A few newb questions here. One, Will all of the Roms in here work on a XDA o2 Neo? I realy wan't WM6 with a touch interface.
Two, I tried opening the ROM Update Utility I get a error saying "The application has failed to start because RAPI.dll was not found. Re-installing the application may fix this problem." < What does that mean?
yupp.
i am running windows mobile 6 on my xda neo atm.
there are even german versions out.
just ask anime lover or check ppcfreaks.de
samson_420 said:
A few newb questions here. One, Will all of the Roms in here work on a XDA o2 Neo? I realy wan't WM6 with a touch interface.
Two, I tried opening the ROM Update Utility I get a error saying "The application has failed to start because RAPI.dll was not found. Re-installing the application may fix this problem." < What does that mean?
Click to expand...
Click to collapse
1) Yes, all roms can be used but read carefully about "how to update" (there is a sticky post about that), there are two different ways on how to update...
2) IMO that means you don't have activesync installed (you must use an actual version)...
Alternative.......
invd said:
1) Yes, all roms can be used but read carefully about "how to update" (there is a sticky post about that), there are two different ways on how to update...
2) IMO that means you don't have activesync installed (you must use an actual version)...
Click to expand...
Click to collapse
Or may be you can have a look here, too.
http://forum.xda-developers.com/showthread.php?t=353547
Enjoy~~~
I looked through all the sticky threads and the wiki, and it mostly makes sense now.
But, what is activesync? I have not seen a reference anywhere to it, to what I recal.
And what about the error that I am getting when trying to open the ROM update utility?
samson_420 said:
I looked through all the sticky threads and the wiki, and it mostly makes sense now.
But, what is activesync? I have not seen a reference anywhere to it, to what I recal.
And what about the error that I am getting when trying to open the ROM update utility?
Click to expand...
Click to collapse
ActiveSync is a piece of MicroSoft software wich connects your PPC to your PC. It is so elementary that it isn't mentioned in the guides. For every connection you want to make between PC and PPC you will need it. If not, your PPC cannot connect in a normal way to your PC. You can download ActiveSync for free at MS Downloadcentre.
As for the error, as said before it looks like ActiveSync isn't installed and therefore the connection cannot be made due to missing drivers.
Thanks a lot for the info, I realy don't know anything at all about this phone yet realy.
Related
New to the forums but read and searched a lot before posting.
I want to load Hard SPL but after the loader says "verifying information on the Hermes," it gives me an Error [240]: file open.
Any ideas? TY
Nothing? Help me out
First off , post your question in the offical thread.
Second, did you follow the instructions precisely?
It isn't hard to do.
allan1 said:
First off , post your question in the offical thread.
Second, did you follow the instructions precisely?
It isn't hard to do.
Click to expand...
Click to collapse
I got this error following the instructions, yes
he's probably using Vista
He isn't... He's using XP
josh054 said:
He isn't... He's using XP
Click to expand...
Click to collapse
Oh I see now... file open error.
you've got issues with your user permissions mate, I suggest doing this while logged on as admin, or failing that, run it all from the root of your HDD
I had this same error as well I reccomend what he said above also Make sure no firewalls are up AT ALL !
My firewall is what gave me this error message ... Hope this Helps
Aha! My firewall is on... I'll take it off and try it again.
Thanks you two... I'll report back
Yeah IT usually is the firewall.... Good Luck Bro And hope it works for you
Worked! Thank you
Error [240]: File open
The update utility can not open the requested file. Please check your update utility.
Get this error. I have good synchronization.
Go to page 116 of this thread - http://forum.xda-developers.com/showthread.php?t=296722
Its post #1160, you don't need to use the pc at all....
I prefer to use the sd card method to install os's too as I personally find it safer..
Cheers...
I have the same thing utility error 240. I turn off the firewall, the active sysc is good, and able to flash kaiser-HardSPLv1 but unable to flash new rom due to the 240 error. Help please?
siracer27, this is the Hermes forum... Can't really help with Kaiser...
Hope you didn't install Hermes Hard SPL on your Kaiser cos you will end up with a brick if you did...
I understand this hermes forum but try to search for error 240 and wasn't able to find it except here. any help, i have att tilt..
Only thing I can suggest is, if you're using XP, then upgrade the .net framework to 3.5.
