Taken from Alltel ROM: HTC PPC6800 WM6.1 / LBS Update – Version 3.52.671.9
http://www.htc.com/us/SupportDownload.aspx?p_id=63&cat=2&dl_id=114
Before anyone asks WHY I am posting this, I am posting it because I have been unable to find this myself, as only having seen the 3.42.50 radio ported over from the Vogue.
So once more, this is an OFFICIAL radio for the Titan version 3.42.50, which was released with the Alltel PPC6800 update v3.52.671.9
Downloads moved to: http://www.4shared.com/dir/13348483/9d4d857d/sharing.html
file is named Titan_Radio_ROM_3.42.50-Alltel.exe
Any questions, or comments are welcome.
Interesting find, thanks. Do you see any difference with this radio?
I haven't really noticed much of a difference.
Everything works as it should, and where I'm at, I always have full signal strength, so I'm not a good person to be judging this.
Hopefully someone else can let you know.
Also, post your results here.
Edit: I am seeing 6~8 satellites with the GPS, which was an improvement, but I'm not using the PDE servers as it requires data and I'm not using a data plan.
scrawnyb said:
....having seen the 3.42.50 radio ported over from the Vogue.
Click to expand...
Click to collapse
I'm curious will this radio work for Sprint? DCD has posted all the radios for the Titan but I'm not sure if his was a port from Vogue or not.
DCD Radios
Comparing the two radios this is what I see using NBHextract:
C:\Test>nbhextract TITAIMG.nbh [DCD's radio 3.42.50]
=== NBHextract v1.0
=== Extract contents from HTC NBH files
=== (c)2007 xda-developers.com
=== by: pof & TheBlasphemer based on itsme perl scripts
Device: TITA10000
CID: HTC__001
Version: 3.42.50
Language: USA
Extracting: 00_GSM.nb
Alltel Radio:
C:\Test>nbhextract 3.42.50_alltel.nbh
=== NBHextract v1.0
=== Extract contents from HTC NBH files
=== (c)2007 xda-developers.com
=== by: pof & TheBlasphemer based on itsme perl scripts
Device: TITA10000
CID: SuperCID
Version: 1.98.3
Language: WWE
Extracting: 00_GSM.nb
Any guesses?
I installed it on my Sprint mogul. So far its good. I don'tt see anything new with this radio.
moblues said:
I'm curious will this radio work for Sprint? DCD has posted all the radios for the Titan but I'm not sure if his was a port from Vogue or not.\
Click to expand...
Click to collapse
It will work fine on Sprint. I'm running it on Verizon.
When I say Alltel, it was stripped from the Alltel ROM, but it is compatible for all Titan devices.
DCD's release was ported over from the Vogue device, and hence the only reason why I'm releasing this official one, as this one was MADE for the Titan.
It is indeed radio 3.42.50, I forgot to change it in the NBH file, but it won't affect anything.
I've been running it on Sprint after getting it from the Alltel stock ROM flash. Works just fine. No issues.
moblues said:
I'm curious will this radio work for Sprint?
Click to expand...
Click to collapse
Radios are not carrier specific, only device specific... this will work with any carrier who has the titan.
do i have to use SD card to flash this radio? i have spl 2.40 and it didnt work for me.
You can use SD card. Just unzip the file in first link to root of SD card. Some times it take few tries to go into bootloader for it to find the file.
polobreaka said:
do i have to use SD card to flash this radio? i have spl 2.40 and it didnt work for me.
Click to expand...
Click to collapse
Flagmax said:
You can use SD card. Just unzip the file in first link to root of SD card. Some times it take few tries to go into bootloader for it to find the file.
Click to expand...
Click to collapse
Make sure it's no more than 2 gb and isn't an hcsd card, won't work otherwise
scrawnyb said:
It will work fine on Sprint. I'm running it on Verizon.
When I say Alltel, it was stripped from the Alltel ROM, but it is compatible for all Titan devices.
DCD's release was ported over from the Vogue device, and hence the only reason why I'm releasing this official one, as this one was MADE for the Titan.
It is indeed radio 3.42.50, I forgot to change it in the NBH file, but it won't affect anything.
Click to expand...
Click to collapse
Ahhhh.... yeah, cause the version is the only thing that worried me. DCD's 3.42.50 has been terrible for me so I wanted to make sure. I'll flash now and see. Thanks for pulling that radio out of Alltel!
I upgraded to this rom... had problems getting to to load.. but once I did..... it installed...
now I dont have a data plan so I really havent seen any benefit to the new radio... Although today I had 9/9 sats... and carried it into work.... and got to my desk and still had 4/9 sats.... THAT IS IMPRESSIVE FOR ME!!!!!
I usually loose signal inside work...
now on the startup time.. with no data plan and no towers to bank off of... usually it takes 1-3 minutes to sync.... but today it took about 10 seconds!!!! not sure what the difference is so far but I like it...
now im reading up on the roms... I see a lite version.... OOOOHHHHHH ME LIKES!!!!
GPS problems
Hey
I'm using this 3.42.50 radio with scrosler's ROM(see sig). I'm having trouble locking in GPS satelites using Google maps. I'm on sprint and can't do the GPS fix. Is there anything else I can do to increase my satelite locking ability?
The RUU keeps telling me that I can't use this update utility with this device.
Do I need to downgrade existing radio somehow first?
I've been using DCD's 2.42.50 radio for several months now on my Alltel Titan (also running his 3.3.4 ROM w/Manilla 2D). Never had any problem with it at all. Worked perfectly for me from day one. GPS working flawlessly with it, I see no need to "update"...
MetalHd said:
The RUU keeps telling me that I can't use this update utility with this device.
Do I need to downgrade existing radio somehow first?
Click to expand...
Click to collapse
If you are flashing thru RUU on a 3.x radio, you have to downgrade the SPL to I believe (double check before trying) to 1.2, however it is much easier and much preferred to flash via SD card for more accurate flashing. Any time you flash via cable you take that chance of the cable coming loose, PC losing power, etc. Any of which could brick the phone. Roms are safer to flash via cable since you don't have to downgrade/upgrade to do it. And can usually be recovered from by just reflashing. I know from experience as this happened to me. Not so sure about the radio since it provides so much function for the phone.
I recommend going and picking up a 512mb or 1gb card, they are dirt cheap and provide a safer flashing option.
BTC
what is the different between DCAAXAM-4350H and DCAAXOM-4350H?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
agismaniax said:
what is the different between DCAAXAM-4350H and DCAAXOM-4350H?
Click to expand...
