I'm trying to flash my RADIO to 3.42.50 using the ROM Update Utility that came with the latest kitchen.
It starts to upload (8%), then gives me the follow error:
ERROR[328]: INVALID COMMAND
This update utility cannot be used for your PDA Phone. Please check your update utility.
Any ideas what might be causing this?
ROM: DCD 2.1.0
Radio: 3.27.00
See the Radio thread. It details this etc.
ookami007 said:
I'm trying to flash my RADIO to 3.42.50 using the ROM Update Utility that came with the latest kitchen.
It starts to upload (8%), then gives me the follow error:
ERROR[328]: INVALID COMMAND
This update utility cannot be used for your PDA Phone. Please check your update utility.
Any ideas what might be causing this?
ROM: DCD 2.1.0
Radio: 3.27.00
Click to expand...
Click to collapse
What Bootloader are you using?
I was using 2.40, like the DCD FAQ says but I see the radio requires 1.20... which I'm having trouble finding.
Anyone with a link to TitanUnlocker to install 1.20?
ookami007 said:
I was using 2.40, like the DCD FAQ says but I see the radio requires 1.20... which I'm having trouble finding.
Anyone with a link to TitanUnlocker to install 1.20?
Click to expand...
Click to collapse
Here you go...
TitanUnlocker
Tried that... it puts 1.10 on and kills communication to my phone. Now I'm stuck at a 2.40 bootloader screen and unable to flash it.
Thank God for titan_exitbl.exe!!!
So... I need a copy of TitanUnlocker that will upgrade me to 1.20
So... I need a copy of TitanUnlocker that will upgrade me to 1.20
Click to expand...
Click to collapse
You're not following the instructions correctly. Do EVERYTHING it says and it will install right.
gc.. why you usin radio 3.37.71?
kflipproductions said:
gc.. why you usin radio 3.37.71?
Click to expand...
Click to collapse
I always wondered that... LOL
I tried it again... same thing. Basically, as soon as the SPL-1.10 screen comes up, ActiveSync grays out, so I can't establish an activesync connection.
ookami007 said:
I tried it again... same thing. Basically, as soon as the SPL-1.10 screen comes up, ActiveSync grays out, so I can't establish an activesync connection.
Click to expand...
Click to collapse
That's correct. after you get the initial connection... it will not get an accurate ActiveSync connection. Don't worry. if you follow the instructions to a T... you'll be able to flash properly.
Ok... being as I LOVE beating my head against the wall... I tried it... for the third time... this time... it worked!
So... I am happily using my phone with the Radio 3.42.50 and the latest DCD ROM!
Thanks to all who helped!
Related
I have done the upgrade and everything went fine. After the upgrade it ran to extended rom configs and they went fine. My phone is no longer showing that it is connecting to 3G. All I have is the E logo on top. I am in my office and it is a 3g area, I was connecting 3G before the upgrade.
I have reinstalled the PTT .cab, and Hard Reset after it etc... Still the same.
I was going to upgrade my radio from 1.33 to 1.34 this morning, but when I ran that installer it told me that it was the wrong country??? Should I keep my radio 1.33? anyone know whats going on with this?
Thanks.
Gromet said:
I have done the upgrade and everything went fine. After the upgrade it ran to extended rom configs and they went fine. My phone is no longer showing that it is connecting to 3G. All I have is the E logo on top. I am in my office and it is a 3g area, I was connecting 3G before the upgrade.
I have reinstalled the PTT .cab, and Hard Reset after it etc... Still the same.
I was going to upgrade my radio from 1.33 to 1.34 this morning, but when I ran that installer it told me that it was the wrong country??? Should I keep my radio 1.33? anyone know whats going on with this?
Thanks.
Click to expand...
Click to collapse
Maybe try putting SPL 1.09 on it then running the RUU Shipped Radio ROM 1.27 from Germany.
OK< I tried what you said. My phone is SPL 1.09. So I ran the 1.27 RUU. I got the same kind of error.
ERROR 120: COUNTRY ID ERROR
The ROM image that you are trying to use is not designed to work with your device. Please check the vendor website and download the correct ROM update.
??????????????????????????????????????????????????????????????????????
Before loading another radio on it. just make sure it's the icon that is just not showing the correct connection, as some radios do... Check mspeed from your phone's browser for your actual connection speed... http://www.dslreports.com/mspeed
Gromet said:
OK< I tried what you said. My phone is SPL 1.09. So I ran the 1.27 RUU. I got the same kind of error.
