Related
Taken from Alltel ROM: HTC PPC6800 WM6.1 / LBS Update – Version 3.52.671.9
http://www.htc.com/us/SupportDownload.aspx?p_id=63&cat=2&dl_id=114
Before anyone asks WHY I am posting this, I am posting it because I have been unable to find this myself, as only having seen the 3.42.50 radio ported over from the Vogue.
So once more, this is an OFFICIAL radio for the Titan version 3.42.50, which was released with the Alltel PPC6800 update v3.52.671.9
Downloads moved to: http://www.4shared.com/dir/13348483/9d4d857d/sharing.html
file is named Titan_Radio_ROM_3.42.50-Alltel.exe
Any questions, or comments are welcome.
Interesting find, thanks. Do you see any difference with this radio?
I haven't really noticed much of a difference.
Everything works as it should, and where I'm at, I always have full signal strength, so I'm not a good person to be judging this.
Hopefully someone else can let you know.
Also, post your results here.
Edit: I am seeing 6~8 satellites with the GPS, which was an improvement, but I'm not using the PDE servers as it requires data and I'm not using a data plan.
scrawnyb said:
....having seen the 3.42.50 radio ported over from the Vogue.
Click to expand...
Click to collapse
I'm curious will this radio work for Sprint? DCD has posted all the radios for the Titan but I'm not sure if his was a port from Vogue or not.
DCD Radios
Comparing the two radios this is what I see using NBHextract:
C:\Test>nbhextract TITAIMG.nbh [DCD's radio 3.42.50]
=== NBHextract v1.0
=== Extract contents from HTC NBH files
=== (c)2007 xda-developers.com
=== by: pof & TheBlasphemer based on itsme perl scripts
Device: TITA10000
CID: HTC__001
Version: 3.42.50
Language: USA
Extracting: 00_GSM.nb
Alltel Radio:
C:\Test>nbhextract 3.42.50_alltel.nbh
=== NBHextract v1.0
=== Extract contents from HTC NBH files
=== (c)2007 xda-developers.com
=== by: pof & TheBlasphemer based on itsme perl scripts
Device: TITA10000
CID: SuperCID
Version: 1.98.3
Language: WWE
Extracting: 00_GSM.nb
Any guesses?
I installed it on my Sprint mogul. So far its good. I don'tt see anything new with this radio.
moblues said:
I'm curious will this radio work for Sprint? DCD has posted all the radios for the Titan but I'm not sure if his was a port from Vogue or not.\
Click to expand...
Click to collapse
It will work fine on Sprint. I'm running it on Verizon.
When I say Alltel, it was stripped from the Alltel ROM, but it is compatible for all Titan devices.
DCD's release was ported over from the Vogue device, and hence the only reason why I'm releasing this official one, as this one was MADE for the Titan.
It is indeed radio 3.42.50, I forgot to change it in the NBH file, but it won't affect anything.
I've been running it on Sprint after getting it from the Alltel stock ROM flash. Works just fine. No issues.
moblues said:
I'm curious will this radio work for Sprint?
Click to expand...
Click to collapse
Radios are not carrier specific, only device specific... this will work with any carrier who has the titan.
do i have to use SD card to flash this radio? i have spl 2.40 and it didnt work for me.
You can use SD card. Just unzip the file in first link to root of SD card. Some times it take few tries to go into bootloader for it to find the file.
polobreaka said:
do i have to use SD card to flash this radio? i have spl 2.40 and it didnt work for me.
Click to expand...
Click to collapse
Flagmax said:
You can use SD card. Just unzip the file in first link to root of SD card. Some times it take few tries to go into bootloader for it to find the file.
Click to expand...
Click to collapse
Make sure it's no more than 2 gb and isn't an hcsd card, won't work otherwise
scrawnyb said:
It will work fine on Sprint. I'm running it on Verizon.
When I say Alltel, it was stripped from the Alltel ROM, but it is compatible for all Titan devices.
DCD's release was ported over from the Vogue device, and hence the only reason why I'm releasing this official one, as this one was MADE for the Titan.
It is indeed radio 3.42.50, I forgot to change it in the NBH file, but it won't affect anything.
Click to expand...
Click to collapse
Ahhhh.... yeah, cause the version is the only thing that worried me. DCD's 3.42.50 has been terrible for me so I wanted to make sure. I'll flash now and see. Thanks for pulling that radio out of Alltel!
I upgraded to this rom... had problems getting to to load.. but once I did..... it installed...
now I dont have a data plan so I really havent seen any benefit to the new radio... Although today I had 9/9 sats... and carried it into work.... and got to my desk and still had 4/9 sats.... THAT IS IMPRESSIVE FOR ME!!!!!
I usually loose signal inside work...
now on the startup time.. with no data plan and no towers to bank off of... usually it takes 1-3 minutes to sync.... but today it took about 10 seconds!!!! not sure what the difference is so far but I like it...
now im reading up on the roms... I see a lite version.... OOOOHHHHHH ME LIKES!!!!
GPS problems
Hey
I'm using this 3.42.50 radio with scrosler's ROM(see sig). I'm having trouble locking in GPS satelites using Google maps. I'm on sprint and can't do the GPS fix. Is there anything else I can do to increase my satelite locking ability?
The RUU keeps telling me that I can't use this update utility with this device.
Do I need to downgrade existing radio somehow first?
I've been using DCD's 2.42.50 radio for several months now on my Alltel Titan (also running his 3.3.4 ROM w/Manilla 2D). Never had any problem with it at all. Worked perfectly for me from day one. GPS working flawlessly with it, I see no need to "update"...
MetalHd said:
The RUU keeps telling me that I can't use this update utility with this device.
Do I need to downgrade existing radio somehow first?
Click to expand...