Click to collapse
I believe the post you read that made you paranoid was from some guy in my thread.. I am using the Radio he claims only works on 1X yet I have EVDO all day which is DCAAXOM-4350H.. Dont let peoples useless muttering keep you from trying things out.
sheeze... DCD's site is down (at least for me), and all other links to Radios/SPL's are dead... FML...
Related
This the Alltel 3.35.671.9 ROM with GPS enabled (it is not enabled in the OEM ROM). Enabling GPS is the only difference this will make to your phone. This is OS-only so you will need to flash the OEM ROM first.
Download GPS-enabled Alltel ROM
1. Flash the original Alltel 3.35.671.9 ROM.
2. Connect to PC and copy TITAIMG.nbh from my ROM to a MicroSD and remove it from the phone. Or alternatively, use WinRAR to extract all the files from the original .exe file from step 1 and replace RUU_Signed.nbh with my TITAIMG.nbh file.
3. Install Hard-SPL 2.40 from Olipro Link
6. Reinsert MicroSD and hit RESET. TITAIMG.nbh will install. If it does not, hold POWER+CAMERA while pressing RESET, you will briefly see the tri-colored bootloader screen and it should load the ROM. Or if you extracted the RUU from the original .exe file, just run RomUpdateUtility.exe.
GnatGoSplat said:
Someone on PPCGeeks requested an Alltel version of the GPS ROM with all the original apps (Office Mobile specifically) intact so here's my contribution. I figured I'd go ahead and post here since PPCGeeks is down right now.
http://rapidshare.com/files/87429906/Alltel_3.16.615.0_Titan.rar
The only change is I stripped Sprint stuff out, added Alltel stuff in. No other changes whatsoever. It will fix your splash screens and extended ROM back to Alltel if you flashed the official leaked Sprint firmware.
There is no IPL/SPL or radio in this ROM. You must first flash the 3.27 radio and Olipro Hard-SPL 2.40 first. Then copy TITAIMG.nbh to a FAT32 formatted MicroSD. Put the MicroSD in the phone and press POWER+CAMERA while pressing RESET to get into the bootloader. It will begin flashing automatically. No RUU is included because I couldn't get the RUU to work with Hard-SPL 2.40. However, maybe my old USB 1.1 laptop is the cause. If you'd prefer to try an RUU, just rename the file to RUU_signed.nbh.
Click to expand...
Click to collapse
the ruu works fine for me with spl 2.40, and you dont have to rename it at all, as long as there is only one .nbh file in your ruu folder.
THANKS!
Wish Me Luck!
THANK YOU!!! Downloading now.
Booo!
bushido1 said:
Wish Me Luck!
Click to expand...
Click to collapse
ppcgeeks is having technical difficulties. I can't get radio 3.27. Maybe tomorrow. I was so pumped for this.
ftp://up.ppcgeeks.com/
user: ppcgeeks
pass: ezupload
then /titan/users/angel12
the radio is in there. and soon my alltel rom
fallingup said:
the ruu works fine for me with spl 2.40, and you dont have to rename it at all, as long as there is only one .nbh file in your ruu folder.
Click to expand...
Click to collapse
I never could get the Alltel WM6 RUU to work with SPL 2.40, nor the one that came with the Sprint leaked FW, nor one I downloaded from your FTP. They always cause the phone to reset at 1% and I get "ILLEGAL COMMAND" on the RUU. They all worked just fine with the old Hard-SPL 1.20 and also the 1.06 in the relocker. Weird. My laptop won't ActiveSync with any of my devices unless I turn off "Advanced network connectivity" in the control panel either, so it must be my old Thinkpad laptop. It's a P-III antique.
At any rate, flashing this ROM will be even easier for those who can use an RUU.
I don't know if anyone is interested, but I've updated this ROM for 3.35.651.2.
Nevermind.
Updated for 3.35.671.9.
guys, i downloaded the new Alltel ROM yesterday. As stated, still wm6 but with RevA capability. I'm new to this stuff, but it looks like the above alltel ROM just gives the new stock ROM GPS capability. Is that correct?
Yes, it is a permanent way to get GPS capability with the stock ROM.
I theorize the necessary changes can be made into a simple cab file so you don't need to flash the ROM unless you want the GPS enabled permanently. I plan to make a cab later today as some people want to try it out.
yeah that would be cool.i have the new Alltel Radio, and i'm running DCD 3.0.1. the reason i went with 3.0.1 was i thought it enabled GPS. Now that i've got my device up and running, i see it does not.
DCD3.01 does infact have working GPS my friend.....
could be, if that's true my alltel engineer friends doesn't know about it. He told me GPS would not be enabled on the 6800 with Alltel. He even runs DCD, he can get it with a Sprint Radio, but not with the Alltel radio. again, that's just what he told me.
What he meant to say was that the ALLtel update does NOT include the drivers (3 of them) in the operating system thereby not enabling it, but the radio itself will allow GPS to work.... I'm flashing it right now, be back in a bit.... If you flash a DCD 3.0.x ROM you will have GPS drivers.....
gotcha. i'm not doubting you..just wasn't sure of that.
i have dcd3.0.1 for alltel. 3.0.4 was taken down. I didn't think the radio was going to allow it..that's why a few friends i have are using the sprint radio. I'm a techy, but not in this world, so i'm learning...
jshaas2 said:
gotcha. i'm not doubting you..just wasn't sure of that.
i have dcd3.0.1 for alltel. 3.0.4 was taken down. I didn't think the radio was going to allow it..that's why a few friends i have are using the sprint radio. I'm a techy, but not in this world, so i'm learning...
Click to expand...
Click to collapse
3.0.4 rom was never put up for alltel, thus never taken down
GPS does work with the alltel 3.37.20 radio and any dcd 3.x.x, on any carrier.
Is there any real improvements to this radio or is it just a higher number? Thus intreguing people.
azclown said:
...the ALLtel update does NOT include the drivers (3 of them) in the operating system thereby not enabling it, but the radio itself will allow GPS to work....
Click to expand...
Click to collapse
If it is only three drivers, couldn't we just nab them from a GPS enabled ROM and manually copy them to the proper folders?
I take no responsibility for anything you do to your device.
Titan Radio ROM 3.42.50 is HERE.
Taken from Vogue 3.08 release from Bell.
Use SD card to update.
Tested and working on my device.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
New Radio
DCD do you see any difference with this radio as far as the loud tones that come up with call waiting? and is there any difference on GPS?
dcd1182 said:
I take no responsibility for anything you do to your device.
Titan Radio ROM 3.42.50 is HERE.
Taken from Vogue 3.08 release from Bell.
Use SD card to update.
Tested and working on my device.
Click to expand...