Cheers...
after installing any of the new roms my phone constantly crashes, and i dont know why...
is there a way to pull up an error log? or someone who would know how to stop it from crashing?
ive tried, DCD 2.1, and nueROM v2, they both crash on me.
searched around, and it said i need to use a relocker after flashing the custom rom?
but i cant find a relocker for the titan.
Berserk87 said:
searched around, and it said i need to use a relocker after flashing the custom rom?
but i cant find a relocker for the titan.
Click to expand...
Click to collapse
Have you thought about searching for the term...relocker...? Just a guess.
actually i searched "titan relocker"...
and im actually wanting someone to confirm that could be the problem before i waste another 40 minutes of my life.
now im sad, are you happy?
Yes, yes I am. I had the same problem day one. If the SPL doesn't match up right, your phone will freeze minute or two after it starts up. Mine would not as long as a USB cable was plugged in. Try using this.
Hard-SPL-240-MFG.exe
yes, mine seems fine, then i unplug it and it crashes over and over again...
ok...so im using that as an unlocked which is flashing the spl.
then install the ROM, then flash the radio and it should stop crashing?
yes.
(a post must have 10 characters)
rigg419 said:
yes.
(a post must have 10 characters)
Click to expand...
Click to collapse
hahaha
k, ty, i was using Hard-SPL-240-MFG before, but i'll try this one, even though they look the same.
WOW>.........
ive been trying to run "ROMUpdateUtility" in that folder....i was supposed to be using "titanunlocker"
k i ran it.
its now telling me, "cannot open usb" after i disabled activesync through usb
oo ya, im on vista
*Sigh* Honest helpful suggestion...don't mess with you're phone anymore. It was written in quite a few threads that Windows Vista is harder to do certain things with and will need special drivers.
i have a pc running xp, i was just being lazy, ill wait till tomorrow then redo this stuff.
limezednem said:
*Sigh* Honest helpful suggestion...don't mess with you're phone anymore. It was written in quite a few threads that Windows Vista is harder to do certain things with and will need special drivers.
Click to expand...
Click to collapse
"when all else fails, read the instructions"
everytime i run this new unlocker it reboots in tricolor screen with spl-1.20 instead of 2.4
Used titanunlocker.bat and worked
My rom update failed, i tried 2 recover but it doesn't work.
1. i tried to reinstall the rom with ROMUpdateUtility,
but he says their is no previous version
2. i press update, again no current image
3. more then 0% i can't get
4. after 30 minutes still 0%, then suddenly
This keeps on going, a restore doesn't work
PLEASE HELP ME!!
please read the hardspl carefully ... then try again!
Are you using Vista? If so Vista cannot communicate with the device in Bootloader mode meaning you cannot update your phone. Get XP you will have alot less problems and it will work. Vista is just not worth hassel as its only really a fancy XP with some extras chucked in.
Kurt
NetrunnerAT said:
please read the hardspl carefully ... then try again!
Click to expand...
Click to collapse
where can i find the notes about hardspl?
rumble291 said:
Are you using Vista? If so Vista cannot communicate with the device in Bootloader mode meaning you cannot update your phone. Get XP you will have alot less problems and it will work. Vista is just not worth hassel as its only really a fancy XP with some extras chucked in.
Kurt
Click to expand...
Click to collapse
not true, I have used 3 different vista machines to flash roms on many occasions and have never encountered any problems, i also have read messages from several other people that have never had a problem
NetrunnerAT refers to this post http://forum.xda-developers.com/showpost.php?p=1777082&postcount=1
oké this one was fixed until an hour ago now i can't boot
HTML:
http://forum.xda-developers.com/showthread.php?p=2092039#post2092039
kerrance76 said:
not true, I have used 3 different vista machines to flash roms on many occasions and have never encountered any problems, i also have read messages from several other people that have never had a problem
Click to expand...
Click to collapse
Yes but you need to follow a tutorial to get it to work on Vista. Basically its easier on XP and you will have the least problems. You using Hard-SPL?
ok ive searched everywhere and have not found a single person with this problem.
when i try to use the ruu thing it gets to the receiving information part and then gives me error 260. now that would be ok if i had vista. but i dont. i have xp.
i have the new hard-spl on it.
so im not sure whats going on. any suggestions?
isaacfank said:
ok ive searched everywhere and have not found a single person with this problem.
when i try to use the ruu thing it gets to the receiving information part and then gives me error 260. now that would be ok if i had vista. but i dont. i have xp.
i have the new hard-spl on it.
so im not sure whats going on. any suggestions?
