Related
Ok... now this is going to be a work in progress and an answer to most questions...
To all pof, Des and Sleuth have done a great job in getting the tools together so we can flash our devices...
1. To all who want to SuperCID your device no matter what ROM version you have and no matter what Radio BootLoader version you have you can use POF's version 3 unlocker found here http://pof.eslack.org/hermes-unlocker/
2. Once you have SuperCID your device you can now load extracted ExtRom, OS, and radio roms (radio can only be done if you have radio bootloader 107 or less) to do this goto http://wiki.xda-developers.com/index.php?pagename=Hermes_BootloaderMFG
3. For all of those not interested in ROM cooking and flashing cooked ExtROM's all you need to use is des's SSPL tool... just copy it onto your device and run it... the SPL version should say SPL-1.09.des. The tool can be found here http://forum.xda-developers.com/showthread.php?t=293651
4. Just to clarify... once you have flashed radio bootloader 108 onto your device it is possible to do Extracted Radio only upgrades please read edit 3 below..... to check what radio bootloader version a radio rom has goto http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms and radio only upgraded require SPL 1.04... for instructions on how to flash that goto http://wiki.xda-developers.com/index.php?pagename=Hermes_BootloaderMFG
5. if your device is unusable please refer to here http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems
appologies for all the links but thats what the wiki is for guys... lots of reading but it is all worth while in the end...
and if ive missed anything feel free to add...
edit 1... The reason you SuperCID your device is to enable flashing of any SPL Bootloader versions, extracted OS roms, extracted ExtROM's and to an extent Radio ROM's (only if your device has RadioBootloader 107 or less).... but SuperCIDing your device voids the warranty... if your just looking to upgrade your device to a newer ROM and are worried about the warranty just use des's SSPL tool... read point 3 above...
edit 2... the SSPL tool... you need to copy this onto your device while windows mobile is running... if your device is not in a usable state refer to point 5... once its finished copying click on the exe and run it... it will put your device into a 'Service' mode and with bootloader versions IPL-SSPL by Des and SPL-1.09.ds... all you need to do now is choose which shipped original rom you want to use to flash your device with... see here for options http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades
edit 3... now who wants the good news woo hoo!!!! i have managed to create an unsigned nbh file and flash it onto my device... now please all follow these details step by step
1. download this http://forum.xda-developers.com/showthread.php?t=294046
2. download the appropriate Full Shipped ROM from either the Trinity or the Hermes of which you want to rip the Radio from
3. download this http://wiki.xda-developers.com/index.php?pagename=Hermes_NBH
4. extract the RUU_signed.nbh file from the exe using winrar or something
5. open a command prompt and point it to the same folder where you extracted the files you downloaded..
6. run nbhextract to extract the radio rom... delete all other .nb files except for 05_GSM.nb
7. edit the text file for nbhgen and delete all information except for this
HERM100
SuperCID
1.23.707.6
USA
300,05_GSM.nb
8. run nbhgen.. this will generate the nbh file required to flash your device...
9. copy SSPL to your device.. refer to here http://forum.xda-developers.com/showthread.php?t=293651
10. execute SSPL on your device which will put you into the 'Service' mode,
11. now run the RomUpgradeUT.exe file... and your done!!!!!!!! any questions just ask...
Dead Tytn
my tytn have bootloader 1.09 and it doesn't come up so i can't copy any thing to it , what can i do ?
jash431 said:
my tytn have bootloader 1.09 and it doesn't come up so i can't copy any thing to it , what can i do ?
Click to expand...
Click to collapse
you need to boot it into Windows Mobile... can you do this?
walshieau said:
you need to boot it into Windows Mobile... can you do this?
Click to expand...
Click to collapse
I thought step 5 covered this.
wpbear said:
I thought step 5 covered this.
Click to expand...
Click to collapse
but he didnt read step 5... i hadnt added that bit yet
Hello all,
I am a little confused about the issue of going back to BL 0107 if you flash Radio 1.33 + or Rom (say) 2.05 because you end up with BL 0108.
Isn't it true if you use Des's SSPL tool you can flash any ROM, so you can flash an older ROM, then you end up with older OS, Radio and Extended ROM as well as IPL and SPL??
Also if you use Boot loader 1.01 MFG, then upgrade individual components using MTTY??
