Related
MTTY's "wdata" cmd unlocked on SPL 2.03!Can it Unbrick the bricked ones w SPL 2.03??
I have found a way to unlock "wdata" command in bootloader 2.03!
summary:
In bricked hermeses with SPL 2.03 - NO GSM - KITL disabled, the wdata command is locked. I am not good at programing but I want to know if it possible to change the SPL(bootloader) of bricked hermeses with this command in mtty.exe??!!
How to:
1.Use the trinity splxploit -windows by pof (unbrick.bat). Let the program run for some seconds and then just close that.
2.Do not unplug the usb or soft reset the device.
3.Run mtty.exe and type "wdata" the command is unlocked!
I wanna know can we erase just the CID by erase command and write a CID value using wdata command?
If it can be done then we can unbrick our hermeses!
Yes it enable wdata, you don't need to change CID, if you can load OS.nb, then from Windows use SSPL. But real problem is how to load OS.nb via wdata
need Hermes splxploit -windows ??
i many time write in this forum who can unbrick hermes with spl 2.03 cid locked,no kitl,can not boot,stack in bootloader....only solution is that pof
or good man create Hermes splxploit -windows this will jump spl address and temporaly cid unlock Hermes then we can flash any rom.
I unbrick many Trinity bat wait solution for Hermes???
Bat wait ........and wait.
Zemo znas li ti kako da sredis brikovan hermes cid zakljucan spl 2.03...itd.
Yes, we need pof help, it will be very good to have spl exploit for hermes.
Bas nas dosta ima na XDA, mozes samo preko JTAG koliko je meni poznato ali neznam nikog ko to moze da uradi. Odakle si?
Yes, we need pof help. It will be very nice to have SPL exploit.
Mislim da moze preko JTAG, ali neznam ko to moze da uradi, odakle si?
Bad news people,
The memory layout on hermes is different than on trinity, i already looked
into this and is not possible to exploit it in the same way as I did in
trinity.
I am sorry but I have no time to invest on this now
Best Regards,
pof
Click to expand...
Click to collapse
We can wait for pof, and pray
So, we will wait.......!
I'm a prayer too
So, we will wait.......!
I'm a prayer too
Reply With Quote
Click to expand...
Click to collapse
MY HERMES IS BOOTED OS TODAY!!!
It was half dopod and half T-Mobile...
T Mobile Customanisation: Instalig Dopod stuff???
I soft reset it and it stuck again.
Booted OS
Today my hermes booted os, after soft reset it stuck again. But there is hope, right?
Can you solve No GSM with SD Card Flash?
Then Copy Hardspl V7 to the sd card and when your mobile booted into os just run that from your device.
Yes, I know that.
If you have similar problem:
1.Leave Hermes without battery for some time, hour or so.
2. DO NOT turn it on, do a HARD RESET*
*If don't work try several times
hardspl v7 or any other after 100% message image corupted
koorosh_bsboys said:
Then Copy Hardspl V7 to the sd card and when your mobile booted into os just run that from your device.
Click to expand...
Click to collapse
Yes i know this bat this will not work if hermes cid locked and stack in bootloader no kitl and gsm.Can not boot os this only work in hermes cid unlocked device then sd card work...bat what i can do when device cid locked and can not connect in activsync and everytime when try to use hardspl v7 or any other after 100% message image corupted only solution is that pof create jumpspl pach that work from dos without activesync this can help me and many other i will donate with paypal if somebody can creat this that work in hermes......
............again harmes how to unbrick 2.03
Many people try to unbrick spl 2.03 stack in boot no gsm and kitl mode and can not boot os just led light when power up...can go in bootloader bat this is all!!!.
I speak with imei-check abaout this and they told me that can repair this and it will cost 60pounds+ Here is message from imei-check.co.uk to me Hello,
You must send the device to us. The cost is 60 GBP + 15 gbp postage fee to return it back to you (or 7 GBP if we send it back to a UK address). In the day we receive it, we fix it, and next working day we send it back to you.