Click to collapse
Anything need to be done with the A-key or other numbers in EPST? And... look at you... teasing us with dcd 3.2.6.... What's up with that? LOL
Upgraded radio rom did not need to get a new A key and I am sitting in a concrete room with no windows and am picking up 4 satellites off the HTC GPS tool, will continue to test the gps and see it I continue to get a good to great signal. So far am impressed with this radio much faster gps lock than with 3.42.30. Thanks dcd....
I am picking up 4 to 5 satellites with the GPS tool within 5 to 10 seconds. I think I will stay with this radio for awhile.....
Just to relate to the difference with these 2 radio roms 3.42.30 and 3.42.50, with the .30 rom I could never pickup a satellite in my concrete bunker for an office but am picking up and locking onto 4 to 5 satellites within seconds on the .50 rom...
DV8 said:
Upgraded radio rom did not need to get a new A key and I am sitting in a concrete room with no windows and am picking up 4 satellites off the HTC GPS tool, will continue to test the gps and see it I continue to get a good to great signal. So far am impressed with this radio much faster gps lock than with 3.42.30. Thanks dcd....
Click to expand...
Click to collapse
I figured that being I already had a GPS radio on it that this wouldn't change anything. Thanks. Loading as I type.
Edit: I cannot even get Google Maps to Initialize GPS now. I have the same settings as before. I will try to switch it to 911... then to location on... and see what that does.
I had BAF's GPSToggle on... turned it off... and Google Maps "Initialize GPS" does go away now. But... it still is taking forever (more than a minute) to get any syncs
Edit: Ok... ON a fresh boot. Shutting the phone off and turning it back on... It takes more than a minute to initialize the GPS. Once this is done. I can turn the Toggle off... / Exit Google Maps... and the next time I start either application... it locks in seconds.
I can't test very well in my building, but I see that ephemeris data is rolling and it sees some information. Seems typical so far but I will report back.
Good news for another issue though, I did test and found out that the call waiting thing (annoying sound) didn't happen after flashing this radio. I had 3.42.30 loaded this morning and got the sound. I flashed to 3.42.50 and it didn't happen just now. Not sure if this is coincidence but good anyways.
I have never gotten that call waiting sound in all the time I've used 3.42.30.
finally
I finally went and got a 2gb Micro-SD card from Fry's yesterday. Flashed from SD card and took like 2 minutes. Way better than USB!
Thanks for the Radio DCD!
Is flashing via SD the only way? either my card or adapter is on the fritz
worldwidepmp said:
Is flashing via SD the only way? either my card or adapter is on the fritz
Click to expand...
Click to collapse
Nope. You can flash via USB. Follow the steps found in the Titan Recent Wiki here... Titan Recent
nitro66215 said:
Nope. You can flash via USB. Follow the steps found in the Titan Recent Wiki here... Titan Recent
Click to expand...
Click to collapse
Thanks, I know how to flash via USB too but i've read sometimes flashing radios doesn't always work that way.
worldwidepmp said:
Thanks, I know how to flash via USB too but i've read sometimes flashing radios doesn't always work that way.
Click to expand...
Click to collapse
Gotcha. Yeah... when I first did my phone.... that's how I did it. Via USB. I didn't have a regular SD card. I had no issues doin it that way.
Gotcha. Yeah... when I first did my phone.... that's how I did it. Via USB. I didn't have a regular SD card. I had no issues doin it that way.
Click to expand...
Click to collapse
Nitro, you didn't have to use SPL 1.20 for this one when flashing via USB?
I'm just waiting for some more reviews about the GPS before I upgrade. Anyone else try this out?
gc14 said:
Nitro, you didn't have to use SPL 1.20 for this one when flashing via USB?
Click to expand...
Click to collapse
Nope. i updated to 2.40 from the stock 1.04 like the Wiki said. Then went to the radio 3.42.30 after the Hard_SPL update.
As far as going to 3.42.50... I just did the SD card way since I have a non SDHC card now.
nitro66215 said:
Nope. i updated to 2.40 from the stock 1.04 like the Wiki said. Then went to the radio 3.42.30 after the Hard_SPL update.
As far as going to 3.42.50... I just did the SD card way since I have a non SDHC card now.
Click to expand...
Click to collapse
I couldn't do .30 via USB, and can't do .50 either. The RUU utility runs, gets to 8%, a red light flashes on my phone, and it reboots.
To update the radio via USB, I *think* you need to go back to 1.20. Don't quote me on that though, because my memory sucks. I'm to old to be hacking phones!
I couldn't do .30 via USB, and can't do .50 either. The RUU utility runs, gets to 8%, a red light flashes on my phone, and it reboots.
To update the radio via USB, I *think* you need to go back to 1.20. Don't quote me on that though, because my memory sucks. I'm to old to be hacking phones!
Click to expand...
Click to collapse
That's exactly what I was trying to figure out. I flash everything with microsd so I'm not about to test it. Was waiting for someone who flashes via USB to test it.
Just a note to everyone reading this, if you follow those wiki instructions and flash via USB, you need to use TitanUnlocker first to install SPL 1.20, flash the radio, then reinstall SPL 2.40. Same as Radio 3.42.30 USB installation.
anton_spaz said:
I couldn't do .30 via USB, and can't do .50 either. The RUU utility runs, gets to 8%, a red light flashes on my phone, and it reboots.
To update the radio via USB, I *think* you need to go back to 1.20. Don't quote me on that though, because my memory sucks. I'm to old to be hacking phones!
Click to expand...
Click to collapse
It was tricky getting the Software to recognize the phone without activesync. But... I followed the Titan Recent wiki. And did have 2.40 on the phone when I did the Radio update.
nitro66215 said:
It was tricky getting the Software to recognize the phone without activesync. But... I followed the Titan Recent wiki. And did have 2.40 on the phone when I did the Radio update.
Click to expand...
Click to collapse
I remember now.... I had to wait until someone put out the .30 exe to install via USB. Don't know why, but that method worked for .30 for me. Guess I'll have to wait until someone makes the exe again, for .50
I think I've flashed SOMETHING on my phone once a week or more for about 6 months straight now.
ok guys, I have honestly read a s*#t load of threads regarding the installation of this ROM.
I cannot make sense of all the back and forth.
Is it possible to get an idiots simple step by step guide?
I have a Telstra branded HD2, and have 1.72 WWE ROM, with HSPL3, SPL-2.08.
What do I need to do to install the new 3.14 WWE ROM, so I do NOT get the 50Mb RAM issues? Do I need to downgrade first, flash HSPL, SPL etc etc.
Thank you in advance. I hope I can get it sorted.
hgalanos said:
ok guys, I have honestly read a s*#t load of threads regarding the installation of this ROM.
