Related
For All You Retards Who Can't/Won't Read The Wikki Heres How To Flash Just The OS File And The Ext Rom.
First Of All Your Device Must Be SuperCID To Do This Otherwise It Just Won't Work. I'm Assuming You All Know How To Do That So Theres No Need To Explain.
First Of All You Need To Get This File And Extract It On Your PC.
ftp://ftp.xda-developers.com/Hermes/Cooked_ROMs/SPL-1.01MFG_Pack.zip
Now You Then Need To Follow These Instructions. (WHEN USING MTTY YOU HAVE TO TYPE ALL OF THE COMMAND DO NOT COPY AND PASTE THEM AS IT DOESN'T WORK)
1.Put hermes in bootloader mode (side ok + power button + softreset)
2.Connect Hermes to computer using USB cable.
3.Open mtty.exe, select "USB" from the dialog box, then hit Ok.
4.Hit enter twice and you'll see the "USB>" prompt.
5.Then type these commands: (note the use of 'lnb*s*')
USB>task 32
Level = 0
USB> lnbs SPL-1.01.nbs 50020000
USB> task 8
6.Device will reboot after this, with bootloader 1.01-MFG on it.
Next Download The AKU 3.3 Update Of Your Choice From The FTP.
Open The .exe File With A Program Like WinRar And Extract The nbh File In There. There Will Only Be One With The Extension .nbh
Now Download The NBHextract Program And Extract The ROM Contents.
http://forum.xda-developers.com/showthread.php?t=289830
1. Open A Command Prompt In Windows
2. Change To The Directory With NBHextract In It.
3. Type This Command At The Command Prompt
C:\> NBHextract.exe <NBH File Name>.nbh
4. Make Sure That RUU_signed.nbh Is In The Same Folder As NBHextract. Also Change The <NBH File Name> To Whatever Your File Is Called.
Finally You Can Flash The Extracted OS.nb and ExtROM Files To Your Hermes Using These Instructions.
For The OS.nb File
1.Put hermes in bootloader mode (side ok + power button + softreset)
2.Connect Hermes to computer using USB cable.
3.Open mtty.exe, select "USB" from the dialog box, then hit Ok.
4.Hit enter twice and you'll see the "USB>" prompt.
5.Then type these commands: (note the use of 'lnb', without 's')
USB> task 32
USB> task 28
USB> lnb OS.nb
USB> task 28
USB> task 8
And For The ExtROM file
1.Put hermes in bootloader mode (side ok + power button + softreset)
2.Connect Hermes to computer using USB cable.
3.Open mtty.exe, select "USB" from the dialog box, then hit Ok.
4.Hit enter twice and you'll see the "USB>" prompt.
5.Then type these commands: (note the use of 'lnb', without 's')
USB> task 32
USB> lnb ExtROM.nb 57500000
USB> task 8
All Credit Goes To Pof For The Instructions I Have Mearley Collated Them Into One Place, For Those To Lazy To Go Looking For Them. Enjoy The New AKU.
Cheers
I did it this way to save time and had no issues.
It saves the multiple reboots since after this you need to install HTCtweak to get the extrom back so you can put the files you need it and then reboot etc etc...... so I saved myself a good 45 sec to a minute
USB> task 32
USB> lnb ExtROM.nb 57500000
USB> task 28
USB> lnb OS.nb
USB> task 28
USB> task 8
Stuck?
So this is my firs time flashing a rom via mtty, and i was just wondering, is there supposed to be some kinda progress bar/info of some kind after this line:
start NB image download
or ist it just gonna sit there for the usual ?hour?
edit: Never mind, a little filename glitch
pof wiki says it all
I did use that one, i just misstyped,
wrote lnb OS.nb istead of
lnb 06_OS.nb
y get through all this trouble.. just upgrade the whole thing.
i upgraded to latest rom aku 3.3 WITHOUT doing all this. i have bootloader 1.04
Then you might never be able to do individual Radio ROM upgrades ever again because most of the AKU3.3 updates come with Radio ROMs that have HTCBOOT 1008 which doesn't allow individual Radio ROM Upgrades.
..
When you say "most of the AKU 3.3 roms", are we sure this is the case for this one?
What is the way to see it?
Thanks!
