Related
Just one question : Is it possible to make my phone SuperCID with MTTY ??
My phone don't load WM6 it stuck on splash screen....
I can enter in bootloder (SPL 2.03) and all flash doesn't work....
Sorry for my english i'm newbie in english
thanks a lot for your answer
no it isn't.
Please check it out for the latest news at here.
http://forum.xda-developers.com/showthread.php?t=362338
I make the upgrade from WM5 to WM6 by the following post.
ATOM EXEC WM6 AKU0.7a.0 WWE 20071117A1WWE with STK
ATOM EXEC WM6 0.7b.0 WWE 20071216A3WWE
But I reaily can not accept the Bluetooth headset can not use for phone.
I want to downgrade to my default OS, WM5.
I had downloaded the Offical WM5 roms in my computer.
But I tried to downgrade by DSUU directly after the Atom Exec sync with PC.
The error message prompted with "Error Country ID or Device id Error"
I also tried in other mode, (Camara + Reset)
It can detect the CE IMAGE ROM, but unable to detect the Device Rom version.
So the DSUU will show the error "Error: Connection Error."
How can I downgrade the device the Atom Exec to WM5 ?
have you tried MN1 EBOOT?
http://forum.xda-developers.com/showthread.php?p=1684559&highlight=EBOOT.NB0#post1684559
My friend admin88hk be very careful while playing with the bootloader using sdcard or u will have a bricked device like mine . Read the complete forums on upgrade of atom exec then proceed with caution and cross ur fingers during the procedure.
hmmm.... try this first before you flash with SD Card
http://forum.xda-developers.com/showthread.php?t=335271
cheers,
TJ
Is it follow by this step, the device can be fully backwaard to WM5, if all of the step are success.
After that, the O2 connect and O2 Software can be used or not ?
I am looking for a success case.
Is there anyone has been done the steps which are posted about MN1 EBOOT??
Can reply me or give me confidence?? Thanks.
am looking for a success case.
Is there anyone has been done the steps which are posted about MN1 EBOOT??
Click to expand...
Click to collapse
Well it certainly has'nt been thought up on a whim, if thats what you're thinking.
Search and find your confidence mate, heck the link has been given to you!
This topic has been discussed in detail in all main Atom threads, try the link given by tjlabias(<-- btw hope you're well mate! ) after if no success then EBOOT method
I have follow the instructurtion for go back to WM5.
But I get a problem in the step 3.
I have download the EBOOT.nb0 and copy to MiniSD card.
After I insert into Atom EXEC, Press camera+reset.
The Screen will post the transfer in completed after 3 - 5 seconds the screen was load.
But the Atom EXEC was not action come out after the following 3 minutes.
So I press camera+reset again.
The screen still at MN2......
How can I change the bootloader to MN1........
any other solution to do it ?
I am reaily can not stand for the phone can not use the Bluetooth headset.
I also has found a some threads also related, but all of them is not work.
http://forum.xda-developers.com/showthread.php?t=331818
This case was very seems with me.
* I am uploading the image to webhost, I will update the post ASAP.
edit: I searched further and found that it could be done. Sorry for the unnecessary post!
-----
on a side note, is it possible to use the ROMs shown here for WM6 on my o2 which currently has WM5? Or do I first have to get an official upgrade to WM6 and then install the new ROMs here?
PLEASE HELP I HAVE BRICKED TYTN CAN NOT CHANGE BOOTLOADER CID LOCKED??HELP PLEASE WILL PAID WITH PAYPAL IF ANY MAN CAN HELP ME....
I wanna know whether any one is working to find a sulotion to unbrick the bricked devices HTC TYTN with "SPL 2.03, IPL 1.04, NO GSM, KITL Disabled"!!!!!???????Can not boot only bootloader WHEN PUT IN MTTY, Cid locked LEVEL=FFF
I try this :http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=59&Itemid=27
- NOT WORK always 100% then message : image corrupted !!!!!!! And not change bootloader....
