Basically I'd tried all the methods that I found here (hardspl, sspl-herm, etc) but I still cannot
1) upgrade the radio rom to 1.38...
2) unlock either the sim or CID.
HERM200
ROM 2.10.751.1
extROM 2.10.751.101
Radio ROM 1.14.01.10
Protocol 32.50.7018.00H
IPL 1.01
SPL 1.09
Manufacture at 2007-02
Any idea to this ?
Even imei-check.co.uk doesn't know how to unlock it....
I have noticed that all with the radio xx.xx.01.xx has this problem...waiting for Pof's great work again
i hv checked and and HTC_BOOT is 0182, not 0107 or 0108
Can someone try to dump the radio with hermflasher and post it here?
pof said:
Can someone try to dump the radio with hermflasher and post it here?
Click to expand...
Click to collapse
Cool, I'll do it as soon as I can. Cheers!
I will try, too (Some problem now as I am now using visual studio).
Thx all for help.
Damn SoftBank! Will they ever give up?!?
Of course not! It amuses them!
benkywong said:
i hv checked and and HTC_BOOT is 0182, not 0107 or 0108
Click to expand...
Click to collapse
Have you tried running Des's SSPL and/or flashing Olipro's Hard-SSPL?? ?
Yes. I've tried Des's SSPL and flashing Hard-SSPL 1.1/1.35
mike,
are you able to flash with a different ROM? WM6? I'm planning on getting one, and if I can't change to WM6, probably not - please advise.
I can (actually I am now using LVSW 26/3 version).
For the radio rom, however, I cannot upgrade to 1.38
mikeho305 said:
I can (actually I am now using LVSW 26/3 version).
For the radio rom, however, I cannot upgrade to 1.38
Click to expand...
Click to collapse
Hi Mike, so does that mean you have successfully unlocked the new White X01HT?
Best, Gus
If one can't flash pof's radio it can't be unlocked...
Just got one Apple IMac (Power PC) machine from my friend.
Would anyone please teach me how to make use of the hermflasher to extract the radio rom ?
HERM200
ROM 3.23.0.2
Radio ROM 1.14.01.10
Protocol 32.50.7018.00H
IPL 1.01
SPL 1.30 Olipo
Manufacture at 2007-02
mikeho305 said:
Just got one Apple IMac (Power PC) machine from my friend.
Would anyone please teach me how to make use of the hermflasher to extract the radio rom ?
Click to expand...
Click to collapse
I don't think it will work on a PowerPC mac, all users reported it working on intel mac. If you can get an intel mac or linux machine, start SPL-1.04 from SSPL or flash HardSPL 1.10.Oli (you need a bootloader with 'rtask' command enabled). Once you have it, run hermflasher like this:
Code:
# ./hermflasher -r dumpedGSM.nb
Hi Pof,
These were what I'd done yesterday :-
1) Changed X01HT's SPL to 1.10Oli
2) Installed Redhat 8.0 to one of my "Old" intel PC
3) Connected X01HT to the PC using USB
4) Typed these commands using the terminal
4.1) ./hermflasher -r dumpedGSM.nb
result : Cannot find any device
4.2) ./hermflasher -s /proc/bus/usb/001/017 -r dumpedGSM.nb
result : segmentation error
4.3) ./hermflasher -s /dev/ttyusb1 -r dumpedGSM.nb
result : Cannot find any device
As new comer to Linux, these were what I can do so far. Any idea/suggestions ?
it should be /dev/ttyUSB0 or /dev/ttyUSB1 (note the upper-case)
check your /dev directory after you connect your phone to usb, ttyUSBx files appear automatically, or at least, they should if your USB works right an you have put your phone to bootloader mode...
Thanks for your information. I've tried both ttyUSB1 (default) and ttyUSB2 but I still failed to connect. I am now checking the system log and seems RedHat reports error everytime when I connect X01HT to the USB port of this "old PC". Should I looking for some device driver or better install another Linux ?