ERROR 120: COUNTRY ID ERROR
The ROM image that you are trying to use is not designed to work with your device. Please check the vendor website and download the correct ROM update.
??????????????????????????????????????????????????????????????????????
Click to expand...
Click to collapse
Sounds like you are not SUPERCID. Run Pof v3 Unlocker, verify supercid, then try again.
Bimboy said:
Before loading another radio on it. just make sure it's the icon that is just not showing the correct connection, as some radios do... Check mspeed from your phone's browser for your actual connection speed... http://www.dslreports.com/mspeed
Click to expand...
Click to collapse
Good point. MT_PC_Hermes_PTT_REG_070129.CAB fixes the icon settings in the new Cing ROM.
Just ran a speed test... 207kbit/sec...
You might also just go to the \extended_rom via totalcommander or other filemanager and execute autorun.exe or at least the cab that corrects the 3g/u/e icons MT_PC_Hermes_PTT_REG_070129.CAB
A lot of people have found that for some reason after upgrading via mfg package to the 2.06 cingular rom, that the entire entended_rom did not run; even if they did not stop it after the upgrade. It looked like it loaded to most people, but they did not have the useless icons like telenav, mobiTV, etc..
OK, so something strange happened... I went to run POF's unlocker again. I ran it, but all of a sudden a ROM image begins to load? It looked like it was reloading the cingular image I loaded yesterday. Just than I get called into a meeting, when I get back, my phone is sitting there, looking the same as I left it before doing anything EXCEPT I have a G Icon now. Great, so I just checked the settings...
ROM Version 2.06.502.3
RADIO Version 1.16.00.00 ?????????????????????
Should I keep this radio or uupgrade it to a newer one, and if you think a newoer one than which should I try?
Gromet
Gromet said:
OK, so something strange happened... I went to run POF's unlocker again. I ran it, but all of a sudden a ROM image begins to load? It looked like it was reloading the cingular image I loaded yesterday. Just than I get called into a meeting, when I get back, my phone is sitting there, looking the same as I left it before doing anything EXCEPT I have a G Icon now. Great, so I just checked the settings...
ROM Version 2.06.502.3
RADIO Version 1.16.00.00 ?????????????????????
Should I keep this radio or uupgrade it to a newer one, and if you think a newoer one than which should I try?
Gromet
Click to expand...
Click to collapse
I think the consensus is that 1.27 is best until/if GPS ever works.
WAIT!, Lat time I checked your sig, did you not have Radio 1.34? Now I see you are on 1.27. Did you downgrade for a reason? I started the 1.34 upgrade just before you posted. What are the differences between 1.27 and 1.34?
Gromet
More strangeness...
So I started the 1.34 radio upgrade, click update, phone reloads into blotloader, goes to upgrading radio stack please wait... PC shows Stage 1: Upgrading Radio, BUT it just sits there at 0% than errors out.
SO
I ran the 1.27 Upgrade, SAME THING>???????????????????
Whats goin on?
BTW, I'm on SPL 1.09 and I ran Pof's Unlocker again successfully....
Gromet said:
More strangeness...
So I started the 1.34 radio upgrade, click update, phone reloads into blotloader, goes to upgrading radio stack please wait... PC shows Stage 1: Upgrading Radio, BUT it just sits there at 0% than errors out.
SO
I ran the 1.27 Upgrade, SAME THING>???????????????????
Whats goin on?
BTW, I'm on SPL 1.09 and I ran Pof's Unlocker again successfully....
Click to expand...
Click to collapse
What is you Radio BL 107 or 108?
I had access to two separate 8525's. One had 1.34 and the other had 1.27 (BL0107). The 8525 I keep and use daily is on 1.27 with BL 0107. I am waiting for further NBH flashing directions before changing both devices to BL 0108.
When it goes into Botloader mode, it sais SPL 1.09, Where else do I find the bootloader version?
Gromet said:
When it goes into Botloader mode, it sais SPL 1.09, Where else do I find the bootloader version?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=289173&highlight=hermes+rversion
mtty
To access the radio bootloader for that, but the command to do this (rtask a) has been removed in SPL-1.09.
