HEllo,
i've a HTC 4350 and after used the JUMPSPL and appears the withe screen on the equipment, he turn off and now i can't turned on...because he don't start.
What can i do ??
Shouldn't exists a combinations of keys to made a RESET to the equipment ??
Please help me.
Wrong forum.
HTC P4350 is a Herald.
Related
Three days back,my SPV C550 suddenly hanged.I restart it by removing the battery.After reboot, it now only showing desktop with battery icon,signal strength indicator and the Unlock button(soft key) with Windows Mobile screen logo.I tried Hard reset, which cannot complete succeessfully.It also can't connect to Active Sync.
I also tried to flash the ROM from SD card,but it can't allow update because
my phone doesn't have a SuperCID.i unable to change CID because both SPV-Services and pdocread.exe need Active Sync connetion to work.
I searched all the forums,but didn't find any solution how to change CID without Active Sync.
Please help.
I had a similar problem with mine. The screen is the same as yours only varying with the sim card removed to a sim missing logo. Also mine makes the error/message noise repeatedly for a phew secoonds every half hour or so.
I just gave up in the end and admitted it was a brick
and the saga continues
Well the TyTn has died and I'm still waiting on a refund on a dodge wizard so its time to dig out the old SPVs I have a working Tornado (the right soft key has packed up thats a little annoying) so am trying to revive this hurricane.
I have linked some pictures of what is dose display and as you can see it will load into boot loader but due to not being ably to unlock it I cant flash any of the roms I have found.
I have been trying to fix this now for well bloody ages on and off but a good straight 12 hours just recently and to no avail.
In short I need a way to unlock the phone without active sync. The only way I can think of being able to do this is with some kind of specific software through boot loader
Any ideas?
HELP PLZ DEAD SPV c550 During WM6 Upgrade
i hv made a mistake while upgrading my spv c550(HTC Hurricane) to wm6.
i have flashed the wrong spl SPL 1.01.0109 on my fone. that spl was of htc typhoon.
now my phone is not booting up.
when i press the power button the fone gives the white disply and nothing else happens.
i cannot even get into bootloader.
the charging function works when the fone is turned off.
when i turn on the fone it dos nothing not even chaging.
is there any way to get my old fone back...
help plz
i shall be very thankfull to you.
Hi there,
I try to unlock my xda neo (PM300) (o2 germany). How newbies are - they have to try out ... an now i got my xda busted
It doesn't boot anymore. The last thing i did, i wanted to install iprophet. Now i see the o2-splash where the IPL, SPL und GSM is on the screen.
I can't get access to the device, because no windows, no active sync :/
Anyone who can help me?
First one i want to get an windows mobile at the device. After this i think about it to unlock ... xD (I want to put a TMobile card on it)
Sorry for my bad english... and thanks in advantage
Given that the device will partially boot up (it'll show the O2 screen), you should be able to recover the device. You will loose all of your data, but will save the device.
You will need to see if the device can enter bootloader. Hold down the camera button and soft reset. If a three colour screen appears you should be alright.
Have a look at this: http://wiki.xda-developers.com/index.php?pagename=Prophet_recovery
One question: what are the numbers next to IPL and SPL?
Greetings,
Strange HTC device came to me.. It's a GENE HT7xxx
doesnt turn on.. I've readed forums, using search button and applied things that I learn, but this is the problem:
ONBL 0.87.1000
SPL 1.07.1000 MFG
I applied everything: Nothing works.
Using RUU with HSPL Orekof / Olipro..... Nothing!! (says INVALID COMMAND)
Some help to fix it ?
I dont know if the device is strange or not, but its onbl is certainly messed up and cant be repaired without taking it to the service center.
Or through the JTAG method.
well, i ve tried JTAG method but I think im missing something.. I get no luck with that
Hello everybody,
Today I did the installation of CR86_THD_v6.5.0.0.3_Beta, the installation everything was quiet, I did all correct procedures and apparently everything was fine, in shelltool presented the complete message, and asked me to make a HARDRESET, did everything normal, he alloy, shows the bootscreen of HTC, then displays the screen where the version of IPL SPL GSM OS and it freezes, it does not come on screen, I wonder if someone has something that might help me.
He still carries the battery charger when connected to, and I imagine it just a mess because it binds to and usually only appears on the screen that the Qtek logo and the does not that screen TrueColor or it freezes on the screen that informs the version the SPL IPL, but I hope the lay experts help me ...
Thank you.
Sorry my poor english
problem solved
I am with the same problem. How did you solve this? Please help-me.
my dopod 818 pro(htc prophet g4) can't power on.
i need help to find the way to repair it.
i've looking in many pda forum, they talk about rewrite/reprogram the bootloader(i can't enter into bootloader mode).
they use something about jtag programmer, could anybody tell me how to use that thing(i'm newbi).
or is there anyway else to fix my problem???
I have the same problem with my Qtek S200 G4
this Jtag Pinout for HTC prohpet G4 ~ http://img.majidonline.com/show/183593/wizardjtagpinsis8.jpg
ROM Upgradation Failed
Dear All,
I was trying to upgrade my dopod 818 pro ROM version, but unfortunatly my connect breaked in the mid of process, due to that lost everything, even my previos OS too. and now i am unable to restart my mobile.whenever i am trying to on it, its showing only DOPOD on the disply may u plzz help me to recover my old settings?? i had already done the hard resett, but Result is NILL...
aadi1 said:
Dear All,
I was trying to upgrade my dopod 818 pro ROM version, but unfortunatly my connect breaked in the mid of process, due to that lost everything, even my previos OS too. and now i am unable to restart my mobile.whenever i am trying to on it, its showing only DOPOD on the disply may u plzz help me to recover my old settings?? i had already done the hard resett, but Result is NILL...
Click to expand...
Click to collapse
try reflash with the official rom