Related
Guys
I just got my TyTN (unlocked, stock TyTN, HERM200, HT636 series) yesterday. Device info as follows:
ROM version: 1.18.255.3
ROM date: 07/22/06
Radio version: 1.03.03.10
Protocol version: 32.34.7010.01H
ExtROM version: 1.18.255.106
I am on Cingular and in the Washington DC area.
I was trying to flash the Radio only to 1.16 because I am having issues connecting to the Cingular UMTS network, as per the wiki site (http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms). Here's what happened:
a. I ran the upgrade file.
b. The device got into the bootloader mode (tricolor screen) successfully
c. Then the upgrade utility gave me the following error:
ERROR 120: COUNTRY ID ERROR
The ROM image that you are trying to use is not designed to work with your device. Please check the vendor website and download the correct ROM update.
Click Exit to quit
(attached screenshot)
d. I clicked Exit. The device remained in the Bootloader mode (tricolor).
e. I then removed the battery and restarted it.
Thankfully, the device started working properly after starting up.
Any thoughts regarding what's going on? Why was I not able to update my Radio?
I will really appreciate any help in this regards.
JoKer
tried to run the upgrade twice when you get the error? without disconnecting the device from usb...
No pof ... I haven't .. I disconnected it before restarting it. What exactly should I do this time?
gravejoker said:
a. I ran the upgrade file.
b. The device got into the bootloader mode (tricolor screen) successfully
c. Then the upgrade utility gave me the following error: ERROR 120: COUNTRY ID ERROR
d. I clicked Exit. The device remained in the Bootloader mode (tricolor).
e. I then removed the battery and restarted it.
Click to expand...
Click to collapse
Everything ok until "d", don't do "e". Go to "a" again.
I followed all of above steps with my stock TyTN. Fired up the upgrade again after the country ID error, I get the white screen indicating a radio upgrade is being performed. After a while I get the 114 error, I reset the TyTN but the radio is still 1.03. Anything else I need to consider?
check your bootloader version. Radio upgrades can only be done with bootloader 1.04, if you have bootloader 1.06 you don't have the 'rtask' command needed to go to radio bootloader.
pof said:
check your bootloader version. Radio upgrades can only be done with bootloader 1.04, if you have bootloader 1.06 you don't have the 'rtask' command needed to go to radio bootloader.
Click to expand...
Click to collapse
Ok, I have 1.06 bootloader. I was interested in a newer radio ROM to figure out whether my old ROM prevents me from having a simultaneous voice/data connection...
Any suggestions what to do next?
Flash a ROM matching your CID with bootloader 1.04.
Read this wiki page:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Howto_Bootloader104
here is what I've done and what happened:
my ROM was HTC 1.18.255.3 07/22/06 with bootloader 1.04 then I ran "HERM_Unlock_v2a.exe" on the device but I didn't use "HTC_Hermes_Radio_for_SIMunlock_v1.16.00.69" to save time and i wanted a CID unlock only.
after "SUCCESS!" message from "HERM_Unlock_v2a.exe", I connected my device via USB to PC and started to upgrade to Cingular 1.31.502.1 08/30/06 with aku 2.6 and bootloader 1.06 but when I get the "ID ERROR",without disconnecting the USB, I switched back to ugrading to previous ROM HTC 1.18.255.3 and the Processe started with no problem untill 98%, then suddenly upgading interrupted a message came saying connection error or somting like that!
since then my device is stuck on windows mobile screen and I've tested solutions in the "Hermes_Upgrade Problems" page and tried using the "Hermes SD Card flashing" method, But It seems impossible to flash my phone agian.
Help me PLEASE,HELP
someone help me please!
POF can't you help me please
I think Pof is away until 3rd december, I have the similiar problems with my second hermes, if you have then use mtty to see if you have an corrupted cid using info 2.
Do you have the original rom to go back on if so that will fix your problem.