Which RUU did you flash? If its the one that's the TEST or the Swedish one, you're outta luck for the Radio Bootloader...
If you flash the whole thing you should be able to go to the official Cingular Rom right? Guess you still need to CID first?
echoz said:
Then you might never be able to do individual Radio ROM upgrades ever again because most of the AKU3.3 updates come with Radio ROMs that have HTCBOOT 1008 which doesn't allow individual Radio ROM Upgrades.
Click to expand...
Click to collapse
If it is SuperCID already he can Flash an entire previous ROM to get the old HTCBOOT 1007. Still better to do it manually so you can get the Best AKU/ROM/Radio and BL combo since each BEST one comes from somewhere different.
BTW to OP this is great post and hopefully will stop some pointless threads.
Thanks... I got Stuck... But I was going to change back to 1.04 and was going to give up... But i noticed in the SPL-1.01MFG_Pack folder there were *.nb files for 1.01 and 1.04... So for one last hurrah I stuck the 06_OS.nb file in there and tried again... To my suprise it worked...
wpbear said:
If it is SuperCID already he can Flash an entire previous ROM to get the old HTCBOOT 1007.
Click to expand...
Click to collapse
Won't work!
Once you have the new radioboot, it's there to stay forever! So watch out with it!
So you can only go forward then right?
Umm.... Going on 30 minutes now...
I've been flashing my device for about 30 minutes now... and it's stuck at this point... There's no progress bar... no indication that it's doing anything.... Did I brick my phone?
Please help...
Mtty.exe
====================
USB>task 32
Level = 0
USB>task 28
Storage format start
Write Nand Success
dwBlockToWrite = 13
Storage start block: 461
Storage Total block: 475
Total Bad Block in CE: 0
NeedToEraseBlockStart: 474
Storage format success
USB>lnb OS.nb
:F=OS.nb
:A=501A0000
:O=00000000
:L=FFFFFFFF
start NB image download
==============================
The cursor just continues to blink at this point... and the bootloader continues to show MFG SPL-1.01... Is this normal...should I just continue to wait? should I try again... should I reflash a different rom?
Please help... Thank you in advance...
Mark
NEVERMIND!!
I'm sorry... I failed to recognize the name of the file was 06_OS.nb.. Renamed the file to OS.nb and it is showing the progress indicator now... My apologies...
Excellent FAQ's and Wiki... Thank you all.
Now I'm crossing my fingers for that GPS to come through...
Mark
Hey people, i understand the frustration of people asking the same thing over again but ive had a few people asking me about this aswell IRL,
Having got settled with the ROM/Ext ROM/Radio etc... that are on my Hermes would adding the AKU3.3 update be advisable right now??
Also if i/we go ahead with this update will it require a full wipe of the device again (ie same as when a new ROM is put on)??
P.S: What are the benefits?
My question is that I see that the only 3.3 options are Swedish and Russian, and I speak English. What's the word on this?
There is an English version: ftp://xda:[email protected]_WWE_2.05.255.1_6275_1.34.00.10_108_Test.exe
If you are willing to upgrade just the ROM itself, I think it's worth it. This new 2.05 ROM has AKU 3.3 and it's very fast compared to any other ones. I'm currently running Swedish 2.05 ROM and patched it to English. Soon, I'll be flashing it to English 2.05. Full ROM upgrade (by double clicking the .exe file) is not recommended.
I try to flash rom ENG to my NIKi
my version is 1.31.406
I read post "Nike SSPL, USPL and HardSPL" by jockyw2001
1. download the attached files
2. REMOVE SIM and SD CARDS !!
3. connect usb cable
4. copy sspl-1.16-nike.exe to your device and run it (usb cable must be connected!)
5. after a few seconds "USB" appears on the display
6. unplug and replug the usb cable
8. you can now flash the hardspl-1.15mfg-nike.nbh by running ROMUpdateUtility.exe from flash-uspl-niki
******* but it's still 0% and still boot loader screen*****
I Hard reset my NIKI but still bootloader and show
NIKI100
SPL-1.16.0000
CPLD-4
I try to flash this rom "RUU_Nike_HTC_WWE_1[1].13.405.01_Radio_Nike_1.58.11.07_signed_Test.exe"
It's 1% only and report error 262
"ERROR [262, 276, 284, 302] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process.
