Guys... i may have a solution/workaround to enable the use of SDHC Cards in the Hermes... i have obtained some SDHC Drivers and reg settings...
but i unfortunately dont have a SDHC card lying around... so if you have one PM me and ill send you the instructions...
cross those fingers guys
That would be so sweet! But I wonder if anyone here has such card, since it has been tested not to work earlier. And I for sure would sell it pretty quickly if it didn't work.
Best of luck with your efforts on this one!
Good luck on your efforts.
There are a LOT of anxious people out here hoping you are successful! (including myself!)
I have a 4gb microSDHC card. Send me the instructions and I will try them after I get home from work today...
an Update... cooking a new ROM with the appropriate drivers inserted into the XIP and will upload for the users to test...
schapps rom already supports sdhc, I am using it right now wot my 4gb microsdhc card from Sandisk
Can confirm what mcq3000 says, schapps ROM and the SanDisk 4GB SDHC micro SD works well.
Cheers
LB
Lord Buckingham said:
Can confirm what mcq3000 says, schapps ROM and the SanDisk 4GB SDHC micro SD works well.
Yah!!! But I still am willing to try out those drivers, please. The more the merrier... Walshieau, I PM'd you with my details.
Click to expand...
Click to collapse
update 1.... confirmed schaps ROM's are SDHC compliant...
OEMDrivers into other ROM's as well as some reg entries... looking good so far...
Does anyone know if the LVSW 5-19 ROM (3.30.2.1) supports the SDHC as well? Looks like it might be the same OS number so I can hope for the best.
I'm currently running vp3G's mod of it.
pcm2a said:
Does anyone know if the LVSW 5-19 ROM (3.30.2.1) supports the SDHC as well?
Click to expand...
Click to collapse
I am running LVSW 5/19 and my 4gb microSDHC does not work
pcm2a said:
Does anyone know if the LVSW 5-19 ROM (3.30.2.1) supports the SDHC as well? Looks like it might be the same OS number so I can hope for the best.
I'm currently running vp3G's mod of it.
Click to expand...
Click to collapse
Wild guess, no, because of the build. BUT, I should be getting my 4g sdhc today. And since I'm using vp3g's version currently on my 8525, I'll be able to check this real easy after work tonight (@ 12AM EDST) Let you know then, okay?
Thanks, I appretiate you checking. I suspect you are right that it will not because the 5-19 build doesnt. Maybe we can get vp3G to include this in his next build for us!
Hey guys... Sorry about last night- I had to pull a surprise double at work. Just put my 4gb sdhc micro in my 8525 with vp3G's latest (as of 6/15), and...
Nothing!!! But we guess that. The kicker is that I don't what the new card is formatted in-- my cardreader, or maybe win2k doesn't see the card either. So i will flash to schapps' ROM now as I was planning to all along, and the do LVSW's new WWE ROM 6/16 as well and report on both. TTFN!!!
Just finished flashing schapp's, and as we know already the sdhc micro does get read with this build. Yay!!! The card works!!!Now downloading lvsw's newest rom... Will be a couple of hours before I can check it, probably TTfn!!!
Well, if anyone wants to know, I just flashed lvsw's ROM (6/16), and my 4gb sdhc reads as 3878.47mb. So it works. And I and my 8525 are happy until the next big thing happens. (But I still don't really like the black!!!)
just to confirm, I have just flashed the Black Shadow ROM, and my SanDisk 4gb microSDHC card *DOES* work with this ROM
Nice to know! From reading the 6-16 LVSW post it looks like there are some pretty big bugs and missing stuff in the new release so it might be a while before we get to upgrade to that. I might just pick up a $30 2gig card to use with the fantastic vp3G build that I'm currently running.
Out of curiosity, has anyone tried using a sdhc with a capacity > 4gb?? If I follow the logic behind what the fix for this issueis , they should work, but what do I know...
an Update.... just got work from 'someone' that ALL the WM6 ROMS from HTC with build 17745 and UP have support for SDHC...
halfhp said:
Out of curiosity, has anyone tried using a sdhc with a capacity > 4gb?? If I follow the logic behind what the fix for this issueis , they should work, but what do I know...
Click to expand...