If you downgrade the SPL to 1.04, you can see it using radio bootloader command "rversion":
Code:
USB>rtask a
Enter Radio Bootloader
rversion
Gromet said:
OK, so something strange happened... I went to run POF's unlocker again. I ran it, but all of a sudden a ROM image begins to load? It looked like it was reloading the cingular image I loaded yesterday. Just than I get called into a meeting, when I get back, my phone is sitting there, looking the same as I left it before doing anything EXCEPT I have a G Icon now. Great, so I just checked the settings...
ROM Version 2.06.502.3
RADIO Version 1.16.00.00 ?????????????????????
Gromet
Click to expand...
Click to collapse
Gromet, this is normal behavour. Pofs unlocker flashes a hacked radio rom (1.16.00.00). Once device restarts, you need to copy the unlocker exe file (included in pof's unlocker zip) to your device, and then execute it on the device. I guess the exe that you run on the device interacts with the hacked radio to unlock the device somehow.
Once thats done, you'll get a 'success' message. Now you can download the shipped rom 1.27.00.00. Since your device is now superCID you can just exec the exe in the shipped rom directly to upgrade the radio from 1.16 to 1.27
Just make sure that you kill activesync before playing about with any rom flashing - it gets in the way.
Nigel
So yeah....
I did everything for PoF's Unlocker, and I GOT the SUCCESS message... but now I cant get any version of a radio upgrade to run. If activesync is on, It starts the upgrade and never gets past 0%, if activesync is off, i error out even before it ever starts the upgrade.
Gromet
Gromet said:
So yeah....
I did everything for PoF's Unlocker, and I GOT the SUCCESS message... but now I cant get any version of a radio upgrade to run. If activesync is on, It starts the upgrade and never gets past 0%, if activesync is off, i error out even before it ever starts the upgrade.
Gromet
Click to expand...
Click to collapse
I don't have much to add other than, 'me too'--but eventually the upgrade worked. I Ran POF's unlocker and chose supercid as well. But couldn't get past that 0% with the 1.27.00.00 radio upgrade.
I'm at:
IPL - 1.00
SPL - 1.04
While typing up this message I decided to try again and type up the error verbosely.
Sure enough the sixth try was the charm.
-g
Gromet said:
WAIT!, Lat time I checked your sig, did you not have Radio 1.34? Now I see you are on 1.27. Did you downgrade for a reason? I started the 1.34 upgrade just before you posted. What are the differences between 1.27 and 1.34?
Gromet
Click to expand...
Click to collapse
I am back to 1.34 and I created the NBH standalone Radio ROM since the new tools are available now.
You can easily go between Radio ROM again YEAH!
Here are Radio ROMs:
1.27 http://uploadingit.com/files/8194/NBH Radio Only 1.27.00.00.zip
1.33 http://uploadingit.com/files/8194/NBH Radio Only 1.33.31.00.zip
1.34 http://uploadingit.com/files/8194/NBH Radio Only 1.34.00.10.zip
wpbear said:
I am back to 1.34 and I created the NBH standalone Radio ROM since the new tools are available now.
You can easily go between Radio ROM again YEAH!
Here are Radio ROMs:
1.27 http://uploadingit.com/files/8194/NBH Radio Only 1.27.00.00.zip
1.33 http://uploadingit.com/files/8194/NBH Radio Only 1.33.31.00.zip
1.34 http://uploadingit.com/files/8194/NBH Radio Only 1.34.00.10.zip
Click to expand...
Click to collapse
So, excuse my ignorance, but are we now saying that we can upgrade the radio roms listed without ending up with the 1.08 bootloader, or alternatively that 1.08 no longer causes a problem?
Rob
I'm running vp3G latest ROM and wanted to install a radio. I thought I could install the latest 1.54 but when I do it locks up at 0% and then gives me the 262 error message. The wiki says I should have bootloader 1.04 or HARDSPL. I thought I did. Can someone help me out as to what radio will work and what are the steps to upgrading?
Thank You
Read my specs. I have the same rom you do. should work
1.54.07.00 works
1.54.07.00 works well with vp3g's roms
If you can't be past error 262, here's an option:
Copy "SSPL-HERM.exe" to your miniSD then run it from the phone.
Your phone will reboot into the BL (tri-color screen)
Connect your phone via USB to your computer
When AS finally pops up, click cancel
Run RUUWrapper.exe and force SSPL
That should do it.