Solution: If this happens, you can just soft-reset the device and run RUU again. The update process will then continue."
How to repair this
in post "http://forum.xda-developers.com/showthread.php?t=387217" by NetrunnerAT
"1. Download MTTY and connect via USB (dont forget do disable Activ Sync!!) us command Boot, to force a OS Boot!
2. After OS is Started ... Download SSPL and Copy it to your Phone ... please remove SD Card and SIM ... Start this Program!
3. Now you are in the Bootloader but it tells something about SPL 1.16Jump ... now you can Flash Hard SPL!!! If you doesnt see 1.16Jump you CAN'T Flash HardSPL!!
4. Now you can Flash my Dumped TIM Rom!!! "
I try this It show log
"boot
Fill RSVD information for block 288 to 309
Storage start sector=0xAF00, total sector=0x103C0
Storage start block=721, total block=1039
Total Bad Block in CE: 0
Erase physical block from 1011 to 2032
si backup: Erase physical block from 2032 to 2048
Card inserted
SDHW_EnablePowerOn
SDHW_ConfigGPIO
Cmd5 CMD_TIMEOUT
Cmd8 CMD_TIMEOUT
SD Init OK
SDFATChkConf: RhOpenFile() failed NIKECONF.txt
OEMGetUpdateMode
OEMTranslateBaseAddress 23 80000000 80000000
IPLMSG:0x8:INFO: Loading image ...
IPLMSG:0x9:INFO: Jumping to image...
OEMLaunchImage 80000000
Jump to Physical Address 10300000"
and still boot loader
how to fix it's
Thank' for reply
Please tell us ... what you have done before ... step by step!!!!
If you stay in the Bootloader and MTTY "boot" doesnt work, try the oemsbl with the command "cego"
NEXT ... what NIKI you have? German? UK? TIM? Vodovone branded?
You tell us not enough, too help you!
NetrunnerAT said:
Please tell us ... what you have done before ... step by step!!!!
If you stay in the Bootloader and MTTY "boot" doesnt work, try the oemsbl with the command "cego"
NEXT ... what NIKI you have? German? UK? TIM? Vodovone branded?
You tell us not enough, too help you!
Click to expand...
Click to collapse
Sorry For My Eng = =' I'm Thai girl.
I can't Remember lang before flash becouse I don't Know ^ ^ GER or Italy or Rus Lang
It's Not Eng Lang not Vodafone Brand
I'm new bie for this model . I have Dopod 818 pro It's Easy to flash I think Niki Is same
command "cego" notwork
Can I reflash any Office Rom?
What is SPL-1.16.0000 mean It's Hard SPL,SSPL or USPL
I Try to Put camera button and power button
and Use Mtty
boot
InitDisplay: Display_Chip=1
Card inserted
SDHW_EnablePowerOn
SDHW_ConfigGPIO
Cmd5 CMD_TIMEOUT
Cmd8 CMD_TIMEOUT
SD Init OK
SDFATChkConf: RhOpenFile() failed NIKECONF.txt
OSSIReadBack ++
Read SI data from flash success
tail signature match
Checksum match
UserStorageSIPreload ++
My NIKI Can boot and Use Now
I don't Know what Lang
" A Propos de
Windows Mobile 6 Profesional
Processeur : MSM7200-400Mhz
Memorie :101.67 Mo
Conecteur d'ext. :En cours d'utilisation
Informations de L'appareil
Version de Rom :1.31.406.09
Date de Rom :10/30/07
Version de Radio 1.58.16.27
Version de prot.. 25.61.30.03w
Is lang France?
@^ ^@
Hoorayyyyyyy
My phone is back
many thank's for NetrunnerAT
1. Download MTTY and connect via USB (dont forget do disable Activ Sync!!) us command Boot, to force a OS Boot!
2. After OS is Started ... Download SSPL and Copy it to your Phone ... please remove SD Card and SIM ... Start this Program!
3. Now you are in the Bootloader but it tells something about SPL 1.16Jump ... now you can Flash Hard SPL!!! If you doesnt see 1.16Jump you CAN'T Flash HardSPL!!