With the latest developments over the past few days, it looks like Hermes is now an open field where one can try whatever combination as long as you can boot into service mode or Windows.
I would appreciate a comment from the developers confirming or explaining the current limitations.
Simple.
Please Answer if you are sure
Look !
my tytn have bootloader 1.09 and during upgrade it stopped , that is to say my phone das no OS so I cannot pass "WIndows Mobile " Screen unless I upgrade fully upgrade rom . I have read and tried all suggested ways but they are not useful , because bootloader 1.09 checks CID but my CID is corrupted .
I need a way to pass CID check same as SSPL . but I cannot copy any thing to phone . The only way which can help me , is a file which able to pass phone's CID check from PC .
jash431 said:
Look !
my tytn have bootloader 1.09 and during upgrade it stopped , that is to say my phone das no OS so I cannot pass "WIndows Mobile " Screen unless I upgrade fully upgrade rom . I have read and tried all suggested ways but they are not useful , because bootloader 1.09 checks CID but my CID is corrupted .
I need a way to pass CID check same as SSPL . but I cannot copy any thing to phone . The only way which can help me , is a file which able to pass phone's CID check from PC .
Click to expand...
Click to collapse
ME TOO...
IF have one NEW VERSION with "SSPL",use Micro sd /RUU ,maybe can help me and you to reflash it ...
walshieau
BIG THANKZzz for this information...
simple said:
Hello all,
I am a little confused about the issue of going back to BL 0107 if you flash Radio 1.33 + or Rom (say) 2.05 because you end up with BL 0108.
Isn't it true if you use Des's SSPL tool you can flash any ROM, so you can flash an older ROM, then you end up with older OS, Radio and Extended ROM as well as IPL and SPL??
Also if you use Boot loader 1.01 MFG, then upgrade individual components using MTTY??
With the latest developments over the past few days, it looks like Hermes is now an open field where one can try whatever combination as long as you can boot into service mode or Windows.
I would appreciate a comment from the developers confirming or explaining the current limitations.
Simple.
Click to expand...
Click to collapse
1. If you have radio bootloader 108 you cannot downgrade it...
2. Yes its true but that still wont downgrade your radio bootloader.. it will just downgrade your radio, os and extended rom
3. yes that is correct
4. current limitations read this... http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
jash431 said:
Look !
my tytn have bootloader 1.09 and during upgrade it stopped , that is to say my phone das no OS so I cannot pass "WIndows Mobile " Screen unless I upgrade fully upgrade rom . I have read and tried all suggested ways but they are not useful , because bootloader 1.09 checks CID but my CID is corrupted .
I need a way to pass CID check same as SSPL . but I cannot copy any thing to phone . The only way which can help me , is a file which able to pass phone's CID check from PC .
Click to expand...
Click to collapse
ok now you have to open an mtty session... download this ftp://xda:[email protected]/Hermes/Cooked_ROMs/SPL-1.01MFG_Pack.zip
1. Disable 'Allow USB Connections' in Activesync
2. Open mtty.exe
3. type \\.\WCEUSBSH001 in the port section and click ok
4. press 'Enter' twice and type task 32 and press enter
4. type info 2 and tell me what is displayed...
What about writing an app which fully identifies all Hermes specs? It should open a message box and answer whether device is SuperCID, which IPL, SPL, RBL, ROM, Radio and if readable which ExtROM. Wouldn't that be nice? Every noob could give all the information viable for all others to help.
well if the user was to go and look at the device information application in 'Settings' > System then can find out what radio rom version they have when in turn if they look at the table in the wiki they can tell what version of Radio Bootloader they have... but i will investigate writing a little app... shouldnt be too hard...
walshieau said:
edit 3... now who wants the good news woo hoo!!!! i have managed to create an unsigned nbh file and flash it onto my device... now please all follow these details step by step
1. download this http://forum.xda-developers.com/showthread.php?t=294046
2. download the appropriate Full Shipped ROM from either the Trinity or the Hermes of which you want to rip the Radio from
3. download this http://wiki.xda-developers.com/index.php?pagename=Hermes_NBH
4. extract the RUU_signed.nbh file from the exe using winrar or something
5. open a command prompt and point it to the same folder where you extracted the files you downloaded..