MontyV77 said:
I'm running vp3G latest ROM and wanted to install a radio. I thought I could install the latest 1.54 but when I do it locks up at 0% and then gives me the 262 error message. The wiki says I should have bootloader 1.04 or HARDSPL. I thought I did. Can someone help me out as to what radio will work and what are the steps to upgrading?
Thank You
Click to expand...
Click to collapse
1.48.00.00
It reaches windows mobile, and the "tap screen to begin". It then restarts moments later. Why is it doing this????
paulash said:
It reaches windows mobile, and the "tap screen to begin". It then restarts moments later. Why is it doing this????
Click to expand...
Click to collapse
I have not seen this... but my suggestion would be to do the Power + Camera + reset... and let it go into bootloader... then just reflash the rom.
paulash said:
It reaches windows mobile, and the "tap screen to begin". It then restarts moments later. Why is it doing this????
Click to expand...
Click to collapse
Like the other guy said, force bootloader but take note of the version. Make sure you are running version 2.40 or greater. If you are running stock bootloader 1.06 or anything else it will have the reboot loop. Read the wiki in my signature fully before doing anything else. Did you read this before flashing?
QUICK question
I've put everything back to stock now.
can I install the radio AFTER I install DCD 3.2.5?????
QUICK question
I've put everything back to stock now.
can I install the radio AFTER I install DCD 3.2.5????? Because the radio 3.42.30 wouldnt boot on the stock rom, and I'd have to upgrade to 2.40 to reinstall wouldnt I?
QUICK question
I've put everything back to stock now.
can I install the radio AFTER I install DCD 3.2.5????? Because the radio 3.42.30 wouldnt boot on the stock rom, and I'd have to upgrade to 2.40 to reinstall wouldnt I?
Click to expand...
Click to collapse
You need to be upgrading to 2.40 before you do ANYTHING, not just the radio. That was probably your problem before. From stock, bootloader, radio, rom in that order.
paulash said:
QUICK question
I've put everything back to stock now.
can I install the radio AFTER I install DCD 3.2.5????? Because the radio 3.42.30 wouldnt boot on the stock rom, and I'd have to upgrade to 2.40 to reinstall wouldnt I?
Click to expand...
Click to collapse
This wiki tells you the steps.... I did it as follows... but... after doing the radio... you have to force it into the bootloader. It will not load into the phone rom.
xv6800 Rom Upgrade Instructions Wiki
gc14 said:
You need to be upgrading to 2.40 before you do ANYTHING, not just the radio. That was probably your problem before. From stock, bootloader, radio, rom in that order.
Click to expand...
Click to collapse
But doesn't 3.42.30 need SPL 1.20 to install correctly??? I don't think it'll let me install it on olipro 2.40.
paulash said:
But doesn't 3.42.30 need SPL 1.20 to install correctly??? I don't think it'll let me install it on olipro 2.40.
Click to expand...
Click to collapse
I put radio 3.42.30 on there but had to get HardSPL-2.40 on it first. The wiki explains it very well.
But doesn't 3.42.30 need SPL 1.20 to install correctly??? I don't think it'll let me install it on olipro 2.40.
Click to expand...
Click to collapse
With the ridiculously cheap prices of 1gb microsd cards these days, you'd think you all would be flashing from the card and not the crappy usb.
Anyway, if you must flash everything with usb, this is what you need to do.
From stock:
- Olipro 2.40
- Official Sprint 3.56 Rom Update for Radio 3.42.02 (DON'T LET CUSTOMIZATIONS RUN!!!)
- 3.2.5
- Olipro 1.20
- Radio 3.42.30
- Olipro 2.40
See the hassle it is when you don't flash from the card?
gc14 said:
With the ridiculously cheap prices of 1gb microsd cards these days, you'd think you all would be flashing from the card and not the crappy usb.
Anyway, if you must flash everything with usb, this is what you need to do.
From stock:
- Olipro 2.40
- Official Sprint 3.56 Rom Update for Radio 3.42.02 (DON'T LET CUSTOMIZATIONS RUN!!!)
- 3.2.5
- Olipro 1.20
- Radio 3.42.30
- Olipro 2.40
See the hassle it is when you don't flash from the card?
Click to expand...
Click to collapse
I didn't go through those steps GC. I did the olipro 2.40... then the 3.42.30... then had to force it into bootloader.... then did the DCD 3.2.3 update. That's it... and all done via USB cable.
nitro66215 said:
I didn't go through those steps GC. I did the olipro 2.40... then the 3.42.30... then had to force it into bootloader.... then did the DCD 3.2.3 update. That's it... and all done via USB cable.
