I have bought a Wallaby QTek 1010, but without a drivers/software CD. Please help me: what do I need to install on my pc, to connect to my Wallaby (what software? what drivers?) And where can I download it?
(I did have searched the internet, but couldn't find enything )
1.) ActiveSync
2.) directly from Microsoft for free
Stefan
Thanx! ...off to try it out!
software
Hi i have a 1010 and have upgraded to w2003 from LumpiStefans rom kitchen, hasn't missed abeat since, so you may want to flash your rom and update.
Peace
Just downloaded ActiveSync on the Evil Empire's site, plugged the USB cord directly to my Qtek 1010 and the other end to the PC's USB port, still can't detect it!?
Bad cord?
Do I need the cradle?
I only have the unit and the charger, that's it.
HELP!
Are you using the correct USB-Cable?
Is it designed for the XDA?
Which ROM Version dou you have on your device?
Have you configured ActiveSync on your PC for USB Connection?
Stefan
Hey there,
So i have a problem with my new qtek 8500, i want to flash it to wm6.1, so i made normaly the cid unlock, the application unlocker. So to my problem, when i start into spl, then comes the screen with the 3 coloured lines, and then is my connection on the pc away, it is then not connected, and vista installed new drivers for the device, that dont works, so what can i do?
thank you for the answers
René
Hi,
You should flash it from Win XP since flashing from Vista is not (yet?) supported.
Cyrebre
i am having the same issue.. i had done CDi from vista via bluetooth.. after that no matter what i do the phone is not willing to get connected viz activesync.. i tryed in 2 differend systems.. same.. not working with bluetooth nor usb..i is charging but no connection... i have another cingular 3125 as backup as well that seems to be working fine..
I am installing the latest version of blackberry connect on my US Neon but get a PIN0 error when I try to set up with blackberry connect desktop manager. I have read through the the blackberry connect forums and tried some hex editing of the Neon Rom but still getting same error. Anyone else working on this or have suggestions- Thx
First ... what OS Build you have and AKU?
try to edit the registry to AKU 1.0.0 or try 0.4.0 if you use a cocked rom from any body ... possible you cant get blackberry connect to work! then you must flash back to your original rom or try the telstra rom.
Tried all the roms cooked and original (US and Telstra)(CE 5.2.1941)- I have a Kaiser that I have blackberry connect working on and have tried changing the AKU to 0.4.2 on the NEON- Even before though with the Kaiser when I installed BBC, it would at least connect to the Desktop Manager, but with the NEON I get a PIN0 even when I try to do that. Is there a way to hack the Device Model to have it think it is a Kaiser and not a NEON?
You can HEX Edit the XIP, but i dont know dll you need to patch!
help me...
WWE2.15 can be flashed in to 818pro, others can't...
only under xp or with a virtual machine under vista
which virtual machine do you use?
I am running xp on VirtualBox 1.6.4, and i can't flash my qtek s200.
I have configure 1 filter to all my use usb devices.
When i connect my phone, it synce with active sync, but when i run the rom installation program, when my phone displays the bootloader, virtualbox tolds me that it "failed to create a proxy device for the usb device".
Can you tell me how you did?
Note : sorry if my english is aproximative.
sorry i use a old win xp pc
but i hear that it works with VMware
and my english ist also bad too
thank you !
prophet -> throttle diamond and throttle diamon multi lang. both from gullum
kaiser -> throttle II also from gullum
soft and hardspl both phones, everything done under viste home premium 32bit.
no probs at all
and did you try do install tha radio rom 2.19?
schnitzelbrain said:
prophet -> throttle diamond and throttle diamon multi lang. both from gullum
kaiser -> throttle II also from gullum
soft and hardspl both phones, everything done under viste home premium 32bit.
no probs at all
Click to expand...
Click to collapse
Do you have a G3 Prophet?
I have a G3 and the radio rom install didn't work.
nope, I have a G4 and still the standard shipped radio rom
I have just tried to install gollum's rom on vista business 32bits, and the installation crashed.
ok, I've found this : http://forum.xda-developers.com/showthread.php?t=313001
I'll try and tell you if it works.
babinskyo said:
which virtual machine do you use?
I am running xp on VirtualBox 1.6.4, and i can't flash my qtek s200.
I have configure 1 filter to all my use usb devices.
When i connect my phone, it synce with active sync, but when i run the rom installation program, when my phone displays the bootloader, virtualbox tolds me that it "failed to create a proxy device for the usb device".
Can you tell me how you did?
Note : sorry if my english is aproximative.
Click to expand...
Click to collapse
I use vmware server 2 RC1 with a xp appliance, it works nice and easy.
babinskyo said:
ok, I've found this : http://forum.xda-developers.com/showthread.php?t=313001
I'll try and tell you if it works.
Click to expand...
Click to collapse
I've tried the driver and it does not work.
Thanks for VMware, i didn't knew the server version was free. I'll try it.
Flashing G4 Prophet with VMWare works well.
Thank you both, i've just tried vmware and it works !
vmware is the only way for me anyway to flash in vista. i'm sure it's the same for most of us.
don;t know how other people got the other way i.e old drivers etc to work...
Mmmmh, I think I should be thankful that my update didn't brick my prophet and the kaiser from my friend.
When the update fails on your pc is that always at a certain point ?
Do you have USB 2.0 connections and is legacy support in the PC BIOS disabled ?
Just asking for interest.
Has anyone been able to get mtty (or putty for that matter) working with the Raphael on a Vista machine? I have no problems using MTTY 2.10 on any other phone except this one. On the Raphael mtty just hangs if I issue any commands. Could this be a driver problem that is specific to this device?
ETA: since this uses the qualcomm chipset, maybe qpst might be an option for this. has anyone tried that?