Related
hello as i am new to the community. Ive been reading up on all posts in the forum and ive seend methods to revive my xda2. It has v23 and can detect when in serial or usb. Ive tried redocking and doing reinstall of rom to no avail. Ive also tried to do sd method the way you guys have described it but nothing happens when i do hard reset or press camera button, it just doesnt do anything. Can anyone help me? Im in california, is there somewhere i can send it to get fixed if i cant do it myself?
Hi maester_squall,
1. Get this ROM: http://www.t-mobile.nl/global/media/zip/HI_TMNL_17200_190_11700_Ship.exe
2. Get this modified upgrade utility: http://forum.xda-developers.com/download.php?id=685
3. Unpack ROM and modified utility into same directory on your PC
4. Delete "HimaGetDeviceData.exe" and "HimaClearJumpCode.exe"
5. Connect XDAII's craddle directly to your PC. Not through any USB hub.
6. Put XDAII into craddle
7. Run HimaUpgradeUt.exe
8. Wait and pray...
buzz
thanks, ill try anything right now.at the very least ill have a really expensive and nice looking doorstop.
Still getting same results. Message says its erasing current software from pocket pc and just stays a 0 percent. and is the device supposed to turn off? any other suggestions? Are there any service centers i can send it in to? I bought this off of my friend.
did you try to flash it with SD card yet?
buzz
For some reason flashing with sd card in bootloader wont work,(unless im doing it wrong or didnt make the sd card right)
you will need SD card reader and WinHEX...
i have sd card reader, i dont have winhex. i dont really know how that works, but ill give it a try. can you give me a step by step on it?
you will need SD card reader and WinHEX...
ok, i just downloaded winhex and its now registered, what do i do now? sorry to keep asking all these questions.
one more thing, you must download mtty.exe if you don't already have it...
i have that too. but what do i do with them?
one more thing, you must download mtty.exe if you don't already have it...
ok, i have mtty.exe, winhex, an sd card reader and the rom you told me to download. What do i do now? or is there a forum topic on this as i havent seen it yetthru searching all the pages.
Alive again!!!
I was able to fix it using mtty program, i did another search on bootloader commands and worked like a charm! thank you for helping, this community is the best!
cool!!!
...it was too late yesterday. we went to sleep..
i would suggest to put it one more time to bootloader mode and to make your own SD ROM backup. but not just OS. do radio and bootloader as well.
then save it on some safe place. just in case...
Alive again!!!
will do, not gonna mess with the rom,ex rom, or radio this time, i like my xda just the way it is. unless someone comes out with a way to put se on it.
what do you mean with bootloader v.23 ?
i only know of bootloader versions up to 1.06. if you have a newer one, can you post it to the forum?
cool!!!
...it was too late yesterday. we went to sleep..
i would suggest to put it one more time to bootloader mode and to make your own SD ROM backup. but not just OS. do radio and bootloader as well.
then save it on some safe place. just in case...
about bootloader v23
actually i looked arounbd about this bootloader, and found out this is one of htc's unit demos. I think these were out before the others, dont know for sure though.
i tried to update to wm6.1
then my phone hanged to the boot loader screen.
i tried to reverse to the old way i get the error 300 invalid update tool,
i tried to upgrade the hardspl using the upgrade tool it replies the same error
i tried to use PVtemp, it replies the same.
can anyone help me ?! PLEASE URGENTLY
btw i've search the forum for answers specially http://forum.xda-developers.com/showthread.php?t=353547 which was very helpfull but still have the same problem,
crazy_luv said:
i tried to update to wm6.1
then my phone hanged to the boot loader screen.
i tried to reverse to the old way i get the error 300 invalid update tool,
i tried to upgrade the hardspl using the upgrade tool it replies the same error
i tried to use PVtemp, it replies the same.
can anyone help me ?! PLEASE URGENTLY
btw i've search the forum for answers specially http://forum.xda-developers.com/showthread.php?t=353547 which was very helpfull but still have the same problem,
Click to expand...
Click to collapse
replied to you, see my thread...