Click to expand...
Click to collapse
Damn GC, that's a lot of extra work compared to what I have people doing in my tutorial...
gc14 said:
With the ridiculously cheap prices of 1gb microsd cards these days, you'd think you all would be flashing from the card and not the crappy usb.
Anyway, if you must flash everything with usb, this is what you need to do.
From stock:
- Olipro 2.40
- Official Sprint 3.56 Rom Update for Radio 3.42.02 (DON'T LET CUSTOMIZATIONS RUN!!!)
- 3.2.5
- Olipro 1.20
- Radio 3.42.30
- Olipro 2.40
See the hassle it is when you don't flash from the card?
Click to expand...
Click to collapse
There's a REALLY annoying problem going on. I had to reflash to stock twice again. 2.40 installs successfully, and im in the boot loader. I open up the sprint 3.56 (and 3.42.02 radio) with the RUU, and it just reverts to SPL 1.20!!!! Why does this keep happening?
scrawnyb said:
Damn GC, that's a lot of extra work compared to what I have people doing in my tutorial...
Click to expand...
Click to collapse
Why does everybody say you must have an SD card to do the upgrades? I never did anything with an SD card and was able to flash all the way to 3.2.5 without it.
paulash said:
There's a REALLY annoying problem going on. I had to reflash to stock twice again. 2.40 installs successfully, and im in the boot loader. I open up the sprint 3.56 (and 3.42.02 radio) with the RUU, and it just reverts to SPL 1.20!!!! Why does this keep happening?
Click to expand...
Click to collapse
It's because you aren't into the true HARD spl. You have the soft 2.40 spl. You have to verify that the bootloader is 2.40 by doing the power + camera + reset.
nitro66215 said:
It's because you aren't into the true HARD spl. You have the soft 2.40 spl. You have to verify that the bootloader is 2.40 by doing the power + camera + reset.
Click to expand...
Click to collapse
I have the hard SPL. I'll verify it again once stock rom reinstalls (I have to keep reinstalling to stock everytime it switches back to SPL 1.20... really frustrating).
paulash said:
I have the hard SPL. I'll verify it again once stock rom reinstalls (I have to keep reinstalling to stock everytime it switches back to SPL 1.20... really frustrating).
Click to expand...
Click to collapse
It shouldn't be reverting back to 1.2. If you have 2.4 installed correctly... and you check with the "Reset"... then you can do the RUU update right from that bootloader screen. If it is 1.2... then attempt the 2.40 hard spl from that screen instead of redoing the stock rom.
nitro66215 said:
Why does everybody say you must have an SD card to do the upgrades? I never did anything with an SD card and was able to flash all the way to 3.2.5 without it.
Click to expand...
Click to collapse
Who said you HAVE to do this by SD? I think we are saying it is easier.
GC detailed that to flash by USB/Activesync is about six or seven steps and about an hour of work, versus flashing by SD which is less than five minutes and a step or two.
serfboreds said:
Who said you HAVE to do this by SD? I think we are saying it is easier.
GC detailed that to flash by USB/Activesync is about six or seven steps and about an hour of work, versus flashing by SD which is less than five minutes and a step or two.
Click to expand...
Click to collapse
I don't agree that the USB / Activesync is 6 or 7 steps. I did 4 or 5 at the most.. and I'm counting the power+camera+reset as a step.
flash
When the bootloader screen comes up with 1.2, are you just assuming its done...or do you actually then keep clicking through the options until it actually flashes the phone with the ROM?
i was with DCD 3.2.5 and wanted to flash to new telus wm6.1 from telus... now i'm stuck with bl spl-2.07...tried to flash back with stock rom Telus_HTC_P4000_WM6_07252007 but at 1% it says not compatible...tried also uni_exitbootloader but nothing happen...whenever tried to flash with SD card...it's always keep saying "loading...", is anyone have suggestion to bring back my mogul to life?
thanks
uhh 2.07 is a relocker SPL
I think you have to downgrade to a stock firmware/SPL, then do the process properly.
Use SPL 2.40 or 2.47 before trying to flash on a GPS rom.
scrawnyb said:
uhh 2.07 is a relocker SPL
I think you have to downgrade to a stock firmware/SPL, then do the process properly.
Use SPL 2.40 or 2.47 before trying to flash on a GPS rom.