Click to collapse
If you are flashing thru RUU on a 3.x radio, you have to downgrade the SPL to I believe (double check before trying) to 1.2, however it is much easier and much preferred to flash via SD card for more accurate flashing. Any time you flash via cable you take that chance of the cable coming loose, PC losing power, etc. Any of which could brick the phone. Roms are safer to flash via cable since you don't have to downgrade/upgrade to do it. And can usually be recovered from by just reflashing. I know from experience as this happened to me. Not so sure about the radio since it provides so much function for the phone.
I recommend going and picking up a 512mb or 1gb card, they are dirt cheap and provide a safer flashing option.
BTC
what is the different between DCAAXAM-4350H and DCAAXOM-4350H?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
agismaniax said:
what is the different between DCAAXAM-4350H and DCAAXOM-4350H?
Click to expand...
Click to collapse
I believe the post you read that made you paranoid was from some guy in my thread.. I am using the Radio he claims only works on 1X yet I have EVDO all day which is DCAAXOM-4350H.. Dont let peoples useless muttering keep you from trying things out.
sheeze... DCD's site is down (at least for me), and all other links to Radios/SPL's are dead... FML...
Htc hd2 white screen, i have hardreset but still same,
after i put bootloder mode @ tryed with this three fw
_HTC_HD2_RUU_Leo_hTC_Asia_WWE_1.66.707.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
-HTC HD2-
RUU_Leo_HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
stoke on 0%
also tryed by micro sd cant sucsess load rom
here my device info puting on bootloder mode
PB81100 Hx-BC
Spl-1.42.0000 Xe
Microp(Led) 0X05
Microp(touch) 0x03
any urgent luck ??
First....read the tutorial about flashing ROMs!
Second....read again the tutorial and learn about compatible Radio ROMs!
And before flashing use the HSPL2. Its more flexible and from your post I think you didnt HSPL-ed first.
After reading them again....download a custom ROM and try to use a radio containing 2.0x.50.xx . Try 2.08.50.05!
viperd said:
First....read the tutorial about flashing ROMs!
Second....read again the tutorial and learn about compatible Radio ROMs!
And before flashing use the HSPL2. Its more flexible and from your post I think you didnt HSPL-ed first.
After reading them again....download a custom ROM and try to use a radio containing 2.0x.50.xx . Try 2.08.50.05!
Click to expand...
Click to collapse
phone was runing, the customer said after battery remove this happen
i got this condition,
any way can u shara a link custom ROM radio containing 2.08.50.05.
Regards
There are 2 separate things!
Most custom ROMs DO NOT include a Radio ROM!
1.flash HSPL from here http://forum.xda-developers.com/showthread.php?t=611433
2. Get this small app from here http://forum.xda-developers.com/showpost.php?p=5848003&postcount=19 Unzip it, put your phone into bootloader and run the small up! Its formatting the space for your new ROM!
2. Get one radio from here http://www.vbnfiles.com/xda/HTC HD2 (Leo)/Radios/ Try to use 2.08.50.05! Flash Radio ROM
3.Get one custom ROM from here http://hotfile.com/dl/38594525/8225204/Energy.Leo.21899.Sense2.5.Cookie.HomeTab.Apr.18.7z.html 21899 version will work better for you
P.S. Always try to flash when you are in bootloader mode! Dont Flash when phone is already in use!
::.::RAMJAN::.:: said:
Htc hd2 white screen, i have hardreset but still same,
after i put bootloder mode @ tryed with this three fw
_HTC_HD2_RUU_Leo_hTC_Asia_WWE_1.66.707.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
-HTC HD2-
RUU_Leo_HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
stoke on 0%
also tryed by micro sd cant sucsess load rom
here my device info puting on bootloder mode
PB81100 Hx-BC
Spl-1.42.0000 Xe
Microp(Led) 0X05
Microp(touch) 0x03
any urgent luck ??
Click to expand...
Click to collapse
Incorrect radio. Find out from chef which radio suits best, Restore to stock from sd and flash radio frist, then customer rom.
Did you install HSPL?
wickedpenguin said:
Incorrect radio. Find out from chef which radio suits best, Restore to stock from sd and flash radio frist, then customer rom.
Did you install HSPL?
Click to expand...
Click to collapse
Guy's i got the phone white screen mode, so dont know it was hspl or not
::.::RAMJAN::.:: said:
Guy's i got the phone white screen mode, so dont know it was hspl or not
Click to expand...
Click to collapse
Jeez......if you don't know if it whas Hspl or spl,it is defenitly spl!
You need Hspl before flashing a custom rom,also a compatible radio.
All in this tutorial: http://forum.xda-developers.com/showthread.php?t=609477
I also told you about HSPL! Why dont you take those steps in order to solve your problem ? Its clear that you didnt use HSPL because your bootloader should also display Cottula....
viperd said:
I also told you about HSPL! Why dont you take those steps in order to solve your problem ? Its clear that you didnt use HSPL because your bootloader should also display Cottula....
Click to expand...
Click to collapse
i tryd with hspl before make this thread wont get any happen
Take out the battery...insert it back in! Press Volume Down ( side button ) and while pressing it....press Power On button! It will enter the bootloader! Connect your phone via USB cable ( Windows Mobile Device Center for Windows Vista/ 7 ) and then run HSPL 2. Try 2.08 HSPL ( Ive heard its more versatile ).
must....resist......urge.....to....FLAME!!!
@djchubbs : I know Keep your horses packed! ) NRGZ thread is full of this, but I remember when it happened to me on a Kaiser... and I got all kinds of informations in a shortwhile ....didnt know what to do!
viperd said:
Take out the battery...insert it back in! Press Volume Down ( side button ) and while pressing it....press Power On button! It will enter the bootloader! Connect your phone via USB cable ( Windows Mobile Device Center for Windows Vista/ 7 ) and then run HSPL 2. Try 2.08 HSPL ( Ive heard its more versatile ).
Click to expand...
