i flashed me wizard with a new rom and it anit my first time and it worked great but just for one day after that day my wizard shut off i tryed to open it but it never prossed after the splash screen so i trid to reat the factory defolt but it says format error so i dicided to flash an new rom thro the bootloder screen coz i thought that i had a rom colabse so i flashed several roms but every time same thing habens the rom is flashed the wizard startas but nothing happen except the sblash screen and it dosn't prossed opning but the splash screen changed but stilll the same os , ipl and spl
plz some body help me plzzzzzzzzzzzz :'(
i-mate k-jam g4
Related
i've installed diamond black 3.1 rom and tonight i changed registry with advanced config tool(its in this rom-i have changed system cache)....after soft reset device freeze at boot screen. hard reset doesn't work..."format failed"-this message only appers.i have entered bootloader and installed wizard love rom...didn't help. i think that registry messed up everything...how can i get back to old registry when i cannot make a hard reset?? my device is SPV M3000 G4 its CID unlocked.It's strange cause device is charging battery and i can enter the bootloader so i dont have a brick...but problems with hard reset and even wizard love rom couldnt help....can someone had this problem too??
looking for ur advice
thanks
when you say you installed wizard love did it go through install all ok but still no boot?
yeah it went all good...i have instakked it without a problem 100% finished and as usual soft reset...but still freeze at boot screen...it drives me mad, i have tried almost everything and i dont know whats happening
stilll not workin'
i have tried everything...have installed 2 difrent wizard love roms and my htc wizard still freeze at boot screen...i can enter the bootloader and install roms but they are all stuck at bootscreen...my problem started when i changed system cache in my registry using advanced tool configuration ( BD 3.1). first after soft reset Wizard was frozen at windows screen, after hard reset it was hanging at touch screen config...i tried to hard reset again but i can only see info that "format failed"....what can i do now?? pleeeeaseeee help....
does your operator have a stock rom you can download?
i was looking for it...i need polish Orange ROM SPL 2.22.1.1 maybe..its my 2nd night fighting with that freezy bastard...do u know where to find one??i have seen some SPL's but they are for NL orange...do u thnk that original rom from orange will help??
kayzerrr said:
i was looking for it...i need polish Orange ROM SPL 2.22.1.1 maybe..its my 2nd night fighting with that freezy bastard...do u know where to find one??i have seen some SPL's but they are for NL orange...do u thnk that original rom from orange will help??
Click to expand...
Click to collapse
Polish SPL= the same as Dutch SPL.
Orange SPL = t-mobile SPL etc..
Only the version changes..
Operators cannot edit the SPL's, they have to use HTC's SPL's.
What only differs is the CID block, which will not be overwritten when flashing either IPL or SPL.
sooo...i tried to remove the HARDspl but i couldnt get into my wm cause device freeze at bootscreen so i have downloaded the spl nk.nbf for orange and flashed this file with RUU...i have now 2.18.0001 SPL but Dutch rom cannot be installed it shows some error INVALID ID or something like that...I dont think that polish and dutch roms are the same because i cannot flash this dutch rom...have u got any idea what i should do next?? its really annoying cause ive tried almost everything and still no progress....and i still dont know if i removed hardSPL with this method that i described...in order to flash an original rom do i have to go back to CID lock??
i tried to install NL Orange rom but its not working...i can only get message " INVALID VENDER ID" with other roms like T-MOBILE i get message "UPDATE ONLY" --try to get newer nk.nbf file...what should i do now??
First im sorry if this has been asked before
but i already search and tried the solution and still unresolved
i have dopod 818pro that stuck and 2nd Splash Screen
G4 with ipl 2.15.0001 and spl 2.20.0001
Now i already tried to upgrade using original rom dopod 818pro (RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship.exe)
in the bootloader and its succesfull update but after hard reset
it still stuck at the splash screen
already tried a couple times on a different computer also and its still the same result
after i that i take nerve to upgrade using qtek (RUU_Prophet_220734_2207114_024721_NVID_2.exe)
the update was successfull and the 2nd splash was changed from dopod to qtek
but its still stuck at the 2nd Splash Screen
At different thread a guy suggest to update using PVTemp rom (ROMUpdateUtility_NV_G4.exe) and hard reset.
i download it and try it and its still stuck at the 2nd splash screen.
