I'm looking for change my cooked ROM to a new cooked ROM, but after mtty reset my touch dual is in black screen and doesn't connect to activesync!
PC ask for Data Interface installation when connect HTC via usb
How I do upgrade new rom now?
Thanks,
Christian.
try mtty and make a search
try the mtty ... did not it work on with u....? i hope u best . also my x1i is broken down for these days... it wasn't a try to change the rom , it was just a language support....
Related
Hya
I tried to downgrade my MDAII from the ROM 1.72 to ROM 1.66.
But after downgrading it, it looks like my MDA II is dead now...
It doesnt do anything anymore
Now I got a white screen with upper writing "SERIAL"
and down "V1.03" and no backlight at all...
Can somebody help/guide me how to fix my device?
I'm a newbee and need yoru help
Many thanks.
'Serial' just means that its trying to communicate in Serial mode, if you drop it onto the dock/charger (assuming that is connected to your PC) the word 'Serial' should change to 'USB'. If it does then try the downgrade again.
VW_ELM said:
I tried to downgrade my MDAII from the ROM 1.72 to ROM 1.66.
But after downgrading it, it looks like my MDA II is dead now...
Click to expand...
Click to collapse
Don't worry, it's not dead. If the downgrade process completed normally, you just need to do a hard reset (press power button while holding stylus in reset hole). If this doesn't help, the downgrade failed.
The most likely reason is that you connected the cradle to a USB hub. Try connecting it directly to your PC, then perform the flash procedure again.
Another possibility is that you used Windows 95/98/ME. Some users have reported problems. Try the flash procedure from a Windows 2000/XP system again.
Hope this helps!
Daniel
nope it doesn't work, i've got the same problem!
Don't know what to do...
Thanks tadzio: B4 l have same problem Rom failure , and l try to reinstall
again, flash Rom now :lol:
I post a original latest belgian rom on this forum (rom from dangard), try to install this version.
http://forum.xda-developers.com/viewtopic.php?t=8403&postdays=0&postorder=asc&start=75
you need to dowload this file (a shortcut) on your pc, then execute it following the procedure.
Bye
I solved the problem for me:
With HimaUpgradeUt.exe there was no connection. It was a too old version (0.5.0.0).
So I replaced it with Version 0.6.0.0 and it runs !!!
Hello
I have a problem with my Prophet and he needs to go to the factory..i need to install wm5 ,i have a wm6 rom and when i downgrade to wm5, the pda goes to bootloader and appears the following window:
ERROR 302 UPDATE ERROR
The Rom Update Utility has encountered communications errors during the update process. The Program will guide you step-by-step to recover from the errors so you can continue with the update!
I have the following advice but it stop´s on bootloader..
Need urgency help! Tks
tiagofa said:
Hello
I have a problem with my Prophet and he needs to go to the factory..i need to install wm5 ,i have a wm6 rom and when i downgrade to wm5, the pda goes to bootloader and appears the following window:
ERROR 302 UPDATE ERROR
The Rom Update Utility has encountered communications errors during the update process. The Program will guide you step-by-step to recover from the errors so you can continue with the update!
I have the following advice but it stop´s on bootloader..
Need urgency help! Tks
Click to expand...
Click to collapse
if u are in Bootloader mode the one in three color mode.. U can downgrade surely with PDA viet temp.
In Boot loader mode just reconnect your device to pc through USB . and launch the PDA VIET program..
It should be work.
doesn´t work..
is there any connection with SD slot card doesn´t work ?.. ?? :S
help.. :S
u r using vista right?
u should do that with xp
be sure that with xp u can fix it 100%
no, i+m using xp.. still doens´t work..
i think my prophet dies :S
try flashing NVID wm5 when in bootloader. if you were successfull flash HardSPL and after that you original ROM!
First, disable any firewall
Put the prophet in bootloader (3-clored screen) by pushing CAM button and punching the reset hole at the bottom. When you realease the stylus, the colors should appear.
Then, before connecting your prophet to the PC, first DISable the "Allow USB connection" option in the connectionsettings box of ActiveSync.