Click to expand...
Click to collapse
If you learn to read & search properly 1st then you wouldn't have this problem! follow this link....... http://forum.xda-developers.com/showpost.php?p=1876442&postcount=5 & Mr Vanx's upgrade Guide here http://forum.xda-developers.com/showthread.php?t=299462
MODS, Please close this useless thread!
hey all! great forum... former se x10 mini user... getting my atrix today!
my main question is: i want to install greyblur after rooting but there are always warnings about not installing it on the BELL version... yet i see, via their signatures, that many bell users have it installed... the guide for greyblur does not have specific instructions for bell, just has big warning in red saying not to install it on bell!
so how do i get it working?? what do i need? i'm pretty handy with android, so no need to have crazy detailed help...
thanks everyone! looking forward to learning more and more about this great device!!
ryan
watchyourbreath said:
hey all! great forum... former se x10 mini user... getting my atrix today!
my main question is: i want to install greyblur after rooting but there are always warnings about not installing it on the BELL version... yet i see, via their signatures, that many bell users have it installed... the guide for greyblur does not have specific instructions for bell, just has big warning in red saying not to install it on bell!
so how do i get it working?? what do i need? i'm pretty handy with android, so no need to have crazy detailed help...
thanks everyone! looking forward to learning more and more about this great device!!
ryan
Click to expand...
Click to collapse
See the thread called "SBF/root/deodex 2.1.1 SBF" or something along those lines (in this forum). In order to get greyblur/GingerBlur working on a bell phone you have to flash an international SBF file. Right now the most current is 2.1.1, a generic SBF (leaked from France). Just be warned that flashing this will void your warranty. However, it hasn't caused any issues itself and wont CAUSE anything on your device to fail at all, if you get into trouble its most likely just bad luck with hardware and if you REALLY need to return your phone there is a general way to make it seem like you've gone back to stock, that you can do with the help of forum members here if needed.
Not trying to scare you off, I've done this myself. I'm just making sure you understand the risks. Hope this post helps you understand what you're getting into and where to go for further info.
Also, this should be in Q&A section, not dev.
Sent from my MB860 using XDA Premium App
not scared at all! thanks for the PERFECT response!
Moved to proper forum.
ok, i'm going through the steps but for some reason the x64 drivers won't install (yes i have 64-bit windows.). says this:
"The system administrator has set policies to prevent this installation."
i assumed they weren't required.
nothing happens when i run rds before plugging in phone. when i reboot the phone, i see the rds protocol message, i run rds on my pc, plug in the phone and nothing happens....
thoughts?
I know nothing about windows sorry bruvva
I do know that once you are running a p rom pretty much everything becomes compatible
Sent from my Googletron
watchyourbreath said:
ok, i'm going through the steps but for some reason the x64 drivers won't install (yes i have 64-bit windows.). says this:
"The system administrator has set policies to prevent this installation."
i assumed they weren't required.
nothing happens when i run rds before plugging in phone. when i reboot the phone, i see the rds protocol message, i run rds on my pc, plug in the phone and nothing happens....
thoughts?
Click to expand...
Click to collapse
well the drivers do need to be installed, you can find the necessary drivers in an executable package here although i can't tell you whether admin restrictions will block that too. might be easiest to find a PC where you can do stuff as an admin depending on your current system's configs.
once drivers are installed your PC will recognize device when in RSD mode.
I would assume that the login on your comp is not set as an administrator. You have to be logged on as an administrator to modify system files or drivers in windows.
You could also try right clicking the usb driver installation exe and choose "run as administrator".
Sent from my Cool Blue Atrix on Bell using the XDA Premium App.
Hey
Regarding the Win 64 driver, I had the same issue, until I realised the link given in the thread about 2.1.1/Greyblur for the driver lead to a corrupted file (~ 500 kb) even using a download manager. I downloaded them from elsewhere (Motorola Website) and the error message disappeared without having anything else to do.
Hope that helps!
Guillaume
Actually got the whole thing going a while back... sorry for not checking back!
I am officially enamoured by this phone......... the start of a beautiful and complex relationship ...
And yeah, I suspected that it had something to do with corrupt file... tried a few diff sites but all seemed the same... eventually tried a diff usb port and it worked...
Sent from my MB860 using XDA App