Click to collapse
IS THERE one, yet?? It took so long to get 4gb micro...
walshieau-- Yayyyy
whatledog - I've seen links to 16 gig micro sdhc cards...beyond that I can't say. its so hard to separate fact from fiction on the internet
edit: so I looked for the 16 gig link and all I could find were references to an 8 gig from samsung which doesn't appear to be readily available. rats.
Related
Since there's a lot of new people asking about 4gb MiniSD Cards, I figured I might as well start a new thread with places that people have purchased 4gb cards from, and had full success with, myself included.
http://www.emartbuy.co.uk/products.php?prodtypeid=20&memoryType=Mini+SD#product-450
http://search.ebay.com/_W0QQsassZblownQ2dz
http://www.mobymemory.com/proddetail.asp?prod=miniSD_4096mb_MOBY_001
Now, on the other thread, it was mentioned about SDHC which stands for SD High Capacity, does -NOT- work with the Wizards at all. These you do need to steer clear of, however, one of the card from the above retail points, do work and have been tested in real world situations and real world Wizards, by very much real people, like me. So buy from these places, if anyone else has a successful purchase, please post where you got it from, otherwise, please leave clarifications to private message. Wanna keep the thread simple and clean. Can we please get a sticky on this and I'll step in to maintain please?
Thanks, enjoy the Wizard.
-EDIT: Since I noticed there are quite a few people yelling up and down that 4gb MiniSDs do not exist, I have posted a picture of my card, OVER the 2gb 1907mb (formatted), and 2048mb (what windows sees 2GB as), limit on my Wizard. Now kindly, DO NOT REPLY TO THIS THREAD SAYING THAT 3 OF US ARE LIARS. Oh, and if you have a working 4gb card over the 2048mb mark, please take a screenshot with Screen Capture Utility, and post it here with a link, just to reaffirm that we're not crazy.
In that second link, the ebay seller....if you look at the image of the 4gig mem card, you can tell that the 4. is photoshopped. Wouldnt seem necessary if it was real, so why the fake picture? Are these really 2 gig mem cards that ppl have said are hacked to act like 4 gig cards that have a shorter life?
The Sandisk website shows 4 gb sd cards of different flavors...
Including mini sd cards
somebody7 said:
In that second link, the ebay seller....if you look at the image of the 4gig mem card, you can tell that the 4. is photoshopped. Wouldnt seem necessary if it was real, so why the fake picture? Are these really 2 gig mem cards that ppl have said are hacked to act like 4 gig cards that have a shorter life?
Click to expand...
Click to collapse
I bought, i've had it about 2 weeks without a single problem already, using over 2gb of space. And the card when you get it actually doesn't have any printing on it at all, and has barely any marking on the bottom side, just a serial and some manufacturing code. I can take a picture if somebody wants.
CyberDad said:
The Sandisk website shows 4 gb sd cards of different flavors...
Including mini sd cards
Click to expand...
Click to collapse
The 4gb miniSDs featured on their site are SDHC (Secure Digital High Capacity) or something like that, and those are INCOMPATIBLE with Wizards or any other device on the market for that matter, cept recent devices within the past, say, 6 months.
SDHC is just a FAT32 card, they work perfectly well with a Wizard... You can't get more than 2GB on FAT16.
Dude, I plugged one of these (Transcend 4GB SDHC) into my Cingular 8125 and it didn't even know it was there. It appears that Cynagen is right.
My Wizard didn't even detect the my 2GB card untill I did s soft reset, they are very picky about picking up anything in the miniSD slot.
Tyr said:
My Wizard didn't even detect the my 2GB card untill I did s soft reset, they are very picky about picking up anything in the miniSD slot.
Click to expand...
Click to collapse
so where is a place where we can buy them that we wont get ripped off.
Well, I really only know of http://www.mobymemory.com/ but don't know what countries they ship to. I normally wait till new media appear on somewhere like expansys as they are reputable and reliable.
www.expansys.com
There are real 4GB cards out there but it is hard to tell if you are being ripped off or not...
i got mine from mobymemory, too. i got it within a 1 week after ordering (to germany) and it works perfectly in my wizard. it is quite slow though. at least i have 4gigs now.
Sounds good, I am really tempted at that price... Payed exactly that for my 2GB card about six months ago.
I have one on the way after ordering a SDHC from MemorySuppliers. I wound up ordering one from an ebayer called Quality Rams. $89 no shipping charge.