After that connect the bootloadermoded Prophet to your PC, it conects as an ordinairy USB device. Then run the RUU of your choice.
probably the better idea is to send a snapshot of your display in fault mode.
do that with a camera. it could be useful to identify the state of your error.
i'm not skilled but here you can find a pool of powerfull developers.
jork
problem solve
problem.. usb port lol :S
i buy atom pure from my friend,i have problem to revert back.this atom pure already upgrade to atom exec window mobile 6 profesional 5.2.1413 (18508.0.7.0).but have problem with phone,cant make a call os sms.now im planning to revert back to wm5 original. i already try download original rom Xda-Atom-ENG-20060426-MOT0822.exe but still cant flashing.and show "eror:connection eror"
do i need flash my bootloader 1st?then running then run Xda-Atom-ENG-20060426-MOT0822.exe ?
what file need to copy in the sd card?
nitrospeed said:
i buy atom pure from my friend,i have problem to revert back.this atom pure already upgrade to atom exec window mobile 6 profesional 5.2.1413 (18508.0.7.0).but have problem with phone,cant make a call os sms.now im planning to revert back to wm5 original. i already try download original rom Xda-Atom-ENG-20060426-MOT0822.exe but still cant flashing.and show "eror:connection eror"
do i need flash my bootloader 1st?then running then run Xda-Atom-ENG-20060426-MOT0822.exe ?
what file need to copy in the sd card?
Click to expand...
Click to collapse
Try press "camera button" + "reset button" then plug your usb cable and
run your original rom.
Cheers,
Benz
still cant flashing."error : connection error"
nitrospeed said:
still cant flashing."error : connection error"
Click to expand...
Click to collapse
Have you installed activesync 4.5 btw??? If yes continue to read below, if not get activesync first.
change USB cable, it may be deffective. any cable will do, motorola, canon digicam et al. then try steps below
put device in bootloader mode: camera button + reset hole
plug usb device then run original ROM.
read the wiki thats why it's there!!!!
maybe help
try flashing it while its still connected via active sync and not in the bootloader mode if its still show error connection mode then it must be the rom is not compatible for ur device or there is really a problem with the connection
ok i found the solutions.i try search for 2 days.then i found this.
http://www7.discuss.com.hk/archiver/?tid-5578529.html
now im working on it.i hope it successfull
hi friends,
i have one swisscom xpa s200.
i bought this phone with this problem-when i power on,on the screen is only firs splash screen with ipl/spl=2.20.0001
i tried every WIKI method to recovery this device but no luck.
i dont have one official swisscom xpa s200 rom.
what is the problem,can you help me ?
thanks in advance.
greetings from serbia.
MS
Tell me if it works
Go and try get the original rom then enter bootloader mode to flash.Flashing may only be done on xp computers.Get the original rom from this xda site go 4shared.com or the original phone brand site
how to:
1. charge your device
2. make sure you have activesync installed.. if installed you will see an ActiveSync icon on the lower right part of your desktop right click it click connection settings and UNCHECK allow USB connections then press comm+cam +soft reset button to force your device on bootloader, you should see USB on the lower left screen of your device.
3. Download the NVID_RUU.zip extract it and RUN ( it has only one RUU, so it doesnt matter if your device is G3 or G4 )
4. after flashing the RUU and its succesfull try allowing USB connection again on Active Sync..
5. if its still not working.. try downloading the PV_Temp NVID RUU, i dont have a copy of this so try searching for this in the forums..
goodluck!!
PS: you can also read stiky threads over Prophet Mobile 6 Forum
NVID RUU : http://www.mediafire.com/?0wilzm3vzeo
Hi,
I'm having problems with my niki100. When I power it up, it stucks in the second screen with the red letters at the bottom giving the radio version and other data.
The problem started after flashing a new rom:
PTG cleanblack wm 6.5 "showthread.php?t=689898"
Before installing this rom I was tring the ROM from Dj_series VA11, but there were some problems to get the phone to work, it was going to offline mode not setting up the connection to the mobile operator. Befrore changing any rom I've done the hardspl 1.22.
Now it's not working, I've done a hardreset, but it's the same, I can´t get active sync to work in order to do some flashing, I tried to enter to bootloader pressing camera and power button, the 3 color menu says USB when connecting the usb cable but on the labtop theres no port associated in device manager and no possible communication between niki and PC.
Any help would be thankfull..
Problem solved !
I've tried to flash it again through sd card with the same rom and the problem remain. After that I've changed the image on the sd card to the previous version (Dj series) , renamed the image on sd, camera*rst* and power button simultaneous, flash from sd and it went ok.
It's working now !
Thanks anyway
hello
can you please help me, my dual is on the same status as yours but i dont have SD :s but he goes to Bootloader and when i try to update erro ID Vendor, if i try to HDspl ou sspl the same erro..
can anyone help please..