So please help me guys by giving a solution or
tell me how to get back the 2nd splash screen to dopod
cos maybe i tried to sent it back to original service center.
cos now everytime i update using the original dopod rom it always say "Please use newer nbf" this was after i update using the qtek rom..
Thx guys
hi everyone, can someone please tell me what i did wrong.
I have flashed a few roms before and this time every time i start the 8125 it gets stuck cingular raising the bar screen.
The phone will still do hard reset.
Ipl 2.25.0001
Spl 2.2.5.001
Gsm 02.25.11
OS 11.0.1.1
I tried to do upgrade it to the the TNT 19199 professional wizard v.2. I used the shell tool and dropped the nk.nbf file into the shell folder like i have always done before and this time its stuck at the same screen. I can't connect it to active sync or even the computer to put back the stock cingular rom back in. Can someone please tell me what im doing wrong, from what i understand the phone is not bricked yet because i can still do a hard reset but still sends me back to the main startup screen. Help please.
Stock ROM can be flashed from Bootloader mode, just put your Wizard into bootloader mode (Camera+reset), then run the stock ROM RUU.
thanks helped out perfectly
Same Problem
New to this...Could someone Please give me a walkthrough on how to do this.I can still hard reset.I reset using camera + reset...Brings up r/b/g screen.I don't know how to flash from there.Any help is greatly appreciated.
IPL 2.25.0001
SPL 2.25.001
OS is 10.0.0.10
I took it back to WM5.Seems to be OK.Gonna try using Wizard Service Tool instead of ShellTool.See what happens
You should HardSPL, then use RUU on ROMs without IPL directly.
Hello All
As a topic, and I have a G4 wizard bricket by uploading rom g3 to my g4. I use Jtag and wake up beautifully, and even displays a nicely .. 2.26.Olip 2.26 . I put in to my wizard Repair Rom Love , and here there is a problem because, like after uploading the rom should flit here after uploading the RRU there is a 3-color screen (bootloader) .. I try load Polishrom after Love Rom from the G4, but orange is the same after the reboot the bootloader appears and nothing ... how to disable the wizard and turn a black screen, sometimes there just blinks and so .. right after Love made hard reset and nothing ..
Someone help with this problem?Please
(sory for my english but i using google translate )) )
yamakashi1 said:
Hello All
As a topic, and I have a G4 wizard bricket by uploading rom g3 to my g4. I use Jtag and wake up beautifully, and even displays a nicely .. 2.26.Olip 2.26 . I put in to my wizard Repair Rom Love , and here there is a problem because, like after uploading the rom should flit here after uploading the RRU there is a 3-color screen (bootloader) .. I try load Polishrom after Love Rom from the G4, but orange is the same after the reboot the bootloader appears and nothing ... how to disable the wizard and turn a black screen, sometimes there just blinks and so .. right after Love made hard reset and nothing ..
Someone help with this problem?Please
(sory for my english but i using google translate )) )
Click to expand...
Click to collapse
U need to flash SPL again with a RUU utility..after flashing spl try normal ROM flashing method
I have flashed my qtek s200 with ``RUU-Prophet-AKU2.2-2.20-2.47.21-Jester-r1 `` all goes perfect after update completes bootloader screen appears i tried soft reset as well as hardspl but nothing works than i tried ruu nvid rom but it also bring no result. I also tried prophet recovery but the phone is still at bootloader.I got an suggestion to hardspl the phone & than update but after hardspl by nvid software the phone do not show any detuction witk computer..
Plz help if any one can....
shehzad143 said:
I have flashed my qtek s200 with ``RUU-Prophet-AKU2.2-2.20-2.47.21-Jester-r1 `` all goes perfect after update completes bootloader screen appears i tried soft reset as well as hardspl but nothing works than i tried ruu nvid rom but it also bring no result. I also tried prophet recovery but the phone is still at bootloader.I got an suggestion to hardspl the phone & than update but after hardspl by nvid software the phone do not show any detuction witk computer..
Plz help if any one can....
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=353547