I cannot make sense of all the back and forth.
Is it possible to get an idiots simple step by step guide?
I have a Telstra branded HD2, and have 1.72 WWE ROM, with HSPL3, SPL-2.08.
What do I need to do to install the new 3.14 WWE ROM, so I do NOT get the 50Mb RAM issues? Do I need to downgrade first, flash HSPL, SPL etc etc.
Thank you in advance. I hope I can get it sorted.
Click to expand...
Click to collapse
You can't install a Telstra branded Stock rom (there isn't yet one) without using HSPL.
But using HSPL on this particular Stock rom will means you will only get +/- 50mb of program memory.
I am not after a Telstra ROM.
I have installed Official 1.72 WWE ROM, but it has the Chinese integration. Although the ROM is ok for now.
I want to upgrade to non Telstra, Official 3.14 WWE ROM, need to knwo what SPL/HSPL I need for the RAM to work.
kurt-willems said:
You can't install a Telstra branded Stock rom (there isn't yet one) without using HSPL.
But using HSPL on this particular Stock rom will means you will only get +/- 50mb of program memory.
Click to expand...
Click to collapse
Interesting.
I'm in the same boat: I'm using Hong Kong (HKSCL_WWE) 1.72.831.1 ROM with HSPL3 (2.08) on a Telstra branded HD2. I was looking at upgrading the 3.14 WWE but I was a bit unsure.
So you are saying I should either:
*. Wait for a Telstra 3.14 ROM update <- not that I would anyway, for Telstra ROM's are bloated.
or
*. Wait for a new version of HSPL which supports 3.03 SPL?
yeah, if you don't will be stock on +/- 50Mb of program memory you need to wait fore a compatible HSPL version who match with the integrated SPL 3.03!
hgalanos said:
I am not after a Telstra ROM.
I have installed Official 1.72 WWE ROM, but it has the Chinese integration. Although the ROM is ok for now.
I want to upgrade to non Telstra, Official 3.14 WWE ROM, need to knwo what SPL/HSPL I need for the RAM to work.
Click to expand...
Click to collapse
Maybe I wasn't clear the first time, but you can't upgrade a stock rom to a Telstra branded device without using HSPL (HSPL 3 2.08) But this means you only have +/- 50Mb of free program memory left.
Thanks for the clarification.
The sad part is that it does not appear to be any development in a new HSPL at the moment.
I flashed the WWE version.
Initially Bricked the phone, just like most people did. I had to reFlash using a 1.43 stock ROM to recover it.
Then, after extracting the EXE file i used CustomRUU to reflash 3.14, so no radio and no SPL flash. I got the 448MB RAM, and a super smooth rom experience. My SPL is 1.6.
I managed to upgrade the radio to 2.09.51.03_2 and still have the 448MB RAM.
Hope this helps.
toff74 said:
I flashed the WWE version.
Initially Bricked the phone, just like most people did. I had to reFlash using a 1.43 stock ROM to recover it.
Then, after extracting the EXE file i used CustomRUU to reflash 3.14, so no radio and no SPL flash. I got the 448MB RAM, and a super smooth rom experience. My SPL is 1.6.
I managed to upgrade the radio to 2.09.51.03_2 and still have the 448MB RAM.
Hope this helps.
Click to expand...
Click to collapse
Yes but how many free storage memory u have???
I think no more than 50 mb
maximus9314 said:
*. Wait for a Telstra 3.14 ROM update <- not that I would anyway, for Telstra ROM's are bloated.
or
*. Wait for a new version of HSPL which supports 3.03 SPL?
Click to expand...
Click to collapse
maximus9314 said:
Thanks for the clarification.
The sad part is that it does not appear to be any development in a new HSPL at the moment.
Click to expand...
Click to collapse
if the telstra rom comes before hspl you can use that to get spl3 and then use SSPL to flash the wwe or 3.x based cooked roms, so no need for the telstra bloat.
(at least i assume SSPL will do it,, i've not seen it confirmed, but it's the first thing i'll try when o2 spits a 3.x rom out.)
jabana said:
Yes but how many free storage memory u have???
I think no more than 50 mb
Click to expand...
Click to collapse
I have around 150MB..
SPL1.66 with the radio stated...
Here it is
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
the title of this thread sounded perfect and it started off really well but seems to have died a death.
I consider my self to be a reasonably intelligent person and computer literate. i am a vb.net programmer and oracle programmer. i bought a stock hd2, installed hspl 2.08 and have been doing every artemdes rom release since.
this new rom has me totally stumped though.
i understand i need to install the new spl and if i dont the phone will quickly resart, fail and generally mess up because i am using hspl 2.08 with a new rom (3.14) that needs the new spl 3.03. i understand that.
I understand i need to flash the rom from a memory card to get the hspl over written.
i downloaded the rom, renamed it leoimg.nbh and put the rom on the root of a freshly formatted sd card and booted into the bootloader and got nothing. prob because of my 16gb mem card. okay i got that one.
so what now are my options?
1) stick with hspl 2.08 and atemedes rom 37
2) wait for a hspl okay with 3.03 (does not look like its happening)
3) buy a new memory card and boot from that via the leo img track and hope for the best?
4) try to install hspl 2.08 again, tell it to install spl 1.66 and then install the new rom via usb?
am i correct in those? also, what happens with the radio, do i have to have a specific one installed before the flash or will the flash install the correct radio as well?
toff74 said:
I have around 150MB..
SPL1.66 with the radio stated...
Here it is
Click to expand...
Click to collapse
oh yes ofcourse, i was try this way to... More, after install HSPL over it still was have 170-180 MB...
But when i install new radio 2.15.50.14, immediately have only 50MB
jabana said:
oh yes ofcourse, i was try this way to... More, after install HSPL over it still was have 170-180 MB...
But when i install new radio 2.15.50.14, immediately have only 50MB
Click to expand...
Click to collapse
Using HSPL in combination of Stock Rom 3.14 gives you limitation of program memory; bad reception, and also bad reception on WiFi.
The problem about bad reception isn't in all case, but limitation of free program memory is alway's there!
so remove your HSPL!
Rom locked O2 regular hd2, 1.66.hspl, 3.14 wwe rom extracted from the .exe, flashed using customruu.
As documented all over, flash the 3.14 rom onto a phone without spl3 and you show a much reduced Program memory. (RAM) Around 50MB free, running stock.
So i had decided to ignore 3.14 till hspl caught up,. or O2 released a rom, but boredom overcame me and i figured I'd have a look.
My main finding, and i was surprised I hadn't read it yet, was that flashing a ..51.. radio sorts out the free ram issue.