Click to collapse
look this pic what error i got
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
viperd said:
@djchubbs : I know Keep your horses packed! ) NRGZ thread is full of this, but I remember when it happened to me on a Kaiser... and I got all kinds of informations in a shortwhile ....didnt know what to do!
Click to expand...
Click to collapse
problem solved, thx
but now every restart my hd2 goes white screen hang,
Now flash a radio ROM! Download a radio and use it, before flashing a custom ROM! Enter bootloader again and flash it!
More than this....use that small up http://forum.xda-developers.com/showthread.php?t=644781 every time before flashing a new ROM!
The normal steps are
1.Mtty(task 29) provided by the small app above
2. Flash Radio ROM ( but be very careful about the compatibility )
3. Flash Custom ROM ( in accordance with the Radio flashed previously )
4. Hard reset always after first boot
viperd said:
Now flash a radio ROM! Download a radio and use it, before flashing a custom ROM! Enter bootloader again and flash it!
More than this....use that small up http://forum.xda-developers.com/showthread.php?t=644781 every time before flashing a new ROM!
now white screen again cant do anyting, i got error on hspl2
CRITICAL ERROR FLOW:00000006 ERROR CODE:00000014 DESCRIPTION: unknown
Click to expand...
Click to collapse
::.::RAMJAN::.:: said:
viperd said:
Now flash a radio ROM! Download a radio and use it, before flashing a custom ROM! Enter bootloader again and flash it!
More than this....use that small up http://forum.xda-developers.com/showthread.php?t=644781 every time before flashing a new ROM!
now white screen again cant do anyting, i got error on hspl2
CRITICAL ERROR FLOW:00000006 ERROR CODE:00000014 DESCRIPTION: unknown
Click to expand...
Click to collapse
Try HSPL with a 1.48 rom+ radio 2.08.50.02
Again:
1) Run HSPL, when it gets 100% and your phone screen is black, just press volume down button until you enter the 3- color screen.
2) Unzip this and run the file named Task29 (the radio 2.08.50.02 is included) and again, when the screen goes black, press volume down until the 3-color screen and
3) Choose a custom rom base 2.10 (it's important that you use a 2.10 base rom only), like NRGZ, Xannytech, RTT, LIA Glass series, Touch X-Trem, etc. Flash the rom, and you should appear in your thread again only to thank everybody, although you don't have to because as a community, we help members (I personaly take it as a duty).
Good luck!
Click to expand...
Click to collapse
forelli said:
::.::RAMJAN::.:: said:
Try HSPL with a 1.48 rom+ radio 2.08.50.02
Good luck!
Click to expand...
Click to collapse
please shara a link
Click to expand...
Click to collapse
::.::RAMJAN::.:: said:
forelli said:
please shara a link
Click to expand...
Click to collapse
Second thread from the top, when you're in HD2 Rom Development, in other words [HSPL/HSPL2] HowTo flash everything . I guarantee you, you can't miss it!
I'm not responsible if you brick your phone!
I have to write it because I have the feeling that you don't collect enough information before flashing and only ask for a fast way, which may end in a bricked phone. We gave you advice on how to do it, but just do the way we did: READ READ READ and yeah, READ AGAIN. Ask others, they'll tell you the same: you never have enough information!
Click to expand...
Click to collapse
forelli said:
::.::RAMJAN::.:: said:
Second thread from the top, when you're in HD2 Rom Development, in other words [HSPL/HSPL2] HowTo flash everything . I guarantee you, you can't miss it!
I'm not responsible if you brick your phone!
I have to write it because I have the feeling that you don't collect enough information before flashing and only ask for a fast way, which may end in a bricked phone. We gave you advice on how to do it, but just do the way we did: READ READ READ and yeah, READ AGAIN. Ask others, they'll tell you the same: you never have enough information!
Click to expand...
Click to collapse
Man i got this error when to do with HSPL,
i read a lot
the device info
PB81100 Hx-BC
Spl-1.42.0000 Xe
Microp(Led) 0X05
Microp(touch) 0x03
Click to expand...
Click to collapse
ok guys, I have honestly read a s*#t load of threads regarding the installation of this ROM.
I cannot make sense of all the back and forth.
Is it possible to get an idiots simple step by step guide?
I have a Telstra branded HD2, and have 1.72 WWE ROM, with HSPL3, SPL-2.08.
What do I need to do to install the new 3.14 WWE ROM, so I do NOT get the 50Mb RAM issues? Do I need to downgrade first, flash HSPL, SPL etc etc.
Thank you in advance. I hope I can get it sorted.
hgalanos said:
ok guys, I have honestly read a s*#t load of threads regarding the installation of this ROM.
I cannot make sense of all the back and forth.
Is it possible to get an idiots simple step by step guide?
I have a Telstra branded HD2, and have 1.72 WWE ROM, with HSPL3, SPL-2.08.
What do I need to do to install the new 3.14 WWE ROM, so I do NOT get the 50Mb RAM issues? Do I need to downgrade first, flash HSPL, SPL etc etc.
Thank you in advance. I hope I can get it sorted.
Click to expand...
Click to collapse
You can't install a Telstra branded Stock rom (there isn't yet one) without using HSPL.
But using HSPL on this particular Stock rom will means you will only get +/- 50mb of program memory.
I am not after a Telstra ROM.
I have installed Official 1.72 WWE ROM, but it has the Chinese integration. Although the ROM is ok for now.
I want to upgrade to non Telstra, Official 3.14 WWE ROM, need to knwo what SPL/HSPL I need for the RAM to work.
kurt-willems said:
You can't install a Telstra branded Stock rom (there isn't yet one) without using HSPL.
But using HSPL on this particular Stock rom will means you will only get +/- 50mb of program memory.
Click to expand...
Click to collapse
Interesting.
I'm in the same boat: I'm using Hong Kong (HKSCL_WWE) 1.72.831.1 ROM with HSPL3 (2.08) on a Telstra branded HD2. I was looking at upgrading the 3.14 WWE but I was a bit unsure.