4. Now you can Flash my Dumped TIM Rom!!! "
and Now I Use rom TOM_Niki-Project_WM6[1].1_WWE_16keys_signed_Ship.exe
Many many Thank For XDA - Developers
http://www.pdamobiz.com/ <- its a Thai PDA Board!
The most errors on HTC Niki are simulare with HTC Polaris and HTC Kaiser!!!
I hope this helps!
my touch dual is lock at 3 color mode
Sorry for my english....
My niki is locked afther flash for unlock it (supercid)
I've tried to install a sspl and hardspl, but all have crashed at 95%
I've tried to install hardspl renaming the file nbh in NIKEIMG.nbh from sd, but this procedure have only send me message: loading......... and nothing all.....
At this moment my niki is stopped at 3 colors mode
Have you any idea for help me?
Many thanks to all
don't have any idea for help me?
i can use my niki for stop my door?
thanks
Works very well
This really helps me out!!!! Thanks to NetrunnerAT.
but the site is in thai language
Hi,
I have a big problem.
Sorry, but i already search in this forum but no success.
I upgraded a ATH100 with a SPL 3.65 ATH400 Rom
Now, i try to back to ATH100 but i cant. With PC and RomUtility, i get MODEL ID 244 error.
With SDCard i get 00058002 error while Loading...
Anybody can help me.?
Thanks
athena400back to 100
i was in too, now if you cant downgrade yet,sent me an Email ,to [email protected] and sending to me alot of pic from thet and information about your rom.
hi guys,
I had the same issue too....can not flash from SD card with 00058002 loading ...
any solution yet ??
hi guys,
I had the same issue too....can not flash from SD card with 00058002 loading ...
any solution yet ??
I have same problem. Please anybody can help me?
Try out This>>>>>
ERROR [244] : INVALID MODEL ID
from cmonex @xda-dev
This is good for both corrupt modelid and corrupt wifi, and fixes both at the same time.
STEP BY STEP:
1. download attachment at the end of the post for mac1.exe (requires .net 2.0 installed on the PC)
2. you will also need to download the other attachment in this post for the mtty program.
3. enter bootloader (tricolour screen) manually by pressing and holding camera button all the way in (yes I mean that, press it in as hard as you can!!), while doing a reset, then keep the camera button held until you see the tricolour screen.
4. disable USB in activesync (wmdc if you have vista - in this case, do not kill wmdc, just disable usb in it!!!)
5. run mtty and select USB option from the dropdown box!
6. then press enter in main window that comes up, see if that gives you Cmd>
7. now you should have Cmd>, if not, re-check if you did the above steps right until you get Cmd>
8. now run the mac1.exe, type in your MAC address you want to use for the Athena, if you have SPL 3.xx reported on the tricolour screen, then use the button for SPL 3.xx, otherwise if you have SPL 1.xx reported, use button for 1.xx.
9. this should have generated a .bin file for you, copy that bin file in the folder of mtty.
10. now, in mtty, type (do not copypaste!) this command: task 32
11. this should return Level = 0
12. now, you must only do one of the two following commands:
- if you have SPL 3.xx, then type (do not copypaste!!) this command: lnb filename.bin 76508000
(there filename is the name of the .bin file you generated - don't forget to put .bin after filename, as the full name is needed).
- OR, if you have SPL 1.xx, then the command is different (do not copypaste!!): lnbs filename.bin 75108000
(there filename is the name of the .bin file you generated - don't forget to put .bin after filename, as the full name is needed).
NOTE, the command starts with a lowercase "L", not "I"!
WARNING: PLEASE DO NOT MIX UP THESE TWO DIFFERENT COMMANDS!!!
if this info helps: most people will have SPL 3.xx, and if you have AP4 (not vanilla) already running then you're definitely 3.xx
13. mtty will popup a window asking "OK", you press OK!
if you get "Fail to synchronize with the host (1)", then make sure you did follow step by step. if still same error, try placing mtty and the bin file under C:\.
14. now the file downloads, if mtty reports it flashed the file, and at the end "code entrypoint unknown", then that's it, now boot back to WM and see if wifi works.
Download: Mac1.zip mtty_0513_Test.zip
But where atachment ?