Yes you are down to 448 total ram, but the free ram is no longer 50 mb, around 160 - 180(sorry forgot to write it down,). Lose 128 meg to gain 128 meg, fair enough.
Reception and general connectivity seemed OK, but i didn't really put it under any real tests. wifi on, a few short test calls.(update, , forget that, i've flashed around 20 times tonight, playing with various combinations of 3.14 roms and spls and radios, and about half the time the calls are crackly or silent with a 51 radio, whilst the rest of the time it works fine.)
Anyway, i played with that for a bit, then thought i'd have a play with the rom in a kitchen, see if i couldn't unlock the ram, try the nk.exe from the tmous 3.14, just to see what happened, etcetera, and i ended up staring at a bootloader screen that said ''wrong platform'' on the microP line and it scared me so much i deleted the kitchen completely, went back to my custom 2.13 rom, and i'm not touching 3.14 again till the o2 rom arrives.
FYI
Found a post here about the 3.14 ROM. Seems like if you flash it from the SD card, and then reflash HSPL3, you will be OK......Maybe. FYI
http://www.htchd2forum.com/android-on-the-hd2/froyostone-doesnt-work/5/?wap2
iarapilot said:
Found a post here about the 3.14 ROM. Seems like if you flash it from the SD card, and then reflash HSPL3, you will be OK......Maybe. FYI
http://www.htchd2forum.com/android-on-the-hd2/froyostone-doesnt-work/5/?wap2
Click to expand...
Click to collapse
except the sd flash would put spl3 on the phone and so no version of hspl can be put back on since they don't support spl3.
I am confused. Need help , Thanks
Hi, After reading the threads on ROM upgrades now I am confused if I can upgrade my HD2 having Telstra ROM with Artemis HD2 v40.0. (thread 612580)
I am looking at removing the Telstra brand stuff and put the latest build without any telco branding..
My ROM version is 1.49.841.1 (71528) WWE
Radio Version 2.05.51.11
Protocol Version 15.28.50.07U
Manila Version 1.0.19211622.1
OS Version 5.2.21869 (21869.5.0.82)
I have seen different methods of upgrade. That confused me again. which is the right one my phone.
"1. Remove SD
2. Remove HSPL with HSPL2_RUN.exe (flash SPL 1.66.0000 with HSPL2_RUN.exe)
3. PowerOff the phone
4. Boot to bootloader (VolDown+PowerOn) and when it shows "USB" flash stock ROM by running matching RUU_Leo_S_HTC_XXX_3.14.XXX_Radio_15.42.50.11U_2.15 .50.14_LEO_S_Ship.exe (get yours HERE)
5. Hard Reset (when phone starts booting after step 4, remove the battery, insert it back press VolUp+VolDown and still holding both press PowerOn and follow the instructions)
6. Boot to homescreen.
7. Run SSPL_RUU.exe with Artemis v40 RUU_Signed_0409.nbh in the same folder - YOU HAVE TO BE ON HOME SCREEN, NOT BOOTLOADER (this took me 3 tries until succeded - yes - nerve wrecking, but works). If it doesn't work (hangs on black screen for more than 2min or stays at 0%) remove the battery and try again. If still doesn't work - try solutions in NOTE below.
8. Hard reset (instructions in step 5)
9. when on homescreen - softreset."
Looked at the thread (26465) from which I copied the instructions above. As per the comment I wont be able to upgrade. Is that correct?
Also if I upgrade the radio will that cause any trouble? Or is the radio upgrade not necesary,
Thanks very much for helping.
Sir this will not work on a Telstra ROM!!
There isn't a 3.14.841.x Stock Rom available!!
Don't install stock rom over SD on your device if it isn't create for!
There are two way's to do:
- Waiting for a available Stock Rom 3.14.841.x ore a compatible HSPL version.
- Ore using the GoldCard technique.
praveen_gec said:
Hi, After reading the threads on ROM upgrades now I am confused if I can upgrade my HD2 having Telstra ROM with Artemis HD2 v40.0. (thread 612580)
My ROM version is 1.49.841.1 (71528) WWE
Radio Version 2.05.51.11
Protocol Version 15.28.50.07U
Manila Version 1.0.19211622.1
OS Version 5.2.21869 (21869.5.0.82)
I have seen different methods of upgrade. That confused me again. which is the right one my phone.
"1. Remove SD
2. Remove HSPL with HSPL2_RUN.exe (flash SPL 1.66.0000 with HSPL2_RUN.exe)
3. PowerOff the phone
4. Boot to bootloader (VolDown+PowerOn) and when it shows "USB" flash stock ROM by running matching RUU_Leo_S_HTC_XXX_3.14.XXX_Radio_15.42.50.11U_2.15 .50.14_LEO_S_Ship.exe (get yours HERE)
5. Hard Reset (when phone starts booting after step 4, remove the battery, insert it back press VolUp+VolDown and still holding both press PowerOn and follow the instructions)
6. Boot to homescreen.
7. Run SSPL_RUU.exe with Artemis v40 RUU_Signed_0409.nbh in the same folder - YOU HAVE TO BE ON HOME SCREEN, NOT BOOTLOADER (this took me 3 tries until succeded - yes - nerve wrecking, but works). If it doesn't work (hangs on black screen for more than 2min or stays at 0%) remove the battery and try again. If still doesn't work - try solutions in NOTE below.
8. Hard reset (instructions in step 5)
9. when on homescreen - softreset."
Looked at the thread (26465) from which I copied the instructions above. As per the comment I wont be able to upgrade. Is that correct?
Also if I upgrade the radio will that cause any trouble? Or is the radio upgrade not necesary,
Thanks very much for helping.
Click to expand...
Click to collapse
kurt-willems said:
Sir this will not work on a Telstra ROM!!
There isn't a 3.14.841.x Stock Rom available!!
Don't install stock rom over SD on your device if it isn't create for!
There are two way's to do:
- Waiting for a available Stock Rom 3.14.841.x ore a compatible HSPL version.
- Ore using the GoldCard technique.
Click to expand...
Click to collapse
Thanks for the quick reply. I will start reading the Gold Card technique. But thought of asking if there is any disadvantage to this? or is it just like the normal upgrade and it will let me upgrade in the future again..
Hello,
I have tried absolutely everything I know and that I have read. 3 different micro sd cards and 2 card readers. I actually bought a Kingston card and kingston card reader because I read kingston works fine for goldcard. I am desperate for fixing this.
There is no way I can get passed the loading screen after rebooting the phone in usb host mode. This are the steps I follow.