If you want to go ahead, please send the device + battery
(i think just need to open temporaly cid unlock in spl and this will help i mean from dos prompt,blank screen+ then flash??)and i must sent from Europe Union country .I live in Serbia and think that solution to unbrick hermes existed bat not want to tell many people......?? I will work in this now and i hope that solution will be for free when fix this.. I unbrick many hermes.artemis...etc..in Serbia bat this solution to unbrick hermes with spl 2.03 temporaly can not not have time to try?. I now will try many solution and will post here when fix this,you can trust me??....
If somebody else create solution before me please sent me message to know??
Do not post any solution from this site i try all and not work(SD card will not work when cid locked,hard spl-not work always 100% then message image corrupted,No kitl.....so please only original solution not from xda-developers..etc.
thanks for all.
Pozdrav zemljacima iz Srbije.
Pozdrav,
Ima nas prilicno sa SPL 2.03...
Igor
gsmhackerns said:
Many people try to unbrick spl 2.03 stack in boot no gsm and kitl mode and can not boot os just led light when power up...can go in bootloader bat this is all!!!.
I speak with imei-check abaout this and they told me that can repair this and it will cost 60pounds+ Here is message from imei-check.co.uk to me Hello,
You must send the device to us. The cost is 60 GBP + 15 gbp postage fee to return it back to you (or 7 GBP if we send it back to a UK address). In the day we receive it, we fix it, and next working day we send it back to you.
If you want to go ahead, please send the device + battery
(i think just need to open temporaly cid unlock in spl and this will help i mean from dos prompt,blank screen+ then flash??)and i must sent from Europe Union country .I live in Serbia and think that solution to unbrick hermes existed bat not want to tell many people......?? I will work in this now and i hope that solution will be for free when fix this.. I unbrick many hermes.artemis...etc..in Serbia bat this solution to unbrick hermes with spl 2.03 temporaly can not not have time to try?. I now will try many solution and will post here when fix this,you can trust me??....
....
Click to expand...
Click to collapse
Glad to hear that.
I am sure that the sulotion for spl 2.03 exists, but we don't know where to find it.
BTW, where is POF & olipro????
I made some progress, it stuck at OS screen now. It booted os several times today, it is strange that it can boot OS it is IPL 1.04 SPL 2.03. Stil NoGSM
koorosh_bsboys can you hermes boot OS?
Can NoGSM problem be solved with Flashing from SD Card?
igord said:
I made some progress, it stuck at OS screen now. It booted os several times today, it is strange that it can boot OS it is IPL 1.04 SPL 2.03. Stil NoGSM
koorosh_bsboys can you hermes boot OS?
Can NoGSM problem be solved with Flashing from SD Card?
Click to expand...
Click to collapse
My hermes can't boot into OS. It has stucked on 2nd splash screen (Imate telstra logo) not the OS logo!
How can u boot into OS?
If you find something new then share it with us.
My HERMES sometimes stuck at second boot scree and sometimes at windows screen, but few times it booted os. Than I put SSPL at microSD, becouse it stuck after few sec when it is on USB. OS is working ok - then I killed it again to SPL 2.03 and today get it back to working OS, No GSM.
What I did to get working OS???
1. Get battery out for about a day.
2. Put the battery in, DON'T POWER ON!!!
3. Do a HARD RESET.
If it don't work try several times.
after update my hermes my phone dosent start windows after another upfate with a shipped rom the phone finish the update but stil dident start windows any suggest
ipl.1.01
spl 140 olipro
londere said:
after update my hermes my phone dosent start windows after another upfate with a shipped rom the phone finish the update but stil dident start windows any suggest
ipl.1.01
spl 140 olipro
Click to expand...