==Solution Found==
==Solution Found==
okay let me explain, the rom update utility shipped in PVtemp file seems not working and always gets that error 300.
i used ftp://xda:[email protected]
and the same nknbf file it worked fine till now it's 82% now wish me luck
am planning to do HARDSPL afterwards ..and reupdate with the WM6.1 again
WISH ME LUCK
crazy_luv said:
==Solution Found==
okay let me explain, the rom update utility shipped in PVtemp file seems not working and always gets that error 300.
i used ftp://xda:[email protected]
and the same nknbf file it worked fine till now it's 82% now wish me luck
am planning to do HARDSPL afterwards ..and reupdate with the WM6.1 again
WISH ME LUCK
Click to expand...
Click to collapse
good luck
what was the full path of the tool you used to fix the update tool problem? im getting the same thing and it sounds like you might have a viable solution, but the link is broken.
shizenyasuya said:
what was the full path of the tool you used to fix the update tool problem? im getting the same thing and it sounds like you might have a viable solution, but the link is broken.
Click to expand...
Click to collapse
http://www.4shared.com/file/57952591/3955ed98/NVID_RUU.html?dirPwdVerified=2948f2e
Flash to WM5 ( as the result..) with the about NVID
Only in bootloader
My htc could only start in bootloader mode and it seems to freeze in this mode(i can tell this because when i remove the cable it still writes USB in the left corner). How can i flash a rom to it. Please help me.
w4rius said:
My htc could only start in bootloader mode and it seems to freeze in this mode(i can tell this because when i remove the cable it still writes USB in the left corner). How can i flash a rom to it. Please help me.
Click to expand...
Click to collapse
where no one read my sticky thread??
In tried Sd flashing(none other way works(
it stops for 5sec on
"Checking SD content"
but the processbar doesn´t change and then it goes to bootloader without changing anything.
i have same prb with my imate kjam... i tried to upgrade now its dtuch on start..
and itoo getting error when i tried to instal no vender rom.. plz tel me guyz. plz help me.
Some one please upload a TITAN II ROM
I tried the previous TITAN II ROM uploads, but it is not working,
the process stops at 16%
showing an flash write error happened please check your pda phone on the PC
I have download the ROM from this link and it is not working
http://forum.xda-developers.com/showthread.php?t=1815055
Now my phone is not booting up to the OS, it stops the boot screen
showing the details of SPL and Radio
Here are the details
P186100
SPL-1.18.2180.0(139346)
eMMC SMS 14624MB, F: PA44
9KRadio-1.02.80.13
Protocol-21.37.80.03
Radio-81.01.80.20
TOUCH A1(F:81, ID:15, V11, B:AA)
CAMERA ISP FW 0X9D
Some one PLEASE help me out of this issue, so that i can use the TITAN II
gnvkittu said:
Some one please upload a TITAN II ROM
I tried the previous TITAN II ROM uploads, but it is not working,
the process stops at 16%
showing an flash write error happened please check your pda phone on the PC
I have download the ROM from this link and it is not working
http://forum.xda-developers.com/showthread.php?t=1815055
Now my phone is not booting up to the OS, it stops the boot screen
showing the details of SPL and Radio
Here are the details
P186100
SPL-1.18.2180.0(139346)
eMMC SMS 14624MB, F: PA44
9KRadio-1.02.80.13
Protocol-21.37.80.03
Radio-81.01.80.20
TOUCH A1(F:81, ID:15, V11, B:AA)
CAMERA ISP FW 0X9D
Some one PLEASE help me out of this issue, so that i can use the TITAN II
Click to expand...
Click to collapse
Tried downloading the ROM again?
Is/was the battery charged above 53%?
Tried only having only the Titan2 plugged to your pc?
Faulty USB cable?
Tried using a GoldCard?
Tachi91 said:
Tried downloading the ROM again?
Is/was the battery charged above 53%?
Tried only having only the Titan2 plugged to your pc?
Faulty USB cable?
Tried using a GoldCard?
Click to expand...
Click to collapse
Thank you for the reply Tachi91.
I tried as you advised, but there is no result,
I have a question, Is there any GOLD CARD process.
If it is, please provide the info..
Thank you
gnvkittu said:
Thank you for the reply Tachi91.
I tried as you advised, but there is no result,
I have a question, Is there any GOLD CARD process.
If it is, please provide the info..
Thank you
Click to expand...
