Related
New to the forums but read and searched a lot before posting.
I want to load Hard SPL but after the loader says "verifying information on the Hermes," it gives me an Error [240]: file open.
Any ideas? TY
Nothing? Help me out
First off , post your question in the offical thread.
Second, did you follow the instructions precisely?
It isn't hard to do.
allan1 said:
First off , post your question in the offical thread.
Second, did you follow the instructions precisely?
It isn't hard to do.
Click to expand...
Click to collapse
I got this error following the instructions, yes
he's probably using Vista
He isn't... He's using XP
josh054 said:
He isn't... He's using XP
Click to expand...
Click to collapse
Oh I see now... file open error.
you've got issues with your user permissions mate, I suggest doing this while logged on as admin, or failing that, run it all from the root of your HDD
I had this same error as well I reccomend what he said above also Make sure no firewalls are up AT ALL !
My firewall is what gave me this error message ... Hope this Helps
Aha! My firewall is on... I'll take it off and try it again.
Thanks you two... I'll report back
Yeah IT usually is the firewall.... Good Luck Bro And hope it works for you
Worked! Thank you
Error [240]: File open
The update utility can not open the requested file. Please check your update utility.
Get this error. I have good synchronization.
Go to page 116 of this thread - http://forum.xda-developers.com/showthread.php?t=296722
Its post #1160, you don't need to use the pc at all....
I prefer to use the sd card method to install os's too as I personally find it safer..
Cheers...
I have the same thing utility error 240. I turn off the firewall, the active sysc is good, and able to flash kaiser-HardSPLv1 but unable to flash new rom due to the 240 error. Help please?
siracer27, this is the Hermes forum... Can't really help with Kaiser...
Hope you didn't install Hermes Hard SPL on your Kaiser cos you will end up with a brick if you did...
I understand this hermes forum but try to search for error 240 and wasn't able to find it except here. any help, i have att tilt..
Only thing I can suggest is, if you're using XP, then upgrade the .net framework to 3.5.
Cheers...
A few newb questions here. One, Will all of the Roms in here work on a XDA o2 Neo? I realy wan't WM6 with a touch interface.
Two, I tried opening the ROM Update Utility I get a error saying "The application has failed to start because RAPI.dll was not found. Re-installing the application may fix this problem." < What does that mean?
yupp.
i am running windows mobile 6 on my xda neo atm.
there are even german versions out.
just ask anime lover or check ppcfreaks.de
samson_420 said:
A few newb questions here. One, Will all of the Roms in here work on a XDA o2 Neo? I realy wan't WM6 with a touch interface.
Two, I tried opening the ROM Update Utility I get a error saying "The application has failed to start because RAPI.dll was not found. Re-installing the application may fix this problem." < What does that mean?
Click to expand...
Click to collapse
1) Yes, all roms can be used but read carefully about "how to update" (there is a sticky post about that), there are two different ways on how to update...
2) IMO that means you don't have activesync installed (you must use an actual version)...
Alternative.......
invd said:
1) Yes, all roms can be used but read carefully about "how to update" (there is a sticky post about that), there are two different ways on how to update...
2) IMO that means you don't have activesync installed (you must use an actual version)...
Click to expand...
Click to collapse
Or may be you can have a look here, too.
http://forum.xda-developers.com/showthread.php?t=353547
Enjoy~~~
I looked through all the sticky threads and the wiki, and it mostly makes sense now.
But, what is activesync? I have not seen a reference anywhere to it, to what I recal.
And what about the error that I am getting when trying to open the ROM update utility?
samson_420 said:
I looked through all the sticky threads and the wiki, and it mostly makes sense now.
But, what is activesync? I have not seen a reference anywhere to it, to what I recal.
And what about the error that I am getting when trying to open the ROM update utility?
Click to expand...
Click to collapse
ActiveSync is a piece of MicroSoft software wich connects your PPC to your PC. It is so elementary that it isn't mentioned in the guides. For every connection you want to make between PC and PPC you will need it. If not, your PPC cannot connect in a normal way to your PC. You can download ActiveSync for free at MS Downloadcentre.
As for the error, as said before it looks like ActiveSync isn't installed and therefore the connection cannot be made due to missing drivers.
Thanks a lot for the info, I realy don't know anything at all about this phone yet realy.
after installing any of the new roms my phone constantly crashes, and i dont know why...
is there a way to pull up an error log? or someone who would know how to stop it from crashing?
ive tried, DCD 2.1, and nueROM v2, they both crash on me.
searched around, and it said i need to use a relocker after flashing the custom rom?
but i cant find a relocker for the titan.
Berserk87 said:
searched around, and it said i need to use a relocker after flashing the custom rom?
but i cant find a relocker for the titan.
Click to expand...
Click to collapse
Have you thought about searching for the term...relocker...? Just a guess.
actually i searched "titan relocker"...
and im actually wanting someone to confirm that could be the problem before i waste another 40 minutes of my life.
now im sad, are you happy?