So you are saying I should either:
*. Wait for a Telstra 3.14 ROM update <- not that I would anyway, for Telstra ROM's are bloated.
or
*. Wait for a new version of HSPL which supports 3.03 SPL?
yeah, if you don't will be stock on +/- 50Mb of program memory you need to wait fore a compatible HSPL version who match with the integrated SPL 3.03!
hgalanos said:
I am not after a Telstra ROM.
I have installed Official 1.72 WWE ROM, but it has the Chinese integration. Although the ROM is ok for now.
I want to upgrade to non Telstra, Official 3.14 WWE ROM, need to knwo what SPL/HSPL I need for the RAM to work.
Click to expand...
Click to collapse
Maybe I wasn't clear the first time, but you can't upgrade a stock rom to a Telstra branded device without using HSPL (HSPL 3 2.08) But this means you only have +/- 50Mb of free program memory left.
Thanks for the clarification.
The sad part is that it does not appear to be any development in a new HSPL at the moment.
I flashed the WWE version.
Initially Bricked the phone, just like most people did. I had to reFlash using a 1.43 stock ROM to recover it.
Then, after extracting the EXE file i used CustomRUU to reflash 3.14, so no radio and no SPL flash. I got the 448MB RAM, and a super smooth rom experience. My SPL is 1.6.
I managed to upgrade the radio to 2.09.51.03_2 and still have the 448MB RAM.
Hope this helps.
toff74 said:
I flashed the WWE version.
Initially Bricked the phone, just like most people did. I had to reFlash using a 1.43 stock ROM to recover it.
Then, after extracting the EXE file i used CustomRUU to reflash 3.14, so no radio and no SPL flash. I got the 448MB RAM, and a super smooth rom experience. My SPL is 1.6.
I managed to upgrade the radio to 2.09.51.03_2 and still have the 448MB RAM.
Hope this helps.
Click to expand...
Click to collapse
Yes but how many free storage memory u have???
I think no more than 50 mb
maximus9314 said:
*. Wait for a Telstra 3.14 ROM update <- not that I would anyway, for Telstra ROM's are bloated.
or
*. Wait for a new version of HSPL which supports 3.03 SPL?
Click to expand...
Click to collapse
maximus9314 said:
Thanks for the clarification.
The sad part is that it does not appear to be any development in a new HSPL at the moment.
Click to expand...
Click to collapse
if the telstra rom comes before hspl you can use that to get spl3 and then use SSPL to flash the wwe or 3.x based cooked roms, so no need for the telstra bloat.
(at least i assume SSPL will do it,, i've not seen it confirmed, but it's the first thing i'll try when o2 spits a 3.x rom out.)
jabana said:
Yes but how many free storage memory u have???
I think no more than 50 mb
Click to expand...
Click to collapse
I have around 150MB..
SPL1.66 with the radio stated...
Here it is
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
the title of this thread sounded perfect and it started off really well but seems to have died a death.
I consider my self to be a reasonably intelligent person and computer literate. i am a vb.net programmer and oracle programmer. i bought a stock hd2, installed hspl 2.08 and have been doing every artemdes rom release since.
this new rom has me totally stumped though.
i understand i need to install the new spl and if i dont the phone will quickly resart, fail and generally mess up because i am using hspl 2.08 with a new rom (3.14) that needs the new spl 3.03. i understand that.
I understand i need to flash the rom from a memory card to get the hspl over written.
i downloaded the rom, renamed it leoimg.nbh and put the rom on the root of a freshly formatted sd card and booted into the bootloader and got nothing. prob because of my 16gb mem card. okay i got that one.
so what now are my options?
1) stick with hspl 2.08 and atemedes rom 37
2) wait for a hspl okay with 3.03 (does not look like its happening)
3) buy a new memory card and boot from that via the leo img track and hope for the best?
4) try to install hspl 2.08 again, tell it to install spl 1.66 and then install the new rom via usb?
am i correct in those? also, what happens with the radio, do i have to have a specific one installed before the flash or will the flash install the correct radio as well?
toff74 said:
I have around 150MB..
SPL1.66 with the radio stated...
Here it is
Click to expand...
Click to collapse
oh yes ofcourse, i was try this way to... More, after install HSPL over it still was have 170-180 MB...
But when i install new radio 2.15.50.14, immediately have only 50MB
jabana said:
oh yes ofcourse, i was try this way to... More, after install HSPL over it still was have 170-180 MB...
But when i install new radio 2.15.50.14, immediately have only 50MB
Click to expand...
Click to collapse
Using HSPL in combination of Stock Rom 3.14 gives you limitation of program memory; bad reception, and also bad reception on WiFi.
The problem about bad reception isn't in all case, but limitation of free program memory is alway's there!
so remove your HSPL!
Rom locked O2 regular hd2, 1.66.hspl, 3.14 wwe rom extracted from the .exe, flashed using customruu.
As documented all over, flash the 3.14 rom onto a phone without spl3 and you show a much reduced Program memory. (RAM) Around 50MB free, running stock.
So i had decided to ignore 3.14 till hspl caught up,. or O2 released a rom, but boredom overcame me and i figured I'd have a look.
My main finding, and i was surprised I hadn't read it yet, was that flashing a ..51.. radio sorts out the free ram issue.
Yes you are down to 448 total ram, but the free ram is no longer 50 mb, around 160 - 180(sorry forgot to write it down,). Lose 128 meg to gain 128 meg, fair enough.
Reception and general connectivity seemed OK, but i didn't really put it under any real tests. wifi on, a few short test calls.(update, , forget that, i've flashed around 20 times tonight, playing with various combinations of 3.14 roms and spls and radios, and about half the time the calls are crackly or silent with a 51 radio, whilst the rest of the time it works fine.)