Sd card not work format sd card fat32 and try all TYTN ROM!!!
hen i tried to rom upgrade using any ruu (ruuwraper,.....) it only shows 1% and my device reboots and ....
it looks like LOSE super CID and my boootloader change and now ipl 1.04 and spl 2.03 NOW WHEN GO IN BOOTLOADER AND MTTY command:
Cmd>task 32
CID: Wait interpreter timeout
Level = FF
Cmd>info 2
HTCSF kEØ(HTCE
Cmd>
Cmd>info 7
HTC Integrated Re-Flash Utility, Common Base Version : 1.51d
Device Name: HERM100, Bootloader Version : 2.03
Built at: Jun 16 2007 01:57:22
Copyright (c) 1998-2006 High Tech Computer Corporation
CPU ID=0x41129200
Main CPLD version=0x5
Upper CPLD version=0x4
Main Board version=0x5
----------------------------my bootloader is changed...HELP PLEASE
any suggestions????
any solution to fix this and bootloader AND ALL PLEASE.....
I have tested everything on my bricked hermes but didn't work! READ ALL IN XDA DEVELOPER BAT NOT FIND SOLUTION-SD CARD NOT WORK????
IS ANY SOLUTION I AFTER I READ ALL IS ANY CHENCE HELP ME I WILL PAID WITH PAYPAL IF YOU CAN GIVE ME SOLUTION FOR MY HTC TYTN PLEASE
THANKS FOR ALL AND I HOPE THAT POF WILL RESPOND ME ITS VERY IMORTANT TO ME.
SORY FOR MY BAD ENGLISH....
If you get no replies here, try post it on the link in my signature. I've posted things there for work and found some decent bids.
Olipro Hard Spl 7 NOT WORK ...
Olipro Hard Spl 7 OR ANY HARD SPL NOT WORK WHEN TRY TO UPDATE MY TYTN I SEE 100% IN MY PHONE THEN MESSAGE IMAGE CORRUPTED. IS ANY CAN HELP ME.???????????
Pof did not show up here in last two months. Wondering what has happened to him.
Exactly same issue here.
it seems that there is no sulotion for it for now
I took my device to a service center (not imate servicecenter, because there is no imate certified service center here in my country) and they told me that they should replace my imate's motherboard with a new one and that will cost me about 420$. f***cking service center. i have a bricked and useless jasjam now!
Guys I took a look at the Hermes Unbricking page and I think that you fall to the category not even Pof can repair. Your bootloader is not directly mentioned but the circumstances of your case are the same as in:
1.06, 1.09, 1.11 or 2.02, Any HTC Boot, Will not boot to windows, NO GSM, NO KITL - Bricked while flashing radio, bootloader doesn’t allow to flash unsigned code. BRICK - Send it to repair centre, warranty... Basically you are in the very same situation - only your bootloader version is different - but it is an official bootloader that does not allow unsigned code flashing.
try unpacking the official upgrade from your service provider with ruuwrapper. I had this problem and it worked for me.
ruuwrapper not work!!!
i try to rom upgrade using ruuwrapper
(try offical htc rom and many other more then 20 htc roms) it only shows 1% and my device reboots and ....
it looks like LOSE CID and my boootloader change and now ipl 1.04 and spl 2.03 NOW WHEN GO IN BOOTLOADER AND MTTY command:
Cmd>task 32
CID: Wait interpreter timeout
Level = FF
------------------bat before lose cid i have super cid!!!
mbsshop1302gsm said:
i try to rom upgrade using ruuwrapper
(try offical htc rom and many other more then 20 htc roms) it only shows 1% and my device reboots and ....
it looks like LOSE CID and my boootloader change and now ipl 1.04 and spl 2.03 NOW WHEN GO IN BOOTLOADER AND MTTY command:
Cmd>task 32
CID: Wait interpreter timeout
Level = FF
------------------bat before lose cid i have super cid!!!