Yes, yes I am. I had the same problem day one. If the SPL doesn't match up right, your phone will freeze minute or two after it starts up. Mine would not as long as a USB cable was plugged in. Try using this.
Hard-SPL-240-MFG.exe
yes, mine seems fine, then i unplug it and it crashes over and over again...
ok...so im using that as an unlocked which is flashing the spl.
then install the ROM, then flash the radio and it should stop crashing?
yes.
(a post must have 10 characters)
rigg419 said:
yes.
(a post must have 10 characters)
Click to expand...
Click to collapse
hahaha
k, ty, i was using Hard-SPL-240-MFG before, but i'll try this one, even though they look the same.
WOW>.........
ive been trying to run "ROMUpdateUtility" in that folder....i was supposed to be using "titanunlocker"
k i ran it.
its now telling me, "cannot open usb" after i disabled activesync through usb
oo ya, im on vista
*Sigh* Honest helpful suggestion...don't mess with you're phone anymore. It was written in quite a few threads that Windows Vista is harder to do certain things with and will need special drivers.
i have a pc running xp, i was just being lazy, ill wait till tomorrow then redo this stuff.
limezednem said:
*Sigh* Honest helpful suggestion...don't mess with you're phone anymore. It was written in quite a few threads that Windows Vista is harder to do certain things with and will need special drivers.
Click to expand...
Click to collapse
"when all else fails, read the instructions"
everytime i run this new unlocker it reboots in tricolor screen with spl-1.20 instead of 2.4
Used titanunlocker.bat and worked
My rom update failed, i tried 2 recover but it doesn't work.
1. i tried to reinstall the rom with ROMUpdateUtility,
but he says their is no previous version
2. i press update, again no current image
3. more then 0% i can't get
4. after 30 minutes still 0%, then suddenly
This keeps on going, a restore doesn't work
PLEASE HELP ME!!
please read the hardspl carefully ... then try again!
Are you using Vista? If so Vista cannot communicate with the device in Bootloader mode meaning you cannot update your phone. Get XP you will have alot less problems and it will work. Vista is just not worth hassel as its only really a fancy XP with some extras chucked in.
Kurt
NetrunnerAT said:
please read the hardspl carefully ... then try again!
Click to expand...
Click to collapse
where can i find the notes about hardspl?
rumble291 said:
Are you using Vista? If so Vista cannot communicate with the device in Bootloader mode meaning you cannot update your phone. Get XP you will have alot less problems and it will work. Vista is just not worth hassel as its only really a fancy XP with some extras chucked in.
Kurt
Click to expand...
Click to collapse
not true, I have used 3 different vista machines to flash roms on many occasions and have never encountered any problems, i also have read messages from several other people that have never had a problem
NetrunnerAT refers to this post http://forum.xda-developers.com/showpost.php?p=1777082&postcount=1
oké this one was fixed until an hour ago now i can't boot
HTML:
http://forum.xda-developers.com/showthread.php?p=2092039#post2092039
kerrance76 said:
not true, I have used 3 different vista machines to flash roms on many occasions and have never encountered any problems, i also have read messages from several other people that have never had a problem
Click to expand...
Click to collapse
Yes but you need to follow a tutorial to get it to work on Vista. Basically its easier on XP and you will have the least problems. You using Hard-SPL?
I have a HTC HD2 with Tmobile, it is a Leo. I would like the WP7 on my phone but not sure how to get it going. I have downloaded the DFT_LEO70_release.rar, unzipped went through the motions of putting the phone in bootloader mode and running the MAGLDR 1.12 utility. After a period the program stops with an error reading. Anyone got the step by step order to complete the switch? I noticed the phone doesn't connect to activesync but still not sure my error.
Make sure you have HSPL3 on it. Run that first just in case, choose 2.08HSPL. Then after that run MAGLDR again. then once MAGLDR is in there, choose usb flasher then run the LEO70 utility
I believe you're in the wrong thread. You should be looking in Windows Phone 7 section of HD2.
You are awesome!! I got it running!! Thanks for your help! Now, how do I fix the other little things such as Marketplace and such? Any ideas?
The best hint was given already in post #3... check the HD2-WP7-thread here...
I'm still a newby, so excuse, if I am wrong to ask right here, but as an owner of an HTC HD2 512 (SPL 2.08 with magldr), formerly installed Miui roms, I now want to install WP7. The respective rom and installation routine is mentioned and offered in many places, but when I want to download the LEO70_RELEASE.rar the page is always dead. Please help me or further my issue to the right place, or advise me how to do it myself, that would be very nice. Thanks in advance,
Availability LEO70_RELEASE.rar
May I pose you a question, whether or not I am in the right thread or you are right to be contacted, but I have the same intention as mentioned before, getting WP7 on my Leo. The trouble starts right away by not being able to find the respective downloadable rar at all. All searches end in dead pages or links. What might that mean? And where might I get it?
Once again please excuse, when I'm wrong here, but I'm not experienced in using forum structures …
Thank you so much for answering or helping me, anyone who reads or is forwarded this, if it's others, too …
Hubertus