Anyway, i played with that for a bit, then thought i'd have a play with the rom in a kitchen, see if i couldn't unlock the ram, try the nk.exe from the tmous 3.14, just to see what happened, etcetera, and i ended up staring at a bootloader screen that said ''wrong platform'' on the microP line and it scared me so much i deleted the kitchen completely, went back to my custom 2.13 rom, and i'm not touching 3.14 again till the o2 rom arrives.
FYI
Found a post here about the 3.14 ROM. Seems like if you flash it from the SD card, and then reflash HSPL3, you will be OK......Maybe. FYI
http://www.htchd2forum.com/android-on-the-hd2/froyostone-doesnt-work/5/?wap2
iarapilot said:
Found a post here about the 3.14 ROM. Seems like if you flash it from the SD card, and then reflash HSPL3, you will be OK......Maybe. FYI
http://www.htchd2forum.com/android-on-the-hd2/froyostone-doesnt-work/5/?wap2
Click to expand...
Click to collapse
except the sd flash would put spl3 on the phone and so no version of hspl can be put back on since they don't support spl3.
I am confused. Need help , Thanks
Hi, After reading the threads on ROM upgrades now I am confused if I can upgrade my HD2 having Telstra ROM with Artemis HD2 v40.0. (thread 612580)
I am looking at removing the Telstra brand stuff and put the latest build without any telco branding..
My ROM version is 1.49.841.1 (71528) WWE
Radio Version 2.05.51.11
Protocol Version 15.28.50.07U
Manila Version 1.0.19211622.1
OS Version 5.2.21869 (21869.5.0.82)
I have seen different methods of upgrade. That confused me again. which is the right one my phone.
"1. Remove SD
2. Remove HSPL with HSPL2_RUN.exe (flash SPL 1.66.0000 with HSPL2_RUN.exe)
3. PowerOff the phone
4. Boot to bootloader (VolDown+PowerOn) and when it shows "USB" flash stock ROM by running matching RUU_Leo_S_HTC_XXX_3.14.XXX_Radio_15.42.50.11U_2.15 .50.14_LEO_S_Ship.exe (get yours HERE)
5. Hard Reset (when phone starts booting after step 4, remove the battery, insert it back press VolUp+VolDown and still holding both press PowerOn and follow the instructions)
6. Boot to homescreen.
7. Run SSPL_RUU.exe with Artemis v40 RUU_Signed_0409.nbh in the same folder - YOU HAVE TO BE ON HOME SCREEN, NOT BOOTLOADER (this took me 3 tries until succeded - yes - nerve wrecking, but works). If it doesn't work (hangs on black screen for more than 2min or stays at 0%) remove the battery and try again. If still doesn't work - try solutions in NOTE below.
8. Hard reset (instructions in step 5)
9. when on homescreen - softreset."
Looked at the thread (26465) from which I copied the instructions above. As per the comment I wont be able to upgrade. Is that correct?
Also if I upgrade the radio will that cause any trouble? Or is the radio upgrade not necesary,
Thanks very much for helping.
Sir this will not work on a Telstra ROM!!
There isn't a 3.14.841.x Stock Rom available!!
Don't install stock rom over SD on your device if it isn't create for!
There are two way's to do:
- Waiting for a available Stock Rom 3.14.841.x ore a compatible HSPL version.
- Ore using the GoldCard technique.
praveen_gec said:
Hi, After reading the threads on ROM upgrades now I am confused if I can upgrade my HD2 having Telstra ROM with Artemis HD2 v40.0. (thread 612580)
My ROM version is 1.49.841.1 (71528) WWE
Radio Version 2.05.51.11
Protocol Version 15.28.50.07U
Manila Version 1.0.19211622.1
OS Version 5.2.21869 (21869.5.0.82)
I have seen different methods of upgrade. That confused me again. which is the right one my phone.
"1. Remove SD
2. Remove HSPL with HSPL2_RUN.exe (flash SPL 1.66.0000 with HSPL2_RUN.exe)
3. PowerOff the phone
4. Boot to bootloader (VolDown+PowerOn) and when it shows "USB" flash stock ROM by running matching RUU_Leo_S_HTC_XXX_3.14.XXX_Radio_15.42.50.11U_2.15 .50.14_LEO_S_Ship.exe (get yours HERE)
5. Hard Reset (when phone starts booting after step 4, remove the battery, insert it back press VolUp+VolDown and still holding both press PowerOn and follow the instructions)
6. Boot to homescreen.
7. Run SSPL_RUU.exe with Artemis v40 RUU_Signed_0409.nbh in the same folder - YOU HAVE TO BE ON HOME SCREEN, NOT BOOTLOADER (this took me 3 tries until succeded - yes - nerve wrecking, but works). If it doesn't work (hangs on black screen for more than 2min or stays at 0%) remove the battery and try again. If still doesn't work - try solutions in NOTE below.
8. Hard reset (instructions in step 5)
9. when on homescreen - softreset."
Looked at the thread (26465) from which I copied the instructions above. As per the comment I wont be able to upgrade. Is that correct?
Also if I upgrade the radio will that cause any trouble? Or is the radio upgrade not necesary,
Thanks very much for helping.
Click to expand...
Click to collapse
kurt-willems said:
Sir this will not work on a Telstra ROM!!
There isn't a 3.14.841.x Stock Rom available!!
Don't install stock rom over SD on your device if it isn't create for!
There are two way's to do:
- Waiting for a available Stock Rom 3.14.841.x ore a compatible HSPL version.
- Ore using the GoldCard technique.
Click to expand...
Click to collapse
Thanks for the quick reply. I will start reading the Gold Card technique. But thought of asking if there is any disadvantage to this? or is it just like the normal upgrade and it will let me upgrade in the future again..
hey i ve recently tried to downgrade my SPL from 2.08 to 1.42. i tried the microSD flashing
but after half an hour nothing comes out and when i want try to flash to my stock rom, it stuck at the 0% and then an error comes out.
i dont have any idea what happen but fortunately im able to use my phone to which means my phone wasnt brick
any one knows what happen?
thanks!