Click to expand...
Click to collapse
I would say the same. I would go ahead and unlock OliPro 2.4 (never tried 2.47) then flash Telus rom. After doing so you should be fine.
scrawnyb said:
uhh 2.07 is a relocker SPL
I think you have to downgrade to a stock firmware/SPL, then do the process properly.
Use SPL 2.40 or 2.47 before trying to flash on a GPS rom.
Click to expand...
Click to collapse
what do you mean by "I think you have to downgrade to a stock firmware/SPL" ? du you have any recommendation ?
belmont said:
what do you mean by "I think you have to downgrade to a stock firmware/SPL" ? du you have any recommendation ?
Click to expand...
Click to collapse
Sorry, I read his post wrong. HEre is what I would do:
1. Download OliPro 2.40 and run it. Ignore the part that asks you to verify the Active Synch connection. Its not needed for anything but a connection confirmation.
2. After running OliPro 2.40 you should be stuck at the three color bootloader screen, Like you are now. If not hold Camera and Power and use stylus to put phone in bootloader. Make Sure it says OLIPRO 2.40 for the version on the bootloader. If not then re-run oliupro and make sure to follow the directions. Especially noting that it asks you to disconnect then reconnect the device.
3. Flash your Stock ROM back.
4. Hard Reset.
In my experience you do not have to go back to a stock ROM to flash a new carrier ROM as long as you have OliPro.
Let me ask you this: What exact steps did you take when you flashed Telus ROM image?
I was on the same setup you were, DCD 3.2.5 with Radio .50 and OliPro 2.40. I simply flashed the Telus image and all was well for me. Hell it was better than all well. This is the best ROM I have ever used. PERIOD. No, its not pretty but damn, its fast as anything I have used and the GPS is insane!
BTW: Im a Verizon user. Anyone know how to make the phone not say "Telus" when I go to the connection manager?
scrosler said:
Sorry, I read his post wrong. HEre is what I would do:
1. Download OliPro 2.40 and run it. Ignore the part that asks you to verify the Active Synch connection. Its not needed for anything but a connection confirmation.
2. After running OliPro 2.40 you should be stuck at the three color bootloader screen, Like you are now. If not hold Camera and Power and use stylus to put phone in bootloader. Make Sure it says OLIPRO 2.40 for the version on the bootloader. If not then re-run oliupro and make sure to follow the directions. Especially noting that it asks you to disconnect then reconnect the device.
3. Flash your Stock ROM back.
4. Hard Reset.
In my experience you do not have to go back to a stock ROM to flash a new carrier ROM as long as you have OliPro.
Let me ask you this: What exact steps did you take when you flashed Telus ROM image?
I was on the same setup you were, DCD 3.2.5 with Radio .50 and OliPro 2.40. I simply flashed the Telus image and all was well for me. Hell it was better than all well. This is the best ROM I have ever used. PERIOD. No, its not pretty but damn, its fast as anything I have used and the GPS is insane!
BTW: Im a Verizon user. Anyone know how to make the phone not say "Telus" when I go to the connection manager?
Click to expand...
Click to collapse
thanks for quick reply. i tried so many times to use olipro 2.40...whenever i ran it...it popup that device is not connected and asked me to try again...tried also with SD but still hung on tri-color bars
belmont said:
thanks for quick reply. i tried so many times to use olipro 2.40...whenever i ran it...it popup that device is not connected and asked me to try again...tried also with SD but still hung on tri-color bars
Click to expand...
Click to collapse
Thats interesting. I have hosed so many XV6800's and used OliPro and a stock GPS sprint ROM to get them back (Thanks alot for nothing Verizon!).
IM assuming you are still on the tricolor screen? Take out battery and place back in. Then try again. Dont wait long. Someonelse has discoverd the phone can only be connected for so long before it "drops" connection with the windows machine. Someone else's therory but I can certainly second it.
What SPL were you using with DCD 3.x before upgrading?
scrosler said:
Thats interesting. I have hosed so many XV6800's and used OliPro and a stock GPS sprint ROM to get them back (Thanks alot for nothing Verizon!).
IM assuming you are still on the tricolor screen? Take out battery and place back in. Then try again. Dont wait long. Someonelse has discoverd the phone can only be connected for so long before it "drops" connection with the windows machine. Someone else's therory but I can certainly second it.
What SPL were you using with DCD 3.x before upgrading?