For me....WORK...THANKS again CMONEX
but i not do to repair wifi i want to flash my wm........
help me please ,,,
i make hard spl for athe400 in athe100
"ERROR [244] : INVALID MODEL ID
from cmonex @xda-dev
This is good for both corrupt modelid and corrupt wifi, and fixes both at the same time"
as it says it fixes corrupt modelid
It is worth a try
ERROR[244] :Invalid model ID ATHE100
Hi,where do i find the MAC adress for my ATHE100 as i cannot get forward from the bootloader?I am using SPL-v1.20.Olipro.Thanks to any1.
Yes, where is the MAC ADDR
As above, would be grateful if anyone would help us find where the MAC address and thanks for this thread this is the bane of most new owners and newbies. Cheers!!
Mac addr found, but......
Yes found the MAC address - it's under the battery cover, but having gone thru the whole process I got the following 3 errors at the end-
ERROR: no header matched
Transfer CERT error
Flash Programming Error
Thanx buddies!
3 ERROR Messages!!!
Hi Lakeman, could you help decipher these mysterious errors which I had after I have gone through the process twice
ERROR: no header matched
Transfer CERT error
Flash Programming Error
Thank you!
invalid Command
command error
whats wrong???
Cmd>lnb ameo.bin 76508000
lnb ameo.bin 76508000
Command error !!!
here you go >> http://xacsx.de
german ameo-site, roms, repair, and other helpful things
command error
whats wrong???
Cmd>lnb ameo.bin 76508000
lnb ameo.bin 76508000
Command error !!!
if you get notice
-> ERROR [242] : INVALID LANGUAGE
-> ERROR [244] : INVALID MODEL ID
-> ERROR [294] : INVALID VENDER ID
-> ERROR [296] : UPGRADE ONLY
One of these error messages will appear when you use the wrong RUU to do the upgrade. RUU will check if the Model ID and Language ID are compatible with the device. Make sure you use the appropriate RUU tool to upgrade.
stuck in bootloader. Help needed.
I have a HTC Athena x7500.
accidentally upgraded my htc x7500 WITH SSPL-Manual-x7510.zip of HTC X7510
Wend I turn on the device, it goes directly to bootloader and
the screen is:
ATHE 100
IPL - v1.00
ATHE 100
SPL-v3.05.0000 OR my old spl is 1.10.0000
I have tried to change the language of my athena and then he died :spanish > fransh
USB (wend is to connect)
series (wend is unconnectable).
I can not turn the unit off by pressing the button, but must take
the battery.
I have tried with hardspl its not working
I want a solution in the forum xda-develop it says my q must upgrade to the rom of espana oficial
After downloading the rom:Advantage_HTC_SPA_2.21.412.1_1.50.00.00_Ship
I tried to upgrade to this rom May j has a mesage on my athena screen:
found spl v1.10
dowload Spl before v3.05 is not allowed!
I tried to update it with the sd card i have the same mesage
upgrade with athenaUnlucker not work
upgrade with hardspl v7 not work
upgrade with CheetahUnlocker not work
upgrade with athena wraper not work
I have explored ruu_signeg.nbh in spanish rom with notepad jai entered the signer spl 1.10 I know if is sure or not
I believe there is a problem in the image rom saved in my athena rom
what I see on the screen of my athena is the spl 3.05.0000
The real spl is 1.10.0000 there is confusion in my spl
with mtty : task 32 level=ff
is what I can fix this problem with mtty
so if possible please guide me
I board on my pda (cid locked)on the Spanish language HTC_304
sorry for my bad Englis
thank you in advance
My email: [email protected]
http://forum.xda-developers.com/showpost.php?p=5205291&postcount=8
I think there is another thread somewhere about this but you could try the incorrect ID fix in the post above
and try to do the lower SPL
Just tryed to update my Nike Rom. Now my Nike is stuck in Bootloader Mode.
It displays:
NIKI100
SPL-1.22 hard
CPLD-4
Flash stops at 73%. Please help me!!!
Need more info...
What error does it give? (If any)
Try using mtty to boot the device.
Wezternator said:
Need more info...
What error does it give? (If any)
Try using mtty to boot the device.
Click to expand...
