headset nokia HDW-2 is detected by m2000 but when trying to connect I get an error message after 1 or 2 minutes "an error has occurred, please check ....
are this 2 devices compatible or not ?
Related
Hi everybody
I have a big problem:
when i lost the gsm signal the phone is power off and never recive incoming calls ... until i'll power on again.
Is there some settings in order to search the gsm signal always...?
...cause i can't control the xda every 5 minutes if have signal or not...
I have 4.21 radio and 4.00.11 rom
Thanks all
Denis
have you tried a hard reset? or even re-writtin the bios?
that worked for me
Hi Guys,
I need your help .
I've downloaded the 4.00.16 ROM by mistake, it really didn't tell the ROM number, so now I want to revert to a earlier one and I can't.
I've got the following message: "ERROR: GetDeviceData - An established connection was aborted by the software in your host machine.
error getting devicedata" and then "ERROR 011: EXECUTE REMOTE COMMUNICATION PROGRAM ERROR. Cannot execute the remote communication program. Please make sure that the USB/Serial cable is properly connected."
PLEASE HELP ME, I'M REALLY STUCK NOW AND DON'T KNOW WHAT TO DO...
Sorry ... when can i get the radio 6.24.00 ???
can work for Italy ?
What do you mean with "re-writtin the bios" ... ? the SD card boot ?
Thanks
Hello !
I was trying to upgrade my XDA2 from the english language to german,
but my PC hung up
Now when i try to run "xda_16052ger_o2.exe" it says "ERROR 100: MODEL ID ERROR".
"The ROM image that you are trying to use is not designed to work ,,, "
With different ROM´s it says "ERROR 120: COUNTRY ID ERROR 1-1-8-8-8".
I have also tried this files "http://www.sourceo2.com/O2_Developers/Devices/O2_Xda_II/XdaIIRom.htm".
Then i have read lots of your postings like "http://forum.xda-developers.com/viewtopic.php?t=8606", but this is not working
Right now my XDA2 shows "Serial v1.06" and nothing is working
Is there any trick ? What can i do ?
Thank for any help !
Regards George
install t-mobile beta version 1.72 (it´s in english).... after that you can install almost all ROM´s or even all
i have xdaII but none of the version of activesync (3.8 or 4) does not connect to the XDAII.
when i try to connect thru bluetooth in my xda it hangs,, so i guess some problem in activesync in my XDA II,,
the actuall problem why i need to connect is to repair it for not opening the contacts.. it gives this error when i open contacts : "An Unexpected error has occured in this program."
and when i boot the xdaII it gives this error in begening : "Unable to read contact data! (Error Code: F0009859) 101:200:563"
so is it posible to installl activesync again in the xdaII ??
WBR
Naman
Hi, my TytN begin to show me "no GSM", i upgrade to WM6, but the process stop in 12% and error 262 appears. i tried to fix with this method:
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems#problem5
everything is ok, but when i use the Simulock, the utility go until the final part and says me that cant communicate with the device and the indicator bar remains in 0%
any suggestion
Hi,
I have MDA Vario II, aka Herm300, aka Tytn ... My problem is that I've got "No GSM". So I got in forum and checked how to try to Fix it threads... So I tried by putting "Hard-SPL" and also I've tried to Upgrade "Radio", but every time when I start upgrade I recieve "Error 262" at 0%, I changed several Radio's but I had always same result. Also I've tried to downgrade to Official Rom of WM5 and it stops at 13% witn "Error 262" . So my Question is:
Is it possible that I have hardware problem not radio problem .
ATM it works fine with Schap's ROM as PDA and "No Gsm" Again ...
On Bootloader I got:
IPL-1.01
SPL-1.40.Olipro
If there is another solution that may help I'm open for advice.
classic brick...
wich one is the 262 error. (why to put the error number? write the entirely error!)
Dunno if it is brick, because I cant update with most of the roms and also I get error with every radio I try to update with ... I've tried with more than 10 radio's from the archive ...
P.S. I think it is Hardware problem + I got brick and because of the hardware problem i cant reinstal rom+radio or rom to repair brick problem ...
So wich one is the error??????
error 206 207 200768 i dont know...i have this issues too and the cprog.exe seems to be incompatible ... my cable hasnt a good contact to the usb plus the rom i had i didnt downgrade to wmoriginal in a few times...
-Mobile MDA Vario II - help my screen is four colours
Hi I have the same phone a T-Mobile MDA Vario II i ran unlock program HTC_Hermes_SIM_CID_Unlock_v3a - i must have run it wrong or something cause my phone has colours on the screen red green blue white with the ipl 1.01and spl 1.40 - it used to ipl 1.4 (ithink) and spl 2.14(i think) before i tried to run the hct_herm.....v3a.
Is my phone trashed or what can i do . when i plug in the usb cable the message at bottom goes from serial to usb but thats it - the active sysnc does not see the phone. help help help any advice welcome ( short of buy a new phone) this is my new phone i only got it a day ago.
tks