6. run nbhextract to extract the radio rom... delete all other .nb files except for 05_GSM.nb
7. edit the text file for nbhgen and delete all information except for this
HERM100
SuperCID
1.23.707.6
USA
300,05_GSM.nb
8. run nbhgen.. this will generate the nbh file required to flash your device...
9. copy SSPL to your device.. refer to here http://forum.xda-developers.com/showthread.php?t=293651
10. execute SSPL on your device which will put you into the 'Service' mode,
11. now run the RomUpgradeUT.exe file... and your done!!!!!!!! any questions just ask...
Click to expand...
Click to collapse
Just to be clear:
Can you put the new "RUU_signed.nbh" from step 8 above back into the full RUU....._ship.exe using Winrar and run it that way too?
This is very cool! So we can change to any radio ROM (upgrade or downgrade), but technically we will still have radio BL 108, but who cares.
wpbear said:
Just to be clear:
Can you put the new "RUU_signed.nbh" from step 8 above back into the full RUU....._ship.exe using Winrar and run it that way too?
This is very cool! So we can change to any radio ROM (upgrade or downgrade), but technically we will still have radio BL 108, but who cares.
Click to expand...
Click to collapse
1. i havent tried that... what is the point??
2. yes that is correct...
dead tytn jash431
my dead tytn has these informations:
1- task 32 ----> Level = FF
2- info 2 ----> HTCSF kEØ(HTCEUSB>
3- bootloader 1.09
4- stop on "windows Mobile" screen
jash431 said:
my dead tytn has these informations:
1- task 32 ----> Level = FF
2- info 2 ----> HTCSF kEØ(HTCEUSB>
3- bootloader 1.09
4- stop on "windows Mobile" screen
Click to expand...
Click to collapse
check your pm
Hi Walshieau,
After I follow your edit 3 step, when I try to upgrade the radio,
it shown Error 262. What's that error message for?
Thanks
did you copy SSPL to your device and run it before you started the upgrade???
Am I right in thinking I could mix and match all the components with this tool?
I.E. extract the o.s. from one full update then extract the radio from another, then use "NBF generator" to merge them and flash them all at once?
I have upgraded my 838pro to IPL - 1.04, SPL- 2.10 Olipro , Radio 1.43.00.00, OS is Black Majik .
Is it possible to upgrade from officially released wm06 rom from dopod (when its released), will it work, or give me problems.
I am newbie to upgrades. so i dont know technical things like hardspl etc.
Thanks
Pramod Naidu
Yes it is possible, but your SPL will be overwriten..
If you want to keep HardSPL, you need to extract the official SPL from the official ROM so it doesn`t get flashed onto your device
Shamanix said:
Yes it is possible, but your SPL will be overwriten..
If you want to keep HardSPL, you need to extract the official SPL from the official ROM so it doesn`t get flashed onto your device
Click to expand...
Click to collapse
INCORRECT sir.
HardSPL will not allow a retail SPL to flash over it.
The RUU which HTC will no doubt supply it with will probably not detect your device correctly (since you are using a superior SPL hehe).
Copy ther nbh file contained in the update to a folder and use RUUWrapper.exe which will flash it no problem (use autodetect).
One more foolish question
Is my device super CID bec of hardspl, if not, if i make my device super cid, will it give me added benefits.
viewedit said:
Is my device super CID bec of hardspl, if not, if i make my device super cid, will it give me added benefits.
Click to expand...
Click to collapse
The only benefit of SuperCID is you can read/write to the ext_rom in windows mobile.....so not really a great benefit.
HardSPL reports itself as SuperCID.....but your device is NOT. Essentially your device is virtually SuperCID.
Thanks
Thanks a lot sir.
Pramod Naidu
When I have gone back from a WM6 ROM to the Official (WM5) AT&T ROM I flashed the older (1.04 I wanna say?) version of HardSPL and it works fine and gets overwritten to the 1.11. Then if I go back to WM6 I just reflash HardSPL v7 and it works fine. I'm not sure if that actually does make it official, but I know based on the startup and bootloader screens, after going to the old HardSPL then using the AT&T Updater, everything says 1.11 and looks the same as it did before I started putting cooked ROMs on my phone.
What if its exe file
how do i extract the nbh from exe file.
How to extract nbh from exe
how do i extract nbh from exe to flash it to hardspl, i dont want to downgrade my spl
Use winrar.
Right click on the file and "open with winrar"
Question?
mrvanx said:
INCORRECT sir.