Click to collapse
All the time error 262. tried several rom's - error 262 (stops at 89%, 98%). tired official rom - same.(stop at 73%). Tired flash with sd card-same
In bootloader it displays:
NIKI100
SPL-1.22.Hard
CPLD-4
Upgrade ROM code error. Please try again.
Please help!
Try this: Clicky!
Ignore the lower bits of that post, just grab a copy for MTTY and type 'boot' see if there is enough info on he ROM to boot he device, then try again
The problem is that I have cooked own rom, rom bad(promblem with xip), I did boot
Cmd>boot
InitDisplay: Display_Chip=1
Fill RSVD information for block 288 to 309
Storage start sector=0x8400, total sector=0x127C0
Storage start block=549, total block=1183
Total Bad Block in CE: 0
Erase physical block from 839 to 2004
si backup: Erase physical block from 2032 to 2048
No card inserted
OSSIPreLoad ++
But now stuck in first splash screen.
How to backup from hardspl to original SPL on the dead phone??
use mtty:
Fill RSVD information for block 288 to 309
Storage start sector=0x9E00, total sector=0x114C0
Storage start block=653, total block=1107
Total Bad Block in CE: 0
Erase physical block from 943 to 2032
si backup: Erase physical block from 2032 to 2048
No card inserted
OEMIPLInit clear 10MB ext RAM
OEMGetUpdateMode
IPLMSG:0x4:ERROR: Failed to retrieve stored image information.
Any idea? PLZ!
dmx_nigga said:
Any idea? PLZ!
Click to expand...
Click to collapse
Double posting puts people off wanting to help dude. Don't bump.
Tired other rom. yes!! 100%, but stuck in first bootscreen.
brothers, how to back up original spl from bootloader?
Many times I happened to cook ROM that do not work (especially with the 6.5 in Italian) but is not a problem!
probably yuor Hrdspl is not ok, try to flash it again and then flash the official rom
Link to Hard SPL 1.22
Link to Official WM 6.1 WWE with ROM 1.65.29.25
how can i flash hard spl 1.22 from bootloader?
• power off yuor niki (Remove for a couple of seconds the battery)
• press and hold power and camera buttons,you must have (tree color) bootloader
• connect usb cable
• run ROMUpdateUtility.exe (or Nike CustomRUU.exe) in a folther with hardspl-1.22-nike.nbh
salvy.c.83,I can't flash hardspl, it's stop at 0%..help please..
salvy.c.83 said:
• power off yuor niki (Remove for a couple of seconds the battery)
• press and hold power and camera buttons,you must have (tree color) bootloader
• connect usb cable
• run ROMUpdateUtility.exe (or Nike CustomRUU.exe) in a folther with hardspl-1.22-nike.nbh
Click to expand...
Click to collapse
Don't you need an SPL Jump running to upgrade the SPL? But, if you can't get into an OS you can't run the jump exe.
You need to find a really old ROM hat only requires the HardSPL you have then flash that. Or try an official one? Or have you already tried that
after unlock my athena is dead, go only in bootloader mode with this write:
ATHE100
IPL-1.00
ATHE100
SPL-v1.10.RP00
ALL ROM NOT RUN, CAN NOT CHANGE SPL,
I HAVE TRIED AND ORIGINAL ROM version hangs 1% WITH THE WRITTEN "INVALID ID .."
PLEASE HELP ME
GORGOMED
Don't worry, it happens all the time. Just follow the procedure of "How to fix the invalid model ID after bad flashing" step by step as described in the following page:
http://forum.xda-developers.com/showthread.php?t=405814
Good luck!
hi,i make this procedure ,but replay of the athena is this:
Cmd>task 32
Wait interpreter timeout
Level = FF
have read in some post ,when reply is FF is because SPL is original ,in fact my SPL is 1.10.RP00 not 1.12 olinex or olipro ,i needed how do I change only SPL and make open to Athena for upgrade rom.
tnx
RE HELP
I'm trying to put the original ROM, 1% BUT STOPS AND WRITE ERROR VENDOR ID "mtty DO THE PROCEDURE, BUT I DO NOT TO" LEVEL 0 "MA" LEVEL FF "AND I CAN NOT PUT THE MAC LIKE GOING FORWARD?