I've used mtty to send some commands to my device and it answers to some of them but It just stop responding when I type "info 2" or "info 3".
and i tried this in mtty:
"
USB>checkimage
IPL CRC checksum = 0x9FCC6BEB
SPL CRC checksum = 0x3BF03635
CE CRC checksum = 0xC0E1751A
ExtROM CRC checksum = Total Block= 1024
dwBlockIndex= 1024
Address Error1!!!
Get checksum ERROR!!!
0x0
Radio Image CRC checksum =
"
again It stop responding
also tried upgrading, no matter which ROM I try, it just can't connect to device.
and thanx for your relpy.
hi, since there is NO htc service center available around me I have to do something about it myself but my phone is still dead and I'm using a nokia 1101. PLEASE someone help me, pof are you back? can you help me?
I've tried all in this page:
"http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems"
and this one too:
"http://forum.xda-developers.com/showthread.php?t=280733"
and tested qtek 2020 rom but no use.
from what I've found out my device hang up and stop responding when it gets the "INFO 2" or "INFO 3" or "TASK 32" or perhaps any thing involving CID so no upgrading utility is able to connect to it, the only thing is to connect to it using "mtty.exe" which I've tried any command found here, but no use again.
and my SPL is 1.04
can anyone help me?
mht220 said:
I ran "HERM_Unlock_v2a.exe" on the device but I didn't use "HTC_Hermes_Radio_for_SIMunlock_v1.16.00.69" to save time and i wanted a CID unlock only.
Click to expand...
Click to collapse
Wrong, you also need a patched radio to CID unlock. Running only the exe file without the patched radio has no effect on the unit.
mht220 said:
from what I've found out my device hang up and stop responding when it gets the "INFO 2" or "INFO 3" or "TASK 32" or perhaps any thing involving CID so no upgrading utility is able to connect to it, the only thing is to connect to it using "mtty.exe" which I've tried any command found here, but no use again.
and my SPL is 1.04
Click to expand...
Click to collapse
Please attach usb monitor capture when trying to flash a ROM and a radio ROM. Otherwise can't help you.
here is exported files from usb-monitor:
and tanx for your reply
uuh... there must be something really wrong with it, no response to bootloader commands. If no sd card flashing is possible, I would suggest you to send it to service centre too.
pof said:
...I would suggest you to send it to service centre too.
Click to expand...
Click to collapse
It's a difficult option for me, as I should send it to a foreign country to service center,so are you sure there is no way like erasing somewhere using mtty?
pof said:
... no response to bootloader commands...
Click to expand...
Click to collapse
but it respond to some of them in mtty.exe e.g. "erase", "set" and some other.
pof said:
...If no sd card flashing is possible...
Click to expand...
Click to collapse
no it would stuck in "checking..." forever
tanx
HI,
I have same exactly problem on my spv m3100: since sept06 I've tried every kind of Unlock software,upgrade ROM and method found in xda..In mtty bootloader (spl 1.04) respond at every command but not "info 2","info 3" and "task 32".Sd card method works but if you try to upgrade other ROM,in your screen "loading..." and then "checking..." hangs on because the ROM upgrade must to match CID (I suppose..).I'll wait the next ROM Upgrade and ORANGE won't release it until gen07..
warrio said:
I'll wait the next ROM Upgrade and ORANGE won't release it until gen07.
Click to expand...
Click to collapse
it seems your problem is like mine if so, I don't think ANY normal upgrade can solve your prolem 'cause it can't connect to it.
so don't wait and send your device to service center, if you can.
I'm in your same conditions:there's no repair center here so I have to wait Orange who release a upgrade Rom (I hope asap..).
I have upgraded my OS and EXT_ROM to the new test release.
now i have tried u[grading my radio to 1.27.
i keep getting the BOOT LOADER screen after a reset, tried taking out my batt. didn't help.
I`m now trying the radio update again.