HardSPL will not allow a retail SPL to flash over it.
The RUU which HTC will no doubt supply it with will probably not detect your device correctly (since you are using a superior SPL hehe).
Copy ther nbh file contained in the update to a folder and use RUUWrapper.exe which will flash it no problem (use autodetect).
Click to expand...
Click to collapse
Hi mrvanx,
Just a quick question regarding your answer to Shamanix...
You said here that all he needs to do is copy the their nbh file in the update and use the RUUWrapper to flash it... Surely he needs to extract only the rom, ext rom, and radio? Then recompile to a nbh file to flash?
The original nbh file is still going to contain the spl & ipl which will cause problems not so?
Sorry if i am butting in here
Regards.
Trezona said:
Hi mrvanx,
Just a quick question regarding your answer to Shamanix...
You said here that all he needs to do is copy the their nbh file in the update and use the RUUWrapper to flash it... Surely he needs to extract only the rom, ext rom, and radio? Then recompile to a nbh file to flash?
The original nbh file is still going to contain the spl & ipl which will cause problems not so?
Sorry if i am butting in here
Regards.
Click to expand...
Click to collapse
The flash will go ahead as normal but the SPL and IPL will NOT be written over.
Either that or just use the repackaged version of the official WM6 dopod ROM ive posted in the WM6 section.
mrvanx said:
The flash will go ahead as normal but the SPL and IPL will NOT be written over.
Either that or just use the repackaged version of the official WM6 dopod ROM ive posted in the WM6 section.
Click to expand...
Click to collapse
Great! i understand, thanks!
Regards.
please help me!
A quick google search on the board returns THESE RESULTS. Or you could look at the spl downgrade guide HERE.
I'm having trouble downgrading too.
Following mrvanx's guide, I downgraded to Hard SPL 1.10 with no problem. But when I try to downgrade to either 1.04 or 1.06, I lose the ActiveSync connection, the phone never enters bootloader, and I get an error message from the RUU saying that the connection was lost.
After several hours trying everything I can think of, I'm officially stuck.
Any thoughts?
I had same problem yesterday. In CustomRUU you need to set Unsafe SPL it is the only solution for downgrading SPL. ATT: SPL 1.04.nbh
igord...
Thanks! That did the trick!
I am here to help,
Regards,
Igor
thanks!!!!!!!
igord said:
I had same problem yesterday. In CustomRUU you need to set Unsafe SPL it is the only solution for downgrading SPL. ATT: SPL 1.04.nbh
Click to expand...
Click to collapse
the file was broken, can u give me another link??
igord said:
I had same problem yesterday. In CustomRUU you need to set Unsafe SPL it is the only solution for downgrading SPL. ATT: SPL 1.04.nbh
Click to expand...
Click to collapse
I downloaded this file to my computer, but what is the next step? How can I run this .nbh file?
swacsa said:
I downloaded this file to my computer, but what is the next step? How can I run this .nbh file?
Click to expand...
Click to collapse
you need Custom RUU to run it , to download Custom RUU go to http://forum.xda-developers.com/showthread.php?t=298737
Hakim Rahman said:
you need Custom RUU to run it , to download Custom RUU go to http://forum.xda-developers.com/showthread.php?t=298737
Click to expand...
Click to collapse
I downloaed the Custom RRU file, but what is the next step?
(I copied the .nbh file as "RUU_signed.nbh" and the .exe file to the PDA, and I run it, but with the colored sreeen it freeze.)
Now can I run the ROM update?
swacsa said:
I downloaed the Custom RRU file, but what is the next step?
(I copied the .nbh file as "RUU_signed.nbh" and the .exe file to the PDA, and I run it, but with the colored sreeen it freeze.)
Now can I run the ROM update?
Click to expand...
Click to collapse
I got a HTC Touch Diamond 2, and it works on that...
I'm a total newbie to Windows Mobile. Trying to app/registry unlock my phone, I downloaded regedit.exe and the regeditSTG2.exe to my pc. I've tried dragging them to the Qtek 8500. The regedit.exe is on the phone, the STG2.exe doesn't even appear. Trying to run the regedit.exe from the phone results in nothing - leftclicking just shows up a "General" properties tab, with file type, Location \ (must be root, right?) , file size etc. Right clicking offers cut, copy, shortcut, delete and rename.
