since the kaiser has the same cpu as the niki i tried this modified WM5Storage for the Kaiser : http://forum.xda-developers.com/showthread.php?t=349143&page=5&highlight=WM5torag
but it doesn't work on the niki, i get lots of io errors..
did anyone suceed with wm5storage or is there no solution ?
Nop, as I said in my post in Niki section, neither wm5torage or Card Export II are working... lots of IO errors, unable to umount the device (on my linux box). Maybe it's because I've an SDHC sandisk 4Go....
So, I can't connect my dual to my linux box (I have to take an SD card adapter in order to be able to do some files transferts).
if someone has the solution....
(PS : On the wm5torage website 'modaco', the maintener said that it depends of the device, depends of drivers...)
See my previous post here :
http://forum.xda-developers.com/showthread.php?t=355724
the 4GB sdhc is not the problem, i have a normal 2GB SD card...
so the only hope is that softsic releases an update to enable cardexport on the niki
I have card export v3.12 and its working for me since v3.7
I just have problems when the trials stop working after a month, but that is another issue...
wm5torage doesnt work on my niki, but card export II works so well
Related
I have an iPAQ 3660 with a pcmcia/battery sleeve. The sleeve works perfectly with pc card modems, network cards etc, also when using a pcmcia to cf adaptor I am able to plug in cf memory cards, all no problem. I bought a pc card type 2 ata flash storage of 1024megabyte by Kingston technology. Part number DP-ATA/1024. Now this is claimed as an ata compliant device and when I plug it into my laptop it is seen right away and formats to the correct size. However when I plug it into the ipaq sleeve, I get nothing, no recognition, no prompt for a driver and not visible in the system. I downloaded a program called cardprobe, this program actually was able to interrogate the card and give me all the info. I thought there must me a problem with the ata driver and so I downloaded a copy of atadisk.dll for microdrives, as soon as I copied this to the windows directory the card was seen, but only HALF the memory, exactly 50%. Can anybody throw any light on this. I have tried the original 1.77 rom, the wm2002 rom and also the upgrades and none can deal with this card until I use the microdrive dll which is modified from the original. I would like to use all the memory. :?:
Hello guys, I tried to upgrade on my XDA ( Qtek 1010 ) from Pocket PC 2002 to 2003 for some reason it installed but on the boot up of 2003 it just stops and doesn't go farther.
I'm trying to flash it and I got one problem, I cannot put the wallaby patch on my MMC card with XDAarit.
I wanted to know, do you have to use SD card for that because only SD can contain keys ( Headers ) ?
If yes I hope I get an SD card tomorrow and hopefully fix it.
Hi all,
Following problem:
- Qtek 2020 (or 2020i), combined with a SD-card , TomTom Navigator 5 and own software
1. Qtek 2020(i) works fine with SD, TomTom 5
2. Qtek 2020(i) works fine with SD, own software
3. Qtek 2020(i) works fine with SD, TomTom 5 and own software ONLY WHEN THE SD-card is slow (less then 40x)
We tested much different SD-card with different chipsets and only the real slow cardtypes work. The problem is that those cards aren't available anymore on the market, so we are looking for a solution to slow-down the SD I/O speed to the card.
How can this be done in Windows Mobile 2003 (se)??
Thanks for any solution or tricks to solve this problem!
Sam
as title, is anyone have any idea how to make USB to MicroDrive working on AP4 Rom?
I could use the USB-to-PC to setup as a card reader which is USB to MicroSD but not MicroDrive.
You will need to change
HLKM\Drivers\USB\FunctionDrivers\Mass_Storage_Class\DeviceName to DSK1:
it will work fine - transfer speed is also good
If you want storage card later you will need to change back to DSK2:
It would be nice if we can get this as settings in AthenaConfigApp
Thanks!!!!!!!!!!!!!!!!
miletb said:
You will need to change
HLKM\Drivers\USB\FunctionDrivers\Mass_Storage_Class\DeviceName to DSK1:
it will work fine - transfer speed is also good
If you want storage card later you will need to change back to DSK2:
It would be nice if we can get this as settings in AthenaConfigApp
Click to expand...
Click to collapse
good useful post thank you, needed this myself!
Jay
It is worth noting that when the USB to PC option is turned on as Data Device and connected to your computer via USB, the MicroDrive will dissapear from the device side. Disconnect the USB cable and refresh your app (File Explorer, etc.) to get it to show back up.
Copying files to/from with this option is very fast.
Thank you this helps!!!! Good info.