Confused009 said:
hey i ve recently tried to downgrade my SPL from 2.08 to 1.42. i tried the microSD flashing
but after half an hour nothing comes out and when i want try to flash to my stock rom, it stuck at the 0% and then an error comes out.
i dont have any idea what happen but fortunately im able to use my phone to which means my phone wasnt brick
any one knows what happen?
thanks!
Click to expand...
Click to collapse
Hmm, SPL 2.08.0000 is normally from the HTC HD2 T-Mous device (the one with red and green buttons at the bottom)
So can you communicate us witch device you have, and witch stock ROM you have used for installing.
alright mine isnt the colors button mine is the asian HTC HD2 i remembers i flashed the WWE version, HardSPL 2.08HSPL and installed chucky rom and then back to the WWE 1.66(same as previous).a few weeks later, i installed nand gingerbread using magldr 1.1. after found out that i could install the wp7, i wanna try to downgrade the SPL from 2.08 to 1.42 with the sdcard method but it failed stuck at loading screen. try to flash baxk the stock rom whoch is Wwe but stuck at the 0% and error showed up.
im sorry for any spelling error cuz im using my hd2 here
so ya thanks!
Confused009 said:
alright mine isnt the colors button mine is the asian HTC HD2 i remembers i flashed the WWE version, HardSPL 2.08HSPL and installed chucky rom and then back to the WWE 1.66(same as previous).a few weeks later, i installed nand gingerbread using magldr 1.1. after found out that i could install the wp7, i wanna try to downgrade the SPL from 2.08 to 1.42 with the sdcard method but it failed stuck at loading screen. try to flash baxk the stock rom whoch is Wwe but stuck at the 0% and error showed up.
im sorry for any spelling error cuz im using my hd2 here
so ya thanks!
Click to expand...
Click to collapse
Probably you have take the wrong stock ROM.
Just go to the HTC webpage > support > HTC HD2 > Download > And enter YOUR S/N to download the right stock ROM.
Flashing stock ROM over SD will remove HSPL, and if there isn't HSPL you can't install a stock ROM from a other aria. Probably you used the general WWE stock ROM and (I think, not sure) you need the Asian English stock ROM
does that means i need to HSPL my phone and i will be able to install my stock rom?
Confused009 said:
does that means i need to HSPL my phone and i will be able to install my stock rom?
Click to expand...
Click to collapse
For the moment you needs first install the right stock ROM.
At no point durinng any standard flashing process is it necessary to flash spl1.42.
I suggest you read up some more.
If your spl is 2.x just run hspl2 and choose whatever spl hspl you want.
well i cant flash the right rom... stuck at 0%....
EDIT: my bootloader screen
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Alright I just flashed my phone to the STOCK ROM of mine which is the WWE_Asia version.
So whats next?
Confused009 said:
Alright I just flashed my phone to the STOCK ROM of mine which is the WWE_Asia version.
So whats next?
Click to expand...
Click to collapse
Next??
Well you can do such much. All depends on what you will.
btw forgot to say one thing, thanks guys!
anyway i tried to install the wp7 on hd2 but it kept rebooting. any idea why?
Confused009 said:
btw forgot to say one thing, thanks guys!
anyway i tried to install the wp7 on hd2 but it kept rebooting. any idea why?
Click to expand...
Click to collapse
Faulty SD card or bent battery pins are common causes. In the case of the SD card give it a good, full format, then leave it blank and reinstall wp7
Hello,
I have tried absolutely everything I know and that I have read. 3 different micro sd cards and 2 card readers. I actually bought a Kingston card and kingston card reader because I read kingston works fine for goldcard. I am desperate for fixing this.
There is no way I can get passed the loading screen after rebooting the phone in usb host mode. This are the steps I follow.
My phone at&t Titan pi39100
1. Create goldcard using a 2gb kingston.
1.1 Format the card in Fat32
1.2 Apply the goldcard tool
1.3 Copy the eterimg.nhb file that comes in the file provided by Cotulla for the SPL. (25 mb) ( I have actually tried inverting the order of steps 1.2 and 1.3 just for the sake of trying)
2. Prepare the Y cable as you can see in the pictures attached and reboot the phone and try to flash the SPL. Pressing power, vol - and camera. It gets in to the usb host mode and then a loading screen appears for a few seconds. Next thing I see is the spl screen reading
PI39100 MFG
SPL-2.5 160015.3 (137079)
eMMC SND 15188MB
TOUCH A1 (F:81, ID:1, V11, B:F8)
RADIO- 16.23.02.26_A
Now, I have noticed that if after this I try to flash the hspl I get the congratulations message, but my phone has not changed at all and I cannot flash any custom rom.
I read somewhere that the MFG may be a type of SPL that is impossible to flash, Can someone please confirm that I am not missing any step that that there is just no hope for my phone?
I have spent hours and hours reading and trying with this. I had the hope that some of the problems I have with the phone will be fixed with a Custom Rom, but if I can't flash it, I think I'm getting rid of the phone. I see lots of potential with the windows phone but my personal experience has been terrible
If someone can help I would be totally thankful.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
andres22 said:
Hello,
I have tried absolutely everything I know and that I have read. 3 different micro sd cards and 2 card readers. I actually bought a Kingston card and kingston card reader because I read kingston works fine for goldcard. I am desperate for fixing this.
There is no way I can get passed the loading screen after rebooting the phone in usb host mode. This are the steps I follow.
