HELP PLEASE
S200 G4
IPL: 2.20.001
SPL: 2.G4.4PDA
Sory for my english.
When I try to flash with the original ROM - phone turned off and nothing to do - when I replace the battery - phone start again with the same IPL SPL and so on.
When I try to start bootloader manualy - phone turned off and nothing
When I try to start HardSPL - phone goes to white screen and after 30 minutes nothing is happaned
WHAT TO DO
Thanks in advance
It is shame but I get the solution
1 - When the problem came it came not alone
2 - If You have to solve the problem - first think last cut
3 - Now when I unplug SIM and SDCard - the phone start to work perfect - I dont know why but the result is pretty good.
Related
Help please! A situation such: I have I-mate K-jam
IPL: 2.16.0001
SPL: 2.16.0001
OS: 2.16.9.4 rus
GSM: 2.29.11
Has decided to alter the version RUU_Molski.Biz_226102_22610105_022511_G4_WWE-30MB.exe, has made CIDUnlock with Lokiwiz_02a, it was stitched after end has joined and has shown:
IPL: 2.16.0001
SPL: 2.16.0001
OS: 2.16.9.4 rus
GSM: 2.25.11 - it has changed only and filling ROM
Download an insertion from Qtek in archive Era_RUU_Wizard_AKU2.3_Custom_A2DP.rar CIDUnlock did not make, it was stitched normally did not wish to put a program from rum and at inclusion was going to make reset, phon it was loaded normally, but I have distracted also the automatic device have pressed reset when programs from rum were already put - bodies was switched off and does not join any more in general. The charge for that moment was percent 80, at connection to PC any sounds not be heard and in any way itself does not find out. Charger I connect happens nothing, light-emitting diodes do not burn. I try to come in BOOT LOADER MODE - I clamp cam+reset - anything. Has charged the accumulator on other wizard, now a charge full. Unique attributes of a life it when on charger or on USB stands, the battery pull out also it for a second includes illumination on keys and the screen, more attributes are not present. On a course has found out that the second insertion it G3 with IPL SPL and at me device G4 is fatally or how? Can eat what variants of revival?
Excuse for my English!
Sorry to hear but I think your phone is bricked. If lights illuminates without the battery when charger is plugged in, its bricked. Your only choice, in my opinion, is to get another mainboard and swap it in.
ouch
im brand new here so dont pay to much attention to me.
Isn't lokiwiz02 for the g3? I thought you needed 03 for the G4? I hope for your sake that its not bricked. good luck.
Actually, lokiwiz 0.3 just added the ability to SIM-unlock your G4. not CID, for that you still need to go the imei-check.co.uk
HERM300 - IPL 1.01 - SPL 1.30 Olipro. The problem. When trying to flash a reconstruct dumped OS (only the OS part) from a spanish rom the process stucked at 5%. I had to interrrupt it. Now the phone stays on boot loader each time I turned it on. When I try to flash a rom the flash utility stay for some minutes in "vefying the information... till the 260 error.
My friends, what can I do to revive my hermes (MDA VARIO II)?
Thanks all in advance
Edit: 1. I am using an nbh file remaned to HERMING.nbh in a formated fat32 card and is...update sucess
SORTED!!! WOW!
dcoelho said:
HERM300 - IPL 1.01 - SPL 1.30 Olipro. The problem. When trying to flash a reconstruct dumped OS (only the OS part) from a spanish rom the process stucked at 5%. I had to interrrupt it. Now the phone stays on boot loader each time I turned it on. When I try to flash a rom the flash utility stay for some minutes in "vefying the information... till the 260 error.
My friends, what can I do to revive my hermes (MDA VARIO II)?
Thanks all in advance
Click to expand...
Click to collapse
LOL never mind, took too long to reply DAMMIT
please plesae help my spv m3100 flashed wrong
now my phone stop on boot screen and i want to reflash it but it stop on 1 %
my ipl is 1.04
and my spl is 2.03
now what is the solution for me
dvdaio said:
please plesae help my spv m3100 flashed wrong
now my phone stop on boot screen and i want to reflash it but it stop on 1 %
my ipl is 1.04
and my spl is 2.03
now what is the solution for me
Click to expand...
Click to collapse
Try a couple things...
1. Hard Reset
2. Flash a ROM starting at the botloader screen on the phone (put in bootloader, THEN plug into USB)
3. Use mtty, try the task 28 command.
Your solution like everyone else that has bricked there phone on this forum is to start reading. Start with the WiKi and then the 100 page thread on unbricking phones. I'm sure you have a few long hours ahead of you but there is hope at the end of the tunnel
Austinsync speaks truth in abundance! Your first stop should be the excellent unbricking table that dear old Pof compiled, this is in the WIKI and if you are lucky you won't have to go much farther than that...
Hello everyone.
I have a problem with my G4 from Vodafon Germany.
I woke up this morning and it was stuckd up. I did a soft reset...denn came the Bootloader and it stopped there.
The Bootloader shows:
IPL 2.21.0001
TPL 2.21.0001
I tried to flash the ROM from Vodafone Germany ROM-Version 2.21.3.1from here: http://www.vodafone.de/hilfe-support/technischer-support/97016_93771.html
It says 100% success, then Congratulations, the Phone starts up again and it is again stucked up in the Bootloader. It still shows only:
IPL 2.21.0001
TPL 2.21.0001
What should i do to get it working again?
Please HELP
Stefan
Problem solved.
I just took the Battery out for 5-10 Minutes.
It works now with the WIZ LOVE Rom.
I'll install TNT later.
bye
Hi
i have the same problem
but that battery trick wont work with my cell phone
i really dont know
but i dont have it flashed right.
because with the exe files of ruu's and more of them
he wont go furhter than 0%
it says device not detected no response, because when i launch the exe files
active sync will just lose connection.
after this i get this same bootloader problem
regards
R.G
hello, I'm Lucia is the 3nd post one of my friends told me that I see the solution to my problem here.
I have a big problem, my qtek 9100 turn with the three (3) color (bootloader).
IPL 2.21.0001
SPL 2.21
I just flashed but nothing good and even the hard reset
please help me
ewoenam said:
hello, I'm Lucia is the 3nd post one of my friends told me that I see the solution to my problem here.
I have a big problem, my qtek 9100 turn with the three (3) color (bootloader).
IPL 2.21.0001
SPL 2.21
I just flashed but nothing good and even the hard reset
please help me
Click to expand...
Click to collapse
to succeed in doing Flash, you should follow the guidelines given by vippie
check out his thread >>> http://forum.xda-developers.com/showthread.php?t=298613&highlight=button+rom
ewoenam said:
hello, I'm Lucia is the 3nd post one of my friends told me that I see the solution to my problem here.
I have a big problem, my qtek 9100 turn with the three (3) color (bootloader).
IPL 2.21.0001
SPL 2.21
I just flashed but nothing good and even the hard reset
please help me
Click to expand...
Click to collapse
Sorry to say but you’ve bricked your phone
This is what you have
IPL 2.21.0001 = G4 Device
SPL 2.21 = G3 Device
You would need to put a G4 SPL back in the phone
To my knowledge nobody has been able to fix this