How do I make this kind of setting change in my athena?
Is there a program for this?
miletb said:
You will need to change
HLKM\Drivers\USB\FunctionDrivers\Mass_Storage_Class\DeviceName to DSK1:
it will work fine - transfer speed is also good
If you want storage card later you will need to change back to DSK2:
It would be nice if we can get this as settings in AthenaConfigApp
Click to expand...
Click to collapse
In programs/system you will find regedit.
Choose from the small drop down box HKLM and follow the path.
Tap and hold "device name", then "edit"
Use WM5torage 1.73
I have found that WM5torage 1.73 is very reliable and also precise. You can switch between MicroDrive and storage card. I have used version 1.73 and refused to upgrade to higher version.
panvita said:
I have found that WM5torage 1.73 is very reliable and also precise. You can switch between MicroDrive and storage card. I have used version 1.73 and refused to upgrade to higher version.
Click to expand...
Click to collapse
I used WM5torage 1.73 to smoothly transfer the whole MicroDrive files to PC by using WM5torage 1.73 this morning. After installed some apps to the MicroDrive this afternoon, I discovered WM5torage 1.73 refused to work with MicroDrive by saying that MicroDrive appears not to be properly formatted, it may contain operating system, and by using WM5torage 1.73 may damage the operating system. I still pressed "OK", and device hung. I have never encountered such problem when I used AP 3.0 before. After I switched USB to PC, no issue at all to transfer the files between the device and PC. Therefore, I just use WM5torage 1.73 to connect to SD, and use USB to PC to connect MicroDrive.
Try WM5torage 1.72 instead, is working with my Athena
Attached
PBL1 said:
Try WM5torage 1.72 instead, is working with my Athena
Attached
Click to expand...
Click to collapse
Thank you, you are right. It did work.
Yep, works for me
I don't ever use an SD card (not yet anyways)
USB to PC didn't work. Device manager stated that the USB mass storage device driver didn't work properly and I could't see my Athena in windows explorer
Thanks to your little reg edit. It works now: windows recognizes a mass storage device to which I copied a 422MB folder in 128seconds
Thanks man
By the way, this was my first ever reg edit 'Big Smile'
miletb said:
You will need to change
HLKM\Drivers\USB\FunctionDrivers\Mass_Storage_Class\DeviceName to DSK1:
it will work fine - transfer speed is also good
If you want storage card later you will need to change back to DSK2:
It would be nice if we can get this as settings in AthenaConfigApp
Click to expand...
Click to collapse
Hi,
I am trying to install hard spl on my hermes, checked everything (activesync etc.) but as soon as the installation starts, am being asked to allow the use of the programs on the hermes....the hermes comes up with a soft return...and afterwards I get an connection error... Any help will be highly appreciated...
Kind regards,
Anton Will van Zoelen
PS used version 7 of hardspl
Go to page 116, post 1160 of the Hard SPL thread for instructions on using SD Card method. You need a 2Gb or less card and it must be formatted FAT32.
Hi,
Thanks for your quick response. Will do...
Kind regards,
Anton Will van Zoelen
Hi,
Did excactly as was said but when I started the program SSPL-HERM.exe the pda did soft reset and nothing happended. Did not format the micro SD as it is FAT32.
Any advice....?
Thanks...
Kind regards,
Anton Will van Zoelen
SSPL.exe must be on the phones memory when started or it won't work, Are you sure that the sd card is Formated FAT32 as it comes default FAT. Check you renamed the .nbh file properly - hermimg.nbh .Also sd card MUST be 2Gb or less...
Cheers...
This exact thing happened to me. For some reason it isn't compatible with windows 7 or vista. If you can't get it to work on the sd card, try doing it on a computer with windows xp, make sure you have .net update on it too. Or you could try xp mode on windows 7. I ended up just using xp on my netbook.
Alex1261 is correct -- you could install and use Windows XP mode assuming your current hardware configuration is compatible. To learn more about Windows XP mode, please go here: http://bit.ly/lvAjC
Jessica
Microsoft Windows Client Team
windows xp mode uses virtualization. i'd reaaallly recomend against that, and even then i don't know if you can bridge the USB ports.
point: use xp on standard hardware. netbook, as alex said is a good way to go.
use the [Easy Hard-Spl v7 beta v0.1] by qwasde2
it,s really usefull i tryed it,s by me
it,s for win XP and vista and se7en users
i,am not joking here is the link
http://forum.xda-developers.com/showthread.php?p=5136858#post5136858