask your operator for the sim unlock code, they should give it when your phone is more than 1 year old.....
Phone simunlocked today... gonna try again tonight... Hope it will eventually work this time... Last hope anyway...
guigoui said:
Phone simunlocked today... gonna try again tonight... Hope it will eventually work this time... Last hope anyway...
Click to expand...
Click to collapse
Was your phone "app unlocked" before begining ? I would assume it is necessary, but won't pretend I'm a guru...
Christophe - Lyon - France
@guigoui :
I had this same, white screen didnt appeared .. but after unlocking using this way: http://rapidshare.com/files/105133496/Unlock_HTC.rar.html you'll see it (after runing SPL.lnk with camera button pressed) all is working !!!
I've WM6.1 !!!
Thanks!
This sounds pretty good vovakk... I'll test your file tonight (because I had no white screen after having my device simunlocked)
I can't to stand waiting until tonight...
It WORKED !!!! Now I have WM6.1 !!!
Ok so here are some additional information that could be useful.
Be sure you have .net framework 2.0 or newer before starting the unlocking process (the file shared shared by vovakk) otherwise you would be stuck at the second step.
When at step 5, I'm not sure which profile is required but, for me, it worked with "No security".
Once you've done step 5, you'll get THE white screen when laucnhing SPL.Ink (I confirm). You can start flashing.
I've flashed several rom as nemphis told me to, and it worked. Here is the list in the right order, with some notes :
1. http://www.megaupload.com/nl/?d=6B0FDY24 (given by nemhpis) : takes about 2-3 minutes, when done, I believed that my device was dead because it took a while before the PIN screen showed. Don't panic, just wait.
2. http://rapidshare.com/files/65732449/hspl.7z.html (the original Hard-Soft SPL - created by sp3dev) : extract, don't change anything, just launch RomUpdateUtility.exe. Flashing process takes less than 1 second
3. http://rapidshare.com/files/114457795/wm61OxygenUpdate1.rar (THE Windows Mobile 6.1) : In the RomUpdateUtility.exe folder, just replace the original NUU_signed.nbh by the one inside wm61OxygenUpdate1.rar. Launch RomUpdateUtility.exe. Eveything else is like 1. except that my device rebooted fast without being stuck a while on the windows mobile logo screen. The device reboot, you enter your PIN and then welcome to WM6.1 !
Hope someone would find interesting to read my so long posts...
I thank you all for your patience and help... I wouldn't be able to do it by myself.
C you
hey GuiGoui can you upload this file here or Rapidshare please. Megaupload is way tooooo slow. RUU_OxygenWM5_1.5.401.2_R3_4.1.13.28_02.67.90_HTC_EUR_Test.exe
thanks
I can't.... 8Mo limited...
guigoui said:
It WORKED !!!! Now I have WM6.1 !!!
Ok so here are some additional information that could be useful.
Be sure you have .net framework 2.0 or newer before starting the unlocking process (the file shared shared by vovakk) otherwise you would be stuck at the second step.
When at step 5, I'm not sure which profile is required but, for me, it worked with "No security".
Once you've done step 5, you'll get THE white screen when laucnhing SPL.Ink (I confirm). You can start flashing.
I've flashed several rom as nemphis told me to, and it worked. Here is the list in the right order, with some notes :
1. http://www.megaupload.com/nl/?d=6B0FDY24 (given by nemhpis) : takes about 2-3 minutes, when done, I believed that my device was dead because it took a while before the PIN screen showed. Don't panic, just wait.
2. http://rapidshare.com/files/65732449/hspl.7z.html (the original Hard-Soft SPL - created by sp3dev) : extract, don't change anything, just launch RomUpdateUtility.exe. Flashing process takes less than 1 second
3. http://rapidshare.com/files/114457795/wm61OxygenUpdate1.rar (THE Windows Mobile 6.1) : In the RomUpdateUtility.exe folder, just replace the original NUU_signed.nbh by the one inside wm61OxygenUpdate1.rar. Launch RomUpdateUtility.exe. Eveything else is like 1. except that my device rebooted fast without being stuck a while on the windows mobile logo screen. The device reboot, you enter your PIN and then welcome to WM6.1 !
Hope someone would find interesting to read my so long posts...
I thank you all for your patience and help... I wouldn't be able to do it by myself.
C you
Click to expand...
Click to collapse
How did it work............ i ended up lockin my phone it was unlocked before... now no application works... anymore it say this application is not have signed certificates..... PLZ ANY1 HELP I DONT EVEN KNOW HOW TO HARD BOOT THIS HANDSET..... I NEED URGENT HELP PLZZZZZZZZZZZZZ...