Click to expand...
Click to collapse
before flashing to new telus wm6.1 rom, i had olipro 2.40 with .30 radio and dcd3.2.5 kitchen...i have tried upgrading to radio .50 with no success. but failing to update radio didn't affect anything to my phone. tried your suggestion by romoving battery and still telling me that device not connected.
belmont said:
before flashing to new telus wm6.1 rom, i had olipro 2.40 with .30 radio and dcd3.2.5 kitchen...i have tried upgrading to radio .50 with no success. but failing to update radio didn't affect anything to my phone. tried your suggestion by romoving battery and still telling me that device not connected.
Click to expand...
Click to collapse
Hmmm, maybe try a different USB port at this time. Also, try this...
Before you connect your device open device manager in Windows. Look for M/S USB sync to appear after you connect. What OS are you using? This is what it will look like in Vista.
In XP I beleive it will show up under USB at the very bottom of Device Manager.
Does the phone show up at all?
Flash a stock pre-gps rom first.....then go ahead and upgrade the hard spl to 2.4 or 2.47.....then flash away with whatever you want....
You cannot flash Hardspl to Hardspl...they have overwrite protection not signed by HTC....
..................................
Anyone encountered this error before? It gets to 8% and then phone reboots and I get this on my PC screen. It says Error [328] (see attached image)
I am using Radio 3.37.75 (verizon), and my bootloader shows 2.40 Olipro
Any ideas?
Try this RUU it is version 3.16.4.3.
Yes, thats the version that I am using. I think... when I run it, it says 3.16.4.3 in the window title bar. (see screen shot)
EDIT: I tried it anyways, and I got the same thing. Do I have the right bootloader? Would a different one help?
what are you trying to flash
trying to flash my verizon xv6800 (which has an old dcd rom on it, radio 3.27 i think) to the new radio: 3.37.75.
Then i will flash with a newer dcd or ryan mogul rom.
wildcard said:
trying to flash my verizon xv6800 (which has an old dcd rom on it, radio 3.27 i think) to the new radio: 3.37.75.
Then i will flash with a newer dcd or ryan mogul rom.
Click to expand...
Click to collapse
Just follow my post here and only use the files and Radios that I provide. Make sure you read a few times so you understand, and dont skip anything. Most important based on what I have read in this thread. Use only the radios I provide on my share site and take your time paying close attention.
http://forum.xda-developers.com/showpost.php?p=3687027&postcount=144
Thanks, I'll do it exactly like that. I will keep you posted. I have to get a new micro SD card, I only have an SDHC 8 GB
The radio can be updated via usb. I do it all the time. But it does hard reset the phone in the process.
I would try a newer radio like 3.42.40. http://wiki.xda-developers.com/index.php?pagename=TitanRadioROMs
I got my radio from there and have no problems updating the radio with ruu.
I followed the directions exactly like in Ryan's post mentioned above, (used USB instead of SD card), and it works!
Fully functional. I used Radio 3.42.02 (somewhere I saw that it was recommended over the others, went with it to be safe). Then Flashed Ryan Mogul Rom 2.2 Heavy.
Thanks everyone!
drewcam888 said:
I would try a newer radio like 3.42.40. http://wiki.xda-developers.com/index.php?pagename=TitanRadioROMs
I got my radio from there and have no problems updating the radio with ruu.
Click to expand...
Click to collapse
i have spl olipro-2.40, rom dcd 3.2.6 and want to upgrade radio to 3.42.50 using usb. should i downgrade spl to 1.20 before upgrade the radio? or i stick with current config and update the radio using RUU?
Still cant load radio
Obtained 6800 originally Alltel, not sure which radio, Had Olipro 2.40 installed, would hang on Alltel splash screen.
Could not get any RUU loads to complete (from USB or SD card), usually would fail around 50%.
Eventually was able to get RyanMogul 3.1 Cricket (lite) to load, but shows no radio and eventually screen goes blank. Never goes into active Sync mode.
We force boot loader mode and try and load several radios including Titan_Radio_ROM_3.42.50.Alltel.rar, Titan_Radio_ROM_3.35.04,
but keep Getting error 328 from RUU when I try to load a radio..
tried RyanMoguls "Here is a fix for GPS for all you VX6800 users that gps will not function!!", but cant run relocker because no active sync connection.
Stock Verizon ROM RUU also gets error 328.
Any ideas.