According to Memory Suppliers the Transend Card they sell another non SDHC card that will work priced at $79
Hey all, now I know jack stick when it comes to these devices, I've only recently bought it! I have the XDA Mini S (9100 as far as I know? Correct me if I'm wrong), and I bought a 4gb card off ebay for £32 from the USA, think it was about £25 without postage - ie, very cheap.
It works when connected to my pc, my friends XDA IIs, and my maths tutors XDA IIs (with the MiniSD to SD adaptor), however my Mini S doesn't like it. I managed to access it once, but now it just doesn't seem to know it's there, are there any tips on what I can do to get it working? I updated the firmware off the o2 site, I'm running:
ROM - 2.21.4.1 WWE ?
ROM date - 03/09/2006
Radio version - 02.07.10
Protocol version - 413.1.03
ExtROM version 2.21.4.101
(whatever that means )
Any tips on how I can get it working would be great. Thanks , Dom.
Dommo said:
Hey all, now I know jack stick when it comes to these devices, I've only recently bought it! I have the XDA Mini S (9100 as far as I know? Correct me if I'm wrong), and I bought a 4gb card off ebay for £32 from the USA, think it was about £25 without postage - ie, very cheap.
It works when connected to my pc, my friends XDA IIs, and my maths tutors XDA IIs (with the MiniSD to SD adaptor), however my Mini S doesn't like it. I managed to access it once, but now it just doesn't seem to know it's there, are there any tips on what I can do to get it working? I updated the firmware off the o2 site, I'm running:
ROM - 2.21.4.1 WWE ?
ROM date - 03/09/2006
Radio version - 02.07.10
Protocol version - 413.1.03
ExtROM version 2.21.4.101
(whatever that means )
Any tips on how I can get it working would be great. Thanks , Dom.
Click to expand...
Click to collapse
Yeah, try formatting the cards. I just received my two 4 GB Mini SD from mobymemory.com and when I tried to use them into my device, they won't recognize it but after formatting them it worked perfectly. I've read people complaining about speed but I'm happy with the speed as well.
I'm using one on my Universal and the other on Wizard.
I tried that and it still doesn't seem to work
I just tried putting it in then doing a soft reset. I need to try someone elses minisd card, to make sure it's not my device at fault. Would be a bummer if it is my card slot that's duffed!
I'll have a test of someone elses when I can find someone with a minisd card and let you know!
Thanks for the advice so far, Dom
Update on Quality Rams
They sent me the wrong card. I received a HC card, enen though their eBay add specifically said it was for the Cingular 8125. I got this tip directly from the forum on the HTC site.
They gave me no hassle in accepting a return.
Carrying on from before, the 4gb card works fine in my mates phone (Nokia 6280), and his memory card works perfectly in my 9100. So there must be a problem with my firmware being unable to recognise the 4gb card. Any ideas what firmware I can try? (stock is o2 XDA Mini S firmware, with the above - four posts up - version)
What firmware are you using KarmaNP?
Thanks.
Dommo said:
Carrying on from before, the 4gb card works fine in my mates phone (Nokia 6280), and his memory card works perfectly in my 9100. So there must be a problem with my firmware being unable to recognise the 4gb card. Any ideas what firmware I can try? (stock is o2 XDA Mini S firmware, with the above - four posts up - version)
What firmware are you using KarmaNP?
Thanks.
Click to expand...
Click to collapse
I'm currently using Faria's latest 3.3 on my wizard with 2.47 radio and
Helmi's CB on my Universal with 1.14 radio.
Hope this helps
I just downloaded the 8mb pool rom from here:
http://forum.xda-developers.com/showthread.php?t=291806
Ran the romupdateutility
ROM version is still 2.21.4.1 WWE
ROM date - 03/09/2006
Radio version - 02.07.10
Protocol version - 413.1.03
the ExtROM version has disappeared. So everything except ExtROM is the same?
Am I missing something blindingly obvious to people in the know or is there a problem? When I ran farias romupdateutility it showed that it was v3.3, but on the screen showing which firmware it will update from and to, it said v1.2 (from), and blank (to)? Is this the problem? I also tried to update to Radio version 2.47, and that didn't work at all, it had the blank update to, thing, again, and the phone turned off as the percentage screen appeared, and I had to remove the battery to get it back up and running. I feel so stupid!