1. should there be a problem updating to 1.27 after OS&EXT_ROM update?
2. what can i do?
flash 1.04 bootloader and it will be fixed.
Don't use 1.01 MFG to flash radios, this is a known issue
TNX, your my god
I had that same problem but I resolved it with instructions rom wiki.
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems
"Problem 4: Device is stuck in bootloader mode (tri-color screen)
Disable ActiveSync: connections -- settings -- uncheck "Allow USB Connections"
Remove the battery, put it back in, connect the USB cable, power on the unit (this should allow the USB port to be opened again)
Wait a minute or two, if you get a message that device cannot be recognized just close and ignore it
Open mtty.exe and select "USB" from the dialog box, then hit Ok.
You should see a white screen, hit enter and you should see a prompt like this: "USB>"
Type set 14 0 (do not copy and paste!!!) and hit enter
Soft reset with stylus
OS ROM and radio version should be back and OS functional, the unit isn't a BRICK anymore!"
And It worked
Reg
SAR
hmm. I successfully flashed Radio 1.27 with bootloader 1.01MFG.
Should I be or should I be worried?
If it works then no worries! 1.01MFG bootloader can flash radios but its much safer with 1.04.
.VIBE said:
hmm. I successfully flashed Radio 1.27 with bootloader 1.01MFG.
Should I be or should I be worried?
Click to expand...
Click to collapse
hi, can you send to me the radio 1.27 nb file?
thanks.
i will note that for future reference... i did flash 1.27 with 1.01 and didnt have an issue... but if i had known it caused issues i would have used 1.04... actually i wonder if thats causing a problem i have been having.. sometimes when i soft reset my phone it will only boot the the splash screen, at which point i have to put it in bootloader and just simply reset it again and then it will fully boot.. i have flashed different OS's here and there and the problem still occurs... hmm maybe i will experiment later
liva said:
hi, can you send to me the radio 1.27 nb file?
thanks.
Click to expand...
Click to collapse
uhh, why not just dl it from this forum?
.VIBE said:
uhh, why not just dl it from this forum?
Click to expand...
Click to collapse
ok, and the command in mtty?
usb> ???? is radio_nbf ??? or what? coZ, only file_nb does used in command explication on the wiki.
After flashing radio 1.27.00 using 1.01 MFG bbotloader succesfully I have the issue that I can not go back to my previous bootloader 1.04 using mtty. exe .
I get in command usb>task 32, level FF. What is the problem? Did I lost my supercid? Please advice
plz don't double post questions gpx. Check the 1.01MFG thread.
Hi Guys
I am trying to flash my Vario II to RadioROM 1.27 but am having little success, do I need to do something special to the device for this to work? i.e SuperCID?
I have a radiobootloader of 0107, I have tried updating using MaUpgradeUt_noID in both Bootloader and CE mode.
(Yep I have read the Wiki)
Jygar said:
Hi Guys
I am trying to flash my Vario II to RadioROM 1.27 but am having little success, do I need to do something special to the device for this to work? i.e SuperCID?
I have a radiobootloader of 0107, I have tried updating using MaUpgradeUt_noID in both Bootloader and CE mode.
(Yep I have read the Wiki)
Click to expand...
Click to collapse
Run this:http://rapidshare.com/files/18091588/RUU_Radio_Only_1.27.00.00.exe Run from either BL mode or CE mode.
Ok am I doing something wrong?
- Connect the Hermes (ActiveSync disabled)
- Run MaUpgradeUt_noID.exe
But nothing happens, the update doesnt run.
Any help would be great!
Jygar said:
Ok am I doing something wrong?
- Connect the Hermes (ActiveSync disabled)
- Run MaUpgradeUt_noID.exe
But nothing happens, the update doesnt run.
Any help would be great!
Click to expand...
Click to collapse
you need activsyne ENABLED for CE mode
Sorry I ment I had disabled activesync usb mode, that file worked wonders!