My phone at&t Titan pi39100
1. Create goldcard using a 2gb kingston.
1.1 Format the card in Fat32
1.2 Apply the goldcard tool
1.3 Copy the eterimg.nhb file that comes in the file provided by Cotulla for the SPL. (25 mb) ( I have actually tried inverting the order of steps 1.2 and 1.3 just for the sake of trying)
2. Prepare the Y cable as you can see in the pictures attached and reboot the phone and try to flash the SPL. Pressing power, vol - and camera. It gets in to the usb host mode and then a loading screen appears for a few seconds. Next thing I see is the spl screen reading
PI39100 MFG
SPL-2.5 160015.3 (137079)
eMMC SND 15188MB
TOUCH A1 (F:81, ID:1, V11, B:F8)
RADIO- 16.23.02.26_A
Now, I have noticed that if after this I try to flash the hspl I get the congratulations message, but my phone has not changed at all and I cannot flash any custom rom.
I read somewhere that the MFG may be a type of SPL that is impossible to flash, Can someone please confirm that I am not missing any step that that there is just no hope for my phone?
I have spent hours and hours reading and trying with this. I had the hope that some of the problems I have with the phone will be fixed with a Custom Rom, but if I can't flash it, I think I'm getting rid of the phone. I see lots of potential with the windows phone but my personal experience has been terrible
If someone can help I would be totally thankful.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
andres22 said:
Hello,
I have tried absolutely everything I know and that I have read. 3 different micro sd cards and 2 card readers. I actually bought a Kingston card and kingston card reader because I read kingston works fine for goldcard. I am desperate for fixing this.
There is no way I can get passed the loading screen after rebooting the phone in usb host mode. This are the steps I follow.
My phone at&t Titan pi39100
1. Create goldcard using a 2gb kingston.
1.1 Format the card in Fat32
1.2 Apply the goldcard tool
1.3 Copy the eterimg.nhb file that comes in the file provided by Cotulla for the SPL. (25 mb) ( I have actually tried inverting the order of steps 1.2 and 1.3 just for the sake of trying)
2. Prepare the Y cable as you can see in the pictures attached and reboot the phone and try to flash the SPL. Pressing power, vol - and camera. It gets in to the usb host mode and then a loading screen appears for a few seconds. Next thing I see is the spl screen reading
PI39100 MFG
SPL-2.5 160015.3 (137079)
eMMC SND 15188MB
TOUCH A1 (F:81, ID:1, V11, B:F8)
RADIO- 16.23.02.26_A
Now, I have noticed that if after this I try to flash the hspl I get the congratulations message, but my phone has not changed at all and I cannot flash any custom rom.
I read somewhere that the MFG may be a type of SPL that is impossible to flash, Can someone please confirm that I am not missing any step that that there is just no hope for my phone?
I have spent hours and hours reading and trying with this. I had the hope that some of the problems I have with the phone will be fixed with a Custom Rom, but if I can't flash it, I think I'm getting rid of the phone. I see lots of potential with the windows phone but my personal experience has been terrible
If someone can help I would be totally thankful.
Click to expand...
Click to collapse
the AT&T Branded HTC Titan is not compatible with DFT's HSPL at the moment. Any attempt will update your SPL from 1.10 to 2.5 which is locked to the phone. Only Rom that is flashable is the Stock AT&T image.
Last we heard from Cotulla among other HTC Titan users are testing possible issues/solution. So for the time being there is no ETA as usual and we AT&T Titan owners are stock with what we currently have.
So the best you can do is flash the stock rom and update to 8107 and patiently wait for any news from DFT/Cotulla
Hey yo...is this an ATT Titan? or an unbranded Titan? It looks like an ATT Titan...but anyway, if it is an ATT Titan, did you successfully debrand the device to the Euro Rom first?
I see Tachi has beaten me to the punch...
Yes...I think we need to tell Cotulla or DFT to put a warning to ATT users who want to try this on the direction page.
IT IS AN ABSOLUTE MUST FOR AT&T TITANS THAT IN ORDER TO INSTALL THE DFT SPL/HSPL - YOU MUST FIRST DEBRAND YOUR DEVICE TO A EURO ROM! - lol -- However, I hear that soon ATT users will be getting some updates along with the 2.5 SPL...so this may be only temporary.
Try to flash back to the original ATT rom and see if the SPL will return back to 1.10. If it doesn't...be patient...they are working on a fix for this.
the AT&T Branded HTC Titan is not compatible with DFT's HSPL at the moment. Any attempt will update your SPL from 1.10 to 2.5 which is locked to the phone. Only Rom that is flashable is the Stock AT&T image.
Last we heard from Cotulla among other HTC Titan users are testing possible issues/solution. So for the time being there is no ETA as usual and we AT&T Titan owners are stock with what we currently have.
So the best you can do is flash the stock rom and update to 8107 and patiently wait for any news from DFT/Cotulla
Click to expand...
Click to collapse
Hi Tachi91, Yes I updated to 8107. I guess it is all I can do for now. Thanks for your answer!
Hey yo...is this an ATT Titan? or an unbranded Titan? It looks like an ATT Titan...but anyway, if it is an ATT Titan, did you successfully debrand the device to the Euro Rom first?
I see Tachi has beaten me to the punch...
Yes...I think we need to tell Cotulla or DFT to put a warning to ATT users who want to try this on the direction page.
IT IS AN ABSOLUTE MUST FOR AT&T TITANS THAT IN ORDER TO INSTALL THE DFT SPL/HSPL - YOU MUST FIRST DEBRAND YOUR DEVICE TO A EURO ROM! - lol -- However, I hear that soon ATT users will be getting some updates along with the 2.5 SPL...so this may be only temporary.
Try to flash back to the original ATT rom and see if the SPL will return back to 1.10. If it doesn't...be patient...they are working on a fix for this.
Today 09:02 PM
Click to expand...
Click to collapse
I cant go back to 1.10 I am stuck at 2.5 no matter what I do. I tried to debrand to a Euro Rom with no success either, this is actually what had me confused cause I could read some post from AT&T users confirming that they had flashed the DFT HSPL.
Well I will keep waiting. I agree with you that a warning for AT&T usera at the beginning of the post would be helpful.
Thanks a lot to both of you. At least I can sleep tonight knowing I it's not that I am missing some evident step.
AT&T sucks their policy is an abuse of power (to the eyes of a European) There are lots of things I miss from the US and I am looking forward to go back, but my phone carrier is not one of them
P.S. I can't make backups of the phone with Zune either, it give me an error and neither the patch from htc or the solution from microsoft work. Just sharing it in case it helps someone.
xconomicron said:
Hey yo...is this an ATT Titan? or an unbranded Titan? It looks like an ATT Titan...but anyway, if it is an ATT Titan, did you successfully debrand the device to the Euro Rom first?