And finally. Sorry if these are really dumb questions, I know how annoying newbies and their dumb questions are!
PS - memory card is still not recognised.
Dommo said:
Hey all, now I know jack stick when it comes to these devices, I've only recently bought it! I have the XDA Mini S (9100 as far as I know? Correct me if I'm wrong), and I bought a 4gb card off ebay for £32 from the USA, think it was about £25 without postage - ie, very cheap.
It works when connected to my pc, my friends XDA IIs, and my maths tutors XDA IIs (with the MiniSD to SD adaptor), however my Mini S doesn't like it. I managed to access it once, but now it just doesn't seem to know it's there, are there any tips on what I can do to get it working? I updated the firmware off the o2 site, I'm running:
ROM - 2.21.4.1 WWE ?
ROM date - 03/09/2006
Radio version - 02.07.10
Protocol version - 413.1.03
ExtROM version 2.21.4.101
(whatever that means )
Any tips on how I can get it working would be great. Thanks , Dom.
Click to expand...
Click to collapse
try installing wmstorage, insert your 4gb card, open wmstorage select sd card and activate, now connect your device to pc as a mass storage device and format there the drive once it is recognized. format it as fat32 with 512byte cluster and sector size..
yes guys its here :
http://www.geardiary.com/2007/01/04/the-spectec-sdg-810-gps-receiver-unboxed/
kalkanisvec said:
yes guys its here :
http://www.geardiary.com/2007/01/04/the-spectec-sdg-810-gps-receiver-unboxed/
Click to expand...
Click to collapse
Dont think it will plug into the MICRO SD Slot of the Hermes
well....does your hermes have an sd slot? nice find but not for the hermes....at least that model.
they do even have a version called sdg-811
look here : http://www.spectec.com.tw/sdg810.htm
hehe, look at that carefully. it is still only for SD and miniSD, not for microSD. You can put only microSD card inside adapter to have your external memory still inside - for navigation program, but final product is still only miniSD. correct me, if I am wrong...
kalkanisvec said:
they do even have a version called sdg-811
look here : http://www.spectec.com.tw/sdg810.htm
Click to expand...
Click to collapse
kalkanisvec said:
yes guys its here :
http://www.geardiary.com/2007/01/04/the-spectec-sdg-810-gps-receiver-unboxed/
Click to expand...
Click to collapse
Its even looks like a big pen marker for white board plug into your device. LOL
kalkanisvec said:
they do even have a version called sdg-811
look here : http://www.spectec.com.tw/sdg810.htm
Click to expand...
Click to collapse
Looking at the ad, it implies the package includes a micro-sd conversion card.
egypt123 said:
Looking at the ad, it implies the package includes a micro-sd conversion card.
Click to expand...
Click to collapse
nope it would look stupid and will probably break off. Think about it. Big SD to small MICRO SD....hmmmmm
I think that sinmae is correct - the product requires a SD or miniSD slot, but to compensate for the loss of the (mini)SD slot, it provides a microSD slot to put a microSD memory card into.
Such a shame, since I just sent my Garnin GPS 20SM back to Garmin yesterday for a RMA - it's not charging the phone properly. It seems silly to have to soft-reset my 8525 to have to get it to charge, when a USB cable connected to my PC works flawlessly every time. Oh well, here's hoping it was just a defective unit. *crosses my fingers*
-- Joe
@JoeVulture: most USB chargers wont work with the TyTn's due to the way HTC set up the mini-USB plug (there's loads of threads on it).
What a heap of crap! I will stick to my Rikaline bluetooth.
Just when I was gonna give up on waiting for a kaiser.
Hi,
I have installed WM6 on my Qtek 8500. Is it possible to use SDHC 8GB microSD on it?
/JR
If you have one, try it out and see. Let us know if it works!
I tried my 4G card and it didn't work
Oh well. At least we know the answer to that question, the 3125/Startrek doesn't have SDHC hardware.
Jozer99 said:
Oh well. At least we know the answer to that question, the 3125/Startrek doesn't have SDHC hardware.
Click to expand...
Click to collapse
hardware isnt problem. you need new MicroSD-card driver
...and are the drivers available? Current WM6 devices all support SDHC.
Erofich said:
hardware isnt problem. you need new MicroSD-card driver
Click to expand...