1. So how do I run it?
2. The regeditSTG2 is so called "digitally signed." What does this mean, and what benefits does it bring?
3. Why wont the regeditSTG2 allow itself to be dragged onto the "mobile device?"
Thank you
There is a regeditSTG2 in cab-file, just copy to your device and launch. You can run it from Start Menu
Thank you Erofich!
I want to flash your 6.1 ROM according as per instructions:
1) make an application unlock
2) copy content of SSPL to the root of your device
3) run SPL.lnk
4) run ROM Update Utility.exe on your PC
5) follow the instructions
6) wait until flash process will be completed
My current ROM is 1.02.252.1. I want to have the safest possible flash possible. The application unlock contains two pieces, one the regeditSTG procedure, and two, the SDApplication unlock tool.
Q1. If I understand correctly that is step one above, right?
However, I've seen some comments about the RadioQuote:
Originally Posted by landwomble
* whether this replaces the radio? If not, anything I should be aware of?
where you answered that
Just flash latest cingular rom first, and flash wm6.1 over it
Q2. a )If I flash the latest cingular rom first, wouldn't I then still need to CID unlock the device, or is there a way to use the SSPL for that process? b) If I don't flash the cingular rom first, what will happen to the radio?
Q3. Someone, I believe it was Raskell, posted a back up procedure in case of bricking which entailed extracting and *.nbh file from the official RUU installer. a) Where do I find the official RUU installer? b) If I do not follow this back up procedure, can I still do it if I fail - that is can I do it even if the 8500 would be non-functional?
Thanks
dbrotzen said:
The application unlock contains two pieces, one the regeditSTG procedure, and two, the SDApplication unlock tool.
Click to expand...
Click to collapse
No, application unlock contains only one piece regeditSTG procedure for any Qtek or i-mate ROMS. And SDA Applcation Unlock for Cingular ROM
dbrotzen said:
Originally Posted by landwomble
* whether this replaces the radio? If not, anything I should be aware of?
Click to expand...
Click to collapse
All the my, or Jony_aa's ROMS doesn't flashes radio or something else. These ROMS contains only OS part
dbrotzen said:
Q2. a )If I flash the latest cingular rom first, wouldn't I then still need to CID unlock the device, or is there a way to use the SSPL for that process?
Click to expand...
Click to collapse
You can flash via SoftSPL, BUT it will be safer if you will make a SuperCID procedure (but pay attention to all the steps, otherwise you can crash your radio and it cant be recovered)
dbrotzen said:
b) If I don't flash the cingular rom first, what will happen to the radio?
Click to expand...
Click to collapse
I don't know. But this sequence (any ROM->Cingular 4.1.502.5 official rom->any custom rom) already tested many-many times.
dbrotzen said:
Q3. Someone, I believe it was Raskell, posted a back up procedure in case of bricking which entailed extracting and *.nbh file from the official RUU installer. a) Where do I find the official RUU installer? b) If I do not follow this back up procedure, can I still do it if I fail - that is can I do it even if the 8500 would be non-functional?
Click to expand...
Click to collapse
Links from 4pda.ru to OFFICIAL roms:
European Qtek 8500 v3.6.251.0 ROM
http://www.myqtek.com/media/914075-ruu_star100_3.6.251.0_02.67.30_qtekeur_ship.exe
Cingular 3100/3125 v4.1.502.5
http://www.america.htc.com/support/docs/RUU_STAR100_4.1.502.5_02.79.30_CWS_SHIP.exe
Russian Qtek 8500 v3.6.261.0
http://www.myqtek.com/media/817887-ruu_star100_3.6.261.0_02.67.30_qtekrus_ship.exe
Scandinavian Qtek8500 v3.6.252.0
http://www.myqtek.com/media/758929-8500_upgrade.zip
Dopod 710/S300 v1.2.709.1
http://www.fs2you.com/en/files/762f56b8-e294-11dc-9e1b-0014221b798a/
i-mate Smartflip v1.2.301.2
ftp://ftp.clubimate.com/i-mate_Smartflip_WWE_1.2.301.2_ship.zip
And the steps to flash new StarTrek device to any unofficial ROM:
- make an application unlock
- make a SuperCID unlock
- launch SoftSPL on your device
- flash ANY startrek's ROM
Erofich, thank you ever so much!
can't perform backup of registry for i617 blackjack 2
when i use this registry editor to backup my phone it give me the error "unable to perform backup" can anybody tell me why? is there any registry editor that backs up windows mobile standard?