Click to collapse
use a goldcard to flash the stock Rom. Maybe it will work or not.
just use the goldcard tool and image that are floating around. Now as to what to rename your .nbh file is a complete guess. RADIMG.nbh, RADIIMG.nbh etc.
Tachi91 said:
use a goldcard to flash the stock Rom. Maybe it will work or not.
just use the goldcard tool and image that are floating around. Now as to what to rename your .nbh file is a complete guess. RADIMG.nbh, RADIIMG.nbh etc.
Click to expand...
Click to collapse
Hella Tachi91
Tried many times for gold card process uding Y Cable
TITAN II is not entering into USB HOST MODE
(POWER+VOL DOWN+CAMERA)
its always vibrating several times but not entering into usb mode.
Is there any solution for this??
Thank you
im bringing this thread up. i got the same problem. i have been trying to find an updated ruu but no avail.
I have the same exact problem
Lets hope some Senior Member or an Recognized Developer solve our problem to make the TITAN II live again with a good ROM.
Any Roms yet I'm having the same issue. Won't boot. Only into boot loader mode
I didn't think there were any custom ROMs for the titan II, why are you guys trying to flash the stock rom in the first place? Any issue that you had could have been resolved with a hard reset.
Lets hope at least now we would be able to receive a good rom to make our device live, pray so that some senior developer will come forward to resolve the issue.
i have purchased my aigopad m60 from bangkok. After 3 months, it is stuck on 'A' logo and doesnot go further. I tried hard reset using various key combinations but NO success.
Please help me getting my tab back to normal...
aigoPad m60
karan_1317 said:
i have purchased my aigopad m60 from bangkok. After 3 months, it is stuck on 'A' logo and doesnot go further. I tried hard reset using various key combinations but NO success.
Please help me getting my tab back to normal...
Click to expand...
Click to collapse
try flashing the original firmware
you can download it from aigoPad thailand
aigo.co.th/en/node/123
Click to expand...
Click to collapse
don't worry about the language
just extract the file
there's a readme/help doc file in there
just follow the steps carefully
(you'll need a microSD card preferable 2Gb)
jalokamaniac said:
try flashing the original firmware
you can download it from aigoPad thailand
don't worry about the language
just extract the file
there's a readme/help doc file in there
just follow the steps carefully
(you'll need a microSD card preferable 2Gb)
Click to expand...
Click to collapse
if i want a custom rom for aigopad m60 can?and where to find it? becoz i've googled enough...and hopeless to find a custom rom for aigopad m60...
Works great but can't use adb debugging anymore
jalokamaniac said:
try flashing the original firmware
you can download it from aigoPad thailand
don't worry about the language
just extract the file
there's a readme/help doc file in there
just follow the steps carefully
(you'll need a microSD card preferable 2Gb)
Click to expand...
Click to collapse
I used PhoenixCard to flash the image onto my aigopad m60 and I boots up great. But I can no longer connect with adb(yes I have usb debugging turned on, and it did work before things went bad).
Is anyone else having this same problem?
Anyone have any hints on how to resolve it?
any thoughts/help on this would be greatly appreciated.
Hey guys, I have a problem. I probably soft-bricked my phone. I wanted to flash rom from needrom, but after the green circle showed up, my phone won't boot, not even into recovery or factory mode. I wanted to try other Roms to unbrick it, but there is this ENABLE DRAM FAILED problem...
Windows recognizes that phone is connected, but error from the picture shows up everytime. I tried two cables, usb drivers from many sources, two notebooks, but nothing helped. I am sure that i tried ONLY rom for my phone, nothing other. I tried too a special video tutorial on youtube for Star S5, which could prevent the error if i put battery in phone after I connect it. Diddn't work either.
I red somewhere on the xda that if mobile can be connected and is recognized by computer, there is still a chance, but I am quite hopeless right now.. Please help if you know how to, or ask anything that should help you to recognize the problem, I'll answer imidiately.
THANKS FOR ANY HELP!
Yes, unfortunatelly same problem by flashing bad rom from needrom, which is still posted on their websites, so be careful!!
If anyone could help with this error it would be great.
thanks a lot :good:
Thanks a lot! Please, anybody knows how to solve this problem?
..anybody?