Click to collapse
@JesperRas,
As Erofich notes, the many people have gotten SDHC to work on WM6 ROMs that didn't initially support SDHC by installing the right driver. See the following thread for a .cab file download that worked on many devices:
http://forum.xda-developers.com/showthread.php?t=310456&page=4
I think the original device this driver came from may have been a PocketPC, but I recall in the thread that it worked in some Smartphones too. The cab file was even reported to work on some WM5 devices, so I tried it on my WM5 StarTrek, but no workee. However, I think this is worth another try now that we have WM6 on the StarTrek (thanks Erofich, and everyone else who worked on this - you rock!). I have no idea if it is the "right" driver or not, but maybe worth a try. So, anybody feel brave today and want to try this one? I haven't had time to flash WM6 yet (gonna get to that soon), but if anyone gives this a try, please let us know how it goes!
When the cab file didn't work on my WM5 StarTrek, it also removed regular microSD from being seen. But I just uninstalled the cab and restarted the phone and regular microSD came back. So probably not a lot of risk to try this, but who knows...?
If anyone wants to try a ROM w/SDHC support, let me know. I don't have any MicroSDHC cards to try.
GnatGoSplat said:
If anyone wants to try a ROM w/SDHC support, let me know. I don't have any MicroSDHC cards to try.
Click to expand...
Click to collapse
i'll be a guinea pig for the sdhc test, GnatGoSplat. it's been fun to be able to do something with this phone again. it's been collecting dust since i picked up my kaiser.
I'll whip one up tonight.
I'd be happy to test it in a couple of days aswell, i've got a 6gb microsdhc in my kaiser and I've just bought one of these phones of expansys for £69.95!!! great value if you ask me, especially for just carrying for work when i don't need all the functions of my kaiser but still like to have winmo. anyway first thing i'm doing when it arrives (should be friday hopefully) is cid unlock and winmo 6 so might aswell kill 2 birds with one stone and test this aswell if you want
DTMc
Here's a first effort:
http://rapidshare.com/files/93338388/sdhc_test1.rar
It's based on the ROM with Cingular bloatware.
GnatGoSplat said:
Here's a first effort:
http://rapidshare.com/files/93338388/sdhc_test1.rar
It's based on the ROM with Cingular bloatware.
Click to expand...
Click to collapse
damn, bloatware
update: no go. finds a 1gb microsd, but not a 4gb class2 microsd hc.
try this
http://ren.redsys.ru/_private/WM6StrTrk/SDHC Support Kit.cab
only for wm6
hey, just to let you know, tried both sdhc cabs, (the one at the begging of the thread and erfich's SDHC support kit) and thats a no go on both. running Erofich's wm6 v5c rom, task manager just reads storage card, unknown unknown unknow, and file manager dosen't have any folder for memory card any more. normal sd still works fine with the cabs installed though.
Tested using a normal 1gb MicroSD and a 6GB class 4 microSDHC
Thanks
Damian
(also a big thanks to Erofich for the great ROM, and for try to help and to support )
I've tried experimenting with several other drivers from different devices and no go (many won't even read regular SD).
It looks like the possibility of SDHC on the StarTrek might be as hopeless as the Tornado.
damiantmc said:
I'd be happy to test it in a couple of days aswell, i've got a 6gb microsdhc in my kaiser and I've just bought one of these phones of expansys for £69.95!!! great value if you ask me, especially for just carrying for work when i don't need all the functions of my kaiser but still like to have winmo. anyway first thing i'm doing when it arrives (should be friday hopefully) is cid unlock and winmo 6 so might aswell kill 2 birds with one stone and test this aswell if you want
DTMc
Click to expand...
Click to collapse
369.95 FOR 6Gb is good? :|
I prefer http://www.mobymemory.com/products/...SDHC)-memory-card-with-Sandisk-USB-reader.asp
but as they don't work in the Startrk it's fairly academic...
lol no I think you've read me wrong, I paid £69.95 for my 8500, the 6gb microsdhc I already had out of my kaiser, bought that back in december for £32 delivered from moby memory. Works great in my kaiser and my nikon d40, but no go for the 8500 unfortunetly
oh well, keep trying and as long as we don't give up we shall find a way... maybe lol
Damian
That's right, let's keepour fingers crossed. Something might break very soon (not meant figuratively!)
damiantmc said:
lol no I think you've read me wrong, I paid £69.95 for my 8500, the 6gb microsdhc I already had out of my kaiser, bought that back in december for £32 delivered from moby memory. Works great in my kaiser and my nikon d40, but no go for the 8500 unfortunetly
oh well, keep trying and as long as we don't give up we shall find a way... maybe lol
Damian
Click to expand...