TNX
please help me
who is help me!!
tnx
nessuno parla italiano e mi fa capire che devo fare
giusto ,chi sa che devo fare?
Maybe this?
gorgomed said:
after unlock my athena is dead, go only in bootloader mode with this write:
ATHE100
IPL-1.00
ATHE100
SPL-v1.10.RP00
ALL ROM NOT RUN, CAN NOT CHANGE SPL,
I HAVE TRIED AND ORIGINAL ROM version hangs 1% WITH THE WRITTEN "INVALID ID .."
PLEASE HELP ME
GORGOMED
Click to expand...
Click to collapse
Try this...I do not know if you need to reset your MAC address...
http://forum.xda-developers.com/showthread.php?t=387454&highlight=mtty&page=4
I had this once and I needed a new MAC address....you can get it from any unused wireless device.
i make this procedure 100 times,but also write up :
STEP BY STEP:
1. download attachment at the end of the post for mac1.exe (requires .net 2.0 installed on the PC)
2. you will also need to download the other attachment in this post for the mtty program.
3. enter bootloader (tricolour screen) manually by pressing and holding camera button all the way in (yes I mean that, press it in as hard as you can!!), while doing a reset, then keep the camera button held until you see the tricolour screen.
4. disable USB in activesync (wmdc if you have vista - in this case, do not kill wmdc, just disable usb in it!!!)
5. run mtty and select USB option from the dropdown box!
6. then press enter in main window that comes up, see if that gives you Cmd>
7. now you should have Cmd>, if not, re-check if you did the above steps right until you get Cmd>
8. now run the mac1.exe, type in your MAC address you want to use for the Athena, if you have SPL 3.xx reported on the tricolour screen, then use the button for SPL 3.xx, otherwise if you have SPL 1.xx reported, use button for 1.xx.
9. this should have generated a .bin file for you, copy that bin file in the folder of mtty.
10. now, in mtty, type (do not copypaste!) this command: task 32
11. this should return Level = 0 - MY RETURN NOT LEVEL 00 BUT LEVEL FF
BECAUSE I DO NOT SPL 1.20 OR 3.XX NOT PACHED,THIS MY PROBLEM
I DO NOT CHANGE SPL ,SAY YOU MAKE A SOLUTION?
12. now, you must only do one of the two following commands:
- if you have SPL 3.xx, then type (do not copypaste!!) this command: lnb filename.bin 76508000
(there filename is the name of the .bin file you generated - don't forget to put .bin after filename, as the full name is needed).
- OR, if you have SPL 1.xx, then the command is different (do not copypaste!!): lnbs filename.bin 75108000
(there filename is the name of the .bin file you generated - don't forget to put .bin after filename, as the full name is needed).
When you try to unlock did you use HARDSPL from cmonex? Is the SPL SPL-v1.10.RP00 the ORIGINAL spl of the phone?
** If you DID NOT use HARDSPL YOU WILL GET Level=FF.
** HARDSPL is available here: http://forum.xda-developers.com/showthread.php?t=316846
Just retry HARDSPL. When you gst to boot loader you should see olipro SPL.
If I understand correctly, you made a mistake by not changing SPL in first case. It is not clear what you did to 'unlock" the phone...like you said in the first post what did you do for unlocking? How did you unlock?
The best unlock is HARDSPL>>>
yes,i make procedure but in the end athena is blocked,with up writing,now not run ,only reset and bootloader,do not have SPL 1.20 olipro ,not have MAC ,if i writing new ROM also original ,reply "invalid vendor".
Now i make AthenaWrapper but end write this"
ERROR 300 INVALID UPDATE TOOL.
tnx
What ROM are you trying to flash? I think since it still has the ORIGINAL SPL it will take only the original HTC ROM? Did you try that?
Try this other unlocker also ....it is here: http://forum.xda-developers.com/showthread.php?t=315831
Also, I need some way to text you better than this .....otherwise I can only give one suggestion per day !!!!
x7500
please i have the same problem.
but when a type this Inbs filename.bin 75108000 what must i do after that?
my athena caracteristic are:
ATHE100
IPL-v2.02
ATHE100
SPL-v1.20.Olipro
thank you
try flashing an spl 1.2 rom
readthe guide
http://forum.xda-developers.com/showthread.php?t=429013