When i go to open any type of flashing program as in Custom_RUU.exe or Raphaelwrapper.exe i get this error "The application failed to initialize properly (0xc0000135). Click ok to terminate this application." i have flashed multiple times before but never on this computer. I am running windows xp pro. Please and thank you.
Maveaxe said:
When i go to open any type of flashing program as in Custom_RUU.exe or Raphaelwrapper.exe i get this error "The application failed to initialize properly (0xc0000135). Click ok to terminate this application." i have flashed multiple times before but never on this computer. I am running windows xp pro. Please and thank you.
Click to expand...
Click to collapse
I believe NetCF is required for the flashing programs. Do you have that installed on that computer?
If all else fails, you can always flash via SD card, per the sticky guide to flashing...
Thanks for the help. it wasnt Netcf but close it was Microsoft .NET Framework 3.0. that is needed for flashing programs to run.
Maveaxe said:
Thanks for the help. it wasnt Netcf but close it was Microsoft .NET Framework 3.0. that is needed for flashing programs to run.
Click to expand...
Click to collapse
That's actually what I meant. Obviously, you wouldn't want the compact framework (CF) on your PC... I was a little sleepy last night...
Hopefully, I pointed you in the right direction at least...
Related
I am trying to install the HardSPL on my device (Cingular 8525). I downloaded the Hard-SPL-V7.zip file and unzipped it. I activesync and everything was fine. I waited till activesync was done.
Then, when I double click on the RUUWrapper.exe file, it says
The application failed to initialize properly (0xc0000135). Click on OK to terminate the application.
Any suggestions on what I could be doing wrong. This happens on all the computer that I tried.
ftarules said:
I am trying to install the HardSPL on my device (Cingular 8525). I downloaded the Hard-SPL-V7.zip file and unzipped it. I activesync and everything was fine. I waited till activesync was done.
Then, when I double click on the RUUWrapper.exe file, it says
The application failed to initialize properly (0xc0000135). Click on OK to terminate the application.
Any suggestions on what I could be doing wrong. This happens on all the computer that I tried.
Click to expand...
Click to collapse
Check out www.mrvanx.org
Might you be using Vista???
What version of VBScript is on your machine???
Why am I using three question marks???
do u have microsoft .net framework installed?
ftarules said:
The application failed to initialize properly (0xc0000135). Click on OK to terminate the application.
Click to expand...
Click to collapse
A very similar problem has driven me crazy for weeks when I started messing with the Hermes. In my case, there were several versions of the RUU that would bomb if run from a network drive.
Copy them to the desktop and see if it works. Hope it helps
Solution
Code:
http://www.microsoft.com/downloads/details.aspx?familyid=0856eacb-4362-4b0d-8edd-aab15c5e04f5&displaylang=en
ftarules said:
I am trying to install the HardSPL on my device (Cingular 8525). I downloaded the Hard-SPL-V7.zip file and unzipped it. I activesync and everything was fine. I waited till activesync was done.
Then, when I double click on the RUUWrapper.exe file, it says
The application failed to initialize properly (0xc0000135). Click on OK to terminate the application.
Any suggestions on what I could be doing wrong. This happens on all the computer that I tried.
Click to expand...
Click to collapse
If you search for that error code on Google most of the replies point you to meeding .net framework.
I found this out after clearing out my laptop and not being able to flash Roms which worked before - reinstalling .net cured the problem
Anyone having trouble installing .net cf 3.5 after upgrade to DCD 3.1.2 ROM? I keep getting an error message.
Anyone having trouble installing .net cf 3.5 after upgrade to DCD 3.1.2 ROM? I keep getting an error message.
Click to expand...
Click to collapse
.NET cf 3.5 is already included in 3.1.2. No need to install it. Probably why you're getting error messages.
ah. that makes sense. thanks.
gc14 said:
.NET cf 3.5 is already included in 3.1.2. No need to install it. Probably why you're getting error messages.
Click to expand...
Click to collapse
when i try to run live search says i need to install net3.5??? im on dcd 3.1.2 and i get the same error when i try to install
I found this on MSDN forum and it worked for me.
