I can flash any rom (via activesync) to my softbank X01HT (radio 1.14.01.10) but i cannot flash the Hard-SPL-V7 (error 260), the phone was lost connection with pc when enter bootloader.
I've already unlock SuperCID using HTC_Hermes_SIM_CID_Unlock_v3a but the M3100v6Unlock cannot connect to the phone.
Pls help me. I've already purchased unlock file from imei-check and want to unlock my phone.
Thanks in advance!
Related
The program XDAunlock doesn't get then unlock code (message: see above). What can I do?
Which ROM-Version have you installed?
Try follwing this:
http://wiki.xda-developers.com/index.php?pagename=UnlockWiz
Stefan
Yes, I tried this program too, but it doesnt run, message: " 'XDA-developers-SER-v12' is not a valid pocket pc-program". My ROM-version is 3.14.16 GER.
With this ROM VErsion you can not use the unlock tool. You have to flash a new ROM to your device, or stay locked.
For flashing the XDA-Developers ROM, connect your Device via ActiveSync to your PC and run the XDA-developers-SER-v12.exe on your PC. That will flash a new ROm and on the first boot it will unlock your device....
Stefan
Great! It works! Thank you very much!!
I currently have the above using Rom verdion 3.16.32 ENG. I have tried downloading the unlock programme without succesess. I get the message 'not a valid Win 32 application' Can anyone help so Ican unlock this devise from o2 network
Thanks
First of all welcome to the forum.....
Second:
Would you be so kind to make a backup of the ROM and send it to me?
Process how this can be done is here:
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashXDATool
For unlocking I´m nearly 100% sure that you require a different ROM on your device. The unlock tool you have doanlooaded should be run on your Wallaby device....
But it requires the Wireless modem function in the ROM, and i think this is not available in your ROM. For unlocking you have to flash a new ROM.
Therefore download the Special Edition ROM
ftp://xda:[email protected]/Wallaby/ROM/Special/special_rom_1.2.exe.zip
Unzip the file, connect your device via ActiveSync to your PC and run the Exe file on your PC.
Than just folllow the instructions on the screen.....
Regards
Stefan
I have An HTC (PM2oo) device locked to T-Mobile. It has code on it and i need to do simunlock on it. please help me. I also have HTC 2125 for sim unlock. I copied XDA sinlock exe. into the phone and ran it in the phone but no success.
Hi
Im hopeing someone can help me I know this issue has probably been discussed loads of times and im a muppet for doing it, I was looking at different ROM's for my Orange M3100 and thought I would go for the IMATE JASJAM ROM so I could get MSN messenger .... I unfortunatly selected the TELSTRA 1.06 Bootloader ROM and downloaded instead of the 1.04 ( I should have read the posts on this ROM before!). Now I am stuck in bootloader 1.06 and as I have read the only way to get back to 1.04 is to flash with a ROM that is the same as my carrier (Orange UK).... the only Orange ROM is the Romanian one thats just been put on the WIKI, I have tried with this but its coming up Vendor ID error... if anyone can help or tell me how I can go back to 1.04 id be grateful? if not do I just have to wait until orange UK bring out a ROM with bootloader 1.06 ????
Thanks a lot ! James UK
Same problem with Cingular bootloader 1.06
I've the same problem with Cingular 1.34 bootloader 1.06, I try to downgrade with same bios CID (CWS__001 as I read on this forum) to bootloader 1.06 but I receive an error "WRONG VENDER ID" (also if i leave connected my PDA and I restart RUU utility it give me the same error)
I've also tried to install another vendor bios with bootloader 1.06 as suggested but I receive the same error message!!!
Emanuele
Unfortunately, you're stuck unless you either a) wait for a bootloader for your CID or b) pay the $38 to do the super-CID unlock. There's a thread on that stickied, so if you decide to do it, help them out by doing the usb capture.
Thanks... I have already unlocked the device with IMEI-Check.co.uk do you mean this? If I have unlocked it then do you think I should run IMEI check again on the device and it may unlock the CID ? cheers, James
If you run the imei tool again (with the latest version of theire software) it will reverse your bootloader to 1.04 and make your device super CID
I tried to unlock Hermes Orange SPV M3100 withe the latest unlocker v3a but couldn't unlock...After run auto unlock v3a, and run hermes unlock at the end, it says unlock successfuly but the phone still asks to enter unlocking code..i've been reading the hernes unlock threads but could find the solution to unlock it..this hermes has ipl 1.01 and spl 1.40 0ipro...anyone knows the way to unlock please help..thanks
sorry..problem solved, phone's unlocked...don't know what happened first but after hard reset phone, insert original sim and repeat procedure, phone is unlocked after that.
hi, i have the same problem. When i m flashing with Auto_unlock_3a_pof , i must insert original sim (orange) or no?
thanks
hi, I had the same problem. the unlocker went thru the procedure as successful, but was still locked to orange and asked for the code.
I had ran it without any sim.
after I did a hard reset and put in an orange sim, then ran it. it was ok.
unlocked. thanks.
you gotta give LOTS of details about your problem. there are literally hundreds of possibilities if you give us no details about what you did, what went wrong, during what stage... have u set up correctly, did you flash hardspl, was your battery full, did you read instructions well or just skim and jump ahead?
i hav same problem...."--------------------------------------------------------------------------------
I tried to unlock Hermes Orange SPV M3100 withe the latest unlocker v3a but couldn't unlock...After run auto unlock v3a, and run hermes unlock at the end, it says unlock successfuly but the phone still asks to enter unlocking code..i've been reading the hernes unlock threads but could find the solution to unlock it..this hermes has ipl 1.01 and spl 1.40 0ipro...anyone knows the way to unlock please help..thanks""" plz help me
Hi all,
I just bought the Olinex SimUnlocker and for some reasons when I try to unlock the radio I get an error 226 at 100% of the flash process.
Then my phone reboot and I'm stuck to the bootloader screen.
The only way to make my phone work back is to flash it with my carrier's ROM.
But once I reflash the SPL + sim unlock with the Olinew unlock I get an error at 100%.
My raphael was alrealy security unlocked with Olipro.
What can I do to avoid this error?
Please help
Thanks in advance
Are you talking about how to use olinex tool ? Or that you're trying to flash a radio after using olinex tool?