All updated WOOT, running 1.27 now, all seems to be happy.
So tempted to update to WM6 but I think I will hold out for WMXL to come out of beta test, thanks for all your help.
Hy at all,
I have one MSPV M3100 and i upgrate this to WM6 Xda-Live 0.20.1 ROM. This rom woek perfectly but my telephone run very bad.
Y have this version:
ROM: WM6 Xda-Live 0.20.1
Radio ROM: 1.16.0.0
Bootloader: SPL 1.06
I want upgrade my Radio Rom to 1.27 version, but not it with himself. I have tried 4 times, and always the same error. ERROR 114= Upgrade error.
I have followed these instructions:
Upgrade instructions
1. Extract the contents of the compressed file you've just downloaded
2.Run MaUpgradeUt_noID.exe
Description for Radio 1.11 shows ver 0.70, but don't worry about it, it is really 1.11
3. The Hermes screen will turn white and show "Upgrade Radio Stack Please wait........."
4. If you get a "ERROR 120: COUNTRY ID ERROR", do not disconnect the device, run MaUpgradeUt_noID again.
5. The upgrading process will start and MaUpgradeUt_noID.exe will end up saying "ERROR 114: Upgrade Error", but the radio ROM will be flashed anyway, don't worry about that error!
6. Soft reset with stylus (Device will not be hard reset and no data will be lost)
that I have done badly?
as I have it to do?
Sorry for my english, is very bad.
Thanks a lot of for your answers.
By.
You need to prep the bootloader. I will go find the link.
Here is the wiki link. This should get you started. I am in the process of downgrading from 1.35 to 1.27 right now. lol
I have the Oliman 1.10 and ipl is 1.01. Search for hard spl and you will have it all.
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
Before you flash the radio it is a good idea to use Hard-SPL so if the flash goes wrong the phone can be recovered.
pardon, but what is Hard SPL??
Is a program??
how I prepare the bootloader??
thanks
You Need to use SSPL. Look for Radio Files with SSPL in the WIKI.
Hello,
I must make downgrade to a ROM with the version SPL 1.04 to be able to
change to my radius ROM?
That is what me say?
Thanks.
@merodio How is it that you live in the USA, but have a CANADIAN cell provider (Fido), and also can't speak/write English (again, since you live in the USA)???
EDIT: Apparently the fido icon comes up when you select "Albania - Albanian Mobile Comms" as your provider.. Which is ALSO a non-sensical choice if you're in the USA....
You need to be superCID to run the RUU you're trying to use. Use one that uses SSPL.
LegolasTheElf said:
@merodio How is it that you live in the USA, but have a CANADIAN cell provider (Fido), and also can't speak/write English (again, since you live in the USA)???
EDIT: Apparently the fido icon comes up when you select "Albania - Albanian Mobile Comms" as your provider.. Which is ALSO a non-sensical choice if you're in the USA....
You need to be superCID to run the RUU you're trying to use. Use one that uses SSPL.
Click to expand...
Click to collapse
Hello,
Pardon. It does not form well my profile. I have two mobile. One Hp 6815 with Movistar and one SPV M3100 with Orange.
Pardons but I do not understand.
How I can obtain superCID?
I want to put the RADIO ROM 1.27.0.0 SSPL that this here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
What I must do first?
Downgrade to a ROM with SPL 1.04 or Change to SuperCID.
Thanks for reply.
By.
Hey Meodio_99, sorry but you are a classical case of someone who is going to end up with a bricked (dead) phone. You have a disadvantage as your English does not appear to be very good but you need to both read AND understand otherwise sooner or later you will end up with a bricked phone.
I suggest you read all the WIKI sections talking about upgrading and also http://forum.xda-developers.com/showthread.php?t=296722 and http://forum.xda-developers.com/showthread.php?t=286755
It might take you an hour or so but it might also prevent you from crying yourself to sleep at night because you killed your Hermes!