Click to collapse
lol - I thought it unlikely anyone hadn't heard of Moby! Just ordered a 2Gb card for my 8500 as nothing bigger works at the mo.
Hopefully one of the clever buggers on here will get them working!
Hi,
I would like to ask, if somebody does know, if Micro SD WIFI exists and where to buy it. Is Micro SD same as Micro SDIO? I am really confused.
peter_nagy said:
Hi,
I would like to ask, if somebody does know, if Micro SD WIFI exists and where to buy it. Is Micro SD same as Micro SDIO? I am really confused.
Click to expand...
Click to collapse
Spectec should be coming out with MicroSD WiFi shortly. You can preorder it on the Expansys website.
As for MicroSD and MicroSDIO, read here.
peter_nagy said:
Hi,
I would like to ask, if somebody does know, if Micro SD WIFI exists and where to buy it. Is Micro SD same as Micro SDIO? I am really confused.
Click to expand...
Click to collapse
Does this mean that if I bought an "Micro SD WIFI" it will be able to use wifi on my Touch Dual?
ronnylaborada said:
Does this mean that if I bought an "Micro SD WIFI" it will be able to use wifi on my Touch Dual?
Click to expand...
Click to collapse
yes you will be able to use wifi
I am sure i read somewhere the touch dual does not have SDIO support...
thanks
thanks for replies, I will wait for reliese of those cards. if would be good to have wifi on the touch dual.
peter_nagy said:
thanks for replies, I will wait for reliese of those cards. if would be good to have wifi on the touch dual.
Click to expand...
Click to collapse
But you could have a long wait.
The Spectec card has been on pre-order for a long time at expansys, and remember that it'll take the place of any memory card that you may have installed. And they're going to be expensive if/when they do appear.
It would be great if they have a wifi card with atleast 2gig also in it
Hoping it will not cost too much!
i dont why they dont just produce one that goes in the usb port then sits all along side of device so as not to stick out, and even replace the battery cover with it for extra strength! or has this been done?
badaas said:
i dont why they dont just produce one that goes in the usb port then sits all along side of device so as not to stick out, and even replace the battery cover with it for extra strength! or has this been done?
Click to expand...
Click to collapse
Don't think the Dual (or any/many windows mobile devices) can act as a USB host though. It'd be a huge power draw though, maybe half your battery life?
It cant act as a usb host unfortunately. Its a long shot but i would personally hold off for a couple of months and see how this WIFI project unfolds before investing in something as expensive as these microsd wifi cards will be.
To answer an earlier comment about it being good if they started making micro sd wifi cards with built in memory, its been done before with normal sd cards, only trouble is that HTC devices dont like them!!
Spectec Mini SD WiFi Card, SDW-822
Hello all,
It is possible to buy it,
check this website
http://www.expansys.nl/p.aspx?i=125665
or
http://www.google.nl/search?hl=nl&q=Spectec+Mini+SD+WiFi+Card,+SDW-822&btnG=Zoeken&meta=lr=lang_nl
If you buy and test let me know please
do you know the different about MINI SD and MICRO SD???
Mini SD are bigger than Micro SD, so you can't use Mini SD on the dual.
3s this for real?
what exactly do these micro sd cards do? 3m just curious..
I stumbled on this:
http://www.spectec.com.tw/wlan.htm
Just wanted to know if it is worth it/works good.
I've used the mini version on another phone. It worked pretty good. Unfortunately, it looks like the micro card is longer then a normal card, so the startrek wouldn't have room for it.
Built-in SD can not be used!
That card is too long!
My English is not good!
there is a possibility...
first you have to make sure the port on the startrek is SDIO capable - if it is it looks possible with a little judicious cutting (dremel or something like that) that there is enough room between the battery and the sd port for the WIFI card to fit.
You would need to be *very* careful as there are components under that raised panel and you would also need to talk to a supplier of said card for its exact dimensions.
anyone game to try it?
Jemma xx
Very interesting.