Problem solution:
Giving the installation error:
"Installation error. Stop all applications and processes, maximize available storage space, and run installation again. Support info: 3"
Solution:
1. download mobile registry editor
2. delete entry \local machine\software\microsoft\netcompactframework (delete all of it)
3. re-install net compact framework 3.5
I take no responsibility for any problems that you may encounter after editing your registry. As always, proceed at your own risk.
I don't know what the problem was on your phones....maybe a bad flash...
3.1.2 has cf 3.5. It's located in the SYS folder of your kitchen in a directory called NetCF35 and gets cooked in.
not sure. but net 3.5 didnt show up in list of programs until i installed it myself. i probably already had it. no harm no foul.
prattner said:
I found this on MSDN forum and it worked for me.
Problem solution:
Giving the installation error:
"Installation error. Stop all applications and processes, maximize available storage space, and run installation again. Support info: 3"
Solution:
1. download mobile registry editor
2. delete entry \local machine\software\microsoft\netcompactframework (delete all of it)
3. re-install net compact framework 3.5
I take no responsibility for any problems that you may encounter after editing your registry. As always, proceed at your own risk.
Click to expand...
Click to collapse
Great tip!
This worked for me with the same problem installing NETCFv35 on a Diamond.
prattner said:
I found this on MSDN forum and it worked for me.
Problem solution:
Giving the installation error:
"Installation error. Stop all applications and processes, maximize available storage space, and run installation again. Support info: 3"
Solution:
1. download mobile registry editor
2. delete entry \local machine\software\microsoft\netcompactframework (delete all of it)
3. re-install net compact framework 3.5
I take no responsibility for any problems that you may encounter after editing your registry. As always, proceed at your own risk.
Click to expand...
Click to collapse
Does 3.5 contain everything that 2.0 has? Meaning will programs running with 2.0 work the same with 3.5?
yes
i have not seeen the case where having 3.5 installed gives you an error for not having 2.0
GeLopez said:
yes
i have not seeen the case where having 3.5 installed gives you an error for not having 2.0
Click to expand...
Click to collapse
Well, I tried what was suggested and it still didn't work.
prattner said:
I found this on MSDN forum and it worked for me.
Problem solution:
Giving the installation error:
"Installation error. Stop all applications and processes, maximize available storage space, and run installation again. Support info: 3"
Solution:
1. download mobile registry editor
2. delete entry \local machine\software\microsoft\netcompactframework (delete all of it)
3. re-install net compact framework 3.5
Click to expand...
Click to collapse
Worked great! Thanks for the tip. It was driving me crazy
prattner said:
I found this on MSDN forum and it worked for me.
Problem solution:
Giving the installation error:
"Installation error. Stop all applications and processes, maximize available storage space, and run installation again. Support info: 3"
Solution:
1. download mobile registry editor
2. delete entry \local machine\software\microsoft\netcompactframework (delete all of it)
3. re-install net compact framework 3.5
I take no responsibility for any problems that you may encounter after editing your registry. As always, proceed at your own risk.
Click to expand...
Click to collapse
YEES! Works HTC TOUCH HD BLACKSTONE
or by changing the DWORD Value! NET CF 2.0 to replace its dword value to = 0, whereas NET CF 3.5 dword value = 1
Well, up until now, I have just used DCD's ROM's without customizing then, but I thought I would give the kitchen a shot. So, I downloaded DCD's latest and greatest kitchen of v3.2.2, also downloaded the .Net 2.0 link EXE fil from his page and tried to install it (cause you need it to run the kitchen) but I get an error, says that it is "incompatible with the previously installed version of .net"
so, i tried uninstalling all my .net stuff in add/remove, rebooting, and installing this, and still wont let me. i tried windows update and updated to 3.5, had 1.1 and 2.0 downloads as well, and nothing will work.....net will not install at all, no matter what version.
so i cannot get the kitchen to run...help....?
:: Connor
did you restart the computer? after, did you delete the entire extracted folder of the kitchen and re-extract it? that always works for me.
Using DCD's (BuildOS) Kitchen with Vista
If you have UAC active on Vista here is what I suggest. If you are seeing issues with default.hv, user.hv, boot.hv most likely you have a permissions issue. Delete your extracted directories - Create a Root folder, such as Kitchen - Select Properties of that folder in Explorer - Go to the Security Tab and choose Edit - highlight your Users group and choose full control and then OK. Extract your kitchen files into this location. Logic would tell you that you should be able to just change the permissions on your folder once you extract it - UAC and logic don't necessarilly run together.... So once you've created a Root directory, set the security, extracted the kitchen into this location - run buildNB.bat as you would anything else - good luck.