My phone at&t Titan pi39100
1. Create goldcard using a 2gb kingston.
1.1 Format the card in Fat32
1.2 Apply the goldcard tool
1.3 Copy the eterimg.nhb file that comes in the file provided by Cotulla for the SPL. (25 mb) ( I have actually tried inverting the order of steps 1.2 and 1.3 just for the sake of trying)
2. Prepare the Y cable as you can see in the pictures attached and reboot the phone and try to flash the SPL. Pressing power, vol - and camera. It gets in to the usb host mode and then a loading screen appears for a few seconds. Next thing I see is the spl screen reading
PI39100 MFG
SPL-2.5 160015.3 (137079)
eMMC SND 15188MB
TOUCH A1 (F:81, ID:1, V11, B:F8)
RADIO- 16.23.02.26_A
Now, I have noticed that if after this I try to flash the hspl I get the congratulations message, but my phone has not changed at all and I cannot flash any custom rom.
I read somewhere that the MFG may be a type of SPL that is impossible to flash, Can someone please confirm that I am not missing any step that that there is just no hope for my phone?
I have spent hours and hours reading and trying with this. I had the hope that some of the problems I have with the phone will be fixed with a Custom Rom, but if I can't flash it, I think I'm getting rid of the phone. I see lots of potential with the windows phone but my personal experience has been terrible
If someone can help I would be totally thankful.
Click to expand...
Click to collapse
the AT&T Branded HTC Titan is not compatible with DFT's HSPL at the moment. Any attempt will update your SPL from 1.10 to 2.5 which is locked to the phone. Only Rom that is flashable is the Stock AT&T image.
Last we heard from Cotulla among other HTC Titan users are testing possible issues/solution. So for the time being there is no ETA as usual and we AT&T Titan owners are stock with what we currently have.
So the best you can do is flash the stock rom and update to 8107 and patiently wait for any news from DFT/Cotulla
Hey yo...is this an ATT Titan? or an unbranded Titan? It looks like an ATT Titan...but anyway, if it is an ATT Titan, did you successfully debrand the device to the Euro Rom first?
I see Tachi has beaten me to the punch...
Yes...I think we need to tell Cotulla or DFT to put a warning to ATT users who want to try this on the direction page.
IT IS AN ABSOLUTE MUST FOR AT&T TITANS THAT IN ORDER TO INSTALL THE DFT SPL/HSPL - YOU MUST FIRST DEBRAND YOUR DEVICE TO A EURO ROM! - lol -- However, I hear that soon ATT users will be getting some updates along with the 2.5 SPL...so this may be only temporary.
Try to flash back to the original ATT rom and see if the SPL will return back to 1.10. If it doesn't...be patient...they are working on a fix for this.
the AT&T Branded HTC Titan is not compatible with DFT's HSPL at the moment. Any attempt will update your SPL from 1.10 to 2.5 which is locked to the phone. Only Rom that is flashable is the Stock AT&T image.
Last we heard from Cotulla among other HTC Titan users are testing possible issues/solution. So for the time being there is no ETA as usual and we AT&T Titan owners are stock with what we currently have.
So the best you can do is flash the stock rom and update to 8107 and patiently wait for any news from DFT/Cotulla
Click to expand...
Click to collapse
Hi Tachi91, Yes I updated to 8107. I guess it is all I can do for now. Thanks for your answer!
Hey yo...is this an ATT Titan? or an unbranded Titan? It looks like an ATT Titan...but anyway, if it is an ATT Titan, did you successfully debrand the device to the Euro Rom first?
I see Tachi has beaten me to the punch...
Yes...I think we need to tell Cotulla or DFT to put a warning to ATT users who want to try this on the direction page.
IT IS AN ABSOLUTE MUST FOR AT&T TITANS THAT IN ORDER TO INSTALL THE DFT SPL/HSPL - YOU MUST FIRST DEBRAND YOUR DEVICE TO A EURO ROM! - lol -- However, I hear that soon ATT users will be getting some updates along with the 2.5 SPL...so this may be only temporary.
Try to flash back to the original ATT rom and see if the SPL will return back to 1.10. If it doesn't...be patient...they are working on a fix for this.
Today 09:02 PM
Click to expand...
Click to collapse
I cant go back to 1.10 I am stuck at 2.5 no matter what I do. I tried to debrand to a Euro Rom with no success either, this is actually what had me confused cause I could read some post from AT&T users confirming that they had flashed the DFT HSPL.
Well I will keep waiting. I agree with you that a warning for AT&T usera at the beginning of the post would be helpful.
Thanks a lot to both of you. At least I can sleep tonight knowing I it's not that I am missing some evident step.
AT&T sucks their policy is an abuse of power (to the eyes of a European) There are lots of things I miss from the US and I am looking forward to go back, but my phone carrier is not one of them
P.S. I can't make backups of the phone with Zune either, it give me an error and neither the patch from htc or the solution from microsoft work. Just sharing it in case it helps someone.
xconomicron said:
Hey yo...is this an ATT Titan? or an unbranded Titan? It looks like an ATT Titan...but anyway, if it is an ATT Titan, did you successfully debrand the device to the Euro Rom first?
I see Tachi has beaten me to the punch...
Yes...I think we need to tell Cotulla or DFT to put a warning to ATT users who want to try this on the direction page.
IT IS AN ABSOLUTE MUST FOR AT&T TITANS THAT IN ORDER TO INSTALL THE DFT SPL/HSPL - YOU MUST FIRST DEBRAND YOUR DEVICE TO A EURO ROM! - lol -- However, I hear that soon ATT users will be getting some updates along with the 2.5 SPL...so this may be only temporary.
Try to flash back to the original ATT rom and see if the SPL will return back to 1.10. If it doesn't...be patient...they are working on a fix for this.
Click to expand...
Click to collapse
I have Bootloader version: 1.10. What does this mean? I can debrand my at&t titan without goldcard method?
Strangely, I also have internet sharing on my AT&T titan.
zup2sky said:
I have Bootloader version: 1.10. What does this mean? I can debrand my at&t titan without goldcard method?
Thanks
Click to expand...