Hi everyone.
im a beginner for PDA's..i have read your post about prophet then i decided to upgrade to WM6 PDAVIET.
While i connect pda and execute software i had mistake and turn off phone.i did turn on phone after cancelled process
it just showing operator logo and IPL SPL GSM OS infos..
and i have run again Upgrade_ROM.exe than its stopping " Clearing the existing Extension ROM " ..
What did i do PLS i wait your helps
goto bootloader and flash again
follow the direction on the link to enter bootloader mode
http://wiki.xda-developers.com/index.php?pagename=prophet_bootloader
and read the NEW WM6 upgrade guide. which is a sticky on top of the page.
Thank you..
i entered bootloader screen its showing operator logo and IPL SPL... vs
then i retry to run Upgrade_ROM.exe but there are no change ?
what must i see on bootloader screen ? and now my screen vibrating during on process now is it normal ?
PLS help ?
algorytma said:
Thank you..
i entered bootloader screen its showing operator logo and IPL SPL... vs
then i retry to run Upgrade_ROM.exe but there are no change ?
what must i see on bootloader screen ? and now my screen vibrating during on process now is it normal ?
PLS help ?
Click to expand...
Click to collapse
read my post @ my signature...... please reply to that thread if you think helpful~~~
algorytma said:
Thank you..
i entered bootloader screen its showing operator logo and IPL SPL... vs
then i retry to run Upgrade_ROM.exe but there are no change ?
what must i see on bootloader screen ? and now my screen vibrating during on process now is it normal ?
PLS help ?
Click to expand...
Click to collapse
That is not bootloader... It should show a three coloured screen, and when plugged in to USB, the text in the bottom right hand corner should say "USB"
Hi all. please dont flame me or tell me to RTFM i have used the search button and still not found the answer.
im trying to upgrade a htc x7500 from wm6.1 to 6.5 however every upgrade i try i get unit reboots to bootloader and starts the progress bar but as soon as it gets to 1 % i get curropt file error. (this is with every firmware update i have tried). i also have tried to use the SPLDOWNGRADER and i get the same problem at step one.
here is my details:-
spl-1.10
athe100
ipl-v1.00
O/S WM6.1
Cheers
Doesn't sound like its fully unlocked yet. Find the unlocker (around here somewhere) and follow all of its steps again.
hvc123 said:
Hi all. please dont flame me or tell me to RTFM i have used the search button and still not found the answer.
im trying to upgrade a htc x7500 from wm6.1 to 6.5 however every upgrade i try i get unit reboots to bootloader and starts the progress bar but as soon as it gets to 1 % i get curropt file error. (this is with every firmware update i have tried). i also have tried to use the SPLDOWNGRADER and i get the same problem at step one.
here is my details:-
spl-1.10
athe100
ipl-v1.00
O/S WM6.1
Cheers
Click to expand...
Click to collapse
As technetrek said you need to unlock which will change the spl to 1.2
read this thread
http://forum.xda-developers.com/showthread.php?t=429013
yer like i said i get tthe same error trying this unlocker.
step 1 FLASH SPL
i click the flash button and up pops the rom update utility, so i continue Rand press next next next . says verifing tells me the new version so then i press update then next. the image version i have is 2.21.405.2 and the new image to be flashed is Radio-patched. i press next next and get a screen that says its gunna take 10 mins. pda does not reboot and i am connected via activesync.
so that failed.
step 2 UNLOCK RADIO
it sends the file to the unit no problem, i tick sim unlock and cid unlock click go
yer like i said i get tthe same error trying this unlocker.
step 1 FLASH SPL
i click the flash button and up pops the rom update utility, so i continue Rand press next next next . says verifing tells me the new version so then i press update then next. the image version i have is 2.21.405.2 and the new image to be flashed is Radio-patched. i press next next and get a screen that says its gunna take 10 mins. software cannot connect to the pda and it does not reboot to the bootloader and i am connected via activesync.
so that failed.
step 2 UNLOCK RADIO
it sends the file to the unit no problem, i tick sim unlock and cid unlock click go and after a while i get the ""success" windwos.
obviously this is not going to work becasue step 1 faild. click ok
STEP 3 no point itf step 1 failed.
OK
you must remove your sim and sd card
There is a guide in the AP4 thread that walks you through the similar process
It basically ensures that you have loaded all the drivers to successfuly upgrade/ unlock the phone
here it is
http://www.htc-hackers.com/uploads/AP4_How_To_1.8.pdf
edit :i suspect ther is a problem with enablerapi so try the advice above
thanks AP4 worked a treat now using wm6.5