The same issue applies to Vista and .Net errors (.Net 2.0 is default in Vista)
lol @ Vista...who uses Vista? hehe.
crobs808 said:
lol @ Vista...who uses Vista? hehe.
Click to expand...
Click to collapse
Was that really necessary? You are asking for help, and decide to bash controversial/fairly useful software in the same thread. Use your brain, kiddo!
I use Vista. Works great. I also have an XP desktop.
Heck I still have a notebook running windows 95 on it.
Whats it to you?
Was that really necessary? You are asking for help, and decide to bash controversial/fairly useful software in the same thread. Use your brain, kiddo!
Click to expand...
Click to collapse
Yeah this is the same kid who claims he is the only one that has nevo remote working, even though it doesn't work on EVERY other Titan. He's also the one that says he can magically send MMS messages without any software to do so. I'm starting to smell the bs from all the way here in Boston.
crobs808 said:
Well, up until now, I have just used DCD's ROM's without customizing then, but I thought I would give the kitchen a shot. So, I downloaded DCD's latest and greatest kitchen of v3.2.2, also downloaded the .Net 2.0 link EXE fil from his page and tried to install it (cause you need it to run the kitchen) but I get an error, says that it is "incompatible with the previously installed version of .net"
so, i tried uninstalling all my .net stuff in add/remove, rebooting, and installing this, and still wont let me. i tried windows update and updated to 3.5, had 1.1 and 2.0 downloads as well, and nothing will work.....net will not install at all, no matter what version.
so i cannot get the kitchen to run...help....?
:: Connor
Click to expand...
Click to collapse
tried getting a new computer?
coffey_joshua said:
tried getting a new computer?
Click to expand...
Click to collapse
If you read his blog, he actually sells (overpriced) computers. Once again, I think gc has properly diagnosed what's going on.
I have a similar problem with 3.2.0 but my screen is stuck on the vzw screen stuck ...is there anything I can do to fix this ?
thanks
gc14 said:
I'm starting to smell the bs from all the way here in Boston.
Click to expand...
Click to collapse
Whoa and that's saying a lot, given the way that bean town must smell; I mean they call it bean town for a reason, right ?!
Yeah...though I think they should rename it Sports-town for the way that our sports teams beat everyone else's asses all the time....
gc14 said:
Yeah...though I think they should rename it Sports-town for the way that our sports teams beat everyone else's asses all the time....
Click to expand...
Click to collapse
... and he knocked that one right over the center-field wall
gc14 said:
Yeah...though I think they should rename it Sports-town for the way that our sports teams beat everyone else's asses all the time....
Click to expand...
Click to collapse
Now who's shoveling the bs.....
OH - wait, they kinda did spank my Lakers..... guess I'll go back to the corner now.....
No it is ok as Bean-town, only used as a verb. Still has the sports connotation, and can be used both offensively and defensively, and in all the sports Boston offers (Hockey, BB, Baseball, Football, etc).
Verb
To bean.
1. To hit with a projectile, accurately.
The pitcher beaned the batter, rather than letting him hit another home run.
I have tried to run DCD's latest kitchen on multiple computers and every time I run BuildNB, it crashes when it tries to start BuildOS.
I have tried it on WinXp Sp2, WinXp Sp3, a bare install of Winxp SP2. I have tried it on all versions of Dot Net....
Still no love for me!!! :-(
WTF am I doing wrong???
EDIT:
Ok the issue was a path problem, apparently there was an issue where if I tried to run it from My Documents folder or the Desktop folder that the path was too long.
I moved the kitchen folder to the root of C:\ and it ran perfectly.
Hope this helps others that have the same issue!
Thanks everyone for your help in figuring out the issue.
2K3GTP said:
I have tried to run DCD's latest kitchen on multiple computers and every time I run BuildNB, it crashes when it tries to start BuildOS.
I have tried it on WinXp Sp2, WinXp Sp3, a bare install of Winxp SP2. I have tried it on all versions of Dot Net....
Still no love for me!!! :-(
WTF am I doing wrong???
