hi i had shaps wm6 installed , and then tried to upgrade my radio , it went to 2 % then came back with a error messege , my phone is now stuck in bootloader , any fixes?
in bootloader it says herm300
IPL-1.04
SPL-2.10.0ipro
solved it useing hard flash , thanks !
flashed phone with the lasest unlocker software , but now all i get is the htc smart mobility splash screen ?
mda herm300 it only shows t-mobile screen
got a mda herm300 it only shows t-mobile screen when power on (someone has unlock wrongly)
how can i fix this problem
it can enter bootloader mode by pressing side ok+power+reset
plz give me steps detail and softwares
thanks in advance
digiview said:
got a mda herm300 it only shows t-mobile screen when power on (someone has unlock wrongly)
how can i fix this problem
it can enter bootloader mode by pressing side ok+power+reset
plz give me steps detail and softwares
thanks in advance
Click to expand...
Click to collapse
Have you tried:
- Hard Reset
- Reflashing
- Rerunning the unlocker
- Mtty task 28
digiview said:
got a mda herm300 it only shows t-mobile screen when power on (someone has unlock wrongly)
how can i fix this problem
it can enter bootloader mode by pressing side ok+power+reset
plz give me steps detail and softwares
thanks in advance
Click to expand...
Click to collapse
The forum is NOT for ASKING for help. The forum is FOR reading and then asking...
Recovered From Stuck on Bootloader & Splash Screen
Hi,
I had the same problem (1st stuck on bootloader- reflashed custom ROM then Stuck On Splash Screen with no GSM) on my SPV M3100 after a failed radio upgrade first it was stuck in bootloader for the longest time while i searched and re-tried uprading the radio rom inbetween using recover tools like mitty.exe and NBHextract but nothing happend until i had a brainstorm i had previosly downloaded an original vendors ROM for the Hermes so i flashed it and Pow Pow Pow - Radio and Software Rom back to normal and working OK!!!
First im sorry if this has been asked before
but i already search and tried the solution and still unresolved
i have dopod 818pro that stuck and 2nd Splash Screen
G4 with ipl 2.15.0001 and spl 2.20.0001
Now i already tried to upgrade using original rom dopod 818pro (RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship.exe)
in the bootloader and its succesfull update but after hard reset
it still stuck at the splash screen
already tried a couple times on a different computer also and its still the same result
after i that i take nerve to upgrade using qtek (RUU_Prophet_220734_2207114_024721_NVID_2.exe)
the update was successfull and the 2nd splash was changed from dopod to qtek
but its still stuck at the 2nd Splash Screen
At different thread a guy suggest to update using PVTemp rom (ROMUpdateUtility_NV_G4.exe) and hard reset.
i download it and try it and its still stuck at the 2nd splash screen.
So please help me guys by giving a solution or
tell me how to get back the 2nd splash screen to dopod
cos maybe i tried to sent it back to original service center.
cos now everytime i update using the original dopod rom it always say "Please use newer nbf" this was after i update using the qtek rom..
Thx guys
Hi! I have herm200 and i flash with wrong software. Now phone is booting but is hung up on windows mobile screen. I try to reflash but everyting is restarting in 1%. I need help pls
sorry for eng.
Hy to all! I received an T-Mobile MDA Touch Plus in boot mode(ticolor bar with ruunbh and niki200, spl-1.16.0000, cpld4) and i try to flash with original t-mobile rom "tmobile_mda_touch_plus_2.06.111.2.exe". The flash process is stoped to 42% and now niki200 is still in boot mode but with spl-1.22.0000 and only "serial" on the screen! I can not boot again and i tryed to use MTTY but i received always message "USB port can not open"! how can i boot again this device? Thanks to all!
Please htc developers i need ur help .niki200
I have same problem here after trying to flash my htc niki200 it get to 99% and it stop now phone is in three color and i can flash it with any rom . I have to revive this phone for my customer .
Please i need ur help
i flashed me wizard with a new rom and it anit my first time and it worked great but just for one day after that day my wizard shut off i tryed to open it but it never prossed after the splash screen so i trid to reat the factory defolt but it says format error so i dicided to flash an new rom thro the bootloder screen coz i thought that i had a rom colabse so i flashed several roms but every time same thing habens the rom is flashed the wizard startas but nothing happen except the sblash screen and it dosn't prossed opning but the splash screen changed but stilll the same os , ipl and spl
plz some body help me plzzzzzzzzzzzz :'(
i-mate k-jam g4