I see Tachi has beaten me to the punch...
Yes...I think we need to tell Cotulla or DFT to put a warning to ATT users who want to try this on the direction page.
IT IS AN ABSOLUTE MUST FOR AT&T TITANS THAT IN ORDER TO INSTALL THE DFT SPL/HSPL - YOU MUST FIRST DEBRAND YOUR DEVICE TO A EURO ROM! - lol -- However, I hear that soon ATT users will be getting some updates along with the 2.5 SPL...so this may be only temporary.
Try to flash back to the original ATT rom and see if the SPL will return back to 1.10. If it doesn't...be patient...they are working on a fix for this.
Click to expand...
Click to collapse
I have Bootloader version: 1.10. What does this mean? I can debrand my at&t titan without goldcard method?
Strangely, I also have internet sharing on my AT&T titan.
zup2sky said:
I have Bootloader version: 1.10. What does this mean? I can debrand my at&t titan without goldcard method?
Thanks
Click to expand...
Click to collapse
NO!
Flash the European ROM so that your titan can be debranded. If you attempt to DFT unlock now you will be stuck like the rest of us
Tachi91 said:
NO!
Flash the European ROM so that your titan can be debranded. If you attempt to DFT unlock now you will be stuck like the rest of us
Click to expand...
Click to collapse
Somewhere in the forum, you must use GOLDCARD method to debrand- does this applies to me as well? I bought the AT&T Titan used- the previous owner somehow has internet-sharing option under the settings.
zup2sky said:
Somewhere in the forum, you must use GOLDCARD method to debrand- does this applies to me as well? I bought the AT&T Titan used- the previous owner somehow has internet-sharing option under the settings.
Click to expand...
Click to collapse
Yes you need a goldcard to debrand the titan. To get internet sharing under settings the previous owner must have updated to 8107 since thats how i got that under settings as well. So you can check under "About" and if you have anything other then 7720 under "OS Version" that means they used the cabsender.
Tachi91 said:
Yes you need a goldcard to debrand the titan. To get internet sharing under settings the previous owner must have updated to 8107 since thats how i got that under settings as well. So you can check under "About" and if you have anything other then 7720 under "OS Version" that means they used the cabsender.
Click to expand...
Click to collapse
I have 7.10.7720.68 - So by your logic, he did not use 'cabsender.'
I wonder how he got internet sharing there- can this phone be possibly unlocked?
zup2sky said:
I have 7.10.7720.68 - So by your logic, he did not use 'cabsender.'
I wonder how he got internet sharing there- can this phone be possibly unlocked?
Click to expand...
Click to collapse
If by unlock you mean full on Interop DFT unlock then yes if you have SPL 1.10
Those who have had success using DFT unlock had previously used a Goldcard to flash a European ROM. The issue we are having is that if you attemp to flash DFT unlock with SPL 1.10 to get stuck.
So if you want custom roms it will be smart to first flash a European ROM (2.05) using the goldcard. Once you are runnig the unbranded 8107 rom then start the DFT unlock process
No problem andres22,
haha, And yes, I would agree...as would most-all AT&T users too.
zup2sky said:
Somewhere in the forum, you must use GOLDCARD method to debrand- does this applies to me as well? I bought the AT&T Titan used- the previous owner somehow has internet-sharing option under the settings.
Click to expand...
Click to collapse
All the AT&T Titan I believe, had the Internet Sharing in the stock Rom. I got 2 Titan last November with 7720 ROM with it.
Just want to let everyone in this thread know;
I see claims that debranding must be done and guarantees success...
There has been no quantitative proof that debranding does anything. The success stories are the loudest, of course, and more and more threads keep popping up where users are saying "if only I debranded I wouldn't be stuck on SPL 2.05!"
Having met with success after debranding doesn't prove anything. I didn't debrand and I got my Titan to HSPL, admittedly it was a lengthy and unnerving process. I don't think that debranding does anything, I don't think it even logically CAN do anything, but what I do know is that the AT&T titan is not "not supported", as was claimed in one of the first posts. It was supported, but I'd say half (or less than half, again, loudest of the bunch) of users are having issues with at least two parts of the process, and DFT is looking into it.
I guess I should get off my ass and see if I can unstick the SPL on my second titan.
link68759 said:
Just want to let everyone in this thread know;
I see claims that debranding must be done and guarantees success...
There has been no quantitative proof that debranding does anything. The success stories are the loudest, of course, and more and more threads keep popping up where users are saying "if only I debranded I wouldn't be stuck on SPL 2.05!"
Having met with success after debranding doesn't prove anything. I didn't debrand and I got my Titan to HSPL, admittedly it was a lengthy and unnerving process. I don't think that debranding does anything, I don't think it even logically CAN do anything, but what I do know is that the AT&T titan is not "not supported", as was claimed in one of the first posts. It was supported, but I'd say half (or less than half, again, loudest of the bunch) of users are having issues with at least two parts of the process, and DFT is looking into it.
I guess I should get off my ass and see if I can unstick the SPL on my second titan.
Click to expand...
Click to collapse
If your claim is true- this changes everything.
Care to elaborate how you obtained HSPL on your titan? I am sure at&t titan owners are eager to know
Well I have two AT&T Titans, because I thought I half bricked my first one with the f400 error. Then I f400'd the second Titan.
I went back to work on my original Titan, I got rid of the f400 error and I THINK I was stuck on SPL 2.05, HSPL wouldn't install even though it said success. Some combination of hard resetting and flashing the stock ROM brought me back to SPL 2.10, from there I flashed 2.05 again and then HSPL worked.
I have spent significantly less time trying to HSPL my second Titan, but for what it's worth I have been unable to duplicate whatever I did to my first Titan in my half hour of tinkering with it. Stuck on 2.05.
(I think I spent no less than 20 hours on my first Titan, though most of that was because goldcard wasn't working with all but one of my USB devices.
Stuck at spl screen with 2.05 spl
link68759 said:
well i have two at&t titans, because i thought i half bricked my first one with the f400 error. Then i f400'd the second titan.
I went back to work on my original titan, i got rid of the f400 error and i think i was stuck on spl 2.05, hspl wouldn't install even though it said success. Some combination of hard resetting and flashing the stock rom brought me back to spl 2.10, from there i flashed 2.05 again and then hspl worked.
I have spent significantly less time trying to hspl my second titan, but for what it's worth i have been unable to duplicate whatever i did to my first titan in my half hour of tinkering with it. Stuck on 2.05.
(i think i spent no less than 20 hours on my first titan, though most of that was because goldcard wasn't working with all but one of my usb devices.
Click to expand...