Hi guys
I decided to get [ROM][WWE][9.Mar.2010]Leo lite 2.10/1.66 base (5.2.21895) 576 ram and got HSPL along with the 2.07 radios for use with 2.1
But I thought I could install the radios after flashing the rom, and now it wont boot up..
Is it bricked? Is there any way I can repair this?
I'm so worried right now
Take battery out, hold volume down whilst booting to enter bootloader. Connect to pc, install correct radio. You may need to drag the .nbh into the same folder as customruu. copy customruu.exe from rom you downloaded if you dont have it included with the radio you download. you need the .nbh and customruu in same folder.
Then just run it and everything will be super.
lapingris said:
Hi guys
I decided to get [ROM][WWE][9.Mar.2010]Leo lite 2.10/1.66 base (5.2.21895) 576 ram and got HSPL along with the 2.07 radios for use with 2.1
But I thought I could install the radios after flashing the rom, and now it wont boot up..
Is it bricked? Is there any way I can repair this?
I'm so worried right now
Click to expand...
Click to collapse
what radio have you flash???
rom with 576 Mb request radio 2.07 on higher,
but not last radio 2.09
If I read this right he hasn't flashed the radio at all so has a generic ROM radio. Its not a critical problem by any means and his phone will be up and running in no time.
leoni1980 said:
Take battery out, hold volume down whilst booting to enter bootloader. Connect to pc, install correct radio. You may need to drag the .nbh into the same folder as customruu. copy customruu.exe from rom you downloaded if you dont have it included with the radio you download. you need the .nbh and customruu in same folder.
Then just run it and everything will be super.
Click to expand...
Click to collapse
fantastic, thanks alot
leoni1980 said:
If I read this right he hasn't flashed the radio at all so has a generic ROM radio. Its not a critical problem by any means and his phone will be up and running in no time.
Click to expand...
Click to collapse
then to be enough a sofreset
Thank You
This just solved my problem also. Thanks dude.
Daz
HD2 is extremely hard to brick but one you get it right, it gets as hard as a brick lol!
No seriously, as long as one can boot the HD2 in the "boot loader" mode (RGB color stripes) one can recover from any situation known to mankind
Cheers and enjoy your HD2
Faisal.
leoni1980 said:
Take battery out, hold volume down whilst booting to enter bootloader. Connect to pc, install correct radio. You may need to drag the .nbh into the same folder as customruu. copy customruu.exe from rom you downloaded if you dont have it included with the radio you download. you need the .nbh and customruu in same folder.
Then just run it and everything will be super.
Click to expand...
Click to collapse
hey im so new to this there is everychance i will make my hd2 explode, although i am taking heed of everything i read, i seem to be having problems simply installing 'radio 2.07' so that i can install android froyo, which im yet to establish where to get it from , ive updated my spl and all is ok so far. THe radio file i have is RUU_signed.nbh and i just installed hspl3 which worked grand ^^. the nbh radio file however, isnt recognised by either my pc, or my phone :/ really sorry if im asking dumb questions but i have come this far without asking one and im not coming up with anything with regards to the installation of the radio file :/ cheers for help if you can .
fishegg70 said:
hey im so new to this there is everychance i will make my hd2 explode, although i am taking heed of everything i read, i seem to be having problems simply installing 'radio 2.07' so that i can install android froyo, which im yet to establish where to get it from , ive updated my spl and all is ok so far. THe radio file i have is RUU_signed.nbh and i just installed hspl3 which worked grand ^^. the nbh radio file however, isnt recognised by either my pc, or my phone :/ really sorry if im asking dumb questions but i have come this far without asking one and im not coming up with anything with regards to the installation of the radio file :/ cheers for help if you can .
Click to expand...
Click to collapse
First, confirm that your spl is now 2.08.hspl (check in bootloader mode)
Next you need to flash the new radio file to your device. Read this - http://forum.xda-developers.com/showthread.php?t=609477. You need to either have the ruu_signed.nbh file in a folder with the CustomRUU.exe and then run the exe or else rename to LEOIMG.nbh and flash via the sd card.
tks a lot bro... you made my day... really apreciate it..