Click to expand...
Click to collapse
Have you installed Visual C++ 2008 Runtime?
http://www.microsoft.com/downloads/...34-3e03-4391-8a4d-074b9f2bc1bf&displaylang=en
It is required along with .net version greater than 2.0
Yes, I have installed it even though it is no longer required for DCD's latest kitchens, but BuildOS still crashes...
Sorry, that's all I've got. Hopefully someone else can chime in.
2K3GTP said:
Yes, I have installed it even though it is no longer required for DCD's latest kitchens, but BuildOS still crashes...
Click to expand...
Click to collapse
Is it crashing immediately.....have you run it before?
It worked when I cooked a DCD ROM a few months ago, now with the new kitchen it starts to move the modules then BuildNB calls BuildOS and it crashes immediately. I can click on BuildOS.exe and get the same result.
You're extracting the folder from the rar file and not just running BuildNB.bat from the archive correct?
Yes, that is correct. I am also an admin on these PC's and I am running it of a network drive but if I copy it locally it also fails so that is not an issue.
This is making me nuts.
2K3GTP said:
It worked when I cooked a DCD ROM a few months ago, now with the new kitchen it starts to move the modules then BuildNB calls BuildOS and it crashes immediately. I can click on BuildOS.exe and get the same result.
Click to expand...
Click to collapse
Have you downloaded it again? Sounds like a corrupted download......
This is what the debugger says:
An unhandled exception of type 'System.IO.DirectoryNotFoundException' occurred in mscorlib.dll
Additional information: Could not find a part of the path 'C:\Documents and Settings\user\Desktop\dcd_titan_kitchen_3.2.6\dcd_titan_kitchen_3.2.6\TOOLS\SYS
Did you re-download the kitchen again??
path too long?
try to extract the archive to a folder on the root of C:, like "DCD326" and run it from there. there may be a limit to the length the path to a file can be. good luck...
I am unable to open the new updates. 20090811 or 20090906. I keep getting the error
"Microsoft Visual C++ Runtime errror" "The Application has requested the runtime to terminate in an unusual way"
I don't know what to do about this. the older versions work fine. I reflashed with the 20010801 just to see and it flashed fine.
This is the same computer I always flash from. Like I said i can flash the older roms. Nothing has changed on the computer. I have installed no new software or hardware. I ran a Microsoft update after this problem came up to try and resolve it... no difference.
I cannot get a response in the energy rom thread, probably because it's 600 pages long. I have searched and found nothing.
Any Ideas?
flash it using SD card
I just ran into the same problem... Unzip it again, make sure there is only 2 files in the folder, then rename the folder.. The folder name is too long so it wouldn't work.. Just flashed successfully Thanks NRG!!!!
tweakedlogic said:
I am unable to open the new updates. 20090811 or 20090906. I keep getting the error
"Microsoft Visual C++ Runtime errror" "The Application has requested the runtime to terminate in an unusual way"
I don't know what to do about this. the older versions work fine. I reflashed with the 20010801 just to see and it flashed fine.
This is the same computer I always flash from. Like I said i can flash the older roms. Nothing has changed on the computer. I have installed no new software or hardware. I ran a Microsoft update after this problem came up to try and resolve it... no difference.
I cannot get a response in the energy rom thread, probably because it's 600 pages long. I have searched and found nothing.
Any Ideas?
Click to expand...
Click to collapse
reinstall Microsoft Visual C++
http://www.microsoft.com/downloads/...ee-a3f9-4c13-9c99-220b62a191ee&displaylang=en
TNPaparazzi said:
I just ran into the same problem... Unzip it again, make sure there is only 2 files in the folder, then rename the folder.. The folder name is too long so it wouldn't work.. Just flashed successfully Thanks NRG!!!!
Click to expand...
Click to collapse
i got the same error, but renaming the folder and putting it on C: worked for me too
Do you guys ever search for solutions???
Guys,
A simple search in the NRG latest ROM thread would give you the solution in seconds.
Rename the folder so there are NO spaces in it (i.e. "EnergyROM_RAPHAEL_20090905_Standard") and just to be on the safe side, use a "Custom_RUU" from an older build.
Happy flashing!
Had the same problem, renaming the folder resolved it.
i just redownloaded it....and it worked