Click to collapse
You might need to reflash it. Hold the two soft keys and then push the reset button. it will ask to hard reset. If the phone fails to come on after the hard reset, then hold the left 'ok' key and the power button, and then push the reset under the phone- this will take you to a tricolor screen where you can then re-flash the phone. try reflashing with official rom's, before using any other roms.
yes i do but it still in boot any sugest ipl 1.01 spl 1.40 olipro if any know how to update ipl with hard spl or how to remove hard spl it will be aprecible
My suggestion would be to try using sd to reflash the rom and see if that orks. format sd card making sure its fat 32 then put .nbh file in root directory. rename to herimg.nbh then insert into phone. go to bootloader and it should start the flash straight away. if this works make sure you upgrade spl to olipro 2.10 hard spl so its easier if there are problems. you can possibly upgrade spl this way too (get nbh file and rename hermimg.nbh). I tried this on my herme 100 and it seemed to work. it will flash the spl BUT when it restarts it will go straight to bootloader and start flashing again. as soon as it restarts get the sd card out and put on the os you want to flash. insert card and as long as you've named it hermimg.nbh it should flash new os with spl olipro 2.10. Good luck flashing.
You should read the wiki first : http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
your phone can be unbricked using the information on wiki.
only enter to bootloader the ipl dosent start also i fla**** but it stil apear spl.140oli whei in flash it with hard spl 1.10 and when i flash it with spl 2.60 oli it send me a error i try to flash it with qtek-cingular-doppod roms and nothing any suggest
any fu**ing suggest?
also it avoid me to update spl im stuck on hard spl 1.40 and ipl 1.04 i try to flash hspl 260-210 but it refiuses to stay in 1.40 radio 1.27 patched the ipl works but it frezzes with the green led dosent apear nothing
my device still blocked in boot mode i dont know if it is briked the device had the following info
ipl 1.04
spl1.40 oli
radio maybe no
os no
any suggest
any sugest to save my hermes
follow the unbrick guide link that koorosh_bsboys posted
it cant be unlocked its stuck in spl 140 olipro
did you follow the unbrick guide that koorosh_bsboys posted?
just stop trying any unauthorised ideas. let me know if i can help u. i have a friend in o2 service centre here in india. he can get ur device working. he does it by help of a software and 3 cables . it takes about 2 hrs. just let me know if u want ur device to work again
stil zombie my device im getting crazy any ideas
londere said:
stil zombie my device im getting crazy any ideas
Click to expand...
Click to collapse
If you want people to help you, you have to help yourself first!
1st of all, have you gone to read the Wiki as suggested?
2nd what methods have you tried to unbrick your device?
If you can't answer these questions then we can not help you, you keep asking for suggestions but you do not even reply to other's questions!
Here's a good place to start helping yourself if you haven't already http://forum.xda-developers.com/showpost.php?p=1465974&postcount=1
Hi,
well when i tried to make the update to WM6, the install crached and the prophet now boot only on Bootloader with the ipl 2.2.... 001 et SPL 2G3.
I don't know why the SPL changed to G3 ???
I tried to put the official ROM Qtek no vender but it's blocked at 80% with the error 274 after this I tried the step 1 PVTEMP but only the updateROMG3.exe working until 100% but nothing work after. and I'm still on Bootloader
I don't know what to do So PLEAZ HELP ME
THANK all
zolivier said:
Hi,
well when i tried to make the update to WM6, the install crached and the prophet now boot only on Bootloader with the ipl 2.2.... 001 et SPL 2G3.
I don't know why the SPL changed to G3 ???
I tried to put the official ROM Qtek no vender but it's blocked at 80% with the error 274 after this I tried the step 1 PVTEMP but only the updateROMG3.exe working until 100% but nothing work after. and I'm still on Bootloader
I don't know what to do So PLEAZ HELP ME
THANK all
Click to expand...
Click to collapse
Your device is pretty much useless... You could try contacting Olipro (do a search of members), but he will charge for any service he does...