Click to collapse
NO!
Flash the European ROM so that your titan can be debranded. If you attempt to DFT unlock now you will be stuck like the rest of us
Tachi91 said:
NO!
Flash the European ROM so that your titan can be debranded. If you attempt to DFT unlock now you will be stuck like the rest of us
Click to expand...
Click to collapse
Somewhere in the forum, you must use GOLDCARD method to debrand- does this applies to me as well? I bought the AT&T Titan used- the previous owner somehow has internet-sharing option under the settings.
zup2sky said:
Somewhere in the forum, you must use GOLDCARD method to debrand- does this applies to me as well? I bought the AT&T Titan used- the previous owner somehow has internet-sharing option under the settings.
Click to expand...
Click to collapse
Yes you need a goldcard to debrand the titan. To get internet sharing under settings the previous owner must have updated to 8107 since thats how i got that under settings as well. So you can check under "About" and if you have anything other then 7720 under "OS Version" that means they used the cabsender.
Tachi91 said:
Yes you need a goldcard to debrand the titan. To get internet sharing under settings the previous owner must have updated to 8107 since thats how i got that under settings as well. So you can check under "About" and if you have anything other then 7720 under "OS Version" that means they used the cabsender.
Click to expand...
Click to collapse
I have 7.10.7720.68 - So by your logic, he did not use 'cabsender.'
I wonder how he got internet sharing there- can this phone be possibly unlocked?
zup2sky said:
I have 7.10.7720.68 - So by your logic, he did not use 'cabsender.'
I wonder how he got internet sharing there- can this phone be possibly unlocked?
Click to expand...
Click to collapse
If by unlock you mean full on Interop DFT unlock then yes if you have SPL 1.10
Those who have had success using DFT unlock had previously used a Goldcard to flash a European ROM. The issue we are having is that if you attemp to flash DFT unlock with SPL 1.10 to get stuck.
So if you want custom roms it will be smart to first flash a European ROM (2.05) using the goldcard. Once you are runnig the unbranded 8107 rom then start the DFT unlock process
No problem andres22,
haha, And yes, I would agree...as would most-all AT&T users too.
zup2sky said:
Somewhere in the forum, you must use GOLDCARD method to debrand- does this applies to me as well? I bought the AT&T Titan used- the previous owner somehow has internet-sharing option under the settings.
Click to expand...
Click to collapse
All the AT&T Titan I believe, had the Internet Sharing in the stock Rom. I got 2 Titan last November with 7720 ROM with it.
Just want to let everyone in this thread know;
I see claims that debranding must be done and guarantees success...
There has been no quantitative proof that debranding does anything. The success stories are the loudest, of course, and more and more threads keep popping up where users are saying "if only I debranded I wouldn't be stuck on SPL 2.05!"
Having met with success after debranding doesn't prove anything. I didn't debrand and I got my Titan to HSPL, admittedly it was a lengthy and unnerving process. I don't think that debranding does anything, I don't think it even logically CAN do anything, but what I do know is that the AT&T titan is not "not supported", as was claimed in one of the first posts. It was supported, but I'd say half (or less than half, again, loudest of the bunch) of users are having issues with at least two parts of the process, and DFT is looking into it.
I guess I should get off my ass and see if I can unstick the SPL on my second titan.
link68759 said:
Just want to let everyone in this thread know;
I see claims that debranding must be done and guarantees success...
There has been no quantitative proof that debranding does anything. The success stories are the loudest, of course, and more and more threads keep popping up where users are saying "if only I debranded I wouldn't be stuck on SPL 2.05!"
Having met with success after debranding doesn't prove anything. I didn't debrand and I got my Titan to HSPL, admittedly it was a lengthy and unnerving process. I don't think that debranding does anything, I don't think it even logically CAN do anything, but what I do know is that the AT&T titan is not "not supported", as was claimed in one of the first posts. It was supported, but I'd say half (or less than half, again, loudest of the bunch) of users are having issues with at least two parts of the process, and DFT is looking into it.
I guess I should get off my ass and see if I can unstick the SPL on my second titan.
Click to expand...
Click to collapse
If your claim is true- this changes everything.
Care to elaborate how you obtained HSPL on your titan? I am sure at&t titan owners are eager to know
Well I have two AT&T Titans, because I thought I half bricked my first one with the f400 error. Then I f400'd the second Titan.
I went back to work on my original Titan, I got rid of the f400 error and I THINK I was stuck on SPL 2.05, HSPL wouldn't install even though it said success. Some combination of hard resetting and flashing the stock ROM brought me back to SPL 2.10, from there I flashed 2.05 again and then HSPL worked.
I have spent significantly less time trying to HSPL my second Titan, but for what it's worth I have been unable to duplicate whatever I did to my first Titan in my half hour of tinkering with it. Stuck on 2.05.
(I think I spent no less than 20 hours on my first Titan, though most of that was because goldcard wasn't working with all but one of my USB devices.
Stuck at spl screen with 2.05 spl
link68759 said:
well i have two at&t titans, because i thought i half bricked my first one with the f400 error. Then i f400'd the second titan.
I went back to work on my original titan, i got rid of the f400 error and i think i was stuck on spl 2.05, hspl wouldn't install even though it said success. Some combination of hard resetting and flashing the stock rom brought me back to spl 2.10, from there i flashed 2.05 again and then hspl worked.
I have spent significantly less time trying to hspl my second titan, but for what it's worth i have been unable to duplicate whatever i did to my first titan in my half hour of tinkering with it. Stuck on 2.05.
(i think i spent no less than 20 hours on my first titan, though most of that was because goldcard wasn't working with all but one of my usb devices.
Click to expand...
Click to collapse
can you give the link for the stock rom with spl 2.10 and did you boot the phone successfully after flashing this stock rom???? Please help i am stuck on the spl screen indefinitely and nothing is working to get my phone back to working condition...