Click to collapse
can you give the link for the stock rom with spl 2.10 and did you boot the phone successfully after flashing this stock rom???? Please help i am stuck on the spl screen indefinitely and nothing is working to get my phone back to working condition...
hi im new here so go easy on me please
im trying to re-install windows mobile 6.5 on my t-mobile htc hd2 because i kinda broke my micro sd card that im using for android. the problem is i failed many times trying to flash the original rom it always stops at OS and displays the 00018002 error code...i searched every thread thats similar to my situation but it didnt help me..task 29 and toolkit couldnt help me because my computer cant recognize my phone...help me please? thanks in advance
is this a USA T-Mobile HD2 (TMOUS) ? Has green - call key & red - end key
If so look for correct TMOUS rom in HD2 wiki
http://forum.xda-developers.com/wiki/HTC_HD2#Official_ROMs_.26_Radios
Also review what HSPL you have.
If you can get it to bootloader tri-colour screen you should be able flash via PC-USB cable if have WMDC or activesync installed
Links for all above is in the wiki, do be careful if TMOUS HD2 as wrong radio version will brick it so read up on it if you not already aware of it ...
Mister B said:
is this a USA T-Mobile HD2 (TMOUS) ? Has green - call key & red - end key
If so look for correct TMOUS rom in HD2 wiki
http://forum.xda-developers.com/wiki/HTC_HD2#Official_ROMs_.26_Radios
Also review what HSPL you have.
If you can get it to bootloader tri-colour screen you should be able flash via PC-USB cable if have WMDC or activesync installed
Links for all above is in the wiki, do be careful if TMOUS HD2 as wrong radio version will brick it so read up on it if you not already aware of it ...
Click to expand...
Click to collapse
yes my phone is TMOUS...i installed HSPL4 when i installed android os on it. i installed wmdc on my laptop since it's installed on my desktop already but didnt work, went into bootloader but it didnt recognized the device...please help me
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
That screenshot says it all
1- you do not have HSPL, it gone & you on standard SPL2.08
2- ROM code error, you using wrong ROM so either get HSPL2.08 on it or use the correct TMOUS official ROM .
http://www.androidruu.com/Leo/RUU_L...adio_15.42.50.11U_2.15.50.14_LEO_1.5_Ship.exe
If unable flash via USB you will have to do it with a SD card, (borrow or buy a 2gb sd card) link below for basics on sd rom flashing
http://forum.xda-developers.com/showthread.php?t=681317
Personally I would flash a custom WM6.5 ROM such as energy reference perhaps !
http://www.mediafire.com/download/bhh47jlowm9zph6/Energy.Leo.23699.Sense2.5.Reference.Nov.24.7z
You would need a radio to go with the custom ROM as they do not include radio & one in My signature would be safe good option to start with.
** all linked ROMs/Radios in this post are TMOUS HD2 safe, if you use other ROM sources be sure you know they TMOUS suitable or your device will end up dead **
Mister B said:
That screenshot says it all
1- you do not have HSPL, it gone & you on standard SPL2.08
2- ROM code error, you using wrong ROM so either get HSPL2.08 on it or use the correct TMOUS official ROM .
http://www.androidruu.com/Leo/RUU_L...adio_15.42.50.11U_2.15.50.14_LEO_1.5_Ship.exe
If unable flash via USB you will have to do it with a SD card, (borrow or buy a 2gb sd card) link below for basics on sd rom flashing
http://forum.xda-developers.com/showthread.php?t=681317
Personally I would flash a custom WM6.5 ROM such as energy reference perhaps !
http://www.mediafire.com/download/bhh47jlowm9zph6/Energy.Leo.23699.Sense2.5.Reference.Nov.24.7z
You would need a radio to go with the custom ROM as they do not include radio & one in My signature would be safe good option to start with.
** all linked ROMs/Radios in this post are TMOUS HD2 safe, if you use other ROM sources be sure you know they TMOUS suitable or your device will end up dead **
Click to expand...
Click to collapse
yeah it reverted back to its old spl because i've been flashing zelendel's copy of rom (didnt work)..now DLng the rom you gave me..will be back and hoping it'll work..thanks
finally! i managed to revert it back to windows mobile all i did was install HSPL3 (no roms needed), rebooted and booted without any errors all i needed was my laptop with newly installed wmdc (for some reason my desktop which also has wmdc didnt work, rlly have to re-install on that one)
now i have find an android rom that unlocks the hidden ram of my htc hd2 or will just stay as windows...
btw can u recommend good ROMs you know? thanks
trancer1 said:
finally! i managed to revert it back to windows mobile all i did was install HSPL3 (no roms needed), rebooted and booted without any errors all i needed was my laptop with newly installed wmdc (for some reason my desktop which also has wmdc didnt work, rlly have to re-install on that one)
now i have find an android rom that unlocks the hidden ram of my htc hd2 or will just stay as windows...
btw can u recommend good ROMs you know? thanks
Click to expand...
Click to collapse
I only use WM6.5.5 as really not a big fan of Android as very messy OS .
Best custom 6.5.5 ROMs are all linked in wiki & my current one is as in my signature.
with the best apps of WM & good tweaking WM is super solid & usable.
Note taken. Maybe ill just stick with windows for now. I might get my cousin's old phone though im not sure if they are willing to give it away haha. Anyways thanks for all of your help.
Sent from my Nexus 7 using XDA Free mobile app
Hi guys looking a little help please!
I have an 02 UK HD2 I want to revert back to windows mobile but I cant find a live link to the original rom...what are my options?
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
CotullaHSPL 0x05 0x30
Thank you
robs1971 said:
Hi guys looking a little help please!
I have an 02 UK HD2 I want to revert back to windows mobile but I cant find a live link to the original rom...what are my options?
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
CotullaHSPL 0x05 0x30
Thank you
Click to expand...
Click to collapse
HD2 Wiki >
http://forum.xda-developers.com/wiki/HTC_HD2#Official_ROMs_.26_Radios
http://www.androidruu.com/Leo/
http://www.androidruu.com/Leo/RUU_L..._Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe
Mister B said:
HD2 Wiki >
http://forum.xda-developers.com/wiki...OMs_.26_Radios
http://www.androidruu.com/Leo/
http://www.androidruu.com/Leo/RUU_Le...LEO_S_Ship.exe
Click to expand...
Click to collapse
Really appreciate your help but links 1 and 3 are dead
robs1971 said:
Really appreciate your help but links 1 and 3 are dead
Click to expand...
Click to collapse
Sorry 4 that.
Seems long links got broken by post auto url function.
1 is now work
3 is correct but if does not work as direct link you will need use link 2 to veiw all the HD2 ROMs & select the O2 rom for working link (tested & available/working.