Other than that, I can think of no way of getting it back up and running. There may be some MTTY commands, but nothing obvious.
thank you
i tried to contact olipro but no answer yet
I search on the forum some information conserning MTTY but without the wiki there is no command interesting for my problem do you have a site about command MTTY or the procedur maybe to change the SLP G3 to a G4.
OR maybe there is an hardware methode to reset the SLP ???
zolivier said:
thank you
i tried to contact olipro but no answer yet
I search on the forum some information conserning MTTY but without the wiki there is no command interesting for my problem do you have a site about command MTTY or the procedur maybe to change the SLP G3 to a G4.
OR maybe there is an hardware methode to reset the SLP ???
Click to expand...
Click to collapse
In theory, there is JTAG that can write direct to the Hardware, but no one has ever managed to get that to work...
I don't know any MTTY commands nor do I know where to find them, but I think there is a way to write direct to the memory...
In theory there might be the JTAG option, but the DOC wich is used in the regular prophet doesn't allow the JTAG connection...so if you don't have a "beta" Prophet there won't be a possibility of using Jtag
Hi,help me pliiiiiiiiz!!!!!
1-my herm100 stuck on windows screen
2-i tried mtty : CMD>task 32
Level=FF
how can i turn it ==>Level=0?????
infos:bootloader:2.03
error 'NO GSM' ???
i tried installing a lot of RUU ROM WM5&WM6 ==>error at 1%
what can i do pliz??help me
hi anf evils
u using a vista pc?
no im using win xp
Try reflashing the SHIPPED STOCK ROM - the rom it came with. This may fix your No GSM problem.
Please note though that once the radio rom gets stuffed it is a SERIOUS pain to get working with a very low success rate.
Good luck...
ultramag69 said:
Try reflashing the SHIPPED STOCK ROM
Click to expand...
Click to collapse
how can i do it, i think that my phone should boot to do it?
my herm stuck on windows mobile screen
and thanks for your replay!
Try a hard reset, hold both soft keys in and reset with stylus. Hold all buttons in until it asks if you wish to reset to factory. Follow directions.
If you haven't already, install Hard SPL, quick search will find it. Then you have to find the ORIGINAL ROM YOUR HERMES CAME WITH... Good luck as this is probably the hardest part...
No guarantees it will work though...
Cheers...
ultramag69 said:
If you haven't already, install Hard SPL,
Click to expand...
Click to collapse
i can not install any hard SPL because i have Level=FF so i can not downgrade to SPL 1.09 or 1.01 (i have now 2.03)
is there solution of this problem
Level=FF??????????????
LEVEL=FF
means that your device is CID locked. I've got the same issue
IPL 1.04
SPL 1.40OLI
NO GSM
NO O/S
someone who can help me
Has been seen, many times. Search "No GSM error"...
See my IPL AND SPL i dont find any solution for this can same one help me
Now I have
IPL 1.01
SPL 1.40oli
NO GSM
and can´t flash any RADIO
please help-me
eclipsept said:
Now I have
IPL 1.01
SPL 1.40oli
NO GSM
and can´t flash any RADIO
please help-me
Click to expand...
Click to collapse
have you SuperCID your phone as of yet? Sounds like it is not unlocked.
Try that, and let me know if that makes a difference.
Cheers
It sounds like the radio rom is corrupted... If you can try to flash the ORIGINAL SHIPPED STOCK ROM on to your hermes... It MIGHT fix the "No GSM" error...
If this doesn't work then you won't be able to use the Hermes as a phone again but you can load other OS's on and use as a PDA....
mikendawn, Super CID WON'T work to repair the radio rom. You seem to think its the be all and end all solution... Unfortunately this isn't the case...
Loading Hard SPL V7 on is as good as Super CIDing your Hermes as all it does is allow you to put other carrier/cooked roms onto your Hermes and allow you to use them.
No, not quite that, I thought his phone wasn't SuperCID. I didn't think it was the end all solution. Just thought it sounded like his phone was CID Locked.
Cheers
here can find a original rom for my phone