Click to expand...
Click to collapse
Dude!, I have exactly in the same situation as you.
I think the only way we can fix our devices is to find the bootloader password and then flash the radio with MTTY. The most important problem here is that we cannot flash our devices using ROMUpgradeUt.exe because it cannot connect to our devices, so we cannot find the bootloader password using the pof & esteve method "HTC Hermes BootLoader PASSWORD".
We can only flash our devies using the ROMUpdateUtility.exe.
I tried to do the above method on ROMUpdateUtility.exe and RUUResource.dll instead but there is no password field in RUUResource.dll . Maybe someone like pof should work with this dll to see how does it works!
Solution That Sspl-herm.EXE Can Start With Windows Command?? AS I SAY IN LAST POST
koorosh_bsboys said:
Dude!, I have exactly in the same situation as you.
I think the only way we can fix our devices is to find the bootloader password and then flash the radio with MTTY. The most important problem here is that we cannot flash our devices using ROMUpgradeUt.exe because it cannot connect to our devices, so we cannot find the bootloader password using the pof & esteve method "HTC Hermes BootLoader PASSWORD".
We can only flash our devies using the ROMUpdateUtility.exe.
I tried to do the above method on ROMUpdateUtility.exe and RUUResource.dll instead but there is no password field in RUUResource.dll . Maybe someone like pof should work with this dll to see how does it works!
Click to expand...
Click to collapse
YES MATE I THINK BAT WHERE IS POF!!! POF WHERE ARE YOU????
OR
Is Any Solution That Sspl-herm.EXE Can Start With Windows Command?? I MEAN I CAN ONLY PUT PUT MY BRICKED TYTN IN BOOTLOADER BAT CAN NOT START SSPL-HERM.EXE BECAUSE NOT WANT TO LOAD ....IS ANY CHANCE TU START Sspl-herm.EXE WITH WINDOWS COMMAND TO CHANGE BOOTLOADER TYTN IN SSPL HERM THEN WE CAN FLASH BRICKED DEVICE!!!??
SO I HOPE THAT SOMEBODY CAN CREATE PATCH FOR THIS THAT SSPL-HERM.EXE CAN START IN WINDOWS THEN CHENGE BOOTLOADER IN HERMES WHEN HERMES CONNECTED WITH USB AND ONLY CAN LOAD BOOTLOADER.....
I MEAN
THAT Sspl-herm.EXE CAN RUN IN WINDOWS AND CHENGE AUTOMATICALY BOOTLOADER IN PHONE WHEN PHONE ONLY CAN RUN BOOTLOADER AND CAN NOT RUN OS...I HOPE THAT YOU UNDERSTAND WHAT I MEAN SORY FOR MY BAD ENGLISH.
mbsshop1302gsm said:
YES MATE I THINK BAT WHERE IS POF!!! POF WHERE ARE YOU????
OR
Is Any Solution That Sspl-herm.EXE Can Start With Windows Command?? I MEAN I CAN ONLY PUT PUT MY BRICKED TYTN IN BOOTLOADER BAT CAN NOT START SSPL-HERM.EXE BECAUSE NOT WANT TO LOAD ....IS ANY CHANCE TU START Sspl-herm.EXE WITH WINDOWS COMMAND TO CHANGE BOOTLOADER TYTN IN SSPL HERM THEN WE CAN FLASH BRICKED DEVICE!!!??
SO I HOPE THAT SOMEBODY CAN CREATE PATCH FOR THIS THAT SSPL-HERM.EXE CAN START IN WINDOWS THEN CHENGE BOOTLOADER IN HERMES WHEN HERMES CONNECTED WITH USB AND ONLY CAN LOAD BOOTLOADER.....
I MEAN
THAT Sspl-herm.EXE CAN RUN IN WINDOWS AND CHENGE AUTOMATICALY BOOTLOADER IN PHONE WHEN PHONE ONLY CAN RUN BOOTLOADER AND CAN NOT RUN OS...I HOPE THAT YOU UNDERSTAND WHAT I MEAN SORY FOR MY BAD ENGLISH.
Click to expand...
Click to collapse
I know what you mean
But unfortunately sspl-herm.exe is a WinCE application and cannot run on x86 or x32 windows.
sspl-herm.exe is a WinCE ?
yes i know this bat i try to work to resolve many bricked device so is any change to create somebody pach that work in windows xp ???I mean when i click in this icon sspl-herm.exe that automaticaly change bootloader in bricked tytn when i have only bootloader ??/
Is there anyone who want to tell me how to do this? But step by step! It's SPV C550 with Qtek and WM6-413rom! No such an explanation on this forum about this!
first you must access to bootloader mode in your phone.
next run mtty and enter following commands
info 2
format BINFS
next must to restart your phone and again access to bootloader mode,but don't open mtty!! just run installation of some wm2003 for hurricane (like from qtek8200 or sda II) and its all
sorry for pure english
and where is a original 2003 ROM?
I have the one rom on russian(8200 qtek), but is there somethinn' on english?
I will be greatfull for someone put a link to it!? I NEED THAT ROM!
The russian qtek ROM can be set to the english, but i'm not 100% sure about that.
yes it's tru. russian rom support english language
Help! When i try to format in mtty i type "format ALL" and put SDA II rom(and it's same with qtek 8200)! And then this message lightis on "Data crash, connect your service"?! (i was pissed because it's didn't work in regular way to put WM6, so i typed this command)! I trying to put patched SPL to foramt again (with "format BINFS" command) but seems to be that is not posible! :S (sry for english) phone is working, boot is working too... Is there way to back in my phone or i break it!? i need answer very quickly so know to buy a new one!
Hi,
well when i tried to make the update to WM6, the install crached and the prophet now boot only on Bootloader with the ipl 2.2.... 001 et SPL 2G3.
I don't know why the SPL changed to G3 ???
I tried to put the official ROM Qtek no vender but it's blocked at 80% with the error 274 after this I tried the step 1 PVTEMP but only the updateROMG3.exe working until 100% but nothing work after. and I'm still on Bootloader
I don't know what to do So PLEAZ HELP ME
THANK all
zolivier said:
Hi,
well when i tried to make the update to WM6, the install crached and the prophet now boot only on Bootloader with the ipl 2.2.... 001 et SPL 2G3.
I don't know why the SPL changed to G3 ???
I tried to put the official ROM Qtek no vender but it's blocked at 80% with the error 274 after this I tried the step 1 PVTEMP but only the updateROMG3.exe working until 100% but nothing work after. and I'm still on Bootloader
I don't know what to do So PLEAZ HELP ME
THANK all
Click to expand...
Click to collapse
Your device is pretty much useless... You could try contacting Olipro (do a search of members), but he will charge for any service he does...
Other than that, I can think of no way of getting it back up and running. There may be some MTTY commands, but nothing obvious.
thank you
i tried to contact olipro but no answer yet
I search on the forum some information conserning MTTY but without the wiki there is no command interesting for my problem do you have a site about command MTTY or the procedur maybe to change the SLP G3 to a G4.
OR maybe there is an hardware methode to reset the SLP ???
zolivier said:
thank you
i tried to contact olipro but no answer yet
I search on the forum some information conserning MTTY but without the wiki there is no command interesting for my problem do you have a site about command MTTY or the procedur maybe to change the SLP G3 to a G4.
OR maybe there is an hardware methode to reset the SLP ???
Click to expand...
Click to collapse
In theory, there is JTAG that can write direct to the Hardware, but no one has ever managed to get that to work...
I don't know any MTTY commands nor do I know where to find them, but I think there is a way to write direct to the memory...
In theory there might be the JTAG option, but the DOC wich is used in the regular prophet doesn't allow the JTAG connection...so if you don't have a "beta